98234Complainant Submission - Nova Scotia Power Inc. Utility Service Requirements 2023 Edition - Effective May 1, 2023
5 passages
Service Box: An approved assembly consisting of a metal box or cabinet constructed so that it may be locked or sealed, containing either service fuses and a service switch or a circuit breaker, and of such design that either the switch or...
AI summary The Service Box is defined as an approved assembly, typically a metal box or cabinet, designed to be locked or sealed and containing service fuses, a service switch, or a circuit breaker. It is constructed to allow manual operation of the switch or circuit breaker when the box is closed.
7 Large Electric Loads Operating large loads such as motors, electric furnaces, electric welders, air conditioners, heat pumps, etc., can produce momentary voltage sag or 'flicker': It is the responsibility of the Customer to ensure that e...
AI summary The document outlines the responsibility of customers to manage large electric loads to minimize voltage sag and flicker. It also emphasizes the need for consultation with the Supply Authority during the design phase to ensure adequate utility supply equipment, with potential charges for rework if this is not done.
A minimum of 150 mm and a maximum of 300 mm horizontally from the consumer's service head." F or 'under eave 'installations the horizontal distance may be increased to 500mm as shown on SS-ED-14M. - 8) Services that are not accessible by b...
AI summary The document outlines specific requirements for the horizontal distance between the consumer's service head and the point of attachment for utility supply conductors. It also specifies conditions for accessibility by bucket trucks, ladder access requirements, and the positioning of service attachments on buildings relative to NSP utility poles.
NSPI & BELL CANADA JOINT-USE DISTRIBUTION STANDARDS LOCATION OF REMOTE POWER CABINET FOR CATV JIM MCFADGEN, P.ENG FOR NSPI; FOR BELL; STEPHEN CUMMINGER, P.ENG M.HALASZ DRAWN: 2023-02-03 REV DATE: STD NO: J-ED-15M 2 OF 2 SHT: - 1. SERVICE H...
AI summary This document outlines joint-use distribution standards for NSPI and Bell Canada, detailing the installation requirements for remote power cabinets, service attachments, and related components. It includes specifications for materials, clearances, and responsibilities.
NOTES: - A. THE CUSTOMER SHALL BE RESPONSIBLE FOR INSTALLING THE SERVICE ATTACHMENT DEVICE TO THE BUILDING AT THE TIME OF CONSTRUCTION AND ENSURING THE ATTACHMENT WILL SUPPORT A HORIZONTAL LOAD OF 3kN. - B. MATERIAL REQUIRED FOR SERVICE AT...
AI summary The document outlines technical installation requirements for service attachments, including load support, conductor extensions, and clearance specifications. It also references charts and standards for cable sizes and connections, and specifies conditions under which service mast height requirements may be waived.