E-22021 DSM Evaluation Reports
29 passages
6.1 Market Transformation and Codes and Standards The literature review was first aimed at defining MT: "The strategic process of intervening in a market to create lasting change in market behaviour by removing identified barriers or explo...
AI summary The section discusses market transformation (MT) programs, explaining their strategic role in removing barriers to energy efficiency. It notes that as products become more efficient, traditional incentive-based programs face challenges. MT programs cover a range of technologies and include activities like training, code enforcement support, and marketing tool development.
Table 16: 2021 Recommendations on Business, Non-profit, and Institutional Program Components No. Recommendation Custom – R1 For Retrofit and Building Optimization, on a priority basis review, improve and deploy M&V processes, savings calcu...
AI summary This recommendation focuses on improving monitoring and verification (M&V) processes, savings calculation protocols, and service documentation for retrofit and building optimization programs. It emphasizes aligning these practices with best standards and enhancing service quality for participants in the 2022 Custom program.
Modelled Energy Consumption For each participant, HOT2000 simulations are used to model as-built energy consumption levels, i.e. the energy consumption of a new house as built, and the to-code energy consumption level representing the valu...
AI summary The document discusses the use of HOT2000 simulations to model energy consumption for each participant, distinguishing between as-built energy consumption and to-code energy consumption levels based on current building codes.
Table 30: 2021 Analysis of Key Factors in Program Planning Factor Results Market share of LED Despite declining industrial fixture (including LED fixture) shipments, which dropped by 39% between 2018 and 2020, the share of LED fixtures con...
AI summary The table discusses the market share of LED fixtures in the BNI sector, noting a continued growth in LED fixture sales despite a drop in industrial shipments. Distributors believe the market is nearing maturity but still has potential for growth.
2. Building Heating/Cooling System Description Heating Systems: Heating Systems: Please fill the table below for each heating system at the site Parameter Heating System 1 Heating System 2 Energy Source % of Heat Type of System Cooling Sys...
AI summary This section provides a template for describing building heating and cooling systems, including energy sources, system types, and occupancy schedules. It includes tables to be filled out with relevant data and a note about lighting operation schedules.
d achievement of maximum savings - •Eligible facilities must be 15,000 sq. ft. or larger - •Smaller projects under the Small Commercial NC pilot are included in this service Building Optimization - Technical and financial support to help o...
AI summary The document outlines eligibility criteria and support for building optimization and energy efficiency initiatives, including technical and financial assistance for investigations and no-cost/low-cost measures. EfficiencyOne (EOne) tracks savings for custom projects over multiple years, particularly for four types of projects in 2021.
Building Optimization A total of six Building Optimization projects reported savings in 2021 and all of them were completed in the same year. Although the number of projects completed in 2021 remains modest, it is comparable to the partici...
AI summary In 2021, six Building Optimization projects reported energy savings, but the average savings per project decreased compared to 2020. No peak demand savings were recorded, potentially due to some participants joining the OEM Operational Demand Savings Pilot, which focuses on peak demand impacts.
7.1 New Construction Participation Process and Influences on Building Design This section outlines the participation process for a typical New Construction project and sources of influence on participants' decisions to build better-than-co...
AI summary This section outlines the participation process for new construction projects and factors influencing decisions to build beyond code requirements.
Table 23: Typical New Construction Participation Process and Actions by Key Actors that Potentially Influence Building Design Stage Stage Typical Actions by Key Actors that Potentially Influence Building Design Number Name Duration Milesto...
AI summary This table outlines the typical new construction participation process and the roles of key actors in influencing building design. It details the stages, actions by NC staff, BDMs, and Energy Modelers, and highlights the Custom Project Agreement (CPA) as a key document in the process.
10 BUILDING OPTIMIZATION PARTICIPANT PERSPECTIVES As part of the Building Optimization project file reviews and follow-up interviews with participants, respondents commented on their experience and satisfaction with the service. All six pr...
AI summary Respondents expressed high satisfaction with the Building Optimization service, with an average rating of 8.5 on a 10-point scale. Delays in the incentive approval process and challenges in obtaining buy-in from space users were noted as areas for improvement. Some participants recommended shorter processing times and increased awareness among contractors.
2021 Building Optimization Participant Perspective Highlights - › Overall satisfaction with Building Optimization was high among interviewed participants who provided an average rating of 8.5 on a 10-point scale. - › Most respondents did n...
AI summary Participants in the 2021 Building Optimization program reported high satisfaction with an average rating of 8.5 out of 10. Most did not face challenges in their participation, and the main area for improvement identified was reducing processing times for application and incentive approvals.
11 BUILDING OPTIMIZATION IMPACT EVALUATION The objective of the 2021 Building Optimization impact evaluation was to determine gross and net electrical energy and peak demand savings, annually avoided GHG emissions, as well as EUL and assoc...
AI summary The 2021 Building Optimization impact evaluation aimed to assess gross and net electrical energy and peak demand savings, annual avoided GHG emissions, and energy usage lifetime savings. All six projects were initiated and completed, with final savings claimed.
11.2.2 Interactive Effects Since interactive effects vary significantly from one Building Optimization project to another, they are either taken into account in the project engineering calculations used to establish gross savings or includ...
AI summary The document discusses interactive effects in Building Optimization projects, noting that these effects vary and are either considered in engineering calculations or whole building data. For six projects, no interactive effects were observed, so no adjustments were made to gross savings.
Table 30: Evaluated 2021 Building Optimization Gross Energy and Peak Demand Savings Final Savings for Projects Started and Completed in 2021 Number of Projects 6 Energy Savings Tracked Gross Energy Savings – at the Meter (GWh) 0.494 Adjust...
AI summary Table 30 provides an evaluation of 2021 Building Optimization Gross Energy and Peak Demand Savings, including metrics such as energy savings, adjustment ratios, and lifetime energy savings. The table indicates that six projects were completed, resulting in 0.462 GWh of gross energy savings at the meter and zero peak demand savings.
Construction, they were of 0.839 and 0.898 respectively. For Building Optimization, the adjustment ratio for energy savings was 0.934. The Evaluator made several adjustments to the reviewed projects. For New Construction, the Evaluator not...
AI summary The Evaluator found that project files for New Construction were well-documented, but Retrofit and Building Optimization projects had methodological issues, such as M&V errors and missing peak demand savings data. Adjustments were needed in 46% of sampled files, and improvements are recommended for M&V processes and documentation.
B. Identifying Key Decision-makers - B1. We would like to speak with a person that played a key role in the decision to build a betterthan-code building. Are you that person? - 1. Yes - 2. No - 98. Don't know - 99. Refused - B2. [IF [B1=](...
AI summary The text outlines a process for identifying key decision-makers involved in the decision to build a better-than-code building, including questions about their roles and the involvement of others.
A. Identifying Key Decision-makers - A1. We would like to speak with a person that played a key role in the decision to build a betterthan-code building. Are you that person? - 1. Yes - 2. No - 98. Don't know - 99. Refused - A2. [IF [B1=](...
AI summary The text outlines a section of a regulatory proceeding aimed at identifying key decision-makers involved in the construction of a better-than-code building. It includes questions to determine if the respondent was a key decision-maker and, if so, to describe their role and provide information about other key individuals involved.
INTRODUCTION I am with _____ and we are performing an evaluation of the [Custom Retrofit or Building Optimization program] service offered by Efficiency Nova Scotia. This interview should take up to 30 minutes. Is this still a good time fo...
AI summary This introduction outlines an interview conducted by an unnamed organization evaluating Efficiency Nova Scotia's Custom Retrofit or Building Optimization program. The interview aims to understand the decision-making process of participants regarding their energy efficiency projects, with confidentiality assured and no impact on incentive amounts.
Satisfaction B1. Using a scale from 1 to 10 where 1 is "not at all satisfied" and 10 is "completely satisfied" how would you rate your satisfaction with the Custom [Retrofit or Building Optimization] program overall? Score: - B2. [IF B1<8]...
