Topic:"Energy Efficiency Portfolio Standard Eeps" in M09096

NS Power IR-15 Attachment 1 Page 154 of 206 Figure 39: Electricity Use and Number of Customers1 Figure 40: Gas Use and Number of Customers1 MARKET STRUCTURE OVERVIEW The electric and natural gas Energy Efficiency Portfolio Standard (EEPS)...

AI summary The document outlines the Market Structure Overview of the Energy Efficiency Portfolio Standard (EEPS) in New York State, established in 2008 by the Public Service Commission. It details the role of NYSERDA, the System Benefits Charge (SBC), and the transition to the Clean Energy Fund (CEF) in 2016. The Commission oversees program evaluations and reporting.

here is some collaborative programs as well. They are funded by the PSC and act like more of a centralized service. The EEPS was replaced by the Clean Energy Fund (CEF) in February of 20163. 1 Consolidated Edison Inc., “6-Year Financials a...

AI summary The text discusses collaborative energy efficiency programs funded by the PSC and mentions the replacement of the Energy Efficiency Portfolio Standard (EEPS) with the Clean Energy Fund (CEF) in February 2016. It also references external documents related to energy efficiency programs and regulations.

NS Power IR-15 Attachment 1 Page 157 of 206 Figure 41: NYSERDA Efficiency Programs: Energy Savings and Program Costs: 1998-20097 The figure above summarizes NYSERDA administered programs from 1998- 2008. It also includes three energy effic...

AI summary The document discusses NYSERDA's energy efficiency programs from 1998 to 2008, including programs administered on behalf of Consolidated Edison, National Fuel Gas, and National Grid. It outlines New York State's electricity use reduction target of 15% for the 2008-2015 period as part of the Energy Efficiency Portfolio Standard (EEPS), divided into two phases.

2013 852,363 2014 1,251,943 1,399,660 Up 2015 to September 2015 INCENTIVE RATE SETTING2 The incentive setting process involves collaborative discussions between the utilities, NYSERDA and other interested stakeholders. The goal is to achie...

AI summary The text outlines the incentive rate setting process involving utilities, NYSERDA, and stakeholders, aiming for statewide uniformity in qualifying technology and incentive levels. It also lists existing programs under the EEPS, including a residential electric rebate program for HVAC systems, electric heat pump water heaters, and programmable thermostats.

33% Hydroelectric 22% Other Renewables 6% NYSERDA OVERVIEW NYSERDA s mandate is to promote energy efficiency and the use of renewable energy sources. The objectives are to reduce greenhouse gas emissions, accelerate economic growth and red...

AI summary NYSERDA's mandate includes promoting energy efficiency and renewable energy to reduce greenhouse gas emissions and customer energy bills. The organization is primarily funded by the Systems Benefit Charge (SBC), which supports energy conservation programs and has recently transitioned to the Clean Energy Fund (CEF). NYSERDA collaborates with various stakeholders to advance New York's clean energy economy.

2016. The SBC is used to fund the Energy Efficiency Portfolio Standard (EEPS). Recently, the EEPS has been replaced by the Clean Energy Fund (CEF). Other sources of funding include:  Regional Greenhouse Gas Initiative (RGGI)  Renewable P...

AI summary The System Benefits Charge (SBC) funds the Energy Efficiency Portfolio Standard (EEPS), which has been replaced by the Clean Energy Fund (CEF). Other funding sources include the Regional Greenhouse Gas Initiative (RGGI) and the Renewable Portfolio Standard (RPS). The RGGI is focused on energy efficiency and carbon abatement, while the RPS is focused on acquiring renewable energy. Retail electricity prices for Con Edison customers in 2014 are also provided.

NON-CONFIDENTIAL 1 • a review of the economic impact of the energy efficiency industry in Nova Scotia; and 2 • receipt, analysis and utilization of NS Power customer usage data to aid in program- 3 specific marketing campaigns and promotio...

AI summary EfficiencyOne collaborates with governments to advance energy efficiency standards and regulations in Nova Scotia. It participated in various committees and working groups to support the development of national and regional energy efficiency standards, including the National Energy Code for Buildings and the Pan-Canadian Framework on Clean Growth and Climate Change.

its independent evaluator to evaluate impacts related to changes in codes 7 and standards on a year-to-year basis and intends to continue to do so as part of the 2020-2022 8 DSM Resource Plan. Date Filed: March 29, 2019 E1 (NS Power) IR-28...

AI summary The text discusses the evaluation of impacts related to changes in energy codes and standards on a year-to-year basis as part of the 2020-2022 DSM Resource Plan. It references a regulation amending the Energy Efficiency Regulations, 2016, published in the Canada Gazette.

NS Power IR-28 Attachment 1 Page 15 of 80 3/15/2019 Canada Gazette, Part 2, Volume 152, Number 22: Regulations Amending the Energy Efficiency Regulations, 2016 Large heat pumps that have a Heating coefficient of performance ≥ cooling capac...

AI summary This document outlines energy efficiency standards for large heat pumps, specifying minimum heating coefficients of performance and integrated energy efficiency ratios, with applicable standards and periods of manufacture.

Canada Gazette, Part 2, Volume 152, Number 22: Regulations Amending the Energy Efficiency Regulations, 2016 38 Section 369 of the Regulations is replaced by the following: Definitions 369 The following definitions apply in this Division. C...

