N-3-(b)Redacted NSPI Response to UARB IR-12 (att 7-10) to IR-17
29 passages
Table 4.2 Summary of Water Quality and Channel Characteristic for Site WC-1 Crossing 1 Location (NAD83, Z20T) Wetted Width (m) Bankfull Width (m) Average Depth (m) Maximum Depth (m) Temp. (°C) рН D.O. (mg/L) D.O. (%) Conductivity (µs/cm) W...
AI summary Table 4.2 summarizes water quality and channel characteristics for Site WC-1, including measurements such as temperature, pH, dissolved oxygen, and conductivity, as well as dimensions like wetted width and depth. These data were collected at the Right of Way of the anticipated road crossing.
Table 4.3 Summary of Water Quality and Channel Characteristic for Site WC-2 Crossing 1 Location (NAD83, Z20T) Wetted Width (m) Bankfull Width (m) Average Depth (m) Maximum Depth (m) Temp. (°C) рН D.O. (mg/L) D.O. (%) Conductivity (µs/cm) W...
AI summary Table 4.3 presents water quality and channel characteristics for Site WC-2, including measurements such as wetted width, depth, temperature, pH, and dissolved oxygen. These measurements were taken at the Right of Way of the anticipated road crossing.
Table 5.4 Potential Effects of Road Construction/Modification Sign ificar Adve nce Cr rse Ef iteria fect 1 a for Potential Interaction Potential Effect Mitigation Geographic Extent Magnitude Duration/ Frequency Reversibility Ecological Con...
AI summary The table outlines potential environmental effects of road construction and modification, including sensory disturbance, habitat loss, bird mortality, soil erosion, and compaction. Mitigation strategies are provided, such as limiting disturbance to designated workspaces, compliance with the Migratory Birds Convention Act, and minimizing the size of access roads. The impacts are generally considered temporary or minimal.
Table D1 Wetlands Found in the Project Area Wetland Identification # LSB TB CTS MTS DTS TSS LSS FM BM SM SWW Approx. Wetland Size (ha) 19 X 0.16 20 X 0.15 27 X 29.16 56 X 1.10 77 X 0.07 79 X 0.56 12 X 1.10 57 X 1.11 15 X 0.04 24 X 0.41 74...
AI summary Table D1 lists wetlands identified in the project area, including their identification numbers and approximate sizes in hectares. The table includes multiple entries with varying sizes, ranging from 0.04 to 29.16 hectares.
5.0 SUMMARY OF MONITORING EFFORT A total of 126 to 140 hours will be spent monitoring bird use, during the pre-construction phase in 2008 as shown in Table 1.
AI summary The monitoring effort during the pre-construction phase in 2008 will involve between 126 to 140 hours spent monitoring bird use, as outlined in Table 1.
\ \ Average wind speed and direction during 4-hour survey \ \ \ Refer to Figure E1 for Point Count survey locations; area searches were conducted throughout the Project Area.
AI summary The text references an average wind speed and direction during a 4-hour survey and mentions that Point Count survey locations can be found in Figure E1, with area searches conducted throughout the Project Area.
WHITE - APPLICATION cipality A Municipality And Town of Digby DATE REC'D DATE REC'D BY 652.50 COPY NENTS A PE DATE REC'D EST. VALUE /50, 1000 RECEIPT No. S OCCUPANCY PERMIT FOUND CONCRETE / SIZE OTHER CONCRETE THICKNESS BLOCK SIZE FRAMING...
AI summary This document appears to be a building permit application submitted to the Municipality and Town of Digby, Nova Scotia. It includes details such as the applicant, location, type of construction, and various building specifications.
Municipality And Town of Digby P.O. Box 429, Digby, N.S. B0V 1A0 Phone: 245-6776 APPLICATION FOR PRUILDING PERMIT DEMOLITION NAME / LL OA / OLLIES S COT CITY OF S POSTAL CODE PHONE Scotian Windfields Partners Corp. Same as above 8 USE TYPE...
AI summary The document contains an application for a building permit related to demolition, submitted by Scotian Windfields Partners Corp. in the Municipality and Town of Digby, Nova Scotia. The application includes details such as the type of construction, use type, and other relevant information.
We currently have two parcels of land totally 529 acres under Option to Lease agreements as depicted on the map below. We are including copies of the Option to Lease Agreements with property maps of each parcel and land along with ownershi...
AI summary The document references two parcels of land totaling 529 acres under Option to Lease agreements, along with electrical specifications and a document reference. It includes property maps and ownership information from the Nova Scotia Government Property on Line System.
Part 1, section 3 of the Radiocommunication Regulations outlines the radiocommunication services and stations for which radio licences can be issued. Services Fee Schedules Type of Stations (i) Aeronautical service Schedule III, Part I, It...
AI summary Part 1, section 3 of the Radiocommunication Regulations outlines the radiocommunication services and stations for which radio licences can be issued, along with associated fee schedules and station types.