AI summary The text asks participants to rate their satisfaction with the Custom Retrofit or Building Optimization program on a scale from 1 to 10 and identify the single factor that, if resolved, would improve their satisfaction score if it is below 8.
Participant Perspectives - C1. How did you first hear about the Custom [Retrofit or Building Optimization] program? - C2. What motivated you to participate in the Custom [Retrofit or Building Optimization] program? - C3. Did you face any c...
AI summary The text outlines a set of questions aimed at gathering participant perspectives on the Custom Retrofit or Building Optimization program, focusing on how participants learned about the program, their motivations, challenges faced, and suggestions for improvement.
costs, and tradespeople availability. For each sub-question : Score : 98) DK/Refuse G2. We understand that your organization availed itself of the services of an Onsite Energy Manager during the time that this project was being considered...
AI summary The text includes a series of questions related to the involvement of an Onsite Energy Manager (OEM) in a project and the importance of their contributions to the decision-making process for implementing energy efficiency measures through a Custom Retrofit or Building Optimization program.
2. Envelope Review - › Check envelope resistance value (wall/fenestration/roof/etc.) and validate with shop drawings and construction details. Make sure that effective R/RSI – U/USI values are used in the simulation. - › Pay particular att...
AI summary The Envelope Review section outlines steps to verify insulation values, curtain wall effectiveness, fenestration-to-wall ratios, and compliance with code specifications in building energy efficiency simulations.
3. Parametrization and Zoning - › For buildings with a repetitive storey pattern, if the "Copy" function is used, the modeller often forgets to check the "Over conditioned space" option, which may create an "exterior floor". - › Verify the...
AI summary The text discusses issues related to parametrization and zoning in building modeling, highlighting that using the 'Copy' function for buildings with repetitive storey patterns may lead to errors if the 'Over conditioned space' option is not checked, potentially creating an 'exterior floor'. It also emphasizes the importance of verifying zoning for accuracy.
5. HVAC Systems This section can be very complex, depending on the building modelled, so the following should be considered as general guidelines. - › Validate that all HVAC inputs concord with shop drawings. - › In the case of a dedicated...
AI summary This section outlines guidelines for accurately modelling HVAC systems in buildings, emphasizing validation of inputs, system specifications, and software bugs to ensure correct energy efficiency measures and airflow calculations.
Table 2: Summary of MT Programs for Selected Jurisdictions Program Program Description Administrator Considered MT by the Regulator? Savings Counted Toward Targets? National Grid Massachusetts Residential and commercial building code promu...
AI summary The table summarizes market transformation (MT) programs in selected jurisdictions, including Massachusetts, Vermont, and BC Hydro. It discusses how these programs are considered for MT by regulators, whether savings are counted toward targets, and the methods used for savings estimation. BC Hydro's Step Energy Code is highlighted as part of its efforts to achieve net-zero energy readiness by 2032.
3.1.1 Targeted Markets MT programs target a variety of products and technologies. One common MT program across multiple jurisdictions is the ENERGY STAR RPP, which started being developed nationally in the US in 2016 11 and is being implem...
AI summary Market transformation (MT) programs aim to influence the adoption of energy-efficient products and technologies through initiatives like the ENERGY STAR RPP and specific programs developed by NEEA. These programs target a range of products and systems, including efficient rooftop units and heat pump water heaters. Building code compliance and local market research are also key factors in determining the effectiveness of MT strategies.
web page that compares the various options on the market for a given product, or explains the steps to get that product installed) and help them find a retailer or a contractor and/or rebate programs Activities to advance residential build...
AI summary The document discusses activities related to residential building codes, highlighting NEEA's Better Built NW program and BC Hydro's use of DSM budget for code enforcement. It also notes NEEA's new Commercial Code Enhancement initiative, which focuses on improving the code development process for clarity and efficiency.
Program Components Plug Load Controls EPI Smart Power Controller for Audiovisual Equipment Instant Savings Power Bar with Integrated Timer Instant Savings Heavy-duty Outdoor Timer Instant Savings ENERGY STAR® Certified Pool Pump Instant Sa...
AI summary The document outlines various program components under different categories such as Plug Load Controls, Demand Reduction, Lighting, Pumps, Space Heating, and Water Heating. These components include initiatives like the Efficient Product Installation (EPI) program, Home Energy Assessment (HEA), and Business Energy Rebates (BER).
Table 110: Interactive Effects for BNI Lighting Measures Measure Interactive Effects Factor for Energy Savings Interactive Effects Factor for Peak Demand Savings LED Lamps -8.3% -20.9% Recessed -6.4% x 57% = -3.6% -15% x 57% = -8.6% Linear...
AI summary Table 110 outlines the interactive effects of various BNI lighting measures on energy and peak demand savings. The table shows that some measures, such as LED lamps and occupancy sensors, have negative interactive effects, reducing overall savings when combined with other measures. Outdoor LED fixtures show no interactive effects.
E-12-(i)NSUARB IR-17 Attachment 2_ACEEE’s Entire State Database - Excel
102 passages
plan, and has not adopted specific goals, metrics, or protocols to track or evaluate how any energy, sustainability, or climate action initiatives being taken are affecting local marginalized groups. The State of Alabama has implemented a...
AI summary The State of Alabama has implemented energy efficiency initiatives, including the Building Operator Certification (BOC) program and adoption of ANSI/ASHRAE/IESNA Standard 90.1-2013 for buildings. Executive Order 25 achieved a 52% energy consumption reduction in state agencies from 2005 levels by 2015, saving $16.5 million. However, no policy tracks impacts on marginalized groups.
nergy performance. Participating state agencies exceeded the required 30% reduction with a 52% reduction in energy consumption and savings of over $16.5 million compared to their 2005 baseline usage. All public grant and loan recipients co...
AI summary Alabama achieved a 52% energy reduction in public agencies, mandated benchmarking via ENERGY STAR, and established the Building Operator Certification. The State Finance Department's 2015-435 Act created energy management programs, while Act 2009-650 mandated green fleets with annual fuel efficiency goals.
o develope a prequalified ESCO list. The goal of Performance Contracting Accelerator is to expand the use of performance contracting by federal, state, and local governments, K-12 schools, and others. Last Updated: July 2020 ","The Univers...
AI summary The text discusses initiatives to expand performance contracting through prequalified ESCO lists and highlights Alabama's energy code updates. It notes the University of Alabama's CAVT research on transportation efficiency and details Alabama's residential and commercial building codes based on IECC and ASHRAE standards, with state-specific amendments weakening their effectiveness.
ach: The Alabama Department of Economic and Community Affairs (ADECA) has been actively providing energy codes training for many years. Recent efforts include specific training on the new Alabama Energy and Residential Code targeted toward...
AI summary Alabama provides limited CHP incentives through the SAVES Revolving Loan Program but lacks broader policies. Training on energy codes is ongoing, and no statewide interconnection standards exist. No new CHP systems were installed in 2018, and no policies exist to acquire energy savings or generation from CHP.
state has one research center focused on energy efficiency. ","Financial Incentive information for Alaska is provided by the Database of State Incentives for Renewables and Efficiency (DSIRE Alaska). Last Updated: July 2017 ","We were unab...
AI summary The text references Alaska's energy efficiency policies, including Senate Bill 220 requiring public building retrofits and ASHRAE compliance, DSIRE's role in providing financial incentives, and a statute mandating utility data disclosure for residential buildings. It also notes gaps in equity metrics and workforce development in energy plans.
ances approximately 20% of the market share, the majority of homes in Alaska are built to this standard. In addition, research has found that about 68% of new residential construction adheres to BEES. Last reviewed: September 2020 ","Alask...
AI summary Alaska's Building Energy Efficiency Standards (BEES) are adopted by 20% of the market, with 68% of new residential construction complying. The state lacks a statewide commercial building code, but public facilities must follow AS44.42020 standards. Training programs by the Alaska Housing Finance Corporation support code compliance, though no utility involvement guidelines exist.
ficiency takes place at several institutions in the state. ","Financial Incentive information for Arizona is provided by the Database of State Incentives for Renewables and Efficiency (DSIRE Arizona). Last Updated: July 2017 ","We were una...