AI summary This document outlines amendments to the Energy Efficiency Regulations, 2016, specifically updating definitions and energy efficiency standards for gas-fired and electric water heaters. It references the CSA P.3-15 standard for testing and introduces new criteria for electric water heaters, including input rate and storage volume requirements.

g and operating a metal halide lamp that has a nominal power of at least 50 W but not more than 1 000 W. It does not include any of the following: (a) a magnetic­regulated lamp ballast; (b) a replacement metal halide lamp ballast; or (c) a...

AI summary The text defines and regulates metal halide lamp ballasts as energy-using products under specific energy efficiency standards. It excludes certain types of ballasts, including those manufactured before specific dates and those with certain voltage capabilities. Testing procedures are outlined in CSA C863-16.

t meets that standard when tested in accordance with testing procedures established by CSA C863­16 that are applicable to a metal halide lamp ballast as defined in section 453. Information http://gazette.gc.ca/rp­pr/p2/2018/2018­10­31/html...

AI summary The text outlines regulatory amendments to the Energy Efficiency Regulations, 2016, focusing on requirements for metal halide lamp ballasts and the definition of ceiling fan light kits. It references testing procedures from CSA C863-16 and specifies information that must be collected and provided to the Minister.

eater than 40 km/h over a distance of 1.6 km on a paved level surface; and (d) has a loaded weight, as specified by its manufacturer, of less than 1 361 kg. (véhicule à basse vitesse) 10 C.F.R. Appendix Y means Appendix Y to Subpart B, Par...

AI summary The text defines a low-speed vehicle and outlines energy efficiency standards for battery chargers, referencing specific regulations and testing procedures such as CSA C381.2-17 and 10 C.F.R. Appendix Y. It also specifies that battery chargers manufactured after June 13, 2019, are subject to these standards.

eans a walk­in door assembly that is designed for product display and that has 75% or more of its surface area composed of glass or other transparent material. (assemblage de porte de présentation) floor panel means a walk­in panel that is...

AI summary The text defines various terms related to walk-in door assemblies and panels, including display door assemblies, freight door assemblies, passage door assemblies, and structural panels, as part of regulations amending the Energy Efficiency Regulations, 2016.

99.39 Information 706 (1) For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a dry­type transformer: (a) if applicable, information that indicates whether the transformer...

AI summary The document outlines regulatory requirements for dry-type transformers, specifying the information that must be provided to the Minister, including voltage class, BIL rating, kVA rating, and efficiency. It also references standards for collecting this information, such as CSA C802.2-12 and 10 C.F.R. Appendix A.

iciency test methods for small motors. (CSA C747­09) IEEE 114­2010 means the IEEE standard IEEE 114­2010 entitled IEEE Standard Test Procedure for Single­Phase Induction Motors. (IEEE 114­2010) small electric motor means a machine that con...

AI summary The text defines small electric motors and outlines energy efficiency regulations, including test methods and standards such as CSA C747-09 and IEEE 114-2010. It specifies technical criteria for small electric motors and prescribes them as energy-using products under regulatory frameworks.

80 3/15/2019 Canada Gazette, Part 2, Volume 152, Number 22: Regulations Amending the Energy Efficiency Regulations, 2016 800 The following definitions apply in this Division. commercial pre­rinse spray valve means a handheld device for spr...

AI summary This text outlines the definitions and regulations related to commercial pre-rinse spray valves as energy-using products under the Energy Efficiency Regulations, 2016. It specifies the testing standards, compliance requirements, and the effective dates for these regulations.

hanges have to be implemented in Canada to reduce unnecessary regulatory differences, support cross­border trade and investment, and ultimately reduce costs to citizens, businesses and economies. Description: This amendment to the Energy E...

AI summary This amendment to the Energy Efficiency Regulations, 2016 introduces new energy performance standards, labelling, and reporting requirements for six product categories, increases standards for 11 existing categories, and removes import reporting requirements for certain products, aiming to harmonize regulations and reduce costs.

reporting requirements for currently regulated product categories; and (d) provides flexibility for testing requirements and removes import reporting requirements for certain product categories. Cost­benefit statement: The benefits and cos...

AI summary The Amendment to energy efficiency regulations introduces updated reporting requirements and removes import reporting for certain product categories. A cost-benefit analysis estimates a net benefit of $4.55 billion by 2030, with energy savings and greenhouse gas reductions as primary benefits. Payback periods for most product categories are less than eight years, with some as short as two years.

m energy performance standards (MEPS), 2 for product labelling, and for the promotion of energy efficiency and alternative energy use, including the collection of data and statistics on energy use. The Energy Efficiency Regulations were in...

AI summary The Energy Efficiency Regulations, introduced in 1995 and updated in 2016, set minimum energy performance standards (MEPS) and labelling requirements for consumer and commercial energy-using products. The regulations aim to reduce greenhouse gas emissions by promoting energy efficiency and alternative energy use, and are regularly amended to include new products and update requirements.

nergy use, a lack of capacity within organizations to understand and manage energy use, and split incentives (e.g. landlords may not purchase efficient equipment if tenants pay the energy bill). In 2011, the Canada–United States Regulatory...