Indicate Tenderer's Workers' Compensation registration number a. Number of injury related fatalities: .2 do and fulfill everything indicated by this Agreement, and .3 commence the Work by the Engineer by the day of day of in the year and a...
AI summary The document contains a table and text related to a tender agreement, including provisions about the commencement of work and the certification of substantial performance. It also references the need to indicate a Workers' Compensation registration number.
- 2.1 MATERIALS .1 Hot rolled carbon steel sections and plates: to CAN/CSA-G40.20/G40.21, Grade 350W (Fy = 350 MPa) or alternatively ASTM A992 (Fy = 345 MPa) for wide flange shapes and Grade 300W (Fy = 300 MPa) for channels, plates and ang...
AI summary The document outlines specific material standards for structural and construction components, including hot rolled steel, welding materials, bolts, stainless steel, adhesive and expansion anchors, and WTG anchors. Specifications reference various standards such as CSA, ASTM, and manufacturer guidelines for installation.
- .3 Cope accurately and securely weld butt joints of mullions, transom bars, centre rails and sills. SkyPower Corporation Digby Wind Power Project Contract 090630.00 Metal Doors and Frames Section 08 11 14 Page 8 June 2009 .7 Provide fact...
AI summary The text outlines specifications for welding and coating metal components in the Digby Wind Power Project, including requirements for primer application, fire labeling, and steel construction standards.
1.5 SHIPPING .1 General - .1 Prior to shipment, the following values shall be tested and recorded: - .1 Ambient temperature in °C. - .2 SF6 Gas Pressure in PSI (as applicable). - .2 Responsibility for delivery shall belong to the Contracto...
AI summary The document outlines requirements for shipping electrical equipment, including testing ambient temperature and SF6 gas pressure prior to shipment, and specifies that the Contractor is responsible for all delivery costs from the factory to the Place of Installation in Digby County, Nova Scotia.
- on the size, weight, point of origin, and materials of the final product): - .4 Canada Border Services Agency. - .5 Transport Canada. - .6 Nova Scotia Department of Transportation and Infrastructure Renewal. - .7 Following delivery to th...
AI summary The text outlines responsibilities and procedures related to the delivery, testing, and documentation of circuit breakers, including ambient temperature recording, SF6 gas pressure checks, and visual inspections. It specifies the roles of the Vendor, Contractor, and Engineer in ensuring compliance with these requirements.
- - - .3 Nova Scotia Workers' Compensation Act. - .4 CSA Standards - .1 C22.1-06, Canadian Electrical Code Part I - .2 C22.3, Canadian Electrical Code Part III - .3 Z462-08, Workplace Electrical Safety - .5 ANSI/IEEE Standards - .1 C37.34,...
AI summary The text outlines regulatory standards related to electrical safety and equipment testing, referencing the Nova Scotia Workers' Compensation Act and various CSA and ANSI/IEEE standards. It also specifies that the Contractor is responsible for providing necessary test equipment.
COMMISSIONING FORMS Date Office Title: + D Date Office Title: BCL Date 30/09 Office Hfx Title: CBCL 06/3 Des 30/09 signed Hfx Drawn 0 ISSUED FO R TENDER R FINAL REVIEW 06/30/09 06/3 Des 30/09 Hfx Title: F ote ntial Di Tra roject er Fi t 10...
AI summary The document outlines commissioning forms used in a regulatory proceeding, including details such as dates, offices, project names, and inspection data. It contains technical specifications and standards related to materials and construction.
BILL OF MATERIALS (TABLE E9008-2) ITEM QTY. DESCRIPTION STD. OF ACCEPTANCE H6c as regid LOCKNUT (PALNUT), HOT-DIPPED GALVANIZED, 5/8" THREAD DIA. TO MATCH ASSOCIATED BOLT CHANCE 3532 H12 as req'd BOLT, MACHINE, HOT-DIPPED GALVANIZED, SQUAR...
AI summary The document contains a bill of materials for a project related to SkyPower Corp's Digby Wind project, listing various components such as bolts, locknuts, guy hooks, and guy wires with specific standards and specifications, including references to Canadian Standards Association (CSA) standards.
- 5. COMMUNICATIONS WIRING SHALL BE SECURED TO THE POLE AT 1m BELOW THE SYSTEM NEUTRAL/GROUND WIRE. C2b 2 CROSSARM, DOUGLAS FIR, CLASS '1' AS PER CSA STD. 0116, 6 PIN, 95mm x 120mm x 2440mm, DRILLED BEFORE TREATMENT c/w HOLES FOR 1550mm LO...
AI summary The text outlines specific requirements for securing communications wiring to poles and provides detailed specifications for crossarms, bolts, washers, and other hardware, all in accordance with various Canadian Standards Association (CSA) standards and NSPI standards.
- 4. COMMUNICATIONS WIRING SHALL BE SECURED TO THE POLE AT 1m BELOW THE SYSTEM NEUTRAL/GROUND WIRE. BILL OF MATERIALS (TABLE E9216-1) Н6с 2 LOCKNUT (PALNUT), HOT-DIPPED GALVANIZED, 5/8" THREAD DIA. TO MATCH ASSOCIATED BOLT CHANCE 3532 H11...