AI summary Arizona's energy policies include legislative mandates (House Bill 2324) and executive orders (2005-05, 2008-29) requiring energy efficiency in state buildings and agencies. However, no policies address equity metrics for underserved customers or clean energy workforce development, and benchmarking requirements for public facilities remain unclear.
dition, all state-funded buildings constructed after February 11, 2005 must achieve LEED Silver certification and meet the energy standards of ASHRAE 90.1-2004 as mandated by Executive Order 2005-05. Last Updated: September 2019 "," Baseli...
AI summary Arizona mandates LEED Silver certification and ASHRAE 90.1-2004 standards for state-funded buildings post-2005. Utilities are involved in code compliance, with credit for energy savings. CHP systems are eligible under EERS. The Arizona Corporation Commission initiated interconnection standards for distributed generation, with draft rules pending finalization.
effective on January 1, 2015. Newly constructed or remodeled public buildings must comply with ASHRAE 90.1-2007. Newly constructed or remodeled state-owned buildings must comply with ASHRAE 90.1-2013. Last Reviewed: May 2021 "," Baseline &...
AI summary Arkansas requires new or remodeled public and state-owned buildings to comply with specific ASHRAE standards. The state participates in a US DOE study to assess energy code compliance, with an estimated 88% compliance rate. Arkansas has limited policies to encourage CHP and no new CHP systems were installed in 2018. The state engages in training and outreach programs for energy conservation and has a stakeholder advisory group focused on energy codes.
to a proposal to develop a consistent approach for weatherization programs across all Arkansas utilities, the PSC approved a uniform weatherization program in PSC Docket 13-002-U, Order No. 22 at 11. Act 1102 of 2017 (Ark. Code Ann. Sec. 2...
AI summary Arkansas has approved a uniform weatherization program for utilities, but has not implemented financial assistance programs for low-income customers as authorized by Act 1102 of 2017. Low-income energy efficiency programs are not required to meet cost-effectiveness rules, and AWP funds are coordinated with federal WAP funds to cover installation costs.
ities have many other installations underway and are well on track to reach 100MW goal by 2020. State facility energy, water, and GHG data are publicly displayed on website: www.greenbuildings.ca.gov. The Green Building Action Plan for EO...
AI summary The Green Building Action Plan for EO B-18-12 mandates LEED-EB certification for large state buildings and has led to significant energy and water use reductions. State facilities are benchmarked annually, and policies are being updated in the State Administrative Manual. Guidance for EV charging infrastructure has also been developed.
er Architectural Aluminum, American Society of Home Inspectors (ASHI), Nevada County Contractors Association, Valley Contractors Exchange, International Association of Plumbing and Mechanical Officials (IAPMO), OJ Insulation, newly develop...
AI summary In 2019, the Statewide Codes and Standards Compliance Improvement (CI) Subprogram, implemented by California’s investor-owned utilities and the California Energy Commission (CEC), focused on behavior change across the building and appliance efficiency supply chains. The Subprogram delivered training, outreach, and tools to support compliance with the 2019 Energy Code, reaching over 3,600 students with a high satisfaction rate.
ols and training for the healthcare building practitioners who must now comply with 2019 Energy Code requirements for hospitals and other healthcare facilities. The CI Subprogram worked alongside the Energy Commission in developing a “Turb...
AI summary The CI Subprogram has developed an online interface to help building practitioners comply with the 2019 Energy Code requirements for healthcare facilities. They also provide outreach, training, and support for Certified Energy Analysts. California has implemented policies to encourage CHP, including interconnection standards and incentive programs.
program has helped schools and public buildings save 10-30% of their energy use without retrofits. CLEER has assisted over 80 public buildings in western Colorado to track and manage their energy use. The State of Colorado is in the proces...
AI summary The program has helped schools and public buildings reduce energy use by 10-30% without retrofits. CLEER has supported over 80 public buildings in western Colorado with energy tracking. The State of Colorado is setting energy and water efficiency goals and requiring energy performance contracting studies for state-owned buildings. The High Performance Certification Program (HPCP) mandates high performance certifications for state-funded buildings using specific third-party programs like LEED-NC, Green Globes, and US-CHPS.
Last Reviewed: May 2021 "," Baseline & Updated Compliance Studies: Colorado is undergoing a residential code compliance study now as part of a DOE-funded grant that was awarded to NASEO. The field testing has been completed and we are awai...
AI summary Colorado has conducted multiple studies on residential and commercial energy code compliance, finding high residential compliance but low commercial compliance. Xcel Energy has supported code trainings and plans to study energy efficiency impacts. The Colorado Energy Code Compliance Collaborative plays a key role in promoting compliance.
olorado Energy Code Compliance Collaborative is highly involved in building code compliance. The Collaborative's mission is to facilitate compliance with local energy codes and to coordinate energy code actions and policies throughout the...
AI summary The Colorado Energy Code Compliance Collaborative facilitates compliance with local energy codes and provides training and outreach to stakeholders. The Colorado Energy Office offers free education and technical assistance to local governments on energy code adoption and implementation. Colorado has policies supporting combined heat and power (CHP), but no new CHP systems were installed in 2018.
ojects have been approved with an estimated annual energy consumption savings exceeding 99.1 billion BTUs. Once these projects are complete, the total estimated energy cost reduction is $2.91 million. In December 2016, Connecticut launched...
AI summary Connecticut's Energy Savings Performance Contract Project at the Connecticut Valley Hospital has already delivered significant energy savings and greenhouse gas reductions. Additionally, the state has implemented high performance building standards for state-funded construction projects, requiring energy efficiency improvements beyond current building codes.
e Standard to establish state building construction standards by January 1, 2020, that incorporate a nationally-recognized model for sustainable construction codes of high performance green buildings. Benchmarking: In 2014, DEEP was requir...
AI summary Connecticut has implemented energy benchmarking requirements for state buildings, mandating the use of the Energy Star Portfolio Manager and the EnergyCAP tool to track energy and water consumption. The state has benchmarked 42% of its buildings, with plans to expand the initiative further.
ng efficiency. CCAT assists DEEP with several programs, including an energy-efficient business program, the Zero Emission Vehicle (ZEV) program, the Rural Energy Assurance Program, and several others. The Test Bed Program is administered b...
AI summary The document discusses energy efficiency programs in Connecticut, including the Test Bed Program, which allows for the trial use of energy-efficient technologies in state facilities. It also mentions compliance with the 2015 IECC and the ongoing review of the 2021 IECC for potential adoption in 2022.
will conduct a baseline study. Although these findings have not been reported to date, they will be provided in a separate report. Additionally, NEEP completed a residential energy code compliance study in 2019/2020. Utility Involvement: U...
AI summary The document outlines efforts in Connecticut related to energy code compliance, including a baseline study, utility involvement in strategic planning, and training programs. The Connecticut General Statute (16-245m) requires utilities to submit a three-year Conservation and Management Plan, and the State collaborates with NEEP to implement the 2009 IECC. Stakeholder groups and certification requirements for building code officials are also discussed.
imum spend requirement was $3,854,487 and the DCSEU spend was $4,037,174. The savings target minimum was 23,278 MMBtu (electric and fuel unit equivalents), and the DCSEU achieved 37,868 MMBtu in 2019. The DOEE has sought eligible entities...
AI summary The DCSEU exceeded its energy savings target in 2019, achieving 37,868 MMBtu compared to the minimum of 23,278 MMBtu. The DOEE is seeking entities to research utility burden among low- and moderate-income residents. The Clean and Affordable Energy Act of 2008 and the Clean Energy DC Omnibus Amendment Act of 2018 set benchmarking requirements for buildings over specific square footage thresholds.
iance. The Standard will be recalculated every five years and as smaller buildings are subject to the benchmarking requirements, they will also be required to comply with BEPS on a phased-in timeline. Last Reviewed: July 2019 ","The Distri...
