N-1-aAppendix G - Cost of Service Study - REDACTED (Large File - 14 MB)
16 passages
emand and energy allocation factors in Exhibit 8. The calculation of these factors is simply the class amount divided by the total. The remaining allocation factors are developed throughout as needed. With the demand, energy and customer f...
AI summary The text describes the methodology for allocating costs to customer classes within the rate base. It details specific allocation factors for demand, energy, and customer components. Key assets, including steam, hydro, and LM6000, are allocated based on load factor and 3CP demand contribution. Transmission assets are split by voltage ratio, while distribution costs—specifically substations and pole and wire investments—are allocated based on dedicated use, primary/secondary demand levels, and specific construction estimates.
FUNCTIONALIZATION OF AVERAGE RATE BASE (1) TOTAL (2) (3) (4) (5) (6) DIRECT COMPANY GENERATION TRANSMISSION DISTRIBUTION RETAIL CAPITAL PRODUCTION PLANT ( 1) STEAM $1,052,506 $1,052,506 $0 $0 $0 $0 ( 2) HYDRO 258,158 240,242 0 0 0 17,916 (...
AI summary The document presents a detailed functionalization of the average rate base, categorizing assets into generation, transmission, distribution, and retail components. It provides a breakdown of specific production plants (steam, hydro, wind, gas turbines), transmission infrastructure, and distribution assets such as poles, fixtures, and substations. Additionally, the table accounts for working capital, deferred charges (including financing, taxes, and pensions), and asset retirement obligations (ARO), culminating in a total average rate base of approximately $2,772,240.
CLASSIFICATION OF AVERAGE RATE BASE (1) (2) (3) (4) INITIAL CLASSIFICATION TOTAL COMPANY DEMAND RELATED PLANT ENERGY RELATED PLANT CUSTOMER RELATED PLANT ( 1) TRANSMISSION PLANT> 69kV 215,838 215,838 0 0 ( 2) GENERAL PROPERTY PLANT ( 3) TO...
AI summary The document provides a detailed financial classification of the average rate base, categorized by function (Transmission vs. Distribution) and plant type (Demand Related, Energy Related, and Customer Related). It breaks down costs for various assets including land, easements, substations, poles, lines, and transformers, alongside working capital and deferred charges such as financing, taxes, and pensions. The data serves to identify the underlying capital components supporting different utility functions.
CLASSIFICATION OF AVERAGE RATE BASE (37) TOTAL TRANS. < 138kV 81,639 905 0 (52,732) 52,732 0 28,907 53,637 0 INITIAL R/B CLASSIFICATION FURTHER CLASSIFICATION FULLY CLASSIFIED RATE BASE DEMAND ENERGY CUSTOMER DEMAND ENERGY CUSTOMER DEMAND...
AI summary The document presents a detailed breakdown of the average rate base classification for transmission and distribution assets. It categorizes costs into Demand, Energy, and Customer components, distinguishing between initial classifications and further adjustments to arrive at a fully classified rate base. The data includes specific line items such as cash fuel, materials and supplies, deferred charges (financing, tax, and pension), and total transmission function values.
ALLOCATION OF AVERAGE RATE BASE (1) TOTAL (2) (3) SMALL (4) (5) GENERAL (6) SMALL (7) MEDIUM (8) LARGE (9) EXTRA LI (10) (11) (12) ALLOCATION COMPANY DOMESTIC GENERAL GENERAL LARGE INDUSTRIAL INDUSTRIAL INDUSTRIAL INTERR 2 MUNICIPAL UNMETE...
AI summary The document presents a detailed table outlining the allocation of the average rate base for a utility company. It breaks down costs into transmission plant assets (over 69kV), general property plant, and working capital components such as cash, materials, supplies, and deferred charges (financing, tax, pension, and other). The allocation factors are categorized by customer classes, including Domestic, General, Large, Industrial, Municipal, and Unmetered, as well as specific categories for Interr 2 and Extra Large loads.
ALLOCATION OF AVERAGE DISTRIBUTION RATE BASE (1) TOTAL COMPANY (2) DOMESTIC (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL (7) MEDIUM INDUSTRIAL INDUSTRIAL INDUSTRIAL (8) LARGE (9) EXTRA L1 INTERR 2 (10) MUNICIPAL (11) UNMETERED...
AI summary The document presents a detailed table illustrating the allocation of the average distribution rate base across various customer classes in Nova Scotia. It breaks down costs associated with infrastructure components—such as land, easements, substations, poles, fixtures, and lines—for categories including Domestic, Small General, General, General Large, Small, Medium Industrial, Large, Municipal, and Unmetered customers. The table provides specific dollar amounts and allocation factors (e.g., P-1, P-2, D-1) to demonstrate how distribution costs are distributed among different service types.
ANALYSIS OF AVERAGE DISTRIBUTION SUBSTATION RATE BASE (1) TOTAL PLANT (2) DIST. BULK PWR. (3) DIST. OED. BULK PWR. (4) DIST. GENERAL (5) DIST. OED. GENERAL ( 1) TOT. DIST. SUBSTATIONS $29,362 $26,403 $847 $1,969 $143 ALLOCATION ( 2) DOMEST...
AI summary The document presents a detailed breakdown of the average distribution substation rate base, totaling $29,362. It categorizes these costs across five primary categories: Distribution Bulk Power, Distribution OED. Bulk Power, Distribution General, and Distribution OED. General. The data further allocates these costs to various customer classes, including Domestic, Small General, General, General Large, Small Industrial, Medium Industrial, Industrial Large, Municipal, and Unmetered, while identifying specific allocation factors such as D-2 and Direct.
FOR THE YEAR ENDING DECEMBER 31 , 2007 (IN THOUSANDS OF DOLLARS) (1) TOTAL PLANT (2) PRIMARY DEMAND (3) PRIMARY CUSTOMER (4) SECONDARY DEMAND (5) SECONDARY CUSTOMER ( 1) TOTAL NET POLE COST $134,571 ( 2) PRIMARY ONLY (30%) 40,371 $40,371 $...
AI summary The document presents a financial table detailing the 'Total Net Pole Cost' for the year ending December 31, 2007, totaling $134,571,000. It provides a breakdown of these costs across different categories, including Primary Demand, Primary Customer, Secondary Demand, and Secondary Customer. The data distinguishes between 'Primary Only' costs and '50% Joint' costs for both primary and secondary segments, illustrating the allocation of pole-related expenses.
ALLOCATION OF AVERAGE POLE INVESTMENT (1) TOTAL PLANT (2) PRIMARY DEMAND (3) PRIMARY CUSTOMER (4) SECONDARY DEMAND (5) SECONDARY CUSTOMER ( 1) DOMESTIC $94,253 $36,707 $21 ,238 $15,056 $21 ,251 ( 2) SMALL GENERAL 5,727 2,422 1,155 994 1,15...
AI summary The document presents a table detailing the allocation of average pole investment across different customer classes. It breaks down total plant costs into primary and secondary demand and customer categories, specifically distinguishing between domestic, small general, general, general large, small industrial, medium industrial, industrial large, municipal, and unmetered categories. The table includes specific allocation factors (D-2, C-5, D-1, C-4) to determine how costs are distributed among these segments.
ALLOCATION OF AVERAGE WIRE INVESTMENT (1) TOTAL PLANT (2) PRIMARY DEMAND (3) PRIMARY CUSTOMER (4) SECONDARY DEMAND (5) SECONDARY CUSTOMER ( 1) DOMESTIC $64,379 $25,072 $14,507 $10,284 $14,516 ( 2) SMALL GENERAL 3,912 1,655 789 679 790 ( 3)...
AI summary The document presents a detailed breakdown of the allocation of average wire investment and average meter investment for Nova Scotia Power Inc. for the year ending December 31, 2007. It provides data on total plant costs, primary and secondary demand, and customer categories, including domestic, small general, general, and various industrial classifications. The data includes specific unit meter costs and total costs per category to illustrate the distribution of infrastructure investment across different customer types.
FUNCTIONALIZATION OF OPERATING EXPENSES (1) (2) (3) (4) (5) (6) TOTAL PROD. TRANS. DIST. RETAIL DIRECT EXPENSES EXPENSES EXPENSES EXPENSES EXPENSES EXPENSES POWER PRODUCTION ( 1) FUEL $466,625 $459,956 $0 $0 $0 $6,669 ( 2) PURCHASED POWER...
AI summary The document presents a detailed functionalization of operating expenses (OM&G), categorizing costs across various utility functions including Power Production, Transmission, Distribution, Retail, and Direct expenses. It breaks down specific costs for fuel, purchased power, various generation types (Thermal, Hydro, Wind, LM6000), and corporate groups such as Executive Management, Legal Services, and Regulatory Affairs. The table also accounts for depreciation, interest net, preferred dividends, and corporate taxes.
ALLOCATION OF DEPRECIATION EXPENSES (1) TOTAL COMPANY (2) (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL INDUSTRIAL (7) MEDIUM INDUSTRIAL (8) LARGE INDUSTRIAL (9) EXTRA LI INTERR 2 (10) MUNICIPAL (11) UNMETERED (12) ALLOCATION F...
AI summary The document provides a detailed breakdown of depreciation expenses allocated across various demand classifications, including small general, general, industrial (small, medium, large), extra large interruptible, municipal, unmetered, and other categories. It specifies costs associated with different utility functions: generation (steam, hydro, wind, gas turbine, and general property), transmission (plants under and over 69kV), and distribution. Specific allocation factors and demand classifications are provided for each functional area to determine the cost distribution across customer segments.
FOR THE YEAR ENDING DECEMBER 31, 2007 (1) TOTAL COMPANY (2) DOMESTIC (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL INDUSTRIAL (7) MEDIUM INDUSTRIAL (8) LARGE INDUSTRIAL (9) EXTRA Ll INTERR 2 (10) MUNICIPAL (11) UNMETERED (12) A...
AI summary The document provides a detailed breakdown of energy demand and generation data for the year ending December 31, 2007. It categorizes data across various customer classes, including Domestic, Small General, General, Large Industrial, Small Industrial, Medium Industrial, and Large Industrial. Key metrics include Net Customer Demand (N.C. Demand), 3 Coincident Peak (3 CP) demand, and Megawatt-hours (MW.h) of generation and purchases, along with the percentage of responsibility for each category.
NOVA SCOTIA POWER INC. DEVELOPMENT OF ALLOCATION FACTORS FOR THE YEAR ENDING DECEMBER 31, 2007 (1) TOTAL COMPANY (2) DOMESTIC (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL INDUSTRIAL (7) MEDIUM INDUSTRIAL (8) LARGE INDUSTRIAL (...
AI summary The document presents a detailed data table for Nova Scotia Power Inc. regarding the development of allocation factors for the year ending December 31, 2007. It breaks down costs and demand across various customer classes, including Domestic, Small General, General, Large Industrial, and others. Key metrics include Pole & Wire investment demand and customer costs, substation investment demand, meter investment costs, and general plant demand, along with the corresponding percentage of responsibility for each class.
NOVA SCOTIA POWER INC. DEVELOPMENT OF ALLOCATION FACTORS FOR THE YEAR ENDING DECEMBER 31 , 2007 (1) TOTAL COMPANY (2) DOMESTIC (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL INDUSTRIAL (7) MEDIUM INDUSTRIAL (8) LARGE INDUSTRIAL...
AI summary The document presents a detailed breakdown of Nova Scotia Power Inc.'s allocation factors for the year ending December 31, 2007. It provides a comprehensive table detailing the distribution of the rate base, generation and distribution operating expenses, and transmission operating expenses across various customer classes, including Domestic, Small General, General, General Large, and various Industrial categories. The data highlights the percentage of responsibility for each cost component relative to the total company costs.
FOR THE YEAR ENDING DECEMBER 31 , 2007 (1) (2) ENERGY (3) (4) CLASS NON- (5) SYSTEM (6) SYSTEM (7) DEMAND (8) SYSTEM (9) SYSTEM MWH LINE ENERGY COINCIDENT COINCIDENT COINCIDENT LINE COIN. PEAK COINCIDENT SALES LOSSES REQUIREMENT DMD. (KW)...
AI summary The document presents a detailed data table for the year ending December 31, 2007, detailing electricity sales and system metrics across various customer classes. It includes figures for MWh sales, line losses, energy requirements, coincident demand, and coincident factors. Customer categories range from domestic and small general to large industrial and municipal, providing a comprehensive overview of load patterns and system performance for the reporting period.
N-1-aAppendix H - Proposed Tariffs (Large File - 21 MB)
24 passages
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side ofthe substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a ca...
AI summary The document outlines special conditions for utility service, specifically regarding metering and transformer ownership. It stipulates that metering typically occurs on the low voltage side of the substation; however, if a customer requires primary metering, they must provide a capital contribution to cover the additional costs compared to secondary metering. Furthermore, it establishes that customers requesting non-standard service provisions may be required to own the transformer normally provided by the Company.
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a c...
AI summary The document outlines specific conditions for utility service, focusing on metering and transformer ownership. It specifies that metering is typically on the low voltage side; however, if primary metering is required due to customer needs, the customer must provide a capital contribution for the additional costs. It also notes a 1.75% reduction in metered kWh usage for high-voltage side metering. Additionally, the Company may require customers to own transformers for non-standard service provisions.
SPECIAL CONDITIONS: (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a cap...
AI summary The document outlines special conditions regarding metering locations and associated costs. It specifies that metering is typically located on the low voltage side of a substation. If a customer requires primary metering, they must provide a capital contribution to cover the additional costs over secondary metering. It also establishes specific percentage adjustments (reductions or increases of 1.75%) for meter readings based on whether the substation high voltage side is 69 kV or higher.
SPECIAL CONDITIONS: (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a cap...
