Topic:"Efficient Product Installation Epi" in M03452

Small Business Direct Install Program Stage: Application Form signed Forms: Application Form Customers :

AI summary The document outlines the 'Small Business Direct Install Program' at the stage where the application form has been signed. It includes forms related to customer participation in the program, though specific details are not provided in the text.

 In 2010, the CFL component of the Efficient Products – Retail program accounted for 88% of the program‘s energy savings from retail product sales. As a result of the upcoming phase-out of incandescent bulbs starting in January 2012, the...

AI summary The Efficient Products – Retail program and Direct Install program are facing challenges due to the phase-out of incandescent bulbs and the diminishing energy savings from CFLs. Other programs, such as the Low Income Households and New Houses programs, significantly underperformed their energy savings targets.

ASK THEM FOR THEIR BEST GUESS. IF THEY CANNOT PROVIDE A SINGLE BEST GUESS, ASK THEM FOR AN APPROXIMATE RANGE. TRY, AS FAR AS REASONABLY POSSIBLE, TO AVOID A DON‘T KNOW RESPONSE] A. B. C. D. LIGHT FIXTURES Jan-Sept. 2010 Oct-Nov Dec 2010 Oc...

AI summary The text provides a table structure for light fixture rebate percentages across different time periods, indicating a focus on appliance rebate programs and their performance over time.

CFLs Finding Recommendation DI-F6. DI-R6. Nearly seven out of ten 2010 respondents (69%) reported that Consider adjusting incentive levels for CFLs. This they were aware of the benefits of CFLs; about two out of five may, for example, incl...

AI summary The text discusses the awareness and adoption of CFLs and LEDs among business respondents before and after participating in the Direct Install (DI) program. It highlights that while many were aware of the benefits, there was significant untapped potential for further CFL installation even after program participation.

contain CFLs even after participating in the program. In addition, nearly one in five respondents (19%) said that fewer than 50% of their sockets contained CFLs after participating in the program. NMR Evaluation of 2010 Efficient Lighting...

AI summary The evaluation of the 2010 Efficient Lighting Products Direct Install Program found that nearly 19% of respondents reported that fewer than 50% of their sockets contained CFLs even after participating in the program.

that 30% of their exit signs did not contain LEDs. In addition, nearly three out of ten respondents (27%) said that even after participating in the DI program none of their exit signs contained LEDs. Satisfaction with the Program Finding R...

AI summary The evaluation of the 2010 Efficient Lighting Products Direct Install Program found that 30% of exit signs did not contain LEDs, even after participation in the program. Most respondents were satisfied with the program overall, with 97% expressing satisfaction and 85% being very satisfied.

thin the small business sector. NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 2 Table 2-3: Types of Lighting Retrofits Offered Measure Offered 2008 2009 2010 13 watt mini-twister CFL Yes Yes Yes 16 watt min...

AI summary The 2010 DI program continued to offer various lighting retrofit measures, including CFLs and LED exit lights, and partnered with local organizations to promote the program. The program relied on trained representatives and outbound calling to reach small businesses, though word-of-mouth marketing reduced the need for calling in later years.

areas to partner with the program.  Telephone outreach. The telephone calls made by trained representatives generate interest among potential participants.  On-site visits. Sufficient training is provided to representatives that visit cu...

AI summary The text outlines the implementation of the Efficient Lighting Products Direct Install Program, highlighting methods such as telephone outreach, on-site visits, and installation of energy-efficient lighting products like CFLs and LEDs in small businesses across Nova Scotia.

net-to-gross ratio was calculated based on spillover and free-ridership. For the 2010 program year, the net-to-gross ratio for the program was 77% for CFLs and 83% for LED Exit Lights. (Table 3-12) Table 3-12: 2010 Net-to-Gross Ratio 2010...

AI summary The 2010 Efficient Lighting Products Direct Install Program had a net-to-gross ratio of 77% for CFLs and 83% for LED Exit Lights, calculated based on spillover and free-ridership rates. The table provides detailed breakdowns of these metrics for the program year.

77% 83% NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 22 3.7 Energy Savings Estimation Table 3-13 presents the net installed annual energy and demand savings for the 2010 Efficient Products Direct Install p...

AI summary The 2010 Efficient Products Direct Install program achieved significant energy and demand savings, exceeding its goals and surpassing the combined savings of previous years. The majority of savings came from CFL installations, with LED Exit Lights contributing a smaller portion. The program showed substantial growth compared to 2008 and 2009.

1,624 341 Total program 25,233 5,291 11 Program staff are of the opinion that growth may have peaked in 2010. NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 23 4 Process Evaluation 4.1 Methodology The 2010 p...

AI summary The 2010 process evaluation of the Direct Install component of the Efficient Lighting Products Program involved in-depth interviews with program staff and contractors, as well as comparisons with previous evaluations from 2008 and 2009.