AI summary The text discusses the need for regulatory action to reduce energy consumption and GHG emissions by aligning Canadian energy efficiency standards with those of the U.S., addressing unnecessary regulatory differences, and reducing the load on the electricity system. It highlights challenges such as split incentives and the limitations of voluntary measures.

port reporting provisions, will come into force upon publication, while the balance of the Amendment will come into force six months after the date of publication in the Canada Gazette, Part II. The MEPS established by the Amendment will a...

AI summary The text discusses amendments to the Energy Efficiency Regulations, 2016, introducing MEPS, labelling, and reporting requirements for new product categories such as battery chargers and commercial pre-rinse spray valves, aligning them with U.S. standards effective from specific dates.

NS Power IR-28 Attachment 1 Page 63 of 80 3/15/2019 Canada Gazette, Part 2, Volume 152, Number 22: Regulations Amending the Energy Efficiency Regulations, 2016 In the event that a jurisdiction repeals or revokes a standard or test procedur...

AI summary The text discusses amendments to the Energy Efficiency Regulations, 2016, ensuring that repealed standards continue to apply. It highlights the status quo's limitations in reducing GHG emissions and compliance costs, and notes increased market share of more efficient products since 2010, though many non-compliant products remain. A regulatory approach is proposed to ensure all products meet stricter MEPS.

ted in Canada. In these cases, the regulatory regimes are different in each country, but do not create a burden for industry, since no energy efficiency requirements need to be satisfied in Canada. Regulatory action Taking regulatory actio...

AI summary Regulatory action to align MEPS for 17 product categories with the US will reduce compliance costs and unnecessary regulatory differences, leading to lower energy consumption and GHG emissions. This approach offers the largest emissions reductions among the options considered.

eeking more details on this analysis can request a copy of the cost­benefit analysis document by contacting the individual named at the end of this document. Methodology, assumptions and data http://gazette.gc.ca/rp­pr/p2/2018/2018­10­31/h...

AI summary Natural Resources Canada conducted a cost-benefit analysis to evaluate the economic gains and societal impacts of more stringent Minimum Energy Performance Standards (MEPS). The analysis compared a business-as-usual scenario with one that included the proposed Amendment.

arket; energy savings from the business­as­usual case to the policy case; costs of moving from the business­as­usual case to the policy case; product lifetime; and installation costs. Results http://gazette.gc.ca/rp­pr/p2/2018/2018­10­31/h...

AI summary The text discusses the methodology used to estimate the benefits and costs of an amendment to the Energy Efficiency Regulations, 2016, applied across various product categories. The results show varying impacts based on the product category and the increase in stringency of the Minimum Energy Performance Standards (MEPS).

to the other MEPS since they are already in effect in the United States. In those cases, the business­as­usual case represents the Canadian market after it has been influenced by U.S. regulations. Table 4: Business­as­usual case sensitivit...

AI summary The text discusses a sensitivity analysis of the business-as-usual case for energy efficiency regulations, showing the costs and benefits of reducing the number of product models impacted by the amendment. It references a table with figures in millions of dollars and notes that rounding may affect totals.

any costs or benefits to the implementation of the MEPS for these three product categories, this Amendment will prevent future dumping of low­efficiency product models into the Canadian market. Another benefit of the Amendment is related t...

AI summary The Amendment to energy efficiency regulations introduces new product categories under MEPS, preventing low-efficiency products from entering the Canadian market. It also reduces administrative burden by removing reporting requirements for three existing products, resulting in net savings. The amendment is considered an 'OUT' under the 'One-for-One' Rule.

NS Power IR-28 Attachment 1 Page 72 of 80 3/15/2019 Canada Gazette, Part 2, Volume 152, Number 22: Regulations Amending the Energy Efficiency Regulations, 2016 removal of import reporting is in force upon publication and although Canada Bo...

AI summary The document discusses amendments to Canada's Energy Efficiency Regulations, 2016, including the removal of import reporting requirements and alignment of the period of manufacture with U.S. dates. Industry stakeholders raised concerns about potential confusion, and Natural Resources Canada has agreed to consider specific Canadian market periods on a case-by-case basis.

in accordance with World Trade Organization/Technical Barriers to Trade commitments) to ensure that energy­using products that are imported or shipped between provinces comply with the Regulations. Energy Efficiency Act — implementing new...

AI summary The document discusses the implementation of the Energy Efficiency Act, alignment with international standards, import reporting exceptions, and stakeholder concerns about verification costs for battery chargers. Industry associations and Natural Resources Canada are involved in consultations and clarifications.

n one or a few provinces. Rationale The Amendment will benefit Canadians by both reducing GHG emissions and removing unnecessary regulatory differences between Canada and the United States. According to the International Energy Agency, pol...

AI summary The Amendment to the Energy Efficiency Regulations aims to reduce GHG emissions and eliminate regulatory differences between Canada and the U.S. by implementing more stringent MEPS. This will lead to lower energy consumption, reduced emissions, and long-term cost savings for consumers despite higher initial purchase costs for low-efficiency products.

ysis has shown that the costs of technologies that will be required to bring low­efficiency products into compliance with the MEPS are outweighed by the benefits attributable to those technologies. The development of the Amendment was info...

