N-1Application
4 passages
FIRST-YEAR REPORTING ON THE PROJECT'S COSTS AND AIR EMISSIONS REDUCTIONS Within three months following the first anniversary date of Commissioned Date of the Project, the Proponent must provide a report containing the following: - a) Infor...
AI summary The Proponent must report final project costs, 20-year O&M cost estimates using a provided spreadsheet, and annual GHG/air contaminant emissions reductions for the ecoENERGY portion of the power plant, measured in MWh/yr, within three months of the project's first anniversary.
11 OPERATION AND MAINTENANCE, RECORDS & METERS - (a) The Seller shall, throughout the Term, operate. maintain and rehabilitate (or cause to operate. maintain and rehabilitate) the Facility in a manner consistent with the Certification, usi...
AI summary The Seller is obligated to operate, maintain, and rehabilitate the Facility using Good Utility Practice, comply with laws, and restrict energy generation to the specified Energy Source. Both the Seller and NSPI must maintain accurate records for PPA administration, including production incentives and payments.
10.5 Operating and Maintenanc(,l Expenses Subject to the provisions herein addressing the use of facilities by others, and except for operations and maintenance expenses associated with modifications made for providing interconnection or t...
AI summary The Interconnection Customer is responsible for operating and maintenance expenses related to their own facilities and the Transmission Provider's facilities, except when third-party modifications are made and paid for by the third party.
15.4 Operations and Maintenance Notice Each Party shall notify the other Party in writing of the identity of the person(s) that it designates as the point(s) of contact with respect to the implementation of Articles 9 and 10.
AI summary Section 15.4 mandates that each party notify the other in writing of designated points of contact for implementing Articles 9 and 10, establishing procedural requirements for operations and maintenance coordination.
N-2Redacted NSPI Response to CA IRs
6 passages
11 Total T&D (COPS) Overtime Labour = $29,703
AI summary The document provides a line item for Total T&D (COPS) Overtime Labour, amounting to $29,703, indicating a specific cost associated with overtime work in transmission and distribution operations.
DETERMINATION OF ELIGIBLE OVERHEAD EXPENSES 07 The next step is the identification of operating expenses that will benefit construction or development activities. A separate determination is made for each division. The process relies on bu...
AI summary The process involves identifying operating expenses benefiting construction or development activities, with separate determinations for each division. Budgeted expense figures are used to establish the overhead application rate for each fiscal year prior to its commencement.
08 Customer Operations Division The nature of operating expenses in the Customer Service Division is primarily identified by the activity segment of the accounting flex field . 2 The budgeted expenses for all eligible activities are accumu...
AI summary The Customer Service Division's operating expenses are determined through the activity segment of the accounting flex field, with budgeted expenses for eligible activities aggregated to calculate the divisional total.
DETERMINATION OF ELIGIBLE OVERHEAD EXPENSES 06 The next step is the identification of operating expenses that will benefit construction or development activities. A separate determination is made for each division. The process relies on bu...
AI summary The process involves identifying operating expenses benefiting construction/development activities, with separate determinations for each division. Budgeted expense figures are used to establish overhead application rates before the fiscal year begins, ensuring pre-commencement rate determination.
07 Customer Operations Division The nature of operating expenses in the Customer Operations Division is primarily identified by the activity segment of the accounting flex field. 2 The budgeted expenses for all eligible activities are accu...
AI summary The Customer Operations Division's operating expenses are categorized via the accounting flex field's activity segment, with head office rent allocated separately. Vehicle Overhead rates are calculated per vehicle class, and Customer Operations is the only NSPI division applying a separate A/O rate for vehicle expenses.
APPLICATION OF ADMINISTRATIVE AND VEHICLE OVERHEAD (SELF - CONSTRUCTED ASSETS) - 6230 overhead expenses determined above based on capital labour to total labour for both administrative and vehicle overheads.
AI summary The document discusses the methodology for determining overhead expenses, specifically using the ratio of capital labour to total labour for both administrative and vehicle overheads in self-constructed assets.
N-3-(b)Redacted NSPI Response to UARB IR-12 (att 7-10) to IR-17
14 passages
- 2.1 MATERIALS .1 Primers: type recommended by sealant manufacturer. - .2 Joint fillers: - .1 General: compatible with primers and sealants, outsized 30 to 50%. - .2 Polyethylene, urethane, neoprene or vinyl: extruded closed cell foam, Sh...
AI summary The document outlines material specifications for primers, joint fillers, bond breakers, and sealants, including acceptable products and standards they must meet. It details requirements for interior and exterior applications, movement ranges, and compatibility with other materials.
1.1 SUMMARY .1 Section Includes: .1 This Section covers items common to Sections of Division 26. This section supplements requirements of Division 1, Division 23, Division 27 and Division 33. - 1.2 REFERENCES .1 Codes and standards referen...
AI summary This section outlines general requirements for the operation, care, and maintenance of systems and equipment. It includes instructions for operating personnel, safety precautions, and the involvement of manufacturer engineers during start-up and calibration.
.3 Operation and Maintenance Manuals - .1 The manufacturer shall furnish a comprehensive instruction manual covering installation of the panels and operation of the various components. - .2 Instruction manuals shall describe in detail the...