AI summary The District of Columbia has committed to reducing energy use in government buildings by 50% by 2032 through initiatives like the Better Buildings Challenge and Sustainable DC Plan. It has already achieved improvements of up to 25% in electricity consumption through retrofits and plans to implement a strategic energy management plan by 2020.
Last Reviewed: July 2020 ","The Green Building Fund Grant program supports ""greening"" the built environment in the District of Columbia. Grant projects focused on research, data analysis, training, or engagement help the District lead th...
AI summary The Green Building Fund Grant program in the District of Columbia supports initiatives aimed at improving energy efficiency and sustainability. Since 2013, over $2.5 million has been invested in 17 projects, including the Smarter DC Challenge, Power Down DC, and the development of Historic Building Sustainability Guidelines. The District's Clean Energy DC plan outlines 55 actions to reduce greenhouse gas emissions by 50% by 2032, including net-zero energy codes and major retrofit programs.
se knowledge about clean energy and inspire a new generation of environmental stewards and clean energy leaders within the State. Last Updated: July 2021 "," Building type(s) affected: residential §508D-10.5 requires residential property o...
AI summary The text discusses energy efficiency requirements in Hawaii, including disclosure obligations for residential property owners and standards for state-owned buildings. It also highlights a public benchmarking project that identified significant energy savings potential.
er 14, 2021, and the counties must adopt the code no later than December 14, 2022. For the link to the Hawaii Amendments to the 2018 IECC, please see the Hawaii State Building Code Council's website. Last Reviewed: July 2021 "," Baseline &...
AI summary Hawaii has adopted the 2018 IECC with amendments, requiring counties to adopt the code by December 2022. Compliance studies were conducted in 2018, though samples were not statistically representative. Training and outreach have been provided by the Hawaii State Energy Office. CHP is an eligible resource under Hawaii's renewable energy standard, but there are limited policies to encourage its adoption. A new CHP system was installed in 2018.
ocal marginalized groups. The state does not currently include specific measures to prioritize clean energy workforce development. Last Updated: July 2021 ","There is no disclosure policy in place. Last Reviewed: July 2019 ","Idaho statute...
AI summary The text discusses the absence of a disclosure policy in Idaho and the lack of specific measures to prioritize clean energy workforce development. It also outlines Idaho's building code requirements and the use of Energy Star Portfolio Manager for tracking energy use in government buildings, though participation is voluntary. Additionally, it mentions the Performance Contracting Program administered by the Department of Administration.
ercentage of all public buildings. Flagship buildings (James R. Thompson Center, Michael A. Bilandic Building) and some template buildings (e.g. ISP district offices) have done benchmarking thus far. Illinois' Green Buildings Act (20 ILCS...
AI summary Illinois' Green Buildings Act mandates green building certifications for new state-funded construction and renovations. The state also set goals to reduce petroleum use by 20% by 2012, requiring agencies to increase the purchase of hybrid and electric vehicles and reduce fuel consumption through various strategies.
nsure access for underserved customers or if they include specific measures to prioritize clean energy workforce development. Last Updated: September 2020 ","There is no disclosure policy in place. Last Updated: July 2017 ","Executive Orde...
AI summary The text outlines policies related to energy efficiency in state buildings and fleets, including building standards, energy savings contracts, and fleet initiatives. It notes the absence of specific disclosure policies and emphasizes mandatory requirements for energy efficiency in construction and renovation projects.
es ESPCs entered into by state buildings on the main campus. Agencies with their facilities, such as prisons and hospitals, manage their own ESPCs with input from the Office of Management and Budget. Last Reviewed: September 2020 ","The En...
AI summary The text discusses energy efficiency initiatives in Indiana, including compliance with the 2018 IECC and ASHRAE 90.1-2007 standards, the formation of the Energy Efficiency and Reliability Center at Purdue University Calumet, and the use of Energy Savings Performance Contracts (ESPCs) by state agencies. It also highlights the mandatory Indiana Energy Conservation Code and LEED certification requirements for new state buildings.
rgy efficiency in public buildings by accounting for reduced operational costs for energy efficient systems. The guidelines for the analytical procedures that comprise the review were updated in 2018. Iowa continues Phase III of its public...
AI summary Iowa is continuing Phase III of its public building benchmarking database (B3), which provides tools for tracking energy use and identifying efficiency opportunities. The state does not have policies in place for efficient fleet initiatives or performance contracting. The guidelines for energy efficiency reviews were updated in 2018.
commercial buildings, although jurisdictions are free to adopt stricter codes. Commercial buildings must comply with the 2012 IECC, with reference to ASHRAE 90.1 – 2010 with state-specific amendments. Jurisdictions are allowed to adopt a l...
AI summary Iowa requires commercial buildings to comply with the 2012 IECC and ASHRAE 90.1-2010, with state-specific amendments. The state allows locally developed stretch codes that are more stringent but not mandatory. Compliance rates for residential energy codes were 64% and 70% in different climate zones. Iowa has an interconnection standard for CHP but limited policies to encourage its adoption.
ation strategies establish specific policies or equity-related metrics to ensure access for underserved customers or if they include specific measures to prioritize clean energy workforce development. Last Updated: September 2020 "," Build...
AI summary The text discusses energy efficiency requirements in Kansas, including energy audits for state-owned buildings, performance standards for new construction and renovations, and the Facility Conservation Improvement Program (FCIP) aimed at promoting energy efficiency in state buildings and other public facilities.
o 804 has pioneered new technologies and advanced construction techniques. The corporation has completed five LEED Platinum projects to date, including the Sustainable Prototype in Greensburg, Kansas. Established in the 1970s at Wichita St...
AI summary The text discusses energy efficiency initiatives and building codes in Kansas. It highlights LEED Platinum projects, the Center for Energy Studies, and the lack of statewide building codes in Kansas, with local jurisdictions adopting the IECC for residential and commercial construction.
life-cycle cost comparison of at least two types of energy-efficient HVAC equipment, including geothermal equipment when feasible, for every bid for new construction or for existing facility upgrade. The High Performance Buildings Advisory...
AI summary The text outlines requirements for energy-efficient HVAC equipment in new construction and upgrades, the role of the High Performance Buildings Advisory Committee in setting building standards, and the implementation of the Commonwealth Energy Management and Control System (CEMCS) in Kentucky, which tracks energy use in state buildings and has received budget increases for expansion.
RC with state amendments. Last Reviewed: September 2019 ","As of October 1, 2014, projects constructed under the 2013 Kentucky Building Code (KBC) must comply with the 2012 IECC and ASHRAE 90.1-2010. Last Reviewed: September 2019 "," Gap A...
AI summary Kentucky's energy code compliance efforts include a gap analysis, compliance studies, and outreach initiatives, but few policies encourage the deployment of CHP systems, with no new installations in 2018. The state also updated building codes to align with the 2012 IECC and ASHRAE 90.1-2010.
centives not present on DSIRE is listed here. Energy Fund Loan Program: Provides low interest loans for energy efficiency projects at schools and other public facilities. Last Updated: July 2018 "," We were unable to determine if the state...
AI summary The text discusses energy efficiency initiatives, including loan programs for public facilities, legislative requirements for state buildings to exceed energy codes, and fleet efficiency measures. It also notes the absence of specific policies addressing equity or clean energy workforce development.
200 new meters, including new water meters (unaccounted for previously). This $2 million expansion will gather information on 80 new buildings and an additional 7 million square feet of building area. The prior vendor (Enel) has morphed in...
AI summary The expansion of metering systems in state buildings includes 200 new meters, including water meters, and covers 7 million square feet of building area. The system is managed by Hatch Data, which provides real-time energy data, analytics, and integration with building management systems to improve energy efficiency and identify anomalies.
reer pathway in energy efficiency construction and shall include a certification that is broadly recognized, transparent, and portable. The plans are due to the VT General Assembly by October 1, 2021. Last Updated: July 2021 ","Act 89 of 2...