AI summary The text discusses the benefits of aligning energy efficiency regulations with U.S. standards and highlights the historical development of the Energy Efficiency Regulations, including 13 amendments since 1995. It also outlines the implementation timeline and enforcement procedures for the Amendment.

ipment­[email protected] (mailto:nrcan.equipment­[email protected]) Footnotes a S.C. 2009, c. 8, s. 5 b S.C. 1992, c. 36 1 SOR/2016­311 http://gazette.gc.ca/rp­pr/p2/2018/2018­10­31/html/sor­dors201­eng.html 77/80 Date Fi...

AI summary The document references regulatory amendments to the Energy Efficiency Regulations, 2016, including the use of 'minimum energy performance standard' (MEPS) and citations to international assessments and regulatory cooperation initiatives between Canada and the United States.

plant that is needed to meet the electricity demand at a given time. The costs and emissions from that power plant are used to calculate the reduced emissions owing to the Regulations. 20 Consistent with the discount rate used by the Pan­C...

AI summary The text discusses the calculation of reduced emissions based on power plant costs and emissions, referencing the Pan-Canadian Framework and Treasury Board Secretariat recommendations. It also lists various appliances and equipment covered by energy efficiency standards and mentions stakeholder engagement in the regulatory process.

r­regulatory­ cooperation.html) 32 IEA/OECD, 2011. Summing up the Parts — Combining Policy Instruments for Least­Cost Climate Mitigation Strategies, p. 8. http://gazette.gc.ca/rp­pr/p2/2018/2018­10­31/html/sor­dors201­eng.html 79/80 Date F...

AI summary The text includes references to regulatory cooperation, climate mitigation strategies, and energy efficiency regulations. It also lists government initiatives under the 2018 Canadian budget, including advancement, reconciliation, and progress themes.

vels by 2030, grow the economy, and build resilience to a changing climate. Further mitigation efforts are needed to support the achievement of Canada’s greenhouse gas emissions reduction target. In 2017, federal, provincial and territoria...

AI summary The document outlines the need for further mitigation efforts to meet Canada's greenhouse gas emissions reduction targets, and describes a proposed amendment to the Energy Efficiency Regulations, 2016, aimed at improving the energy efficiency of heating and ventilation products through updated standards and reporting requirements.

NS Power IR-28 Attachment 2 Page 2 of 44 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 42: Regulations Amending the Energy Efficiency Regulations, 2016 (Amendment 15) categories; and (c) introduce labelling and reporting requirement...

AI summary This document discusses amendments to Canada's Energy Efficiency Regulations, aimed at reducing greenhouse gas emissions and supporting the 2030 emission reduction target. The amendment is expected to reduce emissions by 0.92 megatonnes annually by 2030, with a net benefit of $1.80 billion. The benefits are estimated to exceed costs by more than two to one.

nd territorial governments contribute to the positioning of Canada as a global leader in efforts to improve the energy efficiency of equipment used to heat space and water in the building sector. Domestic regulatory cooperation has been gu...

AI summary This text discusses the regulatory cooperation efforts in Canada to improve energy efficiency in building sector equipment, aligning with international and federal commitments, including the Pan-Canadian Framework and the Canada–United States Regulatory Cooperation Council. It also references the Energy Efficiency Act and its amendments.

approach, the federal government committed to set new standards for heating equipment and other key technologies to the highest level of efficiency that is economically and technically achievable. This commitment builds on the August 2016...

AI summary The federal government committed to setting new energy efficiency standards for heating equipment and other technologies to the highest economically and technically achievable levels. This aligns with the Energy and Mines Ministers’ Conference and the Canadian Energy Strategy, aiming to reduce building sector energy consumption and GHG emissions. A 2018 report by the Generation Energy Council emphasized energy efficiency's role in meeting Canada's emission reduction targets.

NS Power IR-28 Attachment 2 Page 5 of 44 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 42: Regulations Amending the Energy Efficiency Regulations, 2016 (Amendment 15) The regulatory changes outlined below have been developed to supp...

AI summary The document outlines regulatory changes to the Energy Efficiency Regulations, 2016, aimed at introducing new MEPS, labelling, and reporting requirements for seven new product categories, including electric furnaces, as part of a federal initiative to improve energy efficiency standards.

EPS at condensing technology levels equivalent to current ENERGY STAR performance levels. Performance would be measured in accordance with testing standards aligned with those of the United States. Oil­fired boilers (commercial) Commercial...

AI summary The text outlines energy efficiency standards for commercial oil-fired boilers and electric water heaters, referencing the U.S. Department of Energy's regulations and testing standards. It specifies performance levels aligned with ENERGY STAR and MEPS criteria for equipment manufactured after certain dates.

f these goals. It would also lead to missed opportunities to reduce energy consumption, leaving consumers and businesses with higher energy costs for heating associated with the building sector. The status quo option would not deliver on t...

AI summary The status quo and voluntary approach options fail to meet federal and provincial goals for energy efficiency, including the 2025 target for heating equipment. The status quo does not align with the Pan-Canadian Framework on Clean Growth and Climate Change, while the voluntary approach would not sufficiently reduce GHG emissions or energy consumption.

tion to the extent that a regulatory approach would. A voluntary approach would also be a significant departure from Canada’s approach to advancing energy efficiency and from the intent of the Act. A voluntary approach would result in fewe...

AI summary A voluntary approach to energy efficiency is argued to be less effective than regulatory measures, citing global evidence that Minimum Energy Performance Standards (MEPS) lead to significant energy efficiency improvements and GHG emission reductions. Studies show that countries implementing MEPS have achieved notable energy savings, such as a 32% improvement in Mexico within one year.

dministration Interested parties seeking more details on this analysis can request a copy of the cost­benefit analysis document by contacting the individual named at the end of this document. Methodology, assumptions and data http://www.ga...

