N-3-(b)Redacted NSPI Response to UARB IR-12 (att 7-10) to IR-17
13 passages
4.6.10 Safety Issues Lands within the Study Area could present safety issues ( e.g., steep cliffs). Construction and decommissioning activities associated with the wind farm may present some safety challenges with respect to these hazards...
AI summary The text outlines safety concerns related to a wind farm project, including hazards from steep terrain during construction, decommissioning, and operational phases like ice throw. Mitigation measures such as setbacks, restricted access, and public notification are proposed to address these risks.
Table 5.10 Summary of Potential Effects of Operational Activities Table 3.10 Summary of Potential ui / (( 7.111100 Signi ifican Adver ce Cri teria ect 1 for Potential Interaction Potential Effect Mitigation Geographic Extent Magnitude Dura...
AI summary The table outlines potential effects of operational activities, including infrasound energy and ice throw, and their mitigation measures. It discusses the geographic extent, magnitude, and duration of these effects, as well as their reversibility and ecological context. The analysis concludes that the effects are unlikely to pose significant risks to human health and safety.
5.2.1.8 Health and Safety Issues Safety issues are typically associated with construction and decommissioning activities associated with the wind farm. However, safety issues must also be considered as they pertain to the operational phase...
AI summary The section discusses health and safety concerns related to wind farm operations, including shadow flicker, electromagnetic fields (EMFs), ice throw, and infrasound. It emphasizes the need to address these issues during construction, decommissioning, and public interaction phases, referencing public concerns raised in other Canadian projects.
Electromagnetic Fields Electromagnetic fields (EMFs) created by the operating wind farm will be localized and become weaker with distance. The strength of the EMF from equipment within the substation, such as transformers, decreases rapidl...
AI summary Electromagnetic fields (EMFs) from the wind farm and substation equipment are localized, weaken with distance, and are typically indistinguishable from background levels. They are weaker than household appliance EMFs, with no evidence of human health effects from the proposed project.
Health and Safety Health and safety issues typically associated with construction and operational activities are a priority for SkyPower. During construction and operation activities, access to the wind turbine facility will be restricted...
AI summary SkyPower prioritizes health and safety during construction and operation of its wind turbine project, implementing measures such as restricted access, personal protective equipment, and safety training. A safety manual is required, and no residual effects are anticipated with these mitigation measures.
GIS Data Management/Environmental Analysis Viewshed Analysis and 3D Rendering, 2008, Sydney, NS (3D Modeling, Cartography, Reporting) Compilation of proposed port infrastructure for viewshed analysis of surrounding area. Design of 3D rende...
AI summary The text describes various GIS-related projects, including viewshed analysis, geodatabase development, and environmental assessments conducted in multiple regions such as Nova Scotia, Newfoundland, and the Canadian Beaufort Sea. These projects involve data compilation, mapping, and environmental modeling for infrastructure planning and hazard assessment.
The Owner is committed to working with safe contractors. Toward that end, the Owner will rate Tenderers on certain safety criteria. Before the Tenderer or the Tenderer's subcontractor, is allowed to work, safety performance will be reviewe...
AI summary The Owner emphasizes the importance of working with safe contractors and requires that all Tenderers and subcontractors be registered and in good standing with the Workers' Compensation Board of Nova Scotia. Safety performance will be reviewed before allowing work to commence.
18. Safety .1 Observe construction safety measures of Provincial Government, including but not limited to the Occupational Health and Safety Act, Workers' Compensation Board and Municipal authority provided that in any case of conflict or...
AI summary The text outlines safety and environmental requirements for construction activities, emphasizing compliance with provincial regulations such as the Occupational Health and Safety Act and WHMIS. It also requires submission of detailed plans to the Engineer and adherence to pollution control measures.
approved paint system. SkyPower Corporation Digby Wind Power Project Contract 090630.00 Metal Fabrications Section 05 50 00 Page 5 June 2009 2.6 FRAMES AND SUPPORTS .1 Fabricate by saw cutting, welding and/or bolting form structural steel,...
AI summary The document outlines specifications for the fabrication and erection of metal structures for the Digby Wind Power Project, including requirements for cutting, welding, and painting, as well as compliance with health and safety regulations and standards.
1.5 SUBMITTALS .4 Submit material safety data sheets provided with (Cont'd) product delivered to job site. - 2.1 MATERIALS .1 Firestopping and smoke seal systems: in accordance with ULC-S115. - .1 Asbestos-free materials and systems capabl...
AI summary The text outlines specifications for materials and firestopping systems, including compliance with ULC-S115, asbestos-free requirements, and acceptable manufacturers such as Hilti Canada Corporation and 3M.
3.3 ADDITIONAL .1 Overview: WORKS .1 General - - .1 In general, provide electrical services in the testing and commissioning of the Wind Turbine Generators in accordance with Section 01 91 13 - General Commissioning (Cx) Requirements and S...
AI summary This section outlines the general requirements for providing electrical services during the testing and commissioning of wind turbine generators, including compliance with provincial standards, health and safety regulations, and CSA standards such as the Canadian Electrical Code.
- .3 Z462-08 Workplace Electrical Safety SkyPower Corporation Wind Turbine Generators Section 26 32 23 Digby Wind Power Project Page 5 Contract 090630.00 June 2009 WORKS .3 Equipment
AI summary The document discusses the 'Workplace Electrical Safety' standard Z462-08, specifically in the context of the Digby Wind Power Project, involving SkyPower Corporation and Wind Turbine Generators. It references a contract dated June 2009.
3.3 Safety Labels - 3.3.1 All external doors and hinged bolted panels providing access to energized equipment shall be provided with "Caution—High Voltage—Keep Out" signs. - 3.3.2 Labels indicating "Warning—Arc Flash and Shock Hazard—Appro...
AI summary This section outlines safety labeling requirements for equipment with high voltage and arc flash hazards, specifying the need for caution and warning signs suitable for outdoor installation.