AI summary The text outlines special conditions regarding metering locations and associated costs for customers. While metering is typically placed on the low voltage side of the substation, customers requiring primary metering must provide a capital contribution for the additional costs over secondary metering. It also specifies adjustment factors for metered kW.h usage based on substation high voltage levels, requiring a 1.75% reduction if metering is on the high voltage side of a 69 kV substation, and a 1.75% increase if on the low voltage side of a substation below 69 kV.
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side ofthe substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a ca...
AI summary The text outlines special conditions for metering and service provisions. It specifies that metering is typically located on the low voltage side of the substation; however, if a customer requires primary metering, they must provide a capital contribution for the additional costs. It also notes a 1.75% reduction in metered kilowatt-hour usage when metering is on the high voltage side. Furthermore, the Company may require customers to own transformers for non-standard service provisions.
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a c...
AI summary The document outlines special conditions regarding metering and transformer ownership for customers with specific requirements. It specifies that metering is typically located on the low voltage side of the substation; however, if primary metering is required, the customer must provide a capital contribution for the additional costs. It also notes a 1.75% adjustment to metered kilowatt-hour usage for high-voltage side metering. Additionally, the Company may require customers to own transformers for non-standard service provisions.
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any industrial customer having a regular billing demand of250 kV.A (225 kW) and over, and for which no other rates are applicable.
AI summary The text defines the applicability of a specific electricity tariff, stating it is intended for industrial customers with a regular billing demand of 250 kV.A (225 kW) or higher, provided that no other specific rates apply to the customer.
SPECIAL CONDITIONS: - (1) At the option of the Company, supply may be at distribution voltage. Meter readings shall be increased by 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transform...
AI summary The document outlines special conditions for a specific utility tariff, primarily addressing metering and transformer loss adjustments. It specifies that meter readings will be increased by 1.75% for each transformation between the meter and the low voltage side of a bulk power supply transformer to account for losses. It also mandates that customers requiring primary metering must provide a capital contribution for the additional costs. Finally, it establishes eligibility criteria, stating the Company may withdraw the tariff if a customer fails to maintain a regular demand of 2,000 kVA or 1,800 kW.
SPECIAL CONDITIONS: - (1) At the option ofthe Company, supply may be at distribution voltage. Meter readings shall be increased by 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transforme...
AI summary The document outlines special conditions for a specific electricity tariff, primarily focusing on metering and transformer loss adjustments. It specifies that meter readings will be adjusted by 1.75% for each transformation between the meter and the low-voltage side of the bulk power supply transformer. Additionally, it mandates that customers requiring primary metering must make a capital contribution for the extra costs. Finally, it establishes eligibility criteria, stating the Company may withdraw the tariff if a customer fails to maintain a minimum demand of 2,000 kVA or 1,800 kW.
NOVA SCOTIA POWER INCORPORATED LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 - ( 4) The Company reserves the right to have a separate service agreement, if in the opinion of the Company issues not specifically set...
AI summary This section of the Large Industrial Tariff (Rate Code 23) outlines the requirements for high-demand customers (2,000 kV.A or 1,800 kW and over). It establishes the Company's right to enter into separate service agreements for specific issues and mandates that customers must ensure their load does not compromise power supply system integrity. Specific technical factors for assessment include reliability, harmonics, voltage flicker, unbalance, and stability, which will be governed by written operating agreements.
NOVA SCOTIA POWER INCORPORATED LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 - ( 4) The Company reserves the right to have a separate service agreement, if in the opinion of the Company issues not specifically set...
AI summary The text outlines the conditions for Nova Scotia Power Incorporated's Large Industrial Tariff (Rate Code 23) for high-capacity loads (2,000 kV.A or 1,800 kW and over). It specifies that the Company reserves the right to establish separate service agreements for unique issues. Furthermore, it mandates that customers must ensure their load does not compromise power supply system integrity, specifically regarding reliability, harmonics, voltage flicker, unbalance, and stability, as defined in a written operating agreement.
AVAILABILITY: This rider will be available to a minimum regular billing demand of 2 000 k V .A at 90% Power Factor, under the following terms and conditions: - (1) The customer has provided written notice of his desire to take service unde...
AI summary The text outlines the terms and conditions for a specific service rider requiring a minimum regular billing demand of 2,000 kVA at a 90% Power Factor. Key requirements include written notice from the customer to identify firm and interruptible load portions, a mandate for customers to reduce interruptible load within ten minutes of a request, and specific protocols for service restoration. It also specifies penalty charges for non-compliance and notice periods for converting between firm and interruptible service rates.
SPECIAL CONDITIONS: - ( 1) The Company reserves the right to have a separate service agreement if in the opinion of the Company, issues not specifically set out herein must be addressed for the ongoing benefit of the Company and its custom...
AI summary The text outlines special conditions for electricity supply agreements, emphasizing the Company's right to establish separate agreements for specific customer needs. It mandates that customers ensure their load does not compromise power supply system integrity, covering factors such as reliability, harmonics, voltage flicker, and stability. Additionally, it specifies adjustments to meter readings based on the voltage level of the supply point to account for transformer losses.
SPECIAL CONDITIONS: - ( 1) The Company reserves the right to have a separate service agreement if in the opinion of the Company, issues not specifically set out herein must be addressed for the ongoing benefit of the Company and its custom...
AI summary The text outlines special conditions for power supply agreements, granting the Company the right to establish separate agreements for specific customer needs. It mandates that customers must ensure their load does not compromise power supply system integrity, with specific requirements to be defined in a written operating agreement. Key technical factors for assessing system integrity include reliability, harmonic levels, voltage flicker, unbalance, load rate of change, stability, and fault levels. Additionally, it specifies adjustments for transformer losses and transmission voltage metering.
AVAILABILITY: This tariff is applicable to three phase electric power and energy, supplied at the low voltage side of the bulk power transformer, to municipal electric utilities. Meter readings shall be increased by 1.75% for each transfor...
AI summary The text specifies the applicability of a particular tariff for three-phase electric power and energy supplied to municipal electric utilities at the low voltage side of bulk power transformers. It establishes a methodology for adjusting meter readings, specifically requiring a 1.75% increase for each transformation between the meter and the low voltage side of the bulk power supply transformer to account for transformation losses, while requiring reductions for metering at transmission voltage.
AVAILABILITY: This tariff is applicable to three phase electric power and energy, supplied at the low voltage side of the bulk power transformer, to municipal electric utilities. Meter readings shall be increased by 1.75% for each transfor...
AI summary The text specifies the applicability of the tariff to three-phase electric power and energy supplied to municipal electric utilities at the low voltage side of the bulk power transformer. It outlines specific adjustments for meter readings, requiring an increase of 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transformer to account for transformation losses, while requiring a reduction for metering at transmission voltage.
Adjusted Company Energy Requirement = The expected Company energy requirement less the total energy requirement of Exports, the Generation Replacement and Load Following, Mersey System, Industrial Expansion Interruptible and Real Time Pric...
AI summary The text defines the 'Adjusted Company Energy Requirement' as the total expected energy requirement of the Company, excluding specific categories such as Exports, Generation Replacement, Load Following, Mersey System, Industrial Expansion Interruptible, and Real Time Pricing classes. Additionally, it notes that the Export Benefits Credit (EBC) is calculated on an annual basis in advance.
EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF - 4. If the customer ceases taking service under this rate, they may return to this rate after a minimum of twelve (12) months from the effective date that service under this rate was cancelled....
AI summary The document outlines the specific requirements and limitations for the Extra Large Industrial Interruptible Tariff. Key provisions include a 12-month waiting period for customers wishing to return to this rate after cancellation, a minimum service voltage of 138 kV, and a requirement for customers to own their transformation facilities. Additionally, the total aggregate service under this rate is capped at 275 MW, and customers must provide evidence that a significant portion of their anticipated usage is at risk under the Electricity Load Interruptible Rider (ELIIR).
Supply Interruptions: A Supply Interruption is defined as: A request by the Company for the customer to reduce load, when deemed necessary by the Company, in order to avoid shortfalls in electricity supply. APPROVED: NOV A SCOTIA UTILITY A...
AI summary The document provides a formal definition of a 'Supply Interruption' as established by the Nova Scotia Utility and Review Board. It defines the term as a request from the utility company for customers to reduce their electricity load when necessary to prevent shortfalls in the power supply. The definition became effective on January 1, 2006.
Power Factor Constant Power Factor Constant 90-100% 1.0000 65-70% 1.1255 80-90% 1.0230 60-65% 1.1785 75-80% 1.0500 55-60% 1.2455 70-75% 1.0835 50-55% 1.3335 16. Restoration of Service:
AI summary The document provides a reference table for power factor constants used in utility calculations. It lists specific numerical constants corresponding to various power factor ranges, ranging from high efficiency (90-100%) to lower efficiency (50-55%). The text also introduces a section regarding the restoration of service.
17. Conversion of Interruptible Load to Firm: Should any customer under this rate desire to be served under any applicable firm service rate, a five (5) year advance written notice must be given to the company so as to ensure adequate capa...
AI summary This section outlines the procedures and requirements for customers wishing to convert from interruptible load to firm service. Customers must provide five years of advance written notice to ensure capacity availability, though the company may allow earlier conversion. Conversely, customers wishing to revert from firm to interruptible service must remain on the firm rate for at least two years, with the company retaining the right to permit an earlier transition.
Availability - (1) This voluntary tariff is available in its first year to customers who are eligible for ELIIR. Beyond that, subject to the success of the rate, it will be available to all industrial customers who also qualify for NSPI' s...
AI summary The text outlines the availability and conditions for a voluntary tariff. In its first year, it is restricted to customers eligible for ELIIR, with plans to expand to all industrial customers qualifying for the NSPI Large Industrial Rate. It specifies that customer-owned generation must be accounted for in CBL constructions. Additionally, it notes that the 2P-RTP and lP-RTP rates cannot be used concurrently, and customers must commit to a minimum twelve-month service period.
Customer Baseline Load (CBL) The customer's AHLS or a simplified version of the AHLS as permitted under the heading "Standard Practice of Setting a CBL". This is the operational load shape that will be used for the purpose of calculating I...
AI summary The document defines the Customer Baseline Load (CBL) as the operational load shape used to calculate Intermediate Service Load (ISL) and Distribution Service Load (DSL). It specifies that the CBL should be based on the customer's Annual Hourly Load Shape (AHLS) or a simplified version of the AHLS, in accordance with the 'Standard Practice of Setting a CBL' guidelines.
Incremental Export Benefit Credit Customers who take service under this rate will be given an Incremental Export Benefit Credit (IEBC) defined as follows: IEBC = (Lesser of Customer's Monthly DSL or NSPI' s Actual Exports calculated monthl...
AI summary The text defines the calculation for the Incremental Export Benefit Credit (IEBC) for customers under a specific rate. The credit is calculated by multiplying the lesser of the customer's monthly Distribution Service Load (DSL) or Nova Scotia Power International's (NSPI) actual exports by NSPI's average export margin for that month. A cap is established such that the total annual IEBC cannot exceed 15% of NSPI's total actual annual export margin.
N-1-aAppendix F - Load Forecast Report (Large File - 16 MB)
7 passages
1 Losses 3 System losses have averaged 7.0 percent of NSR over the past five years and are expected to 4 remain in the 7 percent range over the 1 0 year forecast period. 5 2
AI summary The document provides historical and forecasted data regarding system losses. System losses have averaged 7.0 percent of the Net System Requirement (NSR) over the past five years. This percentage is projected to remain within the 7 percent range throughout the upcoming 10-year forecast period.
Annual Energy – Industrial Sector The load for this sector is forecast using a combination of econometric modeling and large customer surveys. To avoid the effects of customers migrating between the classes, the Small and Medium Industrial...
AI summary The document outlines the forecasting methodology for industrial sector electricity load. Small and Medium Industrial customer loads are forecasted using an econometric model that correlates consumption with GDP, previous year load, and a dummy variable to account for historical migration to the Interruptible Industrial Rate. Conversely, Large Industrial customers are forecasted based on annual surveys regarding planned production levels and equipment changes over a three-year period.
18 The Net System Requirement for the province has grown at an average of 1.9 percent per year 19 from 2000-2005 and is forecast to average 2.0 percent over the next 10 years. 20 21 Nova Scotia Power Inc. 18 2006 Load Forecast
AI summary The document provides a historical and forward-looking overview of the Net System Requirement (NSR) for Nova Scotia. It notes that the NSR grew at an average annual rate of 1.9 percent between 2000 and 2005 and projects a continued average growth rate of 2.0 percent over the subsequent 10-year period. This data is presented as part of the 2006 Load Forecast provided by Nova Scotia Power Inc.
18 Small Industrial 19 - 20 This class comprises small industrial, farming and processing customers whose regular demand - 21 is less than 250 kV A. This class was made up of 2,212 customers as of December 2005, and had - 22 energy sales r...
AI summary The text defines the 'Small Industrial' customer class, which includes small industrial, farming, and processing customers with a regular demand of less than 250 kV A. As of December 2005, this class consisted of 2,212 customers, accounting for 2.1 percent of Nova Scotia Power Inc.'s total energy sales. Energy requirements for this class are projected to grow at an average annual rate of 2.0 percent throughout the forecast period.
15 Municipal 16 17 This class compnses municipal utilities that purchase wholesale electricity from NSPI and 18 distribute it within their own service territories. The six municipalities are: Antigonish, Berwick, 19 Canso, Lunenburg, Mahon...
AI summary The document defines the 'Municipal' class, which consists of six specific municipalities (Antigonish, Berwick, Canso, Lunenburg, Mahone Bay, and Riverport) that purchase wholesale electricity from Nova Scotia Power Inc. (NSPI) for distribution within their territories. The class includes residential, commercial, and industrial loads, with estimated delivery losses of approximately 6 percent. It notes that the UARB-approved Open Access Transmission Tariff (OATT) will allow these municipalities to source electricity from providers other than NSPI starting in 2006.