AI summary This text discusses the methodology and assumptions used in a cost-benefit analysis of regulatory amendments to the Energy Efficiency Regulations, 2016. The analysis compares a business-as-usual case with a policy case that includes more stringent Minimum Energy Performance Standards (MEPS) across 11 product categories.

its. A 2018 study 20 found that each doubling of production for residential gas furnaces lead to a 5.7% to 8.9% decrease in manufacturing costs. Data collection and sources Data is collected on a product­by­product basis, through market st...

AI summary The text discusses a 2018 study on the relationship between production volume and manufacturing costs for residential gas furnaces, as well as data collection methods for assessing the impact of MEPS amendments. The study found that increased production leads to lower costs, and data is collected on a product-by-product basis for market analysis.

NS Power IR-28 Attachment 2 Page 15 of 44 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 42: Regulations Amending the Energy Efficiency Regulations, 2016 (Amendment 15) stakeholders that it was initiating the development of the Amend...

AI summary Natural Resources Canada engaged stakeholders in the development of the Energy Efficiency Regulations, 2016 (Amendment 15) through targeted communications, webinars, and workshops, incorporating feedback and using the best available data in the cost-benefit analysis.

the costs used in Natural Resources Canada’s economic analysis, with one manufacturer providing supporting data. Natural Resources Canada performed the analysis based on the best data available. Two manufacturers stated that the proposed s...

AI summary The text discusses concerns raised by manufacturers regarding the proposed energy efficiency standards for gas boilers, particularly in existing high-temperature distribution systems. While some argue for a lower efficiency standard of 84% AFUE for replacement installations, Natural Resources Canada maintains that the proposed MEPS is achievable and supported by market data showing consumer preference for condensing boilers.

ommitment that the federal government would set new standards for heating equipment and other key technologies to the highest level of efficiency that is economically and technically achievable. Canada’s Energy and Mines Ministers Conferen...

AI summary The text discusses Canada's collaborative efforts among federal, provincial, and territorial governments to set high energy efficiency standards for heating equipment and other technologies. It highlights the Energy and Mines Ministers Conference and the goal of achieving 90% energy performance for fuel-burning technologies by 2025, aligning with the Canadian Free Trade Agreement.

NS Power IR-28 Attachment 2 Page 21 of 44 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 42: Regulations Amending the Energy Efficiency Regulations, 2016 (Amendment 15) According to the International Energy Agency, policies and progr...

AI summary The document discusses the cost-effectiveness of energy efficiency policies in reducing GHG emissions and highlights the benefits of stricter MEPS regulations. It argues that despite higher initial costs, compliance with these standards will lead to long-term energy savings and monetary benefits for consumers.

he burden on the affected industries, primarily through the use of existing testing standards used by the industry or required by other jurisdictions to assess conformity with the proposed MEPS. Prescribed MEPS are a proven cost­effective...

AI summary The text discusses the implementation and enforcement of energy efficiency regulations, emphasizing the use of Minimum Energy Performance Standards (MEPS) to reduce GHG emissions and energy consumption. It outlines compliance procedures, third-party verification, and the role of Natural Resources Canada in ensuring adherence to these standards.

Lab testing commercial building floor space. Emission factors Businesses using regulated energy­using products save money that can lead to Energy prices increased productivity and competitiveness. Performance will be monitored through a co...

AI summary The text discusses the implementation of energy efficiency regulations, focusing on compliance monitoring, emission factors, and the role of lab testing and third-party verification. It outlines methods for tracking performance and the impact of energy consumption on both GHG emissions and consumer savings. The standards are part of a federal program, and progress is reported in various official documents.

s Amending the Energy Efficiency Regulations, 2016 (Amendment 15) Amendments 1 The heading of Division 4 of Part 2 of the Energy Efficiency Regulations, 2016 31 is replaced by the following: Furnaces, Fireplaces, Unit Heaters and Recovery...

AI summary This document outlines amendments to the Energy Efficiency Regulations, 2016, including changes to the heading of Division 4, definitions of FER, CSA 2.3, and gas furnace, as well as a new definition for gas furnaces in relocatable buildings and an updated limit for gas furnaces under certain manufacturing dates.

by striking out “and” at the end of paragraph (f), by adding “and” at the end of paragraph (g) and by adding the following after paragraph (g): Column 3 Item Information http://www.gazette.gc.ca/rp­pr/p1/2018/2018­10­20/html/reg3­eng.html...

AI summary This text outlines amendments to the Energy Efficiency Regulations, 2016, including the addition of new definitions and requirements for gas fireplaces and furnaces, particularly for relocatable buildings.

(b) its thermal efficiency; after January 1, 2020 (c) its Vr; http://www.gazette.gc.ca/rp­pr/p1/2018/2018­10­20/html/reg3­eng.html 39/44 Date Filed: March 29, 2019 NS Power IR-28 Attachment 2 Page 40 of 44 3/15/2019 Canada Gazette, Part 1,...

AI summary The document outlines amendments to the Energy Efficiency Regulations, 2016, specifically adding definitions related to gas-fired instantaneous water heaters, including thermal efficiency, volume rating (Vr), and maximum flow rate (Vs). These amendments were published in the Canada Gazette and took effect after January 1, 2020.