AI summary The document outlines specifications for securing communications wiring to poles, including a bill of materials with detailed components and standards such as CSA and ISO. It lists items like bolts, washers, and connectors, along with their specifications and manufacturers.
BILL OF MATERIALS Date Office Title: C4 CROSSARM, FIBREGLASS, HEAVY-DUTY DEADEND, TO MATCH CLASS '1' AS PER CSA STD. 0116, 10 PRE-DRILLED HOLES, 102mm x 152mm x 3658mm c/w ALL POLE MOUNTING HARDWARE PY12SD349-2E-SM MACLEAN POWER SYSTEMS F1...
AI summary The document provides a detailed list of materials required for a project, including specifications for crossarms and fuse links. It includes details such as standards, dimensions, and acceptable manufacturers.
Proprietary Restriction Notice The intellectual content of this document is the property of CBCL Limited, furnished for the use of SkyPower Corp. in the Digby Wind Power Project, CBCL Project number 090630.00, and shall not be reproduced,...
AI summary This document is a proprietary restriction notice issued by CBCL Limited for the Digby Wind Power Project. It outlines that the document's content is the property of CBCL Limited and cannot be reproduced or disclosed without prior consent. The notice also states that CBCL Limited is not responsible for any damages resulting from third-party use of the document.
Thanks are due to the Consulting Engineers Association of Nova Scotia and to the Nova Scotia Road Builders Association for their support and endorsement of this document. STANDARD SPECIFICATIONS Topsoiling and Finish Grading 32 91 19 JAN 2...
AI summary The text acknowledges the support of the Consulting Engineers Association of Nova Scotia and the Nova Scotia Road Builders Association for the document. It lists standard specifications and details for various infrastructure projects, including road construction, sewer systems, and gas distribution, with dates and page numbers.
Please refer to hard copy of Section 00 72 45. END STANDARD SPECIFICATIONS SUPPLEMENTARY SECTION 00 73 00 FOR GENERAL CONDITIONS PAGE 1 MUNICIPAL SERVICES JANUARY 2009 These Supplementary General Conditions amend Section 00 71 00 DEFINITIO...
AI summary This document refers to a hard copy of Section 00 72 45 and outlines the amendment of Section 00 71 00 DEFINITIONS and Section 00 72 45 - GENERAL CONDITIONS by the Supplementary General Conditions in Section 00 73 00.
- 1. Reference Documents - 2. Disposal of Wastes - 3. Drainage - 4. Work in or Adjacent to Watercourses - 5. Pollution Control
AI summary The text outlines five key sections related to regulatory matters: reference documents, waste disposal, drainage, work near watercourses, and pollution control. These sections likely provide guidelines or regulations for managing environmental and infrastructure-related activities.
- 3.9 Closed Circuit Television Inspection STANDARD SPECIFICATIONS FOR MUNICIPAL SERVICES SANITARY SEWERS SECTION 33 31 00 PAGE 1 JANUARY 2009 FOR SANITARY SEWERS PAGE 2 MUNICIPAL SERVICES JANUARY 2009 PART 2 - PRODUCTS 2.1 General .1 Diam...
AI summary This section outlines the standard specifications for municipal services, focusing on sanitary sewers. It includes details on materials, standards, and construction practices for pipes, fittings, service saddles, marker stakes, and grout, as specified in various standards such as ASTM and CAN/CSA.
- .5 Motor shall have a 1.15 service factor and shall be operable at the service factor load continuously without exceeding the insulation rated temperature rise at 40°C ambient. FOR MUNICIPAL SERVICES STATION PAGE 5 JANUARY 2009 .6 Motor...
AI summary The text outlines technical specifications for motors and piping systems, including service factor requirements, bearing standards, and material compliance with various industry standards such as AWWA and ANSI. These specifications are part of a municipal services document from January 2009.
.3 Inspection: - .1 Perform inspection of pipe from manhole to manhole by passing TV camera through sewer in direction of flow. - .2 Classify results in accordance with North American Pipeline Inspectors (NAAPI) and WRc Standard.
AI summary The inspection process involves using a TV camera to inspect pipes between manholes and classifying results according to NAAPI and WRc standards.
- 6. DIMENSIONS GIVEN ARE FOR PAYMENT PURPOSES ONLY. ACTUAL CONSTRUCTION WIDTHS SHALL BE IN ACCORDANCE WITH THE REGULATIONS AND THE REQUIREMENTS OF THE DEPARTMENTS OF ENVIRONMENT AND LABOUR. PIPE SIZE DIMENSIONS NOM. DIA. В С UP TO 375 300...
AI summary The text provides dimensional guidelines for payment purposes, specifying that actual construction widths must follow regulations and requirements from the Departments of Environment and Labour. A table outlines pipe size dimensions, and additional payment details for trench work are mentioned.