1 Unmetered Services 2 - 3 This class comprises street and area lighting, as well as miscellaneous lighting and small loads. - 4 In 2005, unmetered sales represented approximately 0.9 percent of total NSPI sales. Energy - 5 sales in this c...
AI summary This section defines the 'Unmetered Services' class, which includes street and area lighting, miscellaneous lighting, and small loads. Historical data indicates that in 2005, unmetered sales accounted for approximately 0.9 percent of total Nova Scotia Power Inc. (NSPI) sales. The forecast for energy sales within this specific class projects an average annual growth rate of 2.0 percent over the forecast period.
26 System Losses and Unbilled Sales 27 28 This category includes NSPI transmission losses, distribution losses and the year-over-year 29 change in unbilled sales. The annual change in unbilled sales is currently in the order of 14 30 GWh,...
AI summary The text outlines the components of system losses and unbilled sales for Nova Scotia Power Inc. (NSPI). It specifies that transmission losses are forecast at approximately 3.0% of the transmission system energy requirement, while distribution losses are forecast at 6.2% of distribution-level sales. Residential and commercial classes are noted to have higher losses due to lower service voltages. The overall forecast for NSPI losses is an average of 6.9% of the Net System Requirement (NSR). Losses for municipal utilities are excluded from this category and accounted for in their respective municipal rate classes.
N-2-bRIR 76 - NSUARB to NSPI - REDACTED (Large File - 46 MB)
8 passages
- Nova Scotia Power Inc. ("NSPI") is an electricity generation, transmission and distribution company, provid ing service to the vast majority of the province of Nova Scotia. NSPI has $3 bill ion in assets, and 470,000 customers. NSPI is a...
AI summary The text provides a preamble describing the corporate structure and regulatory environment of Emera's electric utilities. Nova Scotia Power Inc. (NSPI) serves Nova Scotia as a cost-of-service utility regulated by the UARB, while Bangor Hydro-Electric Company (BHE) serves eastern Maine under FERC and MPUC oversight. The document highlights that while these utilities provide stable earnings due to their monopoly positions and regulated markets, Emera seeks growth through infrastructure expansion, including a joint venture for a pumped storage hydro-electric facility in Massachusetts.
OVERVIEW NSPI is the primary electricity supplier in Nova Scotia, providing over 95% of electricity generation, transmission and distribution in the province. The company owns 2,293 megawatts ("MW") of generating capacity. Approximately 55...
AI summary Nova Scotia Power Inc. (NSPI) is the primary electricity provider in Nova Scotia, owning over 95% of the province's generation, transmission, and distribution infrastructure. The company's generation portfolio consists of coal, oil, natural gas, hydro, and wind. As a public utility regulated under the Public Utilities Act, NSPI is overseen by the Utility and Rate Advisory Board (UARB). The company operates under a cost of service model where rates are set to cover prudently incurred costs and provide an appropriate return on equity (ROE) to investors.
OVERVIEW Bangor Hydro is the second largest electric utility in Maine. BHE's core business is the transmission and distribution ("T&D") of electricity. Electricity generation is deregulated in Maine, and several suppliers compete to provid...
AI summary Bangor Hydro Electric (BHE) is a Maine-based electric utility primarily engaged in transmission and distribution. The company manages significant 'regulatory' assets (stranded costs) from the late 1990s industry restructuring, which account for 30% of its electric rate. BHE's operations are split between regulatory jurisdictions: distribution and stranded costs are regulated by the Maine Public Utilities Commission (MPUC) under an Alternate Rate Plan (ARP), while transmission is regulated by the Federal Energy Regulatory Commission (FERC).
Bangor Hydro Bangor Hydro's business consists of four primary components wh ich are each governed by their own regulatory structure. The components include distribution, transm ission , standard costs, and supply (metering, billi ng, and s...
AI summary The document outlines the four primary components of Bangor Hydro's business: distribution, transmission, standard costs, and supply. BHE's distribution business operates under an Alternate Rate Plan (ARP) requiring annual rate decreases and performance penalties, with the potential for higher returns on equity. Transmission is regulated by FERC and linked to the Regional Transmission Organization for New England. BHE can recover stranded costs for regulatory assets and power purchases, while metering and billing costs are recoverable as prudently incurred.
capital structure. Rates were last set using 9.55% ROE with a common equity component of 37.5% of total capitalization. NSPI's accounting policies are subject to examination and approval by the UARB. Bangor Hydro's core business is the tra...
AI summary The text outlines the capital structure and accounting policies for Nova Scotia Power Inc. (NSPI) and Bangor Hydro (BHE). It details BHE's dual regulatory environment: transmission is regulated by FERC, while distribution and stranded costs are regulated by the Maine Public Utilities Commission (MPUC). BHE operates under an Alternate Rate Plan (ARP) for distribution, featuring an earnings band of 5% to 17% ROE. Additionally, the MPUC allows a 10% ROE on BHE's stranded assets, requiring periodic proceedings to adjust estimates.
Property, plant and equipment is comprised of the following: 2005 Accumulated Net millions of dollars Cost De prec iatlon Book Value Generation Thermal $ 1,719.1 $ 634.1 $1,085.0 Gas Turbines 31.1 21.5 9.6 Combustion Turbines 76.5 10.5 66....
AI summary The document provides a detailed breakdown of property, plant, and equipment (PPE) for the utility, categorized by asset type including generation (thermal, gas, combustion, hydro, and wind), transmission, and distribution. It presents a comparative financial table for the years 2004 and 2005, listing the original cost, accumulated depreciation, and net book value in millions of dollars for each category.
The change in asset retirement obligations is due to the fol lowing: millions of dollars 2005 2004 Balance, beginning of year $ 68.5 $ 65. 1 Accretion included in depreciation expense 0.9 0.8 Accretion deferred to regulatory asset 2.7 2.6...
AI summary The document details the changes in asset retirement obligations (ARO) between 2004 and 2005, noting an increase in the balance due to accretion included in depreciation and deferred to regulatory assets, partially offset by the disposition of Emera Fuels. It provides a breakdown of estimated undiscounted future obligations for various assets, including steam, hydro, and combustion turbines. Additionally, the Company notes that while some transmission and distribution assets may have AROs, a fair value cannot be estimated due to the indefinite use of those assets.
FIVE-YEAR SUMMARY Year Ended December 31 2005 2004 2003 2002 2001 Electric energy sales (GWh) Residential 4,602.7 4,632.4 4,391.1 4,401.6 3,901.7 Commercial 3,614.1 3,567.4 3,586.1 3,401.8 2,862 .3 Industrial 4,600.3 4, 556.1 4,449 .8 4,2...
AI summary The document provides a five-year historical summary (2001-2005) of electric energy sales, generation sources, customer counts, and infrastructure data. It details a shift in energy sources, noting high reliance on thermal coal while tracking growth in hydro and wind. The data also captures the expansion of the customer base across residential, commercial, and industrial sectors, alongside steady metrics for nameplate capacity, employee counts, and transmission and distribution line lengths.
N-7-aRIRs 8 to 23 - HRM to NSPI - REDACTED
12 passages
Question IR-8: With regard to the response to HRM IR-2: - a. How much direct labour is included in the $2.919M figure provided in the response? - b. Of the labour figure provided in response to part (a) of this question, what portion is as...
AI summary The intervenor is seeking detailed clarification regarding Nova Scotia Power Inc.'s (NSPI) labor costs associated with street light replacement and maintenance. The questions request a breakdown of the $2.919M labor figure, distinguishing between internal and affiliate labor, specifying job titles and prevailing wage rates for various trades (e.g., apprentices, journeymen, welders), and inquiring about the extent of preventative maintenance performed by linesmen versus lower-level tradesmen during downtime.
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: HRM REDACTED Question IR-8: (cont'd) a street light, etc., are these activities charged to street lights or to distribution maintenance? Response IR-8: - a. This level of detail is not availab...
AI summary The document provides a response to an information request regarding the classification and labor costs of street light maintenance. It clarifies that street light maintenance is integrated into Nova Scotia Power Inc.'s (NSPI) one-person Shift Powerline Technician strategy. These crews perform various tasks, including responding to trouble calls and street light maintenance, which are managed through the Work Management System. The response also provides specific job titles and labor rates for various powerline technician roles.
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: HRM REDACTED Response IR-8: ( cont' d) Note: Apprentice Powerline Technicians are only involved in street lighting repair and maintenance for training purposes, or to assist Powerline Technici...
AI summary The text provides a breakdown of labor costs for various powerline technician roles involved in street lighting maintenance. It specifies that Apprentice Powerline Technicians are primarily used for training or assisting with repairs within the four-foot primary zone. Additionally, it clarifies the accounting treatment for ancillary maintenance tasks, noting that tree trimming is charged to the Right of Way account, while righting poles is charged to Overhead Maintenance.
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: HRM REDACTED Question IR-9: With regard to the response to HRM IR-3 dealing with Exhibit 9A of Appendix G, Exhibit 9A in NSPI's compliance filing in NSUARB - NSPI-P882, NSPI's updated street l...
AI summary The Halifax Regional Municipality (HRM) submitted an Information Request to Nova Scotia Power Inc. (NSPI) regarding street lighting data. The inquiry focuses on verifying the data sources for NSPI's updated street lighting analysis, specifically requesting clarification on connected demand figures for the unmetered class in 2007. HRM seeks to reconcile discrepancies between current figures and the 2006 compliance filing, specifically concerning fixtures affected by hours of darkness and the total connected lighting load for photocell actuated fixtures.
Response IR-9: (cont'd) fixtures will result in new unmetered service accounts. Miscellaneous other unmetered services will also experience new account growth expected from new cable power supply units, customer-owned outdoor signs, teleph...
AI summary Nova Scotia Power Inc. (NSPI) provides technical details regarding unmetered service accounts, specifically relating to street lights and other miscellaneous unmetered services like bus shelters and traffic control intersections. The response clarifies that account growth is expected from new installations. It also specifies that the energy and demand figures used in Exhibit 9A are based on a 2007 unmetered class curve, noting that winter system peaks occur in the evening, which influences the calculation of hourly average coincident demand.
DETERMINATION OF STREET AND CROSSWALK LIGHTING CONNECTED LOAD BY UNIT BASED ON DECEMBER 2005 INVENTORY LEVELS Description Rate Code kW.h/Mo. Units Unit Connected Load (kW) Total Load (kW) Incandescent : Incandescent < 300 Watts Incandescen...
AI summary The document provides a detailed inventory and load calculation for street and crosswalk lighting based on December 2005 data for the Halifax Regional Municipality (HRM). It categorizes various lighting types—including Incandescent, Mercury Vapour, and Fluorescent—by specific wattage, listing their respective rate codes, monthly kilowatt-hour (kW.h/Mo.) consumption, unit counts, unit connected loads (kW), and total system loads (kW).
DETERMINATION OF STREET AND CROSSWALK LIGHTING CONNECTED LOAD BY UNIT BASED ON DECEMBER 2005 INVENTORY LEVELS Description Rate ~ kW.h/Mo. Unit Connected Load lkWl Total Load lkWl Low Pressure Sodium : Low Pressure Sodium 90 Watts Low Press...
AI summary The document presents a detailed inventory and technical calculation of connected loads for street and crosswalk lighting units in Nova Scotia. Based on December 2005 inventory levels, it categorizes various lighting types—including Low Pressure Sodium, High Pressure Sodium, and Metallic Arc lamps—by their specific wattage, monthly kilowatt-hour (kW.h/Mo.) consumption, unit connected load, and total load. The data serves as a technical basis for determining the electrical demand associated with municipal lighting infrastructure.
Question IR-10: With respect to the responses to HRM IR-6: - a. In response to HRM IR-6(a)(i), please estimate how many street lighting f'txture changes NSPI is processing in a one-year period. Approximately what percent is occurring withi...
AI summary The Halifax Regional Municipality (HRM) is requesting detailed operational data from Nova Scotia Power Inc. (NSPI) regarding customer service and billing activities. The inquiry seeks specific metrics on street lighting fixture updates, residential customer turnover rates, and the processing times for move-ins and move-outs. Additionally, HRM requests data on credit checks, deposit calculations, and the volume and duration of residential billing inquiries, as well as historical and projected billing data for street lighting fixtures.
indicated below represent the number of streetlight service orders. Some of these orders would be for multiple fixtures. Year Installs Removals Re airs 2005 1,655 1,406 17,170 2006 (YTD October 31) 1,117 1,232 13,817 The percentage of thes...
AI summary The text provides operational data regarding streetlight service orders and residential turnover rates for Nova Scotia Power Inc. (NSPI). It details the number of installations, removals, and repairs for 2005 and 2006 (year-to-date), specifically highlighting the percentage of activity occurring within the Halifax Regional Municipality (HRM). Additionally, it reports a slight decrease in the residential turnover rate from 15.6 percent in 2005 to 13.1 percent by October 2006.
- 1. The fifty percent full time equivalent (FTE) position in Billing Services is required to serve the various municipalities that are conducting light emitting diode traffic control light (LED TCL) conversions throughout Nova Scotia, inc...
AI summary The text justifies the necessity of a fifty percent full-time equivalent (FTE) position within the Billing Services department. This role is specifically required to support multiple municipalities across Nova Scotia, including the Halifax Regional Municipality (HRM), as they undertake conversions of traffic control lights to light-emitting diode (LED TCL) technology.
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: HRM REDACTED Response IR-10: (cont'd) conversion processing involves the tracking and coordination of a wide variety of items, including: - 1. Receiving and recording official request to conve...
AI summary The Halifax Regional Municipality (HRM) provided a response to Nova Scotia Power Inc. (NSPI) regarding the conversion process for intersections. The response outlines a ten-step workflow for converting intersections, including receiving requests, coordinating meter removals, identifying required resources, scheduling work with NSPI dispatch, and verifying the installation of LED Traffic Control Lights (TCLs). HRM noted that 35 intersections were converted in 2006 year-to-date, though specific processing times per transaction were unavailable.