NS Power IR-28 Attachment 2 Page 42 of 44 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 42: Regulations Amending the Energy Efficiency Regulations, 2016 (Amendment 15) 6 Canada’s 7th National Communication and 3rd Biennial Report (h...

AI summary The document references various regulatory amendments and reports related to energy efficiency, including Canada's 7th National Communication, regulations from British Columbia and Ontario, and an assessment of appliance energy efficiency standards by the International Energy Agency. It also mentions the calculation of avoided damages from GHG emissions and references the U.S. Social Cost of Carbon methodology.

urer engages in with the certification body, e.g. safety certification, energy efficiency verification, as well as the number of products and models the manufacturer has. 17 Marginal fuels represent the last power plant that is needed to m...

AI summary The text discusses energy efficiency verification processes, marginal fuel costs and emissions, discount rates aligned with the Pan-Canadian Framework, and references to studies and regulations related to appliance energy efficiency standards in Canada.

NS Power IR-28 Attachment 3 Page 1 of 45 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 49: Regulations Amending the Energy Efficiency Regulations, 2016 Home (https://www.canada.ca/en.html)  How government works (https://www.canada....

AI summary The document outlines the regulatory impact analysis for amendments to the Energy Efficiency Regulations, 2016, under the Energy Efficiency Act, sponsored by the Department of Natural Resources. It provides an executive summary of the changes and their implications.

tments will provide benefits to Canadians through energy cost savings and improved environmental outcomes, which lead to increased productivity, competitiveness and energy affordability. Since 2011, the United States Department of Energy h...

AI summary The text discusses proposed amendments to Canada's Energy Efficiency Regulations, 2016, aimed at aligning with U.S. regulations and improving energy efficiency standards for residential and commercial products. The goal is to reduce regulatory differences, support cross-border trade, and help achieve Canada's GHG emissions reduction targets.

rgy efficiency of nine residential and commercial product categories, two of which are not currently regulated federally. Specifically, the Amendment is designed to (a) introduce minimum energy http://gazette.gc.ca/rp­pr/p1/2018/2018­12­08...

AI summary The document discusses an amendment to the Energy Efficiency Regulations, 2016, which introduces new energy performance standards and reporting requirements for residential and commercial products. The amendment is expected to reduce GHG emissions by 0.33 megatonnes annually by 2030, with net benefits estimated at $818 million by that year.

manufacturers that are expected to incur incremental costs have been engaged in consultations, but have not raised any compliance issues associated with the size of their respective companies. Domestic and international coordination and co...

AI summary The text discusses the implementation of an amendment to reduce regulatory differences between Canada and the United States, aligning with binational commitments. It also mentions the 1992 Energy Efficiency Act, which established minimum energy performance standards for products sold or leased in Canada.

e and compare the energy use of a given product model relative to others in their category. They are regularly amended to introduce new energy­using products and to update existing requirements. Since most energy­using products must cross...

AI summary Minimum Energy Performance Standards (MEPS) and ENERGY STAR® labelling programs are effective tools for improving energy efficiency and reducing GHG emissions by removing inefficient products from the market and encouraging innovation. These programs are widely adopted and recognized as cost-effective solutions in many countries.

S and labelling programs are among the most cost­effective GHG emissions reduction policies and are the cornerstone of energy efficiency and climate change programs in more than 80 countries. 2 Policy context Canada committed to reduce its...

AI summary Energy efficiency and labelling programs are key GHG reduction strategies, supported by international efforts and Canadian commitments under the Paris Agreement. The Pan-Canadian Framework outlines actions for the building sector, including improving new and existing buildings, supporting Indigenous communities, and enhancing appliance efficiency.

e desired outcomes of the Amendment are as follows: GHG emissions are reduced, contributing to Canada’s goal to reduce GHG emissions by at least 30% below 2005 levels by 2030; Consumers save money by purchasing higher efficiency product mo...

AI summary The Amendment aims to reduce GHG emissions, save consumers and businesses money, and align with North American testing standards by introducing or increasing MEPS for 17 product categories. It was initiated in 2017 and includes new and updated requirements for energy efficiency.

categories; and (c) introduce reporting requirements for one new product category. The Amendment would come into force six months after the date of publication in the Canada Gazette, Part II. http://gazette.gc.ca/rp­pr/p1/2018/2018­12­08/h...

AI summary The document outlines proposed amendments to the Energy Efficiency Regulations, 2016, introducing MEPS, labelling, and reporting requirements for two new product categories: clean water pumps and miscellaneous refrigeration products. The changes aim to align with U.S. standards and apply from January 27, 2020.

apply on that same date in the United States. Performance would be measured in accordance with testing standards aligned with those of the United States. Miscellaneous refrigeration products Miscellaneous refrigeration products (MRPs) are...

AI summary The text outlines amendments to minimum energy performance standards (MEPS) for various refrigeration products and ceiling fans, aligning them with U.S. standards effective from specific dates. It emphasizes performance testing aligned with U.S. practices and the inclusion of new product categories such as residential wine coolers and combination cooler refrigeration products.

ed in Canada. In these cases, the regulatory regimes are different in each country, but do not create a burden for industry, since no energy efficiency requirements need to be satisfied in Canada. Regulatory action Taking regulatory action...