AI summary Vermont is working on establishing energy efficiency construction certification and building energy disclosure tools. Act 89 of 2013 mandates a working group to develop these tools, and the state has made progress with residential disclosure tools. The Public Service Department must report on the effectiveness of voluntary disclosure efforts by 2016, and legislation is pending to make energy disclosure mandatory.
he Climate Cabinet, which works with the Department of Buildings and General Services to ensure that every state building reduces its energy consumption to meet the outlined greenhouse gas reductions. Act 40 of 2011 calls for the state to...
AI summary The document discusses energy efficiency initiatives in Vermont, including Act 40 of 2011 and Act 51 of 2013, which mandate energy savings goals and life cycle cost analysis for state buildings. The Department of Buildings and General Services (BGS) is leading a strategic energy plan and partnering with Efficiency Vermont to benchmark facilities.
onstruction or major renovation project in excess of $250,000.00. Efficiency Vermont has partnered with BGS to benchmark their facilities as part of a new State Energy Management Program initiative. The State shall consider buildings with...
AI summary Efficiency Vermont has partnered with BGS to benchmark facilities under a new State Energy Management Program. The State will prioritize energy-efficient buildings for leases over 5,000 square feet, with provisions for energy efficiency improvements if standards are not met. BGS will also ensure access to energy usage data and may sub-meter in multi-tenant spaces.
nd electric vehicle infrastructure requirements. The state is required by statute to update its codes every three years. Efficiency Vermont provides trainings to builders, town officials, and others. Last reviewed: August 2020 ","The Vermo...
AI summary Vermont updates its residential building energy standards every three years, with the 2020 RBES incorporating more stringent energy efficiency requirements, including improved insulation, window U-values, and EV charging infrastructure for multifamily buildings. The state also implements stretch codes, which are optional for municipalities but mandatory for projects under Residential Act 250.
Last Updated: August 2020 "," Gap Analysis/Strategic Compliance Plan: A gap analysis and energy code compliance plan was completed for Vermont and is available on the Vermont Department of Public Service website. Baseline & Updated Complia...
AI summary A gap analysis and energy code compliance plan for Vermont was completed and made available online. Compliance studies show 66% residential and 90% commercial compliance with energy codes. Efficiency Vermont and Burlington Electric Dept. provide training and support to improve compliance. The Department of Public Service plans to form a stakeholder advisory group, and Efficiency Vermont funds energy code training for various professionals.
ate each building owned or leased by the state at least every five years, as well as an assessment of the costs and benefits of using the LEED standard when constructing or renovating state buildings. Executive Directive 2007-22 requires t...
AI summary The text outlines policies related to energy efficiency in state buildings, including benchmarking requirements and services offered to determine energy savings opportunities. It also notes the absence of specific policies for state fleet efficiency initiatives.
ies. The MEDC has established a matching fund, the MATch (Michigan Accelerating Technologies) Energy Grant, for federal funding opportunities in the energy field from a variety of federal agencies. NextEnergy also runs the I-Corps Energy a...
AI summary The document discusses energy efficiency and clean energy initiatives in Michigan, including the MEDC's matching fund, the I-Corps Energy and Transportation program, the Clean Energy Research Center, and building codes based on the 2015 IECC and ASHRAE 90.1-2013 standards.
iency opportunities when planning or renovating a building owned or operated by the State; reduce energy use 40% by 2040; make all major renovations of buildings and facilities carbon neutral by 2040. Last reviewed: July 2021 "," Baseline...
AI summary The document outlines energy efficiency goals for state-owned buildings, including reducing energy use by 40% by 2040 and achieving carbon neutrality in major renovations by 2040. It also discusses a compliance study and the Michigan Energy Code Compliance Collaborative, which involves stakeholders in improving energy code compliance. The pandemic affected training and outreach efforts in 2020.
Last Updated: July 2021 "," Gap Analysis/Strategic Compliance Plan: Minnesota completed a gap analysis in October 2014 with the Building Code Assistance Project. Baseline & Updated Compliance Studies: Completed in 2018, the Minnesota Cente...
AI summary Minnesota has completed several studies and initiatives related to energy code compliance, including a gap analysis, baseline studies, and training programs. A collaborative effort involving utilities, stakeholders, and organizations is working on a C&S Roadmap to support energy efficiency and utility participation in code-related activities.
Last Reviewed: September 2020 "," Gap Analysis/Strategic Compliance Plan: NA Baseline & Updated Compliance Studies: No formal compliance study has been done. However, in June 2011, BCAP and Southface produced an economic analysis for build...
AI summary The text discusses the lack of formal compliance studies for building energy codes in Mississippi, referencing a 2011 economic analysis by BCAP and Southface. It notes that approximately 60% of the population resides in areas with building codes equivalent to 2003 IBC or higher. A stakeholder group, the Mississippi Building Energy Code Collaborative, has been established to support code implementation, and the MDA provides training on energy codes.
d the Division of Facilities Management, Design and Construction (FMDC) developed and adopted a State Building Energy Efficiency Design Standard (BEEDS), which the state is in the process of updating. As of July 1, 2018, state-owned commer...
AI summary The Division of Facilities Management, Design and Construction (FMDC) developed and adopted a State Building Energy Efficiency Design Standard (BEEDS), which is being updated. As of July 1, 2018, state-owned commercial buildings must comply with the 2018 IECC. A State Energy Program grant supported energy conservation efforts between 2012 and 2016, including benchmarking and energy auditing of state facilities.
ues including resources and efficiency of their use, processing facilities, generation facilities and the entire energy infrastructure needed as well as ensuring the sustainability of our environment. Mid?America Regional Council (MARC) ha...
AI summary The text discusses energy efficiency initiatives in Missouri, including the Regional Energy Efficiency and Conservation Strategy (REECS) Initiative led by Mid?America Regional Council (MARC), and the adoption of energy codes across the state. Missouri, as a home-rule state, has no mandatory statewide codes, but about 50% of its population is covered by the International Energy Conservation Code (IECC) or equivalent codes.
Last Reviewed: July 2021 "," Baseline & Updated Compliance Studies: Missouri completed a compliance study of residential energy codes with the Midwest Energy Efficiency Alliance. PNNL analysis is complete for all but the Manual J measure....
AI summary Missouri conducted a compliance study of residential energy codes with the Midwest Energy Efficiency Alliance, estimating a 64.6% compliance rate. The Division of Energy is developing a compliance plan for submission to DOE. Ameren Missouri committed to funding a building codes circuit rider, and the Division of Energy encourages utility stakeholder advisory groups to engage in building code compliance efforts.
nsure access for underserved customers or if they include specific measures to prioritize clean energy workforce development. Last Updated: September 2020 ","There is no disclosure policy in place. Last Updated: July 2018 ","All new constr...
AI summary The document discusses energy efficiency and building code compliance in Nebraska, including requirements for new construction and remodeling projects, benchmarking of state facilities, and fleet efficiency standards. It notes the absence of a disclosure policy and the use of the 2018 IECC for compliance.
High-Efficacy Lighting count in the 67 homes tested was 68.73%, which exceeds the requirement of the 2009 IECC, but will need improvement to meet the 90% requirement of the newly adopted 2018 IECC. 3. Although most homes in Nebraska are co...
AI summary The evaluation of homes in Nebraska shows that while current insulation and lighting standards exceed the 2009 IECC, improvements are needed to meet the more stringent 2018 IECC requirements. The Nebraska Department of Environment and Energy is collaborating with the DOE Building Energy Codes Program to assess the impact of energy codes on commercial buildings and identify savings opportunities.
Utility Involvement: The state’s three largest publicly-owned electric utilities – Lincoln Electric System, Nebraska Public Power District and Omaha Public Power District – have a long history of providing very strong support (financial an...
AI summary The state's three largest publicly-owned electric utilities have historically supported building energy code upgrades and compliance activities. The Nebraska Energy Code Compliance Collaborative (NECCC) was established in 2013 to promote compliance with energy codes. The State Energy Office is required by statute to provide training for code officials and others involved in implementing energy codes. Training initiatives, including conferences and webinars, have been conducted with support from the utilities and the Midwest Energy Efficiency Alliance.
mendments to the 2015 IECC. The code is mandatory statewide. The NH Building Code Review Board is currently reviewing the 2018 ICC chapters and may propose them, with amendments, for adoption in 2022. Last Reviewed: June 2021 "," Baseline...