Response IR-13: (cont'd) Centre, these service orders would generally be completed within one business day. Once a service order is created, it is automatically fed to a work management system for scheduling by the appropriate regional pla...
AI summary The document outlines the operational workflow for completing service orders, specifically regarding repair work. It describes a four-step process: the creation of a service order, which is automatically fed into a work management system for regional planning; the scheduling and dispatching of field crews by regional operations planners; the completion of the physical work; and the final closing of the service order. The text indicates that these service orders are generally completed within one business day.
N-7-bRIRs 142 to 143 - SEB to NSPI - REDACTED (Large File - 45 MB)
5 passages
Emera at a Glance - Electricity is our business - Generation, transmission, distribution - Foundation in regulated monopolies - 585,000 customers in Nova Scotia and Maine - Low risk merchant generation - 600 MW at Bear Swamp, Massachusetts...
AI summary The document provides a high-level corporate overview of Emera, highlighting its core business in electricity generation, transmission, and distribution. It notes that Emera operates within regulated monopolies, serving 585,000 customers across Nova Scotia and Maine. The company's portfolio includes low-risk merchant generation at Bear Swamp, Massachusetts, and gas transmission infrastructure. Financial highlights include $1.2 billion in revenues, $4 billion in assets, and $120 million in earnings.
Bangor Hydro Electric - Regulated Transmission & Distribution utility in restructured market - Transmission FERC regulated - Distribution regulated by Maine Public Utilities Commission under Alternative Rate Plan - Significant stranded cos...
AI summary The text provides an overview of Bangor Hydro Electric, a regulated transmission and distribution utility operating in a restructured market. While its transmission assets are FERC regulated, its distribution is governed by the Maine Public Utilities Commission under an Alternative Rate Plan. The utility holds a significant stranded cost rate base and serves 115,000 customers with $580M in assets. Since its acquisition, Emera (EMA) has streamlined its cost structure and improved its regulatory relationship.
Powerful Potential Strategic opportunities for investment: - Low risk generation - Transmission electricity and gas - Renewable generation - Environmental investment in rate base - Regulated transmission and distribution
AI summary The document highlights strategic investment opportunities within the utility sector, focusing on low-risk generation, transmission of electricity and gas, and renewable energy sources. It emphasizes the importance of environmental investments within the rate base and the stability of regulated transmission and distribution infrastructure as key areas for growth and strategic opportunity.
Emera at a Glance - Electricity is our business - Generation, transmission, distribution - Foundation in regulated monopolies - 585,000 customers in Nova Scotia and Maine - Low risk merchant generation - Gas transmission supports generatio...
AI summary This section provides a high-level corporate overview of Emera, highlighting its core business operations in the electricity sector, including generation, transmission, and distribution. It notes that the company operates as a regulated monopoly serving approximately 585,000 customers across Nova Scotia and Maine. The text also outlines key financial metrics, including $1.2 billion in revenues, $4 billion in assets, $120 million in earnings, and $275 million in cash flow.
Bangor Hydro Overview - Regulated Transmission & Distribution utility in restructured market - Transmission FERC regulated - Distribution regulated by Maine Public Utilities Commission under Alternative Rate Plan - Significant stranded cos...
AI summary The document provides an overview of Bangor Hydro, a regulated Transmission & Distribution utility operating within a restructured market. Its transmission assets are regulated by FERC, while its distribution services are regulated by the Maine Public Utilities Commission under an Alternative Rate Plan. The utility holds $580M in assets and serves 115,000 customers. Notably, it possesses a significant stranded cost rate base. Following its acquisition, Emera (EMA) has worked to streamline the utility's cost structure and improve its regulatory relationships.
N-40RIRs Attachment SEB-NSPI - 2a, pt. 1 (Large File - 22 MB)
25 passages
APPLICABILITY Applicable to high load factor industrial power service requiring 3,000 kW or greater and having a demonstrable annual load factor of approximately ninety percent (90%) or greater. Service shall be taken at one (1) voltage an...
AI summary This section outlines the specific applicability criteria for a high load factor industrial power service. It is designated for industrial customers requiring 3,000 kW or greater with an annual load factor of approximately 90% or greater. Requirements include service at a single voltage and delivery point, a prohibition on combining service to multiple premises, and a ban on reselling or sharing service. Additionally, the Company maintains the right to negotiate specific terms for loads exceeding 27,000 kW capacity, subject to Alabama Public Service Commission approval.
CHARACTER OF SERVICE Three-phase service directly from the Company's 44 kV or higher transmission system (transmission) or distribution lines (primary). Three phase service at the secondary voltage of transformation facilities supplied fro...
AI summary The text defines the 'Character of Service' regarding three-phase electricity delivery from the Company's infrastructure. It specifies that service can be provided directly from the transmission system (44 kV or higher) or distribution lines (primary), as well as from transformation facilities at secondary voltages. Additionally, it establishes a capacity limitation, stating the Company is not required to serve loads exceeding 20,000 kVa of capacity, unless supplied from transmission facilities of 115 kV or higher.
SEASONAL CAPACITY Additional capacity, hereinafter referred to as "seasonal capacity," can be supplied on a year-toyear basis during the billing months of October through May provided the Consumer gives a minimum of two months written noti...
AI summary The document defines 'seasonal capacity' as additional capacity provided on a year-to-year basis during the October through May billing months. To obtain this capacity, consumers must provide the Company with at least two months' written notice, subject to the Company's determination of availability. The Company reserves the right to suspend delivery during system emergencies and is not obligated to construct additional facilities to meet seasonal capacity demands.
ADJUSTMENT FOR TRANSFORMATION FACILITIES Monthly charges shall be increased by seventy-six cents (76¢) per kW of billing capacity whenever the Company supplies transformation facilities from its transmission lines. The monthly charges shal...
AI summary The document specifies a monthly charge adjustment for transformation facilities based on the source of the supply. The charges are increased by $0.76 per kW of billing capacity when supplied from transmission lines, and by $1.30 per kW of billing capacity when supplied from distribution lines.
NAME OF OFFICER TITLE ADDRESS i MOIN FLECTRIC COMPANY , - CATION NO. 11 1. Rate Application. request, to all se customer agrees t kilowatts. rvice at a primary volta ige or higher , provided \ 2. Character of Service standard three-phase W...
AI summary The document snippet appears to be a portion of a rate application or service standard description. It outlines the requirements for three-phase service at a primary voltage of 34.5 kV or higher, noting that the Company provides these services subject to specific adjustments under R.1. It also indicates that the Company may specify and require primary service at a higher voltage depending on the specific customer agreement.
AVAILABILITY OF SERVICE Available for electric service to general service customers with normal maximum electrical capacity requirements greater than 1,000 KW who take Standard Service from the Company. Each customer shall contract for a d...
AI summary The text outlines the requirements for 'Availability of Service' for general service customers with electrical capacity requirements exceeding 1,000 KW. Customers must contract for specific on-peak and off-peak capacities that meet their normal maximum requirements, with a minimum contract of 1,000 KW in multiples of 100 KW. The Company is not obligated to supply capacity beyond these contracted amounts. Customers whose metered demands fall below 1,000 KW for at least 10 months in a 12-month period will be moved to a standard general service schedule.
CUSTOMER-OWNED METERS Customers taking service under this schedule have the option of owning their electric service meter. Customer-owned meters shall be consistent with the Company's billing and metering systems and communication protocol...
AI summary This section outlines the regulations and conditions for customers who choose to own their own electric service meters. While customers may own the hardware, the Company retains control over meter location, maintenance, and disconnection rights. Customers are responsible for all costs associated with the meter, including initial installation, updates, and testing. The Company ensures that customer-owned meters remain compatible with its billing and communication protocols, and the customer assumes all liability for any injury or damage caused by their equipment.
TERM Contracts will be required for an initial period of not less than two (2) years and shall remain in effect thereafter until either party shall give the other at least twelve (12) months' written notice of the intention to discontinue...
AI summary The text outlines the contractual requirements for customers seeking service, specifying a minimum initial contract period of two years with a twelve-month notice period for termination. It clarifies that existing customers changing requirements do not need new initial contracts unless additional facilities are involved. Additionally, it describes the options for customers to transition between Standard Schedule L.P.S. and Open Access Distribution Schedule O.A.D.-L.P.S., and the conditions under which qualifying customers may elect to use a qualified Energy Service Provider.
AVAILABILITY OF SERVICE (C) Available for general service to customers. Customers shall contract for a definite amount of electrical capacity in kilowatts, which shall be sufficient to meet maximum requirements, but in no case shall the co...
AI summary The document specifies the requirements for customers seeking general electrical service. It mandates that customers must contract for a definite amount of electrical capacity in kilowatts, ensuring the capacity is sufficient to meet their maximum requirements. Additionally, it establishes a minimum contract capacity threshold of 1,000 KW for such services.
Customers with cogeneration and!or small power production facilities shall take service under Schedule COGEN/SPP or by special agreement with the Company. STATE OF MISSOURI, PUBLIC SERVICE COMMISSION P.S.C. MO. No. 1 Revised Sheet No'3:::1...
AI summary The text specifies the service requirements for customers possessing cogeneration and/or small power production facilities, noting they must utilize Schedule COGEN/SPP or enter into a special agreement with the Company. It also includes a regulatory filing header for the State of Missouri Public Service Commission regarding Aquila Networks (dba Aquila, Inc.) for Large Power Service in the Kansas City area.
SPECIAL RULES The voltage, frequency, and phase of all service under this schedule shall be only as specified by the Company. Service will be furnished under, and this schedule shall be subject to Company Rules and Regulations Service is f...
AI summary This section outlines the special rules governing the delivery of electrical service under a specific schedule. It establishes that the Company maintains sole authority over voltage, frequency, and phase specifications. It mandates that service must comply with Company Rules and Regulations, is intended for the sole use of the customer at the specified premises, and strictly prohibits the resale or submetering of energy.
METERING LOSS ADJUSTMENT Where service is metered at a voltage level other than secondary, an adjustment to both the kilowatt-hour (kWh) and kilowatt (kW) readings will be made as follows: - 1. Service Metered at Primary Voltage Where serv...
AI summary The document outlines the specific rules for the Metering Loss Adjustment, which applies to customers served at secondary voltage. It specifies fixed percentage reductions for metered kilowatt-hour (kWh) and kilowatt (kW) readings based on the voltage level of the service point: 1.5% for primary voltage (12 kV circuit feeder), 2.5% for substation voltage (4 kV or 12 kV), and 3% for transmission voltage (34 kV and above). Customers must bear all costs for meter relocation to qualify for these adjustments, and the adjustment is unavailable for new installations after March 1, 2006.
AVAILABLE: To Customers in the State of Idaho where Company has electric service available.
AI summary The provided text is a brief notice indicating the availability of information or services to customers in the State of Idaho where the Company provides electric service. No specific arguments, financial data, or regulatory positions are discussed in this section.
APPLICABLE: To general service supplied for all power requirements when all such service taken on the premises is supplied through one meter installation for a demand of not less than 2,500 kVA but not greater than 25,000 kV A. The average...
AI summary The text outlines the specific rate schedule and service requirements for large power service. It defines eligibility based on a customer's average demand (between 2,500 kVA and 25,000 kVA) over a twelve-month period. The monthly rate structure includes tiered energy charges based on consumption volume, a demand charge for the first 3,000 kVA with additional charges for excess, and a primary voltage discount for high-voltage service. Customers are also required to maintain their own transformers and enter into a minimum five-year contract.
Availability Available to any customer contracting for a specified capacity of not less than 25 kW. Applicant must be located adjacent to an electric transmission or distribution line of Company that is adequate and suitable for supplying...
AI summary The text outlines the eligibility criteria for a specific service, stating it is available to customers who contract for a minimum capacity of 25 kW. Additionally, the applicant's location must be adjacent to the Company's electric transmission or distribution line, which must be deemed adequate and suitable to provide the requested service.
Character of Service Alternating current having a frequency of sixty Hertz and furnished in accordance with the provisions set forth hereunder.
AI summary The document snippet defines the technical 'Character of Service' for the electricity supply, specifying that the electricity must be provided as alternating current with a frequency of sixty Hertz, in compliance with the established regulatory provisions.
Measurements of Maximum Load and Energy Maximum Load shall be measured by suitable recording instruments provided by Company. The Metered Maximum Load shall be the customer's highest average thirty-minute kW load in the billing period. Whe...
AI summary The text establishes the technical requirements for measuring a customer's Maximum Load and energy usage. It defines Metered Maximum Load as the highest average thirty-minute kW load during a billing period. It also specifies that for locations with multiple meters (at 480 Volts or lower), the Maximum Loads for each meter must be aggregated to determine the total monthly Maximum Load. All measurements are to be conducted using instruments provided by the Company.
Special Terms and Conditions 1. For Customers taking transmission or primary service, Customer shall furnish, own, and maintain, at his own expense, the complete substation structure and equipment, including switches and protective equipme...
AI summary The text outlines the special terms and conditions for customers receiving transmission or primary service. It specifies that customers are responsible for owning and maintaining substation structures, equipment, and transformers at their own expense, while the Company provides and maintains metering equipment. The Company reserves the right to require customers to install protective equipment in cases of negligence or to enter into specific maintenance agreements. Additionally, the Company maintains the option to provide and maintain protective equipment under 'Standard Contract Rider No. 53-Excess Facilities.'
Special Terms and Conditions (Contd.) - 2. All wiring, pole lines, wires, and other electrical equipment and apparatus located beyond point of connection of Customer's service lines with the lines of Company are considered the distribution...