AI summary Regulatory action to increase MEPS for eight product categories would lead to greater GHG emission reductions, align requirements with the United States, and reduce compliance costs. Annual energy consumption reductions are estimated to increase from 0.4 PJ in 2020 to 3.57 PJ in 2030.

) Benefits Energy (gas and Technology Energy electricity) costs savings (PJ) savings Avoided damages Outside air quality, competitiveness, job growth, home comfort, indoor air Installation GHG because of GHG quality, minimizing depressuriz...

AI summary The document outlines a cost-benefit analysis of the new and more stringent MEPS (Minimum Energy Performance Standards) by Natural Resources Canada. It compares a business-as-usual case (excluding the Amendment) with a policy case (including the Amendment) to assess economic gains and societal impacts.

cenarios: the business­as­usual case (i.e. excluding the Amendment); and the policy case (i.e. the business­as­usual case including the Amendment). Business­as­usual case For the purpose of this analysis, the business­as­usual case was def...

AI summary The analysis compares a business-as-usual scenario with a policy case that includes new and more stringent Minimum Energy Performance Standards (MEPS) across eight product categories. Benchmarks are based on models that do not meet the new standards, and social cost of carbon is considered in the evaluation.

ow for a more precise stakeholder estimate and has decided, for the purpose of this calculation, to apply estimates of incremental burden to all 697 stakeholders. Submitting import reports http://gazette.gc.ca/rp­pr/p1/2018/2018­12­08/html...

AI summary The text discusses the introduction of new import reporting requirements for energy-using products under the Energy Efficiency Regulations, 2016. It estimates the administrative burden on importers, identifying 62 affected importers and 2,082 annual transactions, with an assumed wage rate of $30 for clerical staff.

access to a larger audience of stakeholders. Natural Resources Canada also has ongoing activities that provide additional opportunities to gather feedback from stakeholders and to inform them. Energy Efficiency Regulations web page (http:/...

AI summary Natural Resources Canada engages stakeholders through various channels, including the Energy Efficiency Regulations web page, bilateral discussions with industry associations, and input from Canadian Standards Association committees. Market studies and product-specific feedback were also considered in the development of the Amendment.

NS Power IR-28 Attachment 3 Page 15 of 45 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 49: Regulations Amending the Energy Efficiency Regulations, 2016 Ceiling fans One industry association and three manufacturers raised the issue...

AI summary The document discusses amendments to the Energy Efficiency Regulations, 2016, focusing on ceiling fans and miscellaneous refrigeration products. Industry stakeholders raised concerns about testing standards and labelling requirements, with Natural Resources Canada proposing the adoption of U.S. standards for improved stability and consistency.

consumption; and (e) phase of electric current. http://gazette.gc.ca/rp­pr/p1/2018/2018­12­08/html/reg3­eng.html 25/45 Date Filed: March 29, 2019 NS Power IR-28 Attachment 3 Page 26 of 45 3/15/2019 Canada Gazette, Part 1, Volume 152, Numbe...

AI summary The text outlines requirements for single package central air conditioners, specifying that those manufactured on or after January 1, 2017, must comply with CSA C656-14 standards. It includes details such as product classification, cooling capacity, seasonal energy efficiency ratio, and phase of electric current.

NS Power IR-28 Attachment 3 Page 34 of 45 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 49: Regulations Amending the Energy Efficiency Regulations, 2016

AI summary The document references a regulation amendment to the Energy Efficiency Regulations, 2016, published in the Canada Gazette, Part 1, Volume 152, Number 49 on March 15, 2019.

NS Power IR-28 Attachment 3 Page 35 of 45 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 49: Regulations Amending the Energy Efficiency Regulations, 2016 Single package vertical heat pumps that have a cooling capacity of Energy effic...

AI summary The document outlines energy efficiency requirements for single package vertical heat pumps with varying cooling capacities, specifying minimum energy efficiency ratios and heating coefficients of performance. It also references the replacement of a portion of section 210 of the Regulations, requiring information collection in accordance with CSA C746-17.

(f) the percentage of the surface area on the front side that is transparent. http://gazette.gc.ca/rp­pr/p1/2018/2018­12­08/html/reg3­eng.html 38/45 Date Filed: March 29, 2019 NS Power IR-28 Attachment 3 Page 39 of 45 3/15/2019 Canada Gaze...

AI summary This text amends regulations related to energy efficiency, specifically updating definitions and criteria for energy-using products such as snack and refrigerated beverage vending machines and walk-in refrigeration systems. The amendments include a date range for the manufacture of vending machines and revised definitions for refrigeration systems.

NS Power IR-28 Attachment 3 Page 41 of 45 3/15/2019 Canada Gazette, Part 1, Volume 152, Number 49: Regulations Amending the Energy Efficiency Regulations, 2016 (e) if it is a walk­in freezer unit cooler or dedicated condensing refrigeratio...

AI summary The document outlines amendments to the Energy Efficiency Regulations, 2016, focusing on definitions and standards for clean water pumps, including references to 10 C.F.R. Appendix A and 10 C.F.R. §431.465(b)(4). It provides detailed specifications for clean water and its pumping systems.

Attachment 1, Page 15 of 30 Recommendation Text Source Status Comments Expected Period of Completion Include some Amendment 13 standards in the 2018 evaluation. The new standards set forth in Amendment 13 came into force at the end of June...