AI summary New Hampshire is reviewing updates to the 2015 IECC, with potential adoption of 2018 ICC chapters by 2022. The state's Energy Efficiency Resource Plan funds code trainings through the Systems Benefit Charge, supported by the NH Public Utilities Commission. The NH Building Energy Code Compliance Collaborative continues to promote energy code adoption and compliance. CHP is recognized as an eligible resource but lacks significant policy support.
018 c. 17 “Clean Energy Act”) provides that within five years the NJBPU require benchmarking by owners and operators of commercial buildings over 25,000 sq. ft. using the USEPA Portfolio Manager tool. Last Reviewed: July 2019 ","In January...
AI summary New Jersey has mandated high-performance green building standards for new state buildings over 15,000 square feet, requiring LEED Silver or equivalent certification. The 2019 Energy Master Plan aims to improve energy efficiency in state buildings through audits and retrofitting. The Clean Energy Program provides free benchmarking for various sectors and plans to increase audit caps for hospitals to boost participation and energy savings.
and usage and identify outlying state facilities that need energy efficiency upgrades. The Division of State Energy Services has started to develop a plan forward to tackle these largest energy users. The New Jersey Department of Community...
AI summary The New Jersey Department of Community Affairs and Rutgers Center for Green Buildings have developed resources to promote energy efficiency in buildings and municipalities. State fleets and certain businesses are regulated under the 1992 Energy Policy Act to increase energy efficiency and use alternative fuels.
nt interdisciplinary center for green building excellence in the Northeast, while serving as a single accessible locus for fostering collaboration among green building practitioners and policy-makers. The proposed FY2020 budget also includ...
AI summary The FY2020 budget includes funding for energy efficiency and clean energy initiatives, such as a Research and Development Energy Tech hub, innovation in clean energy, and incentives for smart technology devices. The BPU will also initiate a proceeding on energy storage to address peak demand. The document outlines building code compliance requirements for residential and commercial structures in New Jersey.
ng to adopt a strech code beyond the 2018 IECC. Builders can also use the updated NM Energy Conservation Code Residential Applications Manual to comply when building a passive solar or high mass home. Last reviewed: August 2020 "," Gap Ana...
AI summary New Mexico has implemented energy efficiency and compliance measures, including a gap analysis and strategic compliance plan. The state supports training and outreach for building codes and has an interconnection standard for CHP systems. Policy regulations by the Public Regulation Commission govern CHP projects.
for these studies will be published in 2020. Additional Delphi Panels are planned for 2021 and 2023, and annual longitudinal studies through 2023, to measure progress. Utility Involvement: NYSERDA administers utility rate payer dollars to...
AI summary NYSERDA administers utility ratepayer funds to support building energy code compliance and enforcement in New York State. Training, outreach, and stakeholder engagement initiatives are ongoing, including the publication of manuals and the collection of public input through comment periods and working groups.
for the program. The jurisdictions listed here have adopted their own building codes. They represent approximately 40% of the population of Oklahoma, or 1,507,066 people (based on the 2010 Census). Last Reviewed: September 2020 "," Gap Ana...
AI summary The document discusses Oklahoma's building code compliance, including a gap analysis and strategic compliance plan developed in 2012. It also notes limited policies to encourage combined heat and power (CHP) deployment, with no interconnection standards or state-wide policies for acquiring energy savings or generation from CHP systems. Net metering for CHP systems has been available since 1988 under OCC Order 326195.
nonrenewable energy resources and to serve as models of energy efficiency. University system policy requires that new construction in the higher education system meet at minimum LEED silver standards. A 2017 Executive Order implemented new...
AI summary The text outlines energy efficiency and carbon neutrality initiatives in Oregon, including requirements for new state buildings to meet LEED silver standards, carbon-neutral operations for new buildings, retrofits for existing buildings based on ASHRAE standards, and the development of procurement guidelines and lifecycle analysis tools to promote energy efficiency.
llon vehicle closer to market. Oregon State University’s Nexus of Energy, Water and Agriculture Laboratory studies the physical, operational and geospatial connections in the energy-water-food nexus. Last Reviewed: July 2019 ",7 out of 9,"...
AI summary The document discusses Oregon's building codes, including the residential and commercial codes based on the International Energy Conservation Code (IECC) and ASHRAE 90.1-2019. It highlights updates to the Oregon Residential Specialty Code (ORSC) and compliance efforts by utilities and the state.
Last reviewed: July 2021 "," Baseline & Updated Compliance Studies: Commercial: On October 16, 2019 Northwest Energy Efficiency Alliance (NEEA) completed the Baseline & Updated Compliance Studies (Report #E19-392) for 2019 Oregon New Comme...
AI summary The document discusses compliance studies for Oregon's commercial and residential energy codes, highlighting high compliance rates and minimal deviations from code requirements. It also outlines utility involvement in promoting energy efficiency through training, incentives, and market transformation efforts.
des Division). Finally, Executive Order from 2017 (EO 17-20) established Built Environment Efficiency Working Group (BWEEG) a workgroup that is providing additional input to pertinent stakeholders. Training/Outreach: ODOE operates a codes...
AI summary The Oregon Department of Energy (ODOE) and Building Codes Division (BCD) provide training, outreach, and compliance support for energy codes. BCD offers mandatory training for building officials, while ODOE provides a code hotline and training for builders and other stakeholders. The Oregon Home Builders Association (OHBA) and NEEA also support these efforts, with utility programs assisting in training for beyond-code construction.
019 ","Pennsylvania passed an Executive Order (EO 2019-01) in January 2019, requiring state-owned and occupied facilities to reduce energy consumption by 3% per year, and 21% by 2025 from 2017 levels. PA’s current Building Codes are based...
AI summary Pennsylvania passed Executive Order 2019-01, requiring state-owned facilities to reduce energy consumption by 3% annually and 21% by 2025. The order mandates high-performance building standards for new and renovated buildings and sets a goal of 25% electric vehicles in the state fleet by 2025. A driving tracking system has been implemented to monitor and improve driving efficiency.
treach activities to support the development of indoor environments that are more safe, more thermally, visually, and acoustically comfortable, and that minimize the use of energy and other resources. The Consortium for Building Energy Inn...
AI summary The text discusses energy efficiency initiatives and building code compliance in Pennsylvania, highlighting the Consortium for Building Energy Innovation (CBEI) and its research efforts toward 50% energy reduction in buildings by 2030, supported by state-funded programs such as the Alternative Fuels Incentive Grant (AFIG). It also mentions the adoption of the 2015 IECC and the 2018 International Building Code in Philadelphia.
Last reviewed: July 2020 "," Gap Analysis/Strategic Compliance Plan: The Building Codes Assistance Project completed a gap analysis in 2012. The Pennsylvania Energy Code Collaborative (PECC) met to further define best practices and recomme...
AI summary This text outlines efforts in Pennsylvania to improve energy code compliance, including a gap analysis, strategic compliance plan, baseline studies, utility involvement, stakeholder meetings, and training initiatives. The PECC and other groups are working on long-term actions to support energy efficiency goals.
ce received the first certification for the production of cold water from the gasification of LNG to increase the efficiency of industrial cooling needs. Other two technologies are under evaluation. Last Updated: July 2016 ",2.5 out of 7,"...
AI summary The document discusses the certification of a technology for producing cold water from LNG gasification to improve industrial cooling efficiency, and mentions the 2011 Puerto Rico Building Code requiring compliance with the 2009 IECC for residential and commercial new construction, along with training and outreach programs.
he 2011 Puerto Rico Building Code requires compliance with the 2009 IECC for commercial new construction. Municipalities are permitted to adopt stretch codes if more stringent than the statewide code. Last Updated: August 2017 "," Gap Anal...
AI summary Puerto Rico's building code requires compliance with the 2009 IECC for commercial new construction, with municipalities allowed to adopt stricter codes. The 2011 Puerto Rico Building Code was developed with input from various stakeholders. Puerto Rico has limited policies to encourage CHP, with only four new CHP systems installed in 2017. PREPA has interconnection rules for distributed generation up to 1 MW, but not for CHP.