AI summary This section outlines special terms and conditions regarding the distribution of electrical services. It clarifies that equipment beyond the point of connection is the customer's responsibility, except for certain metering equipment. It addresses the company's policy on providing transformations for primary service, noting that excess facilities charges apply for unusual requests. Additionally, it defines metering requirements for single locations and establishes a 'Maintenance Period Provision' allowing customers to receive prorated maximum load charges during scheduled maintenance, subject to a $500.00 fee.
t Percent Line of Share Of Line No. Rate Groups System Peak System Peak No. (A) (B) Rate RS 1,582,005 36.727% 2 Rates CS and FOC 224,244 5.206% 2 3 Rate LLF 628,152 14.583% 3 4 Rate HLF 1,808,566 41 .987% 4 5 Purdue-Supplemental 10.481 0.2...
AI summary The document provides a detailed breakdown of the system peak load distribution across various rate groups for a utility. It lists the specific kilowatt (KW) values and their corresponding percentages of the total system peak, including residential service (RS), commercial and fuel oil customers (CS and FOC), and various industrial and transmission service categories. The data concludes with a total system peak of 4,307.464 units.
AVAILABILITY (North Carolina Only) Available to the individual customer. Service under this Schedule shall be used solely by the contracting Customer in a single enterprise, located entirely on a single, contiguous premises. This Schedule...
AI summary The text outlines the availability and limitations of a specific electric service schedule, noting it is available to individual customers but restricted to a single enterprise on a single, contiguous premises. It explicitly excludes residential customers, auxiliary services, and breakdown services. Furthermore, the power provided cannot be resold, exchanged, or used in parallel with other power sources except under specific company-approved conditions. The company's obligation to supply power is contingent upon securing necessary rights-of-way and permits.
TYPE OF SERVICE The Company will furnish 60 Hertz service through one meter, at one delivery point, at one of the following approximate voltages, where available: Single-phase, 120/240 volts, 120/208 volts, 240/480 volts or other available...
AI summary This section outlines the technical specifications for the electrical service provided by the Company. It specifies that 60 Hertz service is delivered via a single meter at various single-phase and 3-phase voltages depending on availability and customer requirements. It notes that specific high-voltage options may be available if the customer provides suitable space for infrastructure and details requirements for motors exceeding 5 H.P., which must be equipped with starting compensators.
AVAILABILITY (South Carolina Only) A vail able to the individual customer. Service under this Schedule shall be used solely by the contracting Customer in a single enterprise, located entirely on a single, contiguous premise. This Schedule...
AI summary The text outlines the specific availability and usage restrictions for a power supply schedule applicable only to customers in South Carolina. It specifies that the service is for a single enterprise on a single contiguous premise and explicitly excludes residential customers, auxiliary services, and resale or exchange of power. Additionally, it clarifies that the Company's obligation to supply power is contingent upon securing necessary rights-of-way, privileges, franchises, and permits, and the Company is not liable for delays caused by failure to secure these rights.
TYPE OF SERVlCE The Company wj]) furnish 60 Hertz service through one meter, at one delivery point, at one of the following approximate voltages, where available: Single-phase, 120/240 volts, 120/208 volts, 240/480 volts or other available...
AI summary The text outlines the types of 60 Hertz electrical services provided by the Company, specifying various single-phase and 3-phase voltage options available at delivery points. It notes that specific high-voltage 3-phase options may be available depending on contract size and the provision of suitable space for infrastructure like substations or transformer vaults. Additionally, it establishes requirements for motor configurations, stipulating that motors exceeding 5 H.P. must have starting compensators.
2. Definitions: Contract Demand: The Contract Demand is the maximum kilowatt demand which the Company shall be required to supply to the Customer. Interruptible Contract Demand: The Interruptible Contract Demand of not more than 50,000 KW...
AI summary This section provides formal definitions for terms related to an Interruptible Power Service agreement. It defines the various components of Contract Demand, distinguishing between Firm Contract Demand (guaranteed availability) and Interruptible Contract Demand (subject to outages). It also establishes the parameters for Interruption Periods, Penalty Demand for exceeding firm limits during those periods, and the specific weekday peak windows designated as Exposure Periods for calculating monthly credits.
N-40RIRs Attachment SEB-NSPI - 2a, pt. 4 (Large File - 19 MB)
21 passages
LARGE POWER SERVICE RATE SCHEDULE "P" AVAILABLE at a single point of delivery for balanced three-phase power of not less than 10,000 kilovolt-amperes at prevailing line voltages above 100,000 volts, except that loads lower than 10,000 kilo...
AI summary The document defines the eligibility criteria for the Large Power Service Rate Schedule 'P'. This schedule is intended for balanced three-phase power with a minimum capacity of 10,000 kilovolt-amperes at line voltages exceeding 100,000 volts. An exception is noted for loads smaller than 10,000 kilovolt-amperes that were already being served under this schedule as of April 3, 1971, which remain eligible. Service requires the execution of an Electric Service Agreement.
LARGE POWER SERVICE RATE SCHEDULE "P" (Continued) TERM The initial term of Electric Service Agreement for service under this schedule shall be 5 years. Agreement shall remain in force thereafter until twelve months after written notice of...
AI summary This document excerpt outlines the terms and general provisions for the Large Power Service Rate Schedule 'P' for Allegheny Power (Monongahela Power Company). It specifies an initial five-year agreement term, notice requirements for cancellation, and constraints on changing agreement capacity. It also notes that customers are responsible for providing protective equipment and that the schedule primarily applies to customers purchasing their entire electrical requirements from the company.
AVAILABILITY This Schedule is available on a voluntary basis for electric service used by a nonresidential customer with either a Contract Demand that equals or exceeds 1,000 kW or whenever the registered or computed demand equals or excee...
AI summary The text outlines the eligibility criteria for a specific electric service Schedule. It is available voluntarily to nonresidential customers with a Contract Demand or computed demand of 1,000 kW or greater over the preceding 12 months. Conversely, the Schedule is explicitly excluded for breakdown, standby, or supplementary services (unless used with specific riders for at least one year), resale services, short-term or temporary services, and new customers with a Contract Demand exceeding 100,000 kW.
TYPE OF SERVICE The types of service to which this Schedule is applicable are alternating current, 60 hertz, three-phase 3 or 4 wires, at Company's standard voltages of 480 volts or higher or the voltage at which Customer was being served...
AI summary This section defines the specific types of electrical service covered by the Schedule. It specifies alternating current, 60 hertz, three-phase 3 or 4 wire service at standard voltages of 480 volts or higher, or the voltage established as of September 19, 1983. It also clarifies that if a customer requires multiple service types that can be supplied from a three-phase 4 wire type without voltage transformation, only the specific type required by the customer will be provided.
IV. Transformation Discounts: When Customer owns the step-down transformation and all other facilities beyond the transformation which Company would normally own, except Company's metering equipment, the charge per kW of on-peak Billing De...
AI summary The document outlines 'Transformation Discounts' applied to customers who own their own step-down transformation and subsequent facilities. These discounts reduce the charge per kW of on-peak Billing Demand and per kWh for both transmission and distribution services. Specific ownership requirements and voltage thresholds (e.g., 69 kV, 115 kV, or 230 kV for transmission; 12.47 kV or higher for distribution) must be met to qualify. It also specifies conditions regarding metering, additional facilities, and the potential for discount reclassification due to system changes.
3. CONTRACTDEMAND The Contract Demand shall be the maximum kW of demand Customer requires Company to supply for the operation of Customer's facility. When this Rider is used in conjunction with the applicable standby or generation service...
AI summary This section defines the 'Contract Demand' as the maximum kilowatt (kW) capacity a customer requires for facility operations. It specifies that when used with standby or generation service riders, standby service cannot replace curtailable load. Additionally, it establishes that Contract Demand is subject to curtailment down to the Firm Demand level.
AVAILABILITY This Schedule is available on a voluntary basis for electric service used by a nonresidential customer with either a Contract Demand that equals or exceeds 1,000 kW or whenever the registered or computed demand equals or excee...
AI summary This section outlines the eligibility criteria for a specific electric service schedule. The schedule is available voluntarily to nonresidential customers whose contract or computed demand is at least 1,000 kW over the preceding 12 months. It explicitly excludes breakdown, standby, or supplementary services (unless used with specific riders for at least one year), resale services, short-term or temporary services, and new customers with a Contract Demand exceeding 100,000 kW.
TYPE OF SERVICE The types of service to which this Schedule is applicable are alternating current, 60 hertz, three-phase 3 or 4 wires, at Company's standard voltages of 480 volts or higher or the voltage at which Customer was being served...
AI summary This section defines the specific types of electrical service covered under the Schedule. It specifies that the service is alternating current, 60 hertz, three-phase 3 or 4 wires, at standard voltages of 480 volts or higher (or the voltage served as of October 7, 1983). It further clarifies that if a customer requests multiple service types, only the one necessary for their requirements will be supplied from a three-phase 4 wire type without voltage transformation.
IV. Transformation Discounts: When Customer owns the step-down transfonnation and all other facilities beyond the transformation which Company would normally own, except Company's metering equipment, the charge per kW of on-peak Billing De...
AI summary The text outlines the criteria and specific discount rates for customers who own their own step-down transformation facilities and associated infrastructure. It defines 'Transmission Service Transformation Discounts' and 'Distribution Service Transformation Discounts' based on the voltage of the service line (e.g., 69 kV to 230 kV for transmission; 12.47 kV or higher for distribution). It specifies eligibility requirements, such as the exclusion of customer-specific substations, and notes that the Company retains metering options and the right to adjust discounts if system conditions change.
1. FIRMDEMAND The Firm Demand shall be the kW of demand specified in the Service Agreement to which Customer shall reduce his requirement at the time specified by Company. Company at all times will endeavor to make available to Customer th...
AI summary The document defines 'Firm Demand' as the specific kilowatt (kW) capacity of demand specified in a Customer's Service Agreement. It establishes that the Customer is required to reduce their demand requirements at times designated by the Company. Additionally, it outlines the Company's commitment to make the specified Firm Demand available to the Customer at all times.
4. CURTAILABLE PERIOD The Curtailable Period shall be an eight-hour period unless Company specifies a shorter period at the time Customer is notified. Customer shall be given a minimum of 30-minutes notice before RIDER-58E Sheet 1 of3 requ...
AI summary The text defines the 'Curtailable Period' for customers under RIDER-58E, establishing an eight-hour maximum duration per 24-hour period, with a total annual cap of 400 hours. Customers must receive at least 30 minutes' notice before requested curtailments. The Company distinguishes between Capacity Level 1 and Level 2 curtailments based on the availability of reserves and firm energy purchases. The Company's determination of the curtailment level is binding, and it is not liable for missed notifications if reasonable diligence is exercised.
ELECTRIC SERVICE SCHEDULE NO. 9A STATE OF UTAH General Service - High Voltage Energy Time-of-Day Option CLOSED TO NEW SERVICE AVAILABILITY: At any point on the Company's interconnected system where there are facilities of adequate capacity...
AI summary This document outlines the terms for Electric Service Schedule No. 9A in the State of Utah. It specifies a General Service - High Voltage Energy Time-of-Day Option that is currently closed to new customers. The service is provided for alternating current, three-phase electricity at high voltages (46,000V or 69,000V+). It notes that while the Time-of-Day Option is available, customers remain responsible for non-contract demand minimum payment obligations resulting from specific facility investments by the Company.
AVAILABLE: In all territory served by Company in the State of Washington.
AI summary The document provides a brief geographical scope statement indicating that the information or conditions discussed are applicable to all territory served by the Company within the State of Washington.
PRIMARY VOLTAGE METERING AND DELIVERY ADJUSTMENTS: (Continued) The reductions of charges herein shall not operate to reduce the minimum charge. When a new delivery or an increase in capacity for an existing delivery is, at request of Custo...
AI summary The text outlines specific adjustments to primary voltage metering and delivery charges. It specifies that charge reductions cannot lower the minimum charge. Additionally, it establishes a 30¢ per kW load size increase for new deliveries or capacity increases requested by customers when using Company-owned transformers at non-standard distribution voltages. The Company also maintains the right to change line voltages, providing affected customers the option to switch to the new voltage or utilize Company-supplied transformers subject to the specified adjustments.
Applicable To non-residential Customers for all electric service required on the Customer's premises. Service under this Schedule is limited to electric service loads where standard transmission service voltage is 46 kV or greater and load...
AI summary The document outlines the applicability criteria for a specific electric service schedule for non-residential customers. It applies to loads exceeding 999 kW in more than one month of a consecutive 18-month period at standard transmission voltages of 46 kV or greater. The schedule ceases to apply if the load falls below 999 kW for 36 consecutive months or if the delivery voltage drops below 46 kV. It specifies that multiple points of delivery or different voltage classifications require separate metering and billing.
AVAILABILITY This rate is available to any customer dassified In the major industrial group of manufacturing with 20-39 as the first two digits of the Standard Industrial Classification using the Company's standard service for power and li...
AI summary The text defines the eligibility criteria for a specific electricity rate. It is applicable to customers in the manufacturing industrial group (SIC codes 20-39) that utilize the Company's standard power and light service. To qualify, customers must have a contract demand of 1,000 kW or greater. The text explicitly states that this rate is not available for resale services.
CHARACTER OF SERVICE Alternating Current, 60 hertz, three phase, metering at the delivery voltage which shall be standard to the Company's operation.
AI summary The document specifies the technical requirements for the character of service provided by the Company. It mandates that the electricity supplied must be Alternating Current (AC), operating at a frequency of 60 hertz with a three-phase configuration. Additionally, it requires that metering be conducted at the delivery voltage, which is to be standard to the Company's operations.
AVAILABILITY This rate schedule is available to all customers on an annual basis for service for lighting, heating and power or combination of lighting, heating and power where facilities of adequate capacity and suitable phase and voltage...
AI summary The document specifies the availability and requirements for a particular rate schedule. It is available to all customers annually for lighting, heating, and power services, provided the utility has adequate capacity, phase, and voltage. The service must be delivered at a single point of delivery with a single meter and is restricted to customers with billing demands of 10,000 kilowatts or greater.