AI summary The 2018 evaluation report includes Amendment 13 standards, with a focus on products like clothes washers and lighting due to their significant savings potential. Refrigerators under Amendment 13 are excluded due to low savings. The evaluation also continues to assess lighting, street-lighting, and building codes.

Program Bibliographic References NATURAL RESOURCES CANADA. General service incandescent reflector lamps, 2018, available at https://www.nrcan.gc.ca/energy/regulations-codes-standards/products/6957 (Last accessed February 6, 2019). NATURAL...

AI summary The text includes references to various documents and reports related to energy efficiency regulations and market analysis, particularly focusing on incandescent reflector lamps and energy use in commercial and institutional buildings.

Codes and Standards The ultimate indicator of market transformation is the adoption of more stringent codes and standards. Currently, general-use lamps16 are required to meet an efficiency level that corresponds to halogen incandescent bul...

AI summary The text discusses the evolution of lighting efficiency standards in Canada, highlighting the current minimum energy performance standards for general-use lamps and the potential future shift to LED technology as the base case under updated regulations. It notes that current regulations do not yet make LED lamps the base case, but this is expected within three to five years.

Context and Background To improve the efficiency of energy-consuming products marketed in Canada, Natural Resources Canada (NRCan) has been implementing regulations regarding minimum energy efficiency standards (MEPS) by issuing a series o...

AI summary Natural Resources Canada (NRCan) has implemented minimum energy efficiency standards (MEPS) through amendments to the Energy Efficiency Regulations as part of Canada's Clean Air Regulatory Agenda. Nova Scotia also adopted similar regulations, including LED lighting for roads and the Nova Scotia Building Code. Efficiency Nova Scotia (ENS) commissioned an evaluation of the energy and peak demand savings from these regulations in 2018.

Table 1: Product Categories and Codes Impacted by Recent Changes to Energy Efficiency Regulations Enforced in Nova Scotia Product Category Existing MEPS Before Initiative Regulation Source Reference Standard Incandescent Lamps (75 W and 10...

AI summary Table 1 outlines product categories and codes impacted by recent changes to energy efficiency regulations in Nova Scotia, including MEPS requirements, regulation sources, and reference standards for various lighting and building products.

1 CONTEXT AND BACKGROUND To improve the efficiency of energy-consuming products marketed in Canada, Natural Resources Canada (NRCan) has been implementing regulations regarding minimum energy efficiency standards (MEPS) by issuing a series...

AI summary This section outlines the implementation of minimum energy performance standards (MEPS) in Canada and Nova Scotia, including amendments to the Energy Efficiency Regulations and their impact on product categories such as lighting and appliances. Efficiency Nova Scotia evaluated these regulations from 2012 to 2018, with the 2018 evaluation focusing on additional products covered by Amendment 13.

Table 3: Product Categories and Codes Impacted by Recent Changes to Energy Efficiency Regulations Enforced in Nova Scotia Product Category Existing MEPS Before Initiative Regulation Source Reference Standard Incandescent Lamps (75 W and 10...

AI summary This table lists product categories and their corresponding energy efficiency regulations in Nova Scotia, highlighting changes to minimum energy performance standards (MEPS) and referencing applicable standards and regulations.

3.1.3 Market Size Estimate EFC provided information about lighting product shipments to Atlantic Canada from 2004 to the end of 2018, and this information was converted into estimates for Nova Scotia. Of note, 2013 was the last year of shi...

AI summary EFC provided data on lighting product shipments to Atlantic Canada from 2004 to 2018, which was used to estimate Nova Scotia's market size if energy efficiency standards had not been implemented. The Evaluator used 2013 as the baseline year and applied a -5.56% annual decline to project 2018 market size. The data also included estimated wattage distribution of lamps sold.

3.5.2 Regulation Description Amendment 13 to the Energy Efficiency Regulations was registered on December 9, 2016, published on December 28, 2016 and came into force on June 28, 2017. General-service incandescent reflector lamps were inclu...

AI summary Amendment 13 to the Energy Efficiency Regulations was implemented in 2017, aligning Canadian standards with U.S. requirements. It sets energy performance standards for general-service incandescent reflector lamps, categorizing them based on power range, type, size, and voltage, with minimum light efficiency ratings applied.

3.6.2 Regulation Description Amendment 13 to the Energy Efficiency Regulations included general-service fluorescent lamps to align energy efficiency requirements to those in force in the United States. The Canadian regulations were introdu...

AI summary Amendment 13 to the Energy Efficiency Regulations added general-service fluorescent lamps to align with U.S. standards. Tier I regulations, effective in 2016, required a 20% increase in efficiency and were applied based on product specifications. The 2018 evaluation focused on the impact of Tier I regulations, as Tier II regulations, effective in 2018, would have a delayed market impact starting in 2019.

3.7.2 Regulation Description Amendment 13 to the Energy Efficiency Regulations included fluorescent lamp ballasts to align energy efficiency requirements to those in force in the United States. The regulation is detailed in the Canadian St...

AI summary Amendment 13 to the Energy Efficiency Regulations updated fluorescent lamp ballast standards to align with U.S. requirements, raising minimum energy performance standards (MEPS) and introducing a new method for measuring ballast efficacy that reduces errors and equipment needs.