ER has also begun using web-based centralized utility billing for state agencies for both electricty and natural gas, which has streamlined payment, reporting, and tracking capabilities for the State. The state has several other energy ben...
AI summary Rhode Island has implemented web-based centralized utility billing for state agencies and is engaged in energy benchmarking efforts. These initiatives include the Better Buildings Challenge, energy data inventory, and the use of tools like Portfolio Manager and EnergyCAP to track and manage energy usage across state buildings.
nting energy efficiency in the public sector then addressed these barriers through master price agreements, expanded and enhancing financing and incentive options, and extensive technical assistance. In addition to recent programs, The Gre...
AI summary The text discusses initiatives to promote energy efficiency in the public sector, including the Green Buildings Act, which mandates high-performance green building standards for public agency projects. It also outlines strategies under Executive Order 15-17 to reduce fossil fuel use and greenhouse gas emissions from the State fleet, aiming for 25% zero-emissions vehicles by 2025.
sts ESPCs as one of the main ways it promotes energy efficiency and cites funds used to engage energy service companies to use ESPCs. The state provides a model contract and a list of qualified ESCOs. Last Reviewed: July 2020 ","The Univer...
AI summary Rhode Island promotes energy efficiency through ESPCs, a voluntary stretch code for buildings, and the Energy Fellows Program. The state has adopted the 2015 IECC with amendments and supports a stretch code aiming for 15% more energy efficiency. Compliance with building codes is mandatory statewide.
“15% more energy efficiency than buildings constructed according to the prevailing path.” This effort was pursued in conjunction with the RI Building Code Commission and the RI Builder’s Association. Issued in December, 2015, Executive Ord...
AI summary Rhode Island is working to improve energy efficiency in buildings by developing a voluntary stretch code based on the International Green Construction Code. This effort is coordinated with multiple organizations and was directed by Executive Order 15-17 issued in December 2015.
al or stretch building code based on the International Green Construction Code or equivalent by 2017. Rhode Island currently has a voluntary stretch code for both commercial and residential buildings.
AI summary Rhode Island has implemented a voluntary stretch building code based on the International Green Construction Code or equivalent, applicable to both commercial and residential buildings, with the goal of enforcing it by 2017.
Last Updated: September 2020 "," Gap Analysis/Strategic Compliance Plan: The baseline code compliance studies noted below included a comprehensive survey of all stakeholders in the building and code industry, with an emphasis on code offic...
AI summary The document discusses the development and implementation of the Code Compliance Enhancement Initiative (CCEI) in Rhode Island, including baseline and updated compliance studies conducted by National Grid. It highlights the involvement of utilities in supporting building energy code compliance and the establishment of a multi-year commitment to CCEI through regulatory guidelines and collaboration with various stakeholders.
ode Commission to provide trainings and support aimed at improving code compliance with the energy code in the RI CCEI. National Grid is also actively involved in strategic planning and coordination with the RI Building Code Commission, OE...
AI summary National Grid collaborates with the RI Building Code Commission, OER, and other stakeholders to improve code compliance with the energy code in the RI CCEI. The Code Compliance Enhancement Initiative (CCEI) includes training, outreach, and partnerships aimed at enhancing compliance and engagement from various industry groups.
es, K-12 schools and colleges and universities for over a decade. This data allows individual organizations to compare their energy use with others of a similar type, and adjust behavior accordingly. In June 2008, the state enacted additio...
AI summary The text discusses energy efficiency initiatives in the state, including legislation requiring energy use reductions, benchmarking data collection, and energy audits. It also mentions requirements for new state buildings to meet green building standards and preferences for purchasing alternative fuel vehicles.
ly 2021 "," Building type(s) affected: residential SB 64 established certain energy efficiency disclosure requirements for new residential buildings. This policy is triggered at the time of sale. Last Updated: July 2017 ","In 2008, the Sou...
AI summary SB 64 mandates energy efficiency disclosure for new residential buildings at the time of sale. South Dakota requires high performance building standards for state construction, using LEED-Silver or comparable standards. Energy conservation loans are provided based on energy savings, and building energy use is tracked with Energy Cap. The state promotes flex fuel vehicles but lacks a statewide energy-efficient fleet requirement.
ity energy consumption as well as their associated utility savings. To support this goal, SFUM administers several utility savings and building energy management initiatives, including the following: Development and maintenance of an onlin...
AI summary SFUM administers energy efficiency and building management initiatives, including an online UDM platform for State facilities. The platform tracks utility costs and usage, provides bill payment and benchmarking, and offers insights to end-users. It was implemented for 72 agencies and Higher Education campuses, with access granted to 567 end-users.
03 million square feet of State-owned and managed facilities by primary use type, square footage, postal code, utility provider, commodity, and location. High Performance Building Requirements (HPBr) The Tennessee High Performance Building...
AI summary The Tennessee High Performance Building Requirements (HPBr) set design and construction standards to improve sustainability and energy efficiency for State-owned and managed facilities. These requirements include compliance with ASHRAE 90.1-2010, energy modeling, system commissioning, and the use of ENERGY STAR equipment. They apply to State facilities but not to municipal or county buildings.
d managed facilities, including higher education campuses. However, municipal and county governments have implemented requirements and programs for their own public buildings, including the following: Chattanooga As a U.S. DOE Better Build...
AI summary The text discusses energy performance improvements in municipal buildings in Chattanooga, Knoxville, and Nashville, highlighting initiatives like retro-commissioning, LED upgrades, and participation in demand response programs. Nashville implemented new green building standards through legislation.
uildings owned by Metro Government to meet new green building standards. This included the development of a strategic energy management plan, to include timelines and cost estimates for implementing: An energy retrofit program across at le...
AI summary The document outlines Metro Government's initiatives to retrofit buildings to meet green standards, including energy efficiency targets and LEED certification requirements. It also references Tennessee legislation mandating energy-efficient vehicle purchases.
s currently researching several energy topics supported by funding awards from the National Science Foundation and U.S. DOE, totaling around $3 million. Learn more about the University’s efforts here. Last Reviewed: July 2019 ",3.5 out of...
AI summary Tennessee has adopted the 2018 IRC and 2018 IECC codes with amendments for residential construction, effective July 16, 2020. The Department of Commerce and Insurance conducted a rulemaking hearing to adopt these codes, with some weakening amendments. The rulemaking process involved the State Fire Marshal’s Office and included provisions such as retaining 2009 IRC and IECC requirements and allowing local governments to request less stringent building standards.
the State Fire Marshal’s Office are required to obtain a State building code permit prior to commencing construction. The Department verifies contractors' licensure as part of the permitting process. Last Reviewed: September 2020 ","State...
AI summary The State Fire Marshal’s Office, under the Department of Commerce and Insurance (C&I), is responsible for adopting and enforcing state building codes. The 2012 IECC was adopted for commercial and state-owned buildings in 2016, though some buildings still use the 2006 IECC. Local jurisdictions may adopt more stringent codes voluntarily, but cannot be required to do so.
are required to obtain a State building code permit prior to commencing construction. The Department verifies contractors' licensure as part of the permitting process. Last Reviewed: September 2020
AI summary The text outlines that obtaining a State building code permit is required before construction begins, with the Department verifying contractors' licensure as part of the permitting process. The information was last reviewed in September 2020.
"," Gap Analysis/Strategic Compliance Plan: The Tennessee (TDEC) Office of Energy Programs, the Tennessee Department of Commerce and Insurance, and the Tennessee Fire Service and Codes Enforcement Academy) are currently engaged in a reside...
AI summary The Tennessee Department of Environment and Conservation Office of Energy Programs, along with other state agencies, is conducting a residential energy code compliance baseline field study to identify areas needing additional education and training. The study, funded by the U.S. Department of Energy and led by the Southeast Energy Efficiency Alliance, collects data from single-family homes across two climate zones in Tennessee.
e State may wish to consider conducting additional education, outreach, and/or training. Data was collected from 15 counties spread out across Tennessee, with Davidson County having the highest number of homes tested (27 homes) and Sevier...