CT Original Sheet No: R-7.2 Sheet 2 of4 CT Replacing: Sheet No: Name of Company: SOU1HWESTERN ELECTRIC POWER COMPANY Kind of Service: Electric Class of Service: As Applicable Part III. Rate Schedule No. 7 Title: LARGE LIGHTING AND POWER PS...
AI summary The document outlines Rate Schedule No. 7 (Large Lighting and Power) for Southwestern Electric Power Company. It details the billing structure for both May through September and October through April cycles, including fixed monthly charges, per kW charges, and per kWh charges. The schedule specifies the methodology for determining billing demand, contract minimums, capacity charges for highly fluctuating loads, and power factor adjustments. It also defines the conditions under which transmission service is applicable.
Municipal Class Municipal Pumping Municipal Service
AI summary The provided text identifies the 'Municipal Class' category within the regulatory proceeding, specifically highlighting 'Municipal Pumping' and 'Municipal Service' as relevant sub-classes or service types. No specific arguments, data, or analysis are provided in this section.
Lighting Class Municipal Street & Parkway Lighting Public Street & Highway Lighting Private Lighting Area Lighting R-43 _ 03-05-04.doc THIS SPACE FOR PSC USE ONLY CT Original Sheet No: R-43 .3 Sheet3 of3 Replacing: Sheet No: Name of Compan...
AI summary The document fragment identifies the 'Lighting Class' of service, which includes categories such as Municipal Street & Parkway Lighting, Public Street & Highway Lighting, Private Lighting, and Area Lighting. It specifically references Rate Schedule No. 43, titled 'Transition Cost Rider (RIDER TC)', and identifies Southwestern Electric Power Company as the entity associated with this rate schedule.
N-40RIRs Attachment SEB-NSPI - 2a, pt. 2 (Large File - 15 MB)
17 passages
APPLICABILITY Available to all commercial and industrial customers who contract for a specified capacity (Minimum Contract Capacity), commensurate with customer's normal firm load requirements, but in no case less than 5,000 kilowatts of c...
AI summary The text outlines the eligibility criteria for a specific service or program, stating it is available to commercial and industrial customers. To qualify, customers must contract for a Minimum Contract Capacity based on their normal firm load requirements, with a minimum threshold of 5,000 kilowatts. Additionally, the service requires all electricity to be delivered at a single point of delivery designated by the Company through one meter.
METERING ADJUSTMENT The Company may, at its option, meter the customer's electrical usage on the low voltage side of customer's substation transformer, in which case the metered quantities will be increased by a percentage which will be ba...
AI summary The Company describes its policy regarding metering adjustments for customers with substation transformers. It reserves the option to meter electrical usage on the low voltage side of the customer's substation transformer. If this option is exercised, the metered quantities will be adjusted upward by a percentage derived from calculated transformer losses.
GENERAL CONDITIONS EPEC may make intentional interruptions at any time and from time to time, at EPEC's sole discretion, for up to 400 hours in any calendar year. However, EPEC may not interrupt the customer (1) due solely to differences i...
AI summary The text outlines the general conditions for Interruptible Power Service provided by Eastern Power Corporation (EPEC). It specifies that EPEC may perform intentional interruptions for up to 400 hours annually, provided the interruptions are not solely due to marginal cost differences or non-firm off-system sales. Requirements for customer notice are established: at least 4 hours for non-emergency situations and a minimum of 30 minutes for emergencies. It also defines 'emergency conditions' and the calculation for counting interruption hours.
TERRITORY Texas Service Area
AI summary The provided text identifies the specific geographic area relevant to the proceeding, which is defined as the Texas Service Area.
The Fixed Fuel Factors recognize loss adjustments due to different voltage levels of service: Energy Loss Factor Fixed Fuel Factor ($/KWH) Name of Company: THE EMPIRE DISTRICT ELECTRIC COMPANY Kind of Service: Electric Class of Service: Al...
AI summary The text outlines the Fixed Fuel Factors for The Empire District Electric Company, specifically detailing loss adjustments based on different voltage levels of service. It specifies rate adjustments for transformer ownership where the company supplies facilities for lower voltage than the primary line, and provides instructions for metering adjustments when service is metered at secondary voltage. Additionally, it defines minimum monthly billing components and references energy cost recovery mechanisms.
9.1. APPLICABLE SERVICE AREA (AT) In the Distribution Service area allocated by the Arkansas Public Service Commission ("APSC" or the "Commission") to Entergy Arkansas, Inc. ("EAI'' or the "Company"), at any point on Company's existing fac...
AI summary The text defines the applicable service area for the proposed schedule as the Distribution Service area allocated by the Arkansas Public Service Commission to Entergy Arkansas, Inc. It specifies that service can be provided at any point on existing facilities with adequate capacity and voltage. Additionally, it covers customers released to EAI by other utilities with Commission approval and notes that the schedule is subject to the jurisdiction of the Tennessee Regulatory Authority where applicable.
9.2. AVAILABILITY To all electric service required by any Customer with maximum demand of 1,000 kW or greater on the premises, when supplied at one point of delivery and measured through one meter. Applicable to standby or supplementary se...
AI summary This section defines the scope of 'Availability' charges, specifying that they apply to electric service for customers with a maximum demand of 1,000 kW or greater at a single point of delivery measured through one meter. The charges are applicable to standby or supplementary services, and to interruptible services only when provided in conjunction with the relevant Rider. The provision explicitly excludes resale or shared services.
9.3. CHARACTER OF SERVICE Single- or three-phase, 60 cycles and at one standard delivery voltage required by Customer and available at Customer's service location where service is delivered and metered at voltages less than 13,800Y/7,960....
AI summary The document defines the standard character of service for customers, specifying that power is provided as single- or three-phase, 60 cycles, at the standard delivery voltage required by the customer. It establishes that these services are metered at voltages less than 13,800Y/7,960. For service delivered or metered at voltages exceeding this threshold, the text directs customers to Rate Schedule No. 18 for applicable adjustments to the Net Monthly Rate.
9.7. CONTRACT PERIOD (MT) Not less than five years. No term contract will be required for Customer who, through Federal Statute, rule or regulation, is prohibited from entering into Company's standard Agreement for Electric Service and who...
AI summary The document specifies the contract period requirements for electric service in the Maryland Territory (MT). It establishes a minimum contract term of five years for standard customers. However, an exception is made for customers who are prohibited by Federal Statute, rules, or regulations from entering into the Company's standard Agreement for Electric Service, provided they meet the Company's requirements for advancing the costs of connection facilities.
41.1. AVAILABILITY Available upon installation of the appropriate metering and communications equipment to any customer receiving service under the Small General Service, Large General Service, Large Power Service, Large General Service Ti...
AI summary The text outlines the availability and conditions for the Interruptible Power Service Rider. The service is available to customers on specific rate schedules (Small General, Large General, Large Power, and Time-of-Use variants) who agree to use interruptible power and energy from Entergy Arkansas, Inc. during On-Peak Hours. Requirements include the installation of metering and communications equipment, a minimum capacity of 100 kW, and the rider's expiration upon the introduction of retail competition for electric generation.
41.2.1. FIRM CONTRACT DEMAND Firm Contract Demand is the demand (kW) that the Customer intends to exclude from interruptions. The Firm Contract Demand shall be specified in the Customer's Agreement for Interruptible Service. The Customer m...
AI summary The document defines 'Firm Contract Demand' as the specific amount of power (kW) that a customer intends to keep available and exclude from interruptions. This demand must be explicitly stated in the customer's Agreement for Interruptible Service. Additionally, it outlines a provision allowing customers to modify their Firm Contract Demand once during the contract period, provided they submit a written notice to the company at least 60 days in advance.
- 41.4.3. Curtailments imposed in accordance with Policy Schedule No. 10 and service interruptions due to damage or failure of transmission or distribution equipment shall not be considered interruption periods for the purpose of this Ride...
AI summary The document excerpt defines the scope of the Optional Interruptible Service (OIS) Rider for Entergy Arkansas, Inc. Specifically, it clarifies that service interruptions caused by equipment failure or damage to transmission/distribution infrastructure, as well as curtailments mandated under Policy Schedule No. 10, are excluded from being classified as interruption periods for the purposes of this Rider.
18.1. AVAILABILITY Available at the option of the Company to a customer receiving electric service under any approved Small General Service, Large General Service, or Large Power Service Rate Schedules where such service is delivered and/o...
AI summary The text defines the availability of a specific service or option provided by the Company. It is available to customers on approved Small General Service, Large General Service, or Large Power Service Rate Schedules, specifically for services delivered and/or metered at voltages of 13,800Y/7,960 or greater. The text explicitly notes that this provision does not apply to the minimum provision of any Rate Schedule.
(AD Function: Generation Transmission Distribution Customer Total Billing Item Service Reduce Monthly Demand Charge per kW by: $0.00 $0.00 $0.77 $0.00 $0.77 Reduce Daily Demand Charge per kW, if applicable, by: $0.0000 $0.0000 $0.0253 $0.0...
AI summary This document excerpt details specific tariff billing items related to demand reduction. It specifies a charge of $0.77 per kW for reducing monthly demand and $0.0253 per kW for reducing daily demand, specifically applied to the distribution function. It also defines the service voltage range for customers who own and maintain their own transformation facilities, covering voltages from 13,800Y/7,960 Volts up to 115,000 Volts.
(AT, MT) Function: Generation Transmission Distribution Customer Total Billing Item Service Reduce Demand and Energy by 1.0% for losses; and, Reduce Monthly I Demand $0.00 $0.00 $1.63 $0.00 $1.63 Charge per kW by: Reduce Daily Den nand Cha...
AI summary The document provides a breakdown of billing items related to demand reduction and energy loss reduction for different utility functions, including Generation, Transmission, Distribution, and Customer service. It specifically outlines charges per kW for reducing monthly and daily demand, highlighting a distribution-specific charge of $1.63 for monthly demand reduction and $0.0536 for daily demand reduction. It also specifies service conditions for delivery and metering at 115,000 Volts or greater.
TYPE OF SERVICE: Single or three phase, 60 hertz, at a standard voltage.
AI summary The document specifies the technical parameters for the type of electrical service provided, indicating that it is available in single or three-phase configurations at a standard voltage and 60 hertz frequency.
AVAILABILITY: Available to all customers in Georgia Power Company's service area as it existed on June 30, 2006.
AI summary The text specifies the availability of a particular service or provision, noting that it is accessible to all customers within the Georgia Power Company's service area as of June 30, 2006.
N-40RIRs Attachment SEB-NSPI - 2a, pt. 5 (Large File - 20 MB)
15 passages
AVAILABILITY This schedule is available to all customers on an annual basis for transmission service where facilities of adequate capacity and suitable phase and voltage are available. Service will be supplied at one point of delivery thro...
AI summary The text defines the availability and requirements for a specific transmission service schedule. It states that the service is available to customers annually, provided there is adequate capacity and suitable phase and voltage. The service is restricted to single points of delivery with one meter and is only applicable to billing demands of 10,000 kilowatts or greater, with metering adjusted to the service voltage.
Should the Customer operate equipment with highly fluctuating, intermittent, or abnormal characteristics that make it necessary for the Company to install special facilities to serve the Customer or to prevent disturbances to the service o...
AI summary The text outlines a specific tariff provision regarding customers who operate equipment with highly fluctuating, intermittent, or abnormal characteristics. If such equipment necessitates the installation of special facilities by the Company to maintain service quality for the customer or others, the Customer will be subject to an additional monthly charge of $1.00 per KVA or fraction thereof of the transformer capacity installed.
T I \ Applicable to Primary Service supplied from the Substation bus.
AI summary The provided text is a single character 'T' and a heading/footnote indicating that certain terms are applicable to Primary Service supplied from the Substation bus. It contains no substantive information or arguments.
Southwestern PUBLIC SERVICE Company COMMISSION SCHEDULE SHEET RATE SCHEDULE #- With Finn RATE SCHEDULE # - Without Finn PUCTIV-147 Distribution No Notice 714.715.716 Distribution No Notice 684.685,686 Distribution Noticed 717,718.719 Distr...
AI summary The document presents a comparison of rate schedules for Southwestern Public Service Company, specifically contrasting rates with and without 'Finn'. It lists various distribution, transmission, and backbone service categories, including Fuel Factors #3, #5, #7, and #9. Additionally, it notes the cancellation of the Experimental Industrial Interruptible Rate Rider, which was previously available to customers with specific interruptible demand and telemetering capabilities.
MONTHLY RATE: Service Voltage Customer Charge: \ Distribution 115 kV and above If taken in addition to fim1 service $50 $50 $50 If not taken in add tion to finn service $200 $639 $639 Demand Charge (per kW of Interruptible Demand): Instant...
AI summary The document outlines the monthly rate structure for distribution services, specifying customer charges, demand charges for Interruptible Power Service (IPS), and energy charges based on service voltage. It distinguishes between charges for customers who take the service in addition to fim1 service versus those who do not. The rates are categorized by instantaneous and two-hour notice periods for demand charges and are effective as of August 1, 1999.
\ The primary service discount that is applicable to tl1e tariff to which iliis Rider is appended is also applicable to ilie disnibution level service DEFINITIONS: Instantaneous interruptible service is service that can be interrupted with...
AI summary The text defines the parameters for 'Instantaneous' and 'Noticed' interruptible services, specifying the technical triggers and notice periods for service interruptions. It outlines the methodology for determining and billing firm versus interruptible demand, including specific rules for large general service tariffs. Key provisions include the establishment of minimum demand charges (e.g., 7,500 kW), prorating of charges when demand falls below thresholds, and exclusions for demand recorded during the 12-hour restoration period following an interruption.
units, transmission equipment or other critical facilities; short or long-term shortages of fuel or generation, transmission, and other facilities; and requirement or orders of governmental agencies. CONDITIONS OF SERVICE: Customer desirin...
