N-1Application
8 passages
1.6.1 Functional Entities (Responsible Entities) - Reliability Coordinator - Balancing Authorities - Transmission Operators
AI summary This section outlines the functional entities responsible for reliability and system operations in the electricity sector, including Reliability Coordinators and Balancing Authorities.
3. NERC ERO Reliability Standard Requirements The NERC ERO Reliability Standards contain Requirements that are associated with this Directory include, but may not be limited to: - BAL-002: Disturbance Control Standard Contingency Reserve f...
AI summary This section outlines several NERC ERO Reliability Standards, including BAL-002, BAL-003, BAL-005, EOP-011, IRO-009, TOP-001, and TOP-002, which relate to disturbance control, frequency response, balancing authority control, emergency operations, reliability coordinator actions, and transmission operations planning.
4. NPCC Regional Reliability Standard Requirements NPCC Regional Reliability Standards, Directory, Criteria Requirements that are associated with this Directory include, but may not be limited to: • PRC-006-NPCC : Automatic Underfrequency...
AI summary The document outlines the NPCC Regional Reliability Standard PRC-006-NPCC, which pertains to Automatic Underfrequency Load Shedding. This standard is part of a broader set of reliability criteria managed by the Northeast Power Coordinating Council.
3.2 Correction of Abnormal Voltage Conditions Abnormal voltage conditions in a Transmission Operator area can be caused by changes within the Transmission Operating area or external Transmission Operator areas, or by changes in load-genera...
AI summary This section outlines procedures for correcting abnormal voltage conditions in a Transmission Operator area. It emphasizes identifying root causes and implementing corrective actions, including load shedding and coordination with adjacent areas, depending on the nature and urgency of the voltage issue.
4.1 Correction of Transmission Loading if Exceeding Limits When a Transmission Operator area is experiencing internal circuit or tie line loading in excess of applicable system operating limits, the following actions should be implemented...
AI summary This section outlines the procedures to be followed when transmission loading exceeds system operating limits, including adjusting generation, transferring load, utilizing NERC TLR processes, and implementing emergency transfer capabilities to ensure system reliability and compliance with operating standards.
5.1.4 Use of Alternative Balancing Authority Control Mode Balancing Authority areas connected synchronously to the Eastern Interconnection should develop alternative AGC operation strategies to address the concerns of 5.1.2 and 5.1.3 above...
AI summary The text discusses the need for Balancing Authority areas connected to the Eastern Interconnection to develop alternative AGC operation strategies to address specific concerns outlined in previous sections.
3.0 NERC ERO Reliability Standard Requirements The NERC ERO Reliability Standards containing requirements associated with this Directory, but not necessarily enforceable in all NPCC areas include, but may not be limited to: - [BAL-002-](ft...
AI summary This section outlines the NERC ERO Reliability Standard Requirements and NPCC Regional Reliability Standard Requirements, including specific standards such as BAL-002-2, BAL-003-1.1, and PRC-006-NPCC, which pertain to disturbance control, frequency response, and automatic underfrequency load shedding.
lems are most effectively corrected by control actions as close to the source as possible, the Transmission Operator should use its own resources, but may request assistance from adjacent Transmission Operator areas. Provided below is a gu...
AI summary The document outlines a step-by-step guide for Transmission Operators to address abnormal bulk power system voltage conditions, starting with local control actions and escalating to requests for assistance from adjacent operators and Balancing Authorities if needed.