AI summary A study conducted in Tennessee in 2018 collected data from 15 counties to assess building energy efficiency. The final report is awaiting approval from the DOE. The State Fire Marshal’s Office collaborates with the Southeastern Energy Efficiency Alliance (SEEA) on building energy codes and provides training to codes inspectors through the Tennessee Fire Service and Codes Enforcement Academy (TFSCEA).
ments. As interest in IECC adoption and enforcement increases, TFSCEA will create more IECC courses throughout the state to move out of “introductory” training and into more “topic-specific” training. TFSCEA and the State Fire Marshal’s Of...
AI summary TFSCEA is enhancing IECC training by introducing more topic-specific courses and distance learning to improve accessibility and training effectiveness. The state also supports CHP projects as a means to enhance energy system resilience, with two new CHP systems operational in Tennessee in 2018.
"," Gap Analysis/Strategic Compliance Plan: The South-Central Partnership for Energy Efficiency as a Resource (SPEER) collaborated with the Texas State Energy Conservation Office (SECO) to conduct a baseline study. The study did not attemp...
AI summary This section outlines Texas's efforts in energy code compliance through the South-Central Partnership for Energy Efficiency as a Resource (SPEER) and the Texas State Energy Conservation Office (SECO). It details baseline studies, compliance studies, utility involvement, stakeholder groups, and training programs aimed at improving residential energy efficiency and code compliance.
e testing, infrared thermography of building components, HVAC installation and repair, and energy efficient lighting technologies. Last Updated: July 2021 ","There is no disclosure policy in place. Last Reviewed: July 2019 ","Passed in 200...
AI summary HB 80, passed in 2006, mandated the creation of a state building energy efficiency program. The program involves benchmarking energy consumption of state buildings using the Building OS platform and comparing it to CBECS data. Currently, 75% of DFCM-managed buildings are being benchmarked, excluding higher education and other public buildings. The City of Salt Lake has its own benchmarking program.
75% of DFCM managed buildings are being bench-marked in Building OS. This does not include higher education or other public buildings. The City of Salt Lake has its own bench-marking program underway. In Spring 2015, the Utah Governor's Of...
AI summary 75% of DFCM-managed buildings are being benchmarked in Building OS, excluding higher education and public buildings. Utah has initiated a statewide benchmarking program through legislation S.B. 217 (2015), requiring annual reporting of energy and water consumption by state agencies. An RFP was issued for metering buildings and developing an online benchmarking platform, with the contract active until 2024.
to meter buildings and develop an online benchmarking platform. The vendor has been selected and the scope of work is being executed and the contract is still active through state contract until 2024. The Division of Facilities, Constructi...
AI summary The Division of Facilities, Construction and Management is implementing a High Performance Building Standard (HPBS) requiring 20% energy cost savings over a code baseline for new state projects. A vendor has been selected to install meters and develop an online benchmarking platform, with the contract active until 2024. Utah’s DFO has exceeded its 2014 target of 50% clean vehicles by replacing 62% of its fleet with vehicles meeting or exceeding stricter 2018 Tier 3 emissions standards.
IMT, and energy code compliance findings from the study will be incorporated into Utah's energy code training program. More info at: https://www.energy.gov/eere/buildings/articles/department-energy-invests-115-million-building-america-indu...
AI summary Utah is enhancing energy code compliance through utility programs, stakeholder groups, and training initiatives. Utilities offer incentives for compliant equipment, and the Uniform Building Code Commission provides recommendations and public input. A three-year training program with utilities has been established to improve code enforcement and builder training.
ed Airshed Grant and are administered by the Bear River Health Department. Last Reviewed: June 2020 ",0 out of 3,"Utah has not set appliance standards beyond those required by the federal government. Last Reviewed: June 2019 ", Maine,16,26...
AI summary Maine offers various financial incentives for energy efficiency, including leading by example with energy requirements for public buildings and fleets. The state has adopted a residential energy use disclosure policy and provides programs like the Advanced Building Program and the Low Income Heat Pump Initiative. PACE is enabled but not currently active.
en New Deal for Maine that requires employers constructing a generation facility larger than 2 MW to employ apprentices. Last Updated: July 2021 "," Building type(s) affected: residential rental H.P. 1468 requires the disclosure of an ener...
AI summary Maine legislation requires energy efficiency standards for state buildings, including the use of green building standards and life-cycle cost analysis. The state also mandates the disclosure of energy efficiency checklists to tenants of residential rental properties. A legislative resolve established a task force to improve energy efficiency and reduce reliance on imported heating oil.
al Energy Conservation Code, which takes effect on July 1, 2021 and also adopted the 2021 IECC to serve as an appendix to the IECC as a statewide “stretch code” that municipalities may elect to adopt. In 2020, state law required the Maine...
AI summary The document discusses the adoption of the 2021 International Energy Conservation Code (IECC) as a stretch code in Maine, along with amendments to building codes enacted in 2019. It highlights efforts to modernize building codes and promote energy efficiency, including the development of a long-term plan to achieve net-zero carbon emissions for new construction by 2035.
Last Reviewed: May 2021 "," Baseline & Updated Compliance Studies: A New Construction Baseline Assessment was performed by Ridgeline Energy Analytics in 2020-21. The study used Home Energy Rating Scores (HERS) and RemRate software to asses...
AI summary A compliance study conducted by Ridgeline Energy Analytics found that 67% of homes in Maine met energy code standards under the 2009 IECC. The study faced limitations due to the pandemic. Maine has statutory requirements for Efficiency Maine's involvement in energy code development, and offers training and outreach for code enforcement and compliance.
and Inspector Association, as well as several regional organizations, seek out training opportunities for their members, and partially support the cost of these opportunities. Efficiency Maine Trust and the Maine Office of State Fire Marsh...
AI summary Efficiency Maine Trust and the Maine Office of State Fire Marshal launched a training initiative for code officials and professionals on Maine's updated building codes. Maine's interconnection standard includes combined heat and power (CHP) within its renewable energy standard, though no new CHP systems were installed in 2018.
y star rating system. Resulting metrics will be disclosed to a prospective buyer, lessee, or lender. Benchmarking will be required to demonstrate compliance with the ANSI/ASHRAE/IES Standard 100-2018. Last Reviewed: July 2019 ","WA Statute...
AI summary Washington State requires public agencies receiving state capital budget funding to meet LEED Silver standards and include building commissioning in the design process. Senate Bill 5854 mandates benchmarking of public facilities using EPA Portfolio Manager. The state has benchmarked a large percentage of its buildings and supports local government benchmarking through the Smart Building Center.
Last reviewed: July 2021 "," Baseline & Updated Compliance Studies: A residential code compliance study was completed by the Northwest Energy Efficiency Alliance (NEEA) in 2013. This report describes the compliance of residential new const...
AI summary A residential and commercial code compliance study was conducted in Washington State, showing high compliance rates with energy codes. The study used two methods, and utilities provided funding to NEEA for code development and implementation, including a new initiative for commercial code enhancement.
e next 3-6 years. This is an innovative approach to the development of the next commercial building efficiency standards. Washington has a mandatory conservation standard that requires the state’s electric utilities to pursue “all cost eff...
AI summary Washington State is developing commercial building efficiency standards through collaboration with other Northwest states. The Energy Independence Act mandates utilities to pursue cost-effective conservation, including supporting new construction and retrofit activities. Training and outreach efforts, including code training and resources, are provided by Washington State and regional partners.
e 2013 West Virginia Legislature passed a bill updating the state’s building energy code to follow the 2009 IECC for residential buildings. The new residential code became effective November 30, 2013. Last Reviewed: September 2020 ","West...
AI summary West Virginia updated its residential building energy code to the 2009 IECC in 2013 and its commercial code to ASHRAE 90.1-2010 in 2019. The state is conducting compliance studies and providing training on energy codes, with stakeholder groups involved in the process.