AI summary The text outlines the limitations and conditions of service for interruptible power service. It specifies that interruptions may occur due to fuel shortages, generation/transmission issues, or government orders. Customers requesting instantaneous interruptible service are responsible for installing, owning, and maintaining monitoring and interruption-control equipment on their side of the point of delivery. The Company retains exclusive control over the operation of this equipment and reserves the right to inspect and test the facilities.
Southwestern Public Service Company Purchased Power Cost Recovery Factor (PCRF) Texas Retail Jurisdiction Current Month 2006 ($/kWh) Factor Class January February March April May June July August September October November December 8 & 18...
AI summary The document provides a monthly breakdown of the Purchased Power Cost Recovery Factor (PCRF) for the Southwestern Public Service Company's Texas retail jurisdiction for the year 2006. It lists specific dollar amounts per kilowatt-hour ($/kWh) across various service classes, including Transmission, Distribution, and specific industrial and municipal categories such as Cotton Gins, Grain Elevators, Oil Well Pumping, Street Lights, Area Lights, Schools, and Municipals.
Pricing Rate schedule firm demand and energy charges are applicable for FPJ demand and energy: including the ratcheted billing demand provisions of the rate schedule . A monthly credit of $3.40 per kW of FPI demand is given. The credit for...
AI summary The text outlines the pricing structure and contractual terms for Flat Price Interruptible (FPI) demand and energy. Key components include a monthly credit of $3.40 per kW of FPI demand, which is subject to annual review and specific notice requirements for adjustments. It details 'Credit Reduction Charges' for non-compliance with suspension obligations, administrative fees, and the exclusion of Growth Credits. Additionally, it specifies technical requirements, such as five-minute interval metering and telephone access for the Transmission Valley Authority (TVA) to verify compliance.
I. APPLICABILITY Except as modified herein, this schedule is applicable only to a non-residential transmission or primary voltage Customer (as defined in Paragraph XI.) who elects to receive Electricity Supply Service and Electric Delivery...
AI summary This section defines the applicability criteria for a specific electricity schedule. It applies to non-residential transmission or primary voltage customers who receive Electricity Supply and Electric Delivery services and have a peak measured demand of at least 500 kW during at least three billing months within the current and previous 11 billing months. It also outlines the conditions for remaining on the schedule if demand drops below 500 kW and the process for orderly transfer to other schedules once requirements are no longer met.
IV. DETERMINATION OF DISTRIBUTION DEMAND - A. Distribution Demand shall be billed only where the normal service delivery voltage is less than 69 kV. - B. The Distribution Demand billed under Paragraph JI.A.2. shall be such as may be contra...
AI summary The text defines the criteria for billing Distribution Demand in the context of utility service. It specifies that Distribution Demand applies only to service delivery voltages below 69 kV. The billed demand must be the contracted amount or, at minimum, the highest of two values: the highest average kW measured during any 30-minute interval over the current and previous billing months, or 500kW. Additionally, it establishes a minimum demand of 85 percent of the maximum kVA demand for customers with a power factor below 85 percent.
X. STANDBY, MAINTENANCE OR PARALLEL OPERATION SERVICE A Customer requiring standby, maintenance or parallel operation service may elect service under this schedule provided the Customer contracts for the maximum kW which the Company is to...
AI summary This section outlines the requirements and billing conditions for customers seeking standby, maintenance, or parallel operation services. To qualify, customers must contract for the maximum kW the Company can supply. Key provisions include the customer's responsibility to install and maintain suitable protective apparatus at their own expense, subject to Company inspection. Additionally, it establishes that if distribution demand exceeds the contracted demand, the contract demand will be increased accordingly, while billing remains based on the contract demand.
XI. DEFINITION OF TRANSMISSION, PRIMARY AND SECONDARY VOLTAGE CUSTOMER - A. A transmission voltage Customer is any Customer whose delivery voltage is 69 kV or above. - B. A primary voltage Customer is any Customer (a) served from a circuit...
AI summary This section provides the formal definitions used to categorize customers based on their delivery voltage and connection characteristics. Customers are classified into three categories: transmission voltage (69 kV or above), primary voltage (customers served from 69 kV circuits with 4,000 volts or more delivery, specific circuits without company-owned transformation, certain legacy connections prior to 1992, or where company-owned transformation became necessary due to circuit voltage changes), and secondary voltage (all other customers).
General Service Large (Non-Residential; Customer-owned Transformation) Exceeding 750 V but NOT exceeding 30 kV
AI summary The document identifies the 'General Service Large' rate category, which applies to non-residential customers with customer-owned transformation. This category is specifically defined for electrical systems exceeding 750 V but not exceeding 30 kV.
ld SaskPower home > your business > business rates > customer owned tranformation
AI summary The document provides a navigation link for business customers of SaskPower to access information regarding customer-owned transformation. This pertains to the infrastructure and rate implications for businesses that own their own electrical transformation equipment.
N-40RIRs Attachment SEB-NSPI - 2a, pt. 3 (Large File - 23 MB)
24 passages
Availability of Service. Available for general service customers with normal annual load factors greater than 55 percent. The customer shall contract for a sufficient capacity to meet normal maximum requirements, but in no case shall the c...
AI summary The text specifies the eligibility criteria for general service customers regarding the availability of service. To qualify, customers must maintain normal annual load factors exceeding 55 percent. Additionally, customers are required to contract for sufficient capacity to meet their normal maximum requirements, with a minimum contractual capacity threshold of 1,000 kVA.
Special Terms and Conditions. This tariff is subject to the Company's Terms and Conditions of Service. A customer's plant is considered as one or more buildings which are served by a single electrical distribution system provided and opera...
AI summary This section outlines the special terms and conditions for a specific electrical service tariff. It defines a 'customer's plant' as one or more buildings served by a single distribution system. It specifies that the Company reserves the right to connect circuits to different points on a customer's system if load size necessitates multi-circuit delivery. Additionally, it establishes requirements for customers seeking standby or backup service, requiring a contract for a maximum demand of at least 1,000 kVA.
TARIFF I.P. (Industrial Power) (Cont'd from Sheet No. 13.2) The Company shall not be obligated to supply demands in excess of that contracted for. Where service is supplied under the provisions of this paragraph, the billing demand each mo...
AI summary The text specifies the terms for Industrial Power (IP) service, stating that the Company is not required to supply demand exceeding contracted amounts. For instances where service is provided beyond the contract, billing is based on the highest demand recorded across the current and previous two billing periods, subject to established minimum charges. Additionally, it notes that customers with cogeneration or small power production facilities may utilize specific alternative tariffs or enter into special agreements.
Availability of Service. Available for interruptible service to customers operating at 34,500 volts or higher if the Company has surplus capacity in operative generating equipment, transmission lines, and principal substation transformers...
AI summary The document outlines the conditions under which interruptible service is available to customers operating at 34,500 volts or higher. Service is contingent upon the Company having surplus capacity in its generating equipment, transmission lines, and principal substation transformers that exceeds the requirements of other customers. Customers must contract for sufficient capacity to meet normal maximum requirements, with a minimum contractual capacity of 10,000 kVA.
Conditions of Service. - 1. The Company reserves the right to curtail service to the customer at any time and for such period of time that in the Company's sole judgement the operation of its system requires curtailment of customer's servi...
AI summary The text outlines the Conditions of Service for interruptible power supply, specifying the Company's rights to curtail service for system operations. It establishes minimum availability requirements for contract capacity (145 hours weekly and 630 hours monthly), except during emergencies. Customers are required to respond to curtailment requests within ten minutes and are responsible for maintaining substations. It also details options for auxiliary switching and billing for non-interruptible service.
Terms of Contract. The Company reserves the right to limit the total contract capacity for all customers served under this tariff to 100,000 kVA. (Cont'd on Sheet No. 14.3) ISSUED BY COULTER R. BOYLE, III VICE PRESIDENT FORT WAYNE, INDIANA...
AI summary The document outlines the terms of contract for a specific electric service tariff, noting that the Company reserves the right to limit the total contract capacity to 100,000 kVA for all customers served under this tariff. The document was issued by Coulter R. Boyle, III of Atlantic Power under the authority of the Indiana Utility Regulatory Commission and became effective on December 23, 1997.
TARIFF I.R.P. (Interruptible Power) (Cont'd from Sheet No. 14.2) The customer shall contract for capacity sufficient to meet normal maximum interruptible power requirements, but in no event will the amount contracted for be less than 10,00...
AI summary The document outlines the contractual terms for the Interruptible Power (I.R.P.) tariff. Customers must contract for capacity between 10,000 kVA and 50,000 kVA to meet normal maximum requirements. If demand exceeds the contracted capacity, the Company may notify the customer to reduce demand or interrupt service. Initial contracts must last at least two years, with a one-year notice period for termination. The Company reserves the right to require longer initial contract periods if new facilities are necessary.
Special Terms and Conditions. ISSUED BY JOHN R. SAMPSON VICE PRESIDENT FORT WAYNE, INDIANA This tariff is subject to the Company's Terms and Conditions of Service. A customer's plant is considered as one or more buildings which are served...
AI summary The document outlines the special terms and conditions for industrial and power customers. It defines a customer's plant as one or more buildings served by a single electrical distribution system. It grants the Company the authority to connect circuits to different points on a customer's system if the load size requires delivery over multiple circuits. Additionally, it specifies that customers with cogeneration or small power production facilities must use the COGEN/SPP Tariff or enter into a special agreement with the Company.
TERMS AND CONDITIONS OF SERVICE (Cont'd from Sheet No. 3.17) - (a) the average cost of fossil and nuclear fuel consumed in the Company's own plants, such cost being only those items listed in Account 151 and Account 518 (exclusive of spent...
AI summary The text outlines specific terms and conditions of service regarding the calculation of fuel costs and energy sales for an electric utility. It defines the components of fossil and nuclear fuel costs, including internal generation, purchases, intersystem sales, and spent nuclear fuel disposal costs. It also provides a formula for estimating kilowatt-hour sales based on net generation, purchases, interchange, sales, and energy losses.
ISSUED UNDER AUTHORITY OF THE INDIANA UTILITY REGULATORY COMMISSION DATED AUGUST 23, 2006 IN CAUSE NO. 38702-FAC57 1/97 _ 2) _ _ • (Rev Ф - - 1 ~ 0 \circ Ŧ _ - 661H002 0 _ = = HOLE HOLE ı _ ı といって 1 > 1 ٠, 1 × H 1 d 1 F DRM NO. 1 3 P. S. C...
AI summary This document excerpt outlines the availability provisions for a specific electric service rate schedule (DRM NO. 1) issued by the Indiana Utility Regulatory Commission. It specifies that the service is intended for customers using electricity for purposes other than residential use, provided it is through a single meter unless otherwise economical for the company. It also establishes that service will not be provided where the ultimate use is primarily residential and categorizes eligible customers based on secondary voltage levels.
FILED AUG 01 1999 April 23, 1999 DATE EFFECTIVE August 1, 1999 JUL 9 1996 9 4 - 1 9 9 MO. PIZIUC SERVICE COMM DATE OF ISSUE July 5, 1996 DATE EFFECTIVE July 9, 1996 month day YBBI month Yab year ISSUED BY S. W. Cattron Vice Pre esident 120...
AI summary The document is a formal filing from the Kansas City Power & Light Company (KCPL) regarding a revised retail service schedule (LPS Schedule) for Large Power Service in Missouri. It specifies technical details for metering at different voltages, outlining the percentage adjustments for metered demand and energy depending on whether metering is installed at the primary or secondary voltage of a customer's transformer. The company retains the option to install such equipment without compensation.
DETERMINATION OF MAXIMUM LOAD The load will be measured and will be the average KW demand delivered to the customer during the 15-minute period of maximum use during the appropriate rating period each month. The Company reserves the right...
AI summary The text defines the methodology for determining and measuring a customer's maximum load for billing purposes. It establishes that load is measured as the average KW demand during the 15-minute peak period each month. The Company maintains the option to use KVA meters, applying a 90 percent multiplier to the KVA measurement. Alternatively, if a KVA meter is not used, the Company may adjust the measured maximum KW load based on a formula that accounts for power factors below 90 percent.
TERMS AND CONDITIONS The customer, in order to earn the Primary or Transmission Service Rate must own and maintain or lease, at the Company's option, all transformers and other facilities necessary to take service at the Primary or Transmi...
AI summary The document outlines the specific terms and conditions for customers seeking to obtain Primary or Transmission Service Rates. It stipulates that customers must own, maintain, or lease all necessary transformers and facilities required to receive service at the delivered voltage, subject to the Company's options. The terms were issued on July 20, 2004, and became effective on October 31, 2004.
SPECIAL TERMS AND CONDJTTONS This tariff is subject to the Company's Terms and Conditions of Service. This tariff is also available to customers having other sources of energy who desire to purchase standby or back-up service from the Comp...
AI summary This section outlines the special terms and conditions for customers seeking standby or back-up service from the Company while maintaining other energy sources. Customers must contract for a maximum demand of at least 3,000 KW, with the Company not obligated to supply excess demand. Billing for such service is based on the highest demand recorded over the current and previous two billing periods. Additionally, the Company reserves the right to connect circuits to different points on a customer's distribution system if the load size necessitates multiple circuits.
AVAILABILITY OF SERVICE This schedule is available for three-phase power and lighting service to industrial customers whose monthly demand is equal to or greater than 2,000 kilowatts, the customer to furnish and maintain all necessary tran...
AI summary This section outlines the eligibility criteria for the industrial three-phase power and lighting service schedule. It specifies that industrial customers must have a monthly demand of at least 2,000 kilowatts and are responsible for providing and maintaining their own transformation and voltage regulatory equipment. The Company maintains the right to refuse new loads exceeding 50,000 kilowatts. Furthermore, it defines 'industrial' activity as manufacturing or other activities where lighting accounts for no more than 10% of total usage.