5 1 51 to 60 4 1 4 1 3 1 4 <1 6 3 <1 61 to 70 6 1 2 1 4 1 3 <1 8 1 <1 71 to 80 1 0 2 0 4 1 3 <1 4 1 2 <1 81 to 90 3 0 2 0 3 2 <1 3 1 91 to 100 0 0 2 0 1 2 <1 1 1 100 or more 10 1 11 0 31 1 17 <1 21 6 Average installed 40 8 41 7 299 9 62 3...

AI summary The text discusses the sampling error for the 2008, 2009, and 2010 telephone surveys conducted as part of the evaluation of the 2010 Efficient Lighting Products Direct Install Program. It notes that the sampling error was less than 10% at the 90% confidence interval for each survey.

7 1 † † Don‘t know 1 10 5 33 3 29 NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 29 4.6 Participation Barriers The vast majority of 2010 respondents (92%) reported facing no barriers to participation in the...

AI summary The 2010 Direct Install program faced minimal participation barriers, with 92% of respondents reporting none. The most common barrier cited was fixture incompatibility, affecting 60% of those who faced issues.

σ 13 requirements Some fixtures retrofitted σ 13 before program Not considered a small σ 13 business Perceived danger of 2 CFL‘s σ† Too little incentive 12 Too little information σ† 12 about the program Scheduling 1 2 Don‘t know/None 88 98...

AI summary The text presents a summary of customer feedback on the 2010 Efficient Lighting Products Direct Install Program, highlighting issues such as perceived danger of CFLs, lack of incentive, insufficient information, and scheduling challenges. The evaluation is conducted by NMR.

4 † † Don‘t know 16 20 40 NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 31 4.7 Purchase and Use Behaviors 4.7.1 Socket Saturation In the survey, 2009 and 2010 respondents were asked to quantify the penetrat...

AI summary The survey results show significant increases in the use of CFLs and LED exit lights among participants in the 2010 Efficient Lighting Products Direct Install Program. However, a notable portion of respondents still had low penetration of these products, suggesting potential gaps in program implementation or awareness.

33 69 Average 27% 76% 29% 65% 30% 80% 36% 70% Question not asked in 2008; Unweighted data NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 32 4.7.2 CFLs Installed and Removed The majority of respondents (86%)...

AI summary The evaluation of the 2010 Efficient Lighting Products Direct Install Program found that 86% of respondents did not remove any installed CFLs, with only seven respondents reporting removal due to various reasons such as bulb failure, breakage, or negative perceptions. Disposition of removed CFLs varied, with some discarded, stored, or unaccounted for.

Doesn‘t fit properly 2 Bulb not bright enough 1 Don‘t know 1 1 1 2 2008 2009 2010 Disposition of Removed Lights CFLs LEDs CFLs LEDs CFLs LEDs Sample size 3 2 8 1 7 0 Threw away 1 4 Put in storage 2 1 6 2 Gave away 1 Don‘t know 1 1 1 1 NMR...

AI summary The text presents a table summarizing the disposition of removed lighting products (CFLs and LEDs) from 2008 to 2010, including actions such as throwing away, putting in storage, and giving away. It also includes responses from participants regarding the performance of the lighting products.

% σ Aware of benefits of LED exit lights 37% 40% 44% Table 4-12: Prior Purchases of Efficient Lighting Products Respondents Previously Purchased Products 2008 2009 2010 Sample size 70 70 77 Yes 70% 65% 69% Type of Purchases 2008 2009 2010...

AI summary The document presents data on the prior purchases of efficient lighting products by respondents in 2008, 2009, and 2010, with a focus on CFLs and LED exit lights. It also references the evaluation of the 2010 Efficient Lighting Products Direct Install Program by NMR.

<1 NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 34 Slightly more than one-quarter of 2010 respondents (26%) reported having had plans to install CFLs or LEDs prior to participating in the DI program, with...

AI summary The 2010 Efficient Lighting Products Direct Install Program led to additional CFL and LED installations, with 19% of respondents installing more bulbs post-program. Most of these installations were CFLs, and over one-third were of the same or higher efficiency level. The program influenced 78% of respondents who made additional installations.

N/A σ No influence on decision 50 14 N/A Question not asked in 2010 Table 4-15: Influence of DI Program on Decision to Install Additional CFLs and LEDs Rating: 5= ‘extremely influential’ and 1 = ‘no influence’ n 5 4 3 2 1 Influence on deci...

AI summary The document evaluates the influence of the Direct Install (DI) Program on customers' decisions to install additional CFLs and LEDs. In 2008 and 2009, respondents were asked about the program's influence, and in 2010, a rating scale was introduced to assess influence more precisely.

9 8 Insulation 16 8 8 Refrigeration 5 5 8 Scoping, feasibility, technical 5 7 4 assessments Solar hot water 4 Cooling 5 3 Applied for a grant 5 Motors 3 NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page 37 4.7....

AI summary The survey found that 82% of respondents used their new efficient lighting products about the same as the lighting that had been replaced, indicating stable usage behavior post-installation.