AI summary The manufacturer is required to provide detailed instruction manuals covering installation, operation, maintenance, and replacement parts for the equipment, ensuring easy reference and inclusion of all relevant bulletins and instructions.
- .1 stantial completion of the work. - .2 (6) months following delivery to the Place of the Installation. - .2 Owner, through the Engineer, shall promptly give the Vendor notice in writing of observed defects and deficiencies that occur d...
AI summary The text outlines warranty obligations and factory test requirements for electrical equipment, including procedures for reporting defects, correcting issues, and assigning warranties. It also specifies testing standards for circuit breakers, current transformers, and bushings.
.4 Operation and Maintenance Manuals - .1 The manufacturer shall furnish a comprehensive instruction manual covering installation of the Recloser assembly and operation of the various components. - .2 Instruction manuals shall describe in...
AI summary The document outlines requirements for operation and maintenance manuals, specifying that manufacturers must provide comprehensive instructions for installation, assembly, dismantling, maintenance, and operation of equipment, along with replacement parts and vendor drawings in AutoCAD format.
- .2 CSA Standards - .1 C156.1, Ceramic and Glass Station Post Insulators - .2 G164, Hot Dipped Galvanized or Irregularly Shaped Articles - .3 W59, Welded Steel Construction (metal-ark welding) - .3 NEMA Standards - .1 Std. SG-6, Power Swi...
AI summary This document outlines the standards and submittal requirements for electrical components, including CSA, NEMA, ANSI/IEEE, and ISO standards, as well as specifications for operation and maintenance data and manufacturer drawings for disconnect switches.
(Cont'd) .8 (Cont'd) - 1.4 SUBMITTALS .2 Include:(Cont'd) including model, customer, location and installation dates. - .9 Heat losses at no load, 25%, 50%, 75% and 100% of rated output, in kW. - .10 Cooling air required in m3/s. - .11 Lis...
AI summary The document outlines the requirements for submittals related to equipment specifications, including details on heat losses, cooling air requirements, spare parts, factory test facilities, and maintenance capabilities. It also emphasizes the need for an operation and maintenance manual with technical data and supplier information.
8 OPERATIONS AND MAINTENANCE MANUALS - 8.1 The Vendor shall furnish to the Owner, through the Engineer, six (6) hard copies and one (1) electronic copy in Adobe Portable Document Format ("pdf") of operations and maintenance manuals specify...
AI summary The document outlines the requirements for the Vendor to provide the Owner with operations and maintenance manuals for equipment, including details on handling, installation, safety, and testing. The Vendor must deliver these materials 30 days before equipment shipment, with the cost included in the quoted price.
2.1 The overall assembly enclosure(s) shall provide protection from ingress of rodents, insects, and moisture; and the possibility of arcing faults within the enclosure. - 1.12.2 The material for all external sides of the enclosure and int...
AI summary The document outlines technical specifications for the assembly enclosures, including protection against environmental factors, material requirements, grounding provisions, environmental control, and fire suppression capabilities.
9 IN-PLANT INSPECTION AND TESTING - 9.1 The Owner, Purchaser, Engineer, and/or their authorized agents shall have the privilege of inspecting and witnessing all testing at all times during the manufacture of the equipment or materials orde...
AI summary This section outlines the requirements for in-plant inspection and testing during equipment manufacturing, including the right to inspect, advance notice requirements, and the submission of test results to the Engineer.
4.2 Operation and Maintenance Manuals - 4.2.1 The manufacturer shall furnish a comprehensive instruction manual covering installation of the pad-mounted transformer assembly and operation of the various components. - 4.2.2 Instruction manu...
AI summary The section outlines requirements for operation and maintenance manuals provided by the manufacturer, emphasizing detailed instructions for installation, assembly, dismantling, maintenance, and operation of equipment, along with replacement parts and manufacturer bulletins.
- .8 Formwork: - .1 Forms: to CSA-A23.1, plywood and lumber, clean and free of loose knots, splits or metal. - .2 Form Ties: to CSA-A23.1, removable or snap-off metal ties, fixed or adjustable length. Form ties, tie wire, spacers or other...
AI summary The text outlines specifications for formwork and concrete mix, referencing various Canadian standards and testing methods. It details requirements for materials such as form ties, release agents, and curing compounds, as well as specifications for concrete mix proportions and air content.
3.1 Installation END .10 CSA-G40.20/G40.21-04, Rolled or Welded Structural Quality Steels. .11 CSA S164-06, Limit States of Steel Structures. .12 CSA W47.1-03, Certification of Companies for Fusion Welding of Steel Structures. .13 CSA W47....
AI summary This section outlines the installation requirements for metal fabrications, specifying the applicable standards and materials. It includes references to various CSA and ASTM standards for structural steel, welding, and fabrication processes, as well as requirements for shop drawings and material specifications.
PART 2 - PRODUCTS - 2.1 Materials - 2.2 Asphalt Concrete
AI summary This section outlines the structure of Part 2 - Products, which includes subsections on materials and asphalt concrete. It provides a framework for discussing product-related regulations and standards.