PRIMARY DISTRIBUTION AND TRANSMISSION LINES SERVICE The above demand charge for primary distribution and transmission line service are predicated on the customer's taking service at the applicable available voltage and furnishing, installi...
AI summary The text describes the prerequisites for the demand charge associated with primary distribution and transmission line services. It specifies that customers must take service at applicable voltages and are responsible for furnishing, installing, and maintaining all necessary substation structures and equipment. Additionally, it lists the nominal primary distribution voltages (ranging from 2,400/4 to 34,500) and transmission line voltages (69,000, 138,000, and 345,000) available from the Company.
AVAILABILITY In all territory served.
AI summary The document contains a section titled 'AVAILABILITY' which states that the service or item being discussed is available in all territory served.
RATE NO. 53 LARGE INDUSTRIAL ELECTRIC SERVICE Available for service supplied at a single point of delivery to any East System industrial customer for power, lighting, or other uses in connection with manufacturing and processing.
AI summary The text introduces Rate No. 53, which is designated for Large Industrial Electric Service. It specifies that this rate is applicable to customers on the East System who receive power at a single point of delivery for industrial purposes, specifically including manufacturing and processing activities.
MAXIMUM DEMAND: The maximum kilowatt demand in any month shall be the highest thirty-minute kilowatt demand established during the month. The maximum kilovar demand in any month shall be the highest thirty-minute kilovar demand established...
AI summary The document provides the technical definitions for 'maximum kilowatt demand' and 'maximum kilovar demand' within a monthly period. It specifies that these values are determined by identifying the highest thirty-minute demand recorded for kilowatts and kilovars, respectively, during a given month.
SERVICE FACILITIES: Service will be furnished at the nominal voltage of 7600/13,200 volts, three phase, four-wire, or at such higher voltage as may be available on the Company's system at the location served. The delivery voltage will be s...
AI summary The text specifies the technical requirements for service facilities. It establishes that service is typically provided at a nominal voltage of 7600/13,200 volts, three-phase, four-wire, or higher depending on system availability. It notes that the specific delivery voltage will be defined in the service contract and clarifies that customers are responsible for providing all necessary equipment, such as transformers and circuit breakers, required to receive service at the specified voltage.
RIDER NO.4 INTERRUPTIBLE POWER SERVICE Applicable to Rate Nos. 22, 41, 42 and 53 Availability of Rider No. 4 is limited to customers taking service under this rider on N December 31 , 1996, and only on the amount of service under contract...
AI summary The document defines the terms and limitations of Rider No. 4, which provides Interruptible Power Service to specific customers. Eligibility is restricted to those who contracted for the service by December 31, 1996, based on their service amounts as of that date. To qualify, customers must agree to interrupt at least 1,000 kW of their electric requirement upon the Company's request. The Company maintains the right to determine interruption times and durations, subject to an aggregate system load limit of 64,000 kW in the East System.
RIDER NO. 4 INTERRUPTIBLE POWER SERVICE (Cont.) Any interruptible customer shall notify the Company in writing in the event that it desires to discontinue interruptible service under this Rider and convert interruptible load to firm servic...
AI summary This text outlines the procedures for customers under Rider No. 4 (Interruptible Power Service) to discontinue interruptible service and convert their load to firm service. It specifies that customers must provide written notice to the Company, which must then return the customer to firm service as promptly as possible, subject to the Company's Rules and Regulations. The rider is applicable to Large General Service, Time-of-Use at Transmission Voltage in the North System, specifically for customers with permanent time-of-use metering.
curtailment periods. c c T 3rd Revised Sheet No. I'M7.10 Canceling 2nd Revised Sheet No. N-4 7.1 0 Rider No. 57 to Electric General Service and Large General Service· Curtailment Service (can't) Option B customers may request a change in t...
AI summary The text outlines the terms for Rider No. 57 (Curtailment Service) for Electric General Service and Large General Service. It specifies procedures for customers choosing Option A or Option B regarding firm power level changes and service cancellations. Key provisions include the forfeiture of credits upon cancellation for Option B, the Company's requirements for accommodating firm power increases, and the methodology for verifying and adjusting curtailable load based on historical demand during curtailment periods.
DEFINITIONS: Curtailment Service: Electric service which includes a credit for those customers who agree, on notice from the Company, to reduce electric demand to a predetermined level (firm power level). Firm Power Level: The level to whi...
AI summary This document excerpt provides formal definitions for terms related to 'Curtailment Service' and 'Firm Power Level' within the context of the Company's electric service. It defines 'Curtailable Load' as the difference between expected load at system peak and the agreed firm power level. The text also specifies the applicability of the Large General Service Time-of-Use at Transmission Voltage Price Schedule (LXP/LXO) to the South System territory.
N-46Rebuttal Evidence of NSPI - Appendix A to J - REDACTED (Large File 27 MB)
15 passages
NSPI is a fully integrated, regulated electricity utility that generates, transmits, and distributes electricity in the province of Nova Scotia. The Company is wholly owned by Emera Inc. (Emera), which is a diversified energy and energy-se...
AI summary The text provides a preamble identifying Nova Scotia Power Inc. (NSPI) as a fully integrated, regulated electricity utility in Nova Scotia, responsible for generation, transmission, and distribution. It notes that NSPI is a wholly owned subsidiary of Emera Inc., a diversified energy holding company listed on the Toronto Stock Exchange. Additionally, it specifies an authorized commercial paper amount of $400 million and notes that all figures are in Canadian dollars.
_Business Description Emera is a utility holding company based in Halifax, N.S. The primary subsidiaries of Emera are: - NSPI: NSPI provides electricity generation, transmission and distribution to Nova Scotia. The company is a regulated m...
AI summary This document provides a business description of Emera, a utility holding company based in Halifax, Nova Scotia. It outlines the primary roles of its subsidiaries: Nova Scotia Power Inc. (NSPI), which provides regulated electricity services in Nova Scotia, and Bayonne Hydroelectric Corporation (BHE), which operates in eastern Maine. Additionally, the text details Emera's diverse investments, including a pumped storage hydroelectric facility, a pipeline interest, and its energy services arm, as well as recent plans for a natural gas pipeline project in New Brunswick.
The reliability of NSPI's electricity transmission and distribution operations is typically within industry benchmarks but deteriorated to below industry average in 2004 (see table 4). System performance suffered during a severe winter sto...
AI summary The text evaluates the historical reliability of Nova Scotia Power Inc.'s (NSPI) electricity transmission and distribution operations. While generally meeting industry benchmarks, performance fell below average in 2004 due to a severe winter storm, leading to significant customer criticism. However, an independent study defended the utility's maintenance practices. In contrast, Bayonne Hydroelectric Corporation's (BHEC) wire operations are noted as consistently meeting regulatory benchmarks.
Nova Scotia Utility and Review Board Mailing address PO Box1692, Unit •M• Halifax. Nova Smtia B313S3 [email protected] Web www.nsuarb.ca Office 3rd Floor 1601 Lower Water Street Halifax, Nova Scotia B3J 3P6 902 424-4448 t 902 424-3919 f...
AI summary The Nova Scotia Utility and Review Board is reviewing Nova Scotia Power Industrial's (NSPI) request to recover $3.6 million for a Distribution System Vegetation Management program. While the Board acknowledges that vegetation encroachment is a primary cause of power outages and supports the program's necessity for reliability, it notes that NSPI failed to include this foreseeable expenditure in its 2007 test year revenue requirement filing. Consequently, approving the request now would result in a revenue requirement increase.
Confirmation of Revenue Request NSPI confirmed that the revenue request being applied for was the revenue requestfiledwith its evidence of October 10, 2006. It has not been amended and will not be amended by NSPI. The Board is certainly pr...
AI summary Nova Scotia Power Industrial (NSPI) confirmed that its revenue request remains unchanged from its October 10, 2006, filing. The Board indicated a willingness to approve the program provided that ongoing annual costs are included in future rate applications, a matter to be addressed in a subsequent hearing. Additionally, NSPI submitted responses to the Board's inquiries regarding the Liberty Consulting Group's report on distribution system vegetation management spending.
Liberty Conclusions - "1. NSPI based its proposed vegetation management program for the distribution system on reasonable assumptions. The well-planned program appears to maximize the benefits to customers for the requested level of spendi...
AI summary Nova Scotia Power Industrial (NSPI) submitted a proposed vegetation management program for its distribution system. The analysis concludes that the program is built on reasonable assumptions and is well-planned to maximize customer benefits relative to the requested spending. While the program is expected to improve system reliability, it is noted that it may not fully address existing customer dissatisfaction issues.
Liberty Recommendations "1. Require that NSPI justify the portion of the vegetation management budget related to customer-requested work and hazard trees. Ms. McNeil November 14, 2006 Page2 - 2. Approve the requested level of annual spendi...
AI summary The text outlines Liberty's recommendations regarding Nova Scotia Power Industrial's (NSPI) vegetation management budget. Liberty requests that NSPI justify the portion of the budget specifically allocated for customer-requested work and hazard trees. They propose approving an annual spending level of at least $7 million, contingent on this justification. Furthermore, Liberty recommends that the funding be restricted to distribution vegetation management and that NSPI provide annual reports comparing completed work against planned objectives.
NSPI Comment NSPI accepts Liberty's conclusions. We are encouraged by and in agreement with the Consultant's finding that NSPI's proposed Distribution System Vegetation Management Program is well-planned and should maximize benefits to cus...
AI summary Nova Scotia Power Industrial (NSPI) expresses agreement with Liberty's conclusions regarding the proposed Distribution System Vegetation Management Program. NSPI supports the finding that the program is well-planned and designed to maximize customer benefits relative to the requested spending. However, NSPI notes that the execution of expanded program recommendations remains contingent upon the Board's approval of additional funding.
Customer Requested Work Program (CRW) NSPI's Customer Requested Work Program is directed at addressing safety issues associated with vegetation in proximity to power lines. NSPI typically receives between three thousand and four thousand c...
AI summary Nova Scotia Power Industrial (NSPI) manages a Customer Requested Work Program (CRW) to address safety concerns regarding vegetation encroachment near power lines. NSPI receives 3,000 to 4,000 customer calls annually, with approximately 50% requiring crew dispatch. The company notes an increasing trend in these requests and has assumed an annual cost of $900,000 for vegetation management in its submission.
The table below provides NSPI costs for this program for 2004 and 2005. For the purpose of the annual distribution system vegetation management spend, $100 thousand has been forecast. Year Expenditure 2005 $104,943 2004 126,616 Summary
AI summary The text provides historical expenditure data for the Nova Scotia Power Industrial (NSPI) program for the years 2004 and 2005. It specifically notes that $100,000 has been forecast for the annual distribution system vegetation management spend.
The forecast unit price figure is based on actual costs for the period 2003-2005. The following table presents the actual annual vegetation cost and spans-addressed information. Year Distribution System Vegetation Management Cost Spans Add...
AI summary The document provides a historical analysis of distribution system vegetation management costs from 2003 to 2005 to establish a forecast unit price. It presents a table showing annual costs, spans addressed, and average costs per span, noting an average of $332 per span over that period. The author concludes that a system average figure of $325 per span is a reasonable basis for budget purposes, despite expected changes in the mix of vegetation work across different periods and regions.
By Fax Only: 428-6542 Mr. Eric Ferguson Manager, Regulatory Affairs Nova Scotia Power Inc. 14 th Floor, Barrington Tower P. O. Box 910, Scotia Square Halifax, NS B3J 2W5 Dear Mr. Ferguson: November Power Outage Review Decision Reports - NS...
AI summary The Nova Scotia Utility Review Board is requesting comments from Nova Scotia Power Inc. (NSPI) regarding Liberty Consulting Group's feedback on the November Power Outage Review Decision Reports. Specifically, the Board seeks clarification on the financial estimates for vegetation management spending, including the origin of the $325 per span unit price for trimming and the defined roles of various personnel, such as linemen, scopers, foresters, and contract tree trimmers.
Dear George: In its March 10, 2006, decision, the Nova Scotia Utility and Review Board (UARB) deferred the approval of a requested increase in expenditures for vegetation management of the distribution system until Nova Scotia Power Inc. (...
AI summary This document is a letter responding to a request from George regarding Liberty's evaluation of a report filed by Nova Scotia Power Inc. (NSPI). The report addresses a 2006 UARB decision that deferred approval for increased vegetation management expenditures on the distribution system. The UARB required NSPI to justify its spending by estimating potential reductions in outage and repair costs. The letter summarizes Liberty's review of NSPI's justifications and cost estimates.
Liberty concluded: - 1. NSPI based its proposed vegetation management program for the distribution system on reasonable assumptions. The well-planned program appears to maximize the benefits to customers for the requested level of spending...
AI summary The Nova Scotia Utility and Review Board (UARB) concluded that Nova Scotia Power Industrial's (NSPI) proposed vegetation management program for the distribution system is based on reasonable assumptions. The Board found that the program is well-planned and effectively maximizes customer benefits relative to the requested spending level. However, it noted that while the program is expected to improve system reliability, it may not fully address existing issues regarding customer dissatisfaction.
Liberty recommends that the UARB: - 1. Require that NSPI justify the portion of the vegetation management budget related to customer-requested work and hazard trees. - 2. Approve the requested level of annual spending of at least $7 millio...
AI summary Liberty recommends that the Nova Scotia Utility and Review Board (UARB) require Nova Scotia Power Industrial (NSPI) to provide a detailed justification for the portion of its vegetation management budget dedicated to customer-requested work and hazard trees. While Liberty acknowledges that NSPI's proposed non-cyclical approach is more cost-effective than a cyclical one, it argues that a cyclical program would offer superior storm hardening and reliability for rural customers. Liberty supports the requested annual spending of at least $7 million provided the budget is used exclusively for distribution vegetation management.