σ 1 1 7 4 mall Service 3 6 5 7 3 2 Public order & 1 1 3 safety † σ Religious worship 19 10 14 8 † † Education 4 3 7 † Seniors‘ home 1 8 6 27 2 σ† Recreation 5 Manufacturing 2 Other/Missing 11 4 1,924 3 2,563 (Count) Based on program tracki...

AI summary The evaluation of the 2010 Efficient Lighting Products Direct Install Program indicates that a majority of respondents had facilities with less than 50,000 square feet of floor space, with nearly 40% having facilities under 5,000 square feet. This data is based on program tracking records.

_) 99. Don‘t know NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page B3 9. What was the ONE most important reason your company / organization chose to participate in the program? (Do not read) 1. (To take advant...

AI summary The text presents a survey question asking participants to identify the most and second most important reasons for joining the 2010 Efficient Lighting Products Direct Install Program, with multiple response options provided.

ded by contractor) 11. (Past participation in utility programs) 12. (Other (Please explain )) 99. (Don‘t know/Don‘t recall) 11. Prior to your company / organization participating in the Efficient Lighting Products Program were you aware th...

AI summary The text presents a series of survey questions aimed at evaluating prior awareness and participation in the Efficient Lighting Products Direct Install Program. Questions focus on awareness of CFLs and LED exit lights, as well as previous purchases of energy-efficient lighting products.

T-12 lighting with high efficiency lighting T-8s or T-5s 4. Metal Halide or High Pressure Sodium 5. Other (Specify: _) 9. (Don‘t know/Don‘t recall) 14c. Before participating in the Efficient Lighting Products Program, what percentage of yo...

AI summary The text includes survey questions about lighting usage and participation in the Efficient Lighting Products Program, focusing on the percentage of screw-base light sockets and exit signs containing CFLs or incandescent lamps before and after program participation. It also references the Nova Scotia Power (NMR) and an evaluation of the 2010 program.

RANGE, RECORD MIDDLE VALUE, OR ROUND UP. IF ‗DON‘T KNOW,‘ PROBE FOR BEST GUESS TO NARROW IN ON A NUMBER.] [RECORD PERCENT] _% [999=Don‘t know/Don‘t recall] 17. What percent of these compact fluorescent bulbs did you remove? Again, I‘m aski...

AI summary The text is part of a survey or evaluation form asking participants about the removal of compact fluorescent bulbs installed through the Efficient Lighting Products Program, including reasons for removal and what was done with the removed bulbs.

t bulbs you removed? (Threw away) (Put them away, stored them) (Gave them away) (Installed them at another location) (Other [Specify _]) 9. Don‘t know/Don‘t recall (IF Q15=1, Go to FR1) For the next few questions I would like you to think...

AI summary The text includes survey questions about the removal and disposal of LED exit lights installed through the Efficient Lighting Products Program, asking respondents about the percentage removed, reasons for removal, and what was done with the removed bulbs.

d no influence at all on your NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page B9 decision to install the energy efficient CFLs‖ and 5 indicates that the program was ―extremely influential to your decision to...

AI summary The text evaluates the influence of various elements of the 2010 Efficient Lighting Products Direct Install Program on participants' decisions to install energy-efficient CFLs and LED exit lights, using a scale from 1 to 5.

tremely influential to your decision to install the LED exit lights.‖ How influential was / were the: Element (READ) (a) Performance of Measure 1 2 3 4 5 9 a. Free LED exit lights no extremely DK influence influential b. Free Installation...

AI summary The text discusses customer feedback on the installation of LED exit lights and CFLs through the Efficient Lighting Products Program, focusing on factors influencing installation decisions and satisfaction levels with the products.

D LIST] Light Quality 1. (Bulb is too bright) 2. (Bulb is not bright enough) 3. (Don‘t like the overall quality of the light) 4. (Don‘t like the color of the light—it is too [SPECIFY: _]) Function/Performance 5. (Delay in light coming on)...

AI summary The text outlines customer feedback on lighting products installed under the Efficient Lighting Products Direct Install Program, focusing on issues related to light quality, function/performance, and physical limitations. It includes survey questions about satisfaction with LED exit lights and reasons for dissatisfaction.

NMR Evaluation of 2010 Efficient Lighting Products Direct Install Program Page B18 Cloudy % Dark % Bright % Section IV. Firmographics What is the principal building activity where the energy efficiency improvements were implemented? [DO NO...

AI summary The document contains a survey form from the Evaluation of the 2010 Efficient Lighting Products Direct Install Program. It includes questions about building activity, floor space, number of employees, and company structure. The survey is part of an assessment of energy efficiency initiatives.

rom HP lighting is a major issue for professionals who are designing new buildings and for building managers who are seeking to replace lighting equipment.  Lack of experience with HP lighting. Design professionals, building managers and...

AI summary The document discusses challenges with the adoption of high-performance (HP) lighting, including a lack of experience among professionals and end users' unawareness of incentivized HP lighting. It also notes the difficulty in verifying the installation of program incentivized lighting, particularly for smaller projects.