3 Paragraph 6(c) of the Regulations is replaced by the following: (c) process, mix with another substance or use PCBs or a product containing PCBs.
AI summary Paragraph 6(c) of the Regulations is updated to prohibit the processing, mixing, or use of PCBs or products containing PCBs.
Light ballasts and pole-top electrical transformers - (2) A person may use the following equipment containing PCBs in a concentration of 50 mg/kg or more until December 31, 2026, if the equipment is in use on September 5, 2008: - (3) Subse...
AI summary The text outlines regulations regarding the use of equipment containing PCBs until December 31, 2026, and amends subsection 16(2.1) of the Regulations.
Revocation — reasons and representation - (10) The Minister shall not revoke an extension unless the Minister provides the applicant with - (a) written reasons for the revocation; and - (b) an opportunity to be heard, by written representa...
AI summary The text outlines the conditions under which the Minister may revoke an extension, requiring written reasons and an opportunity for the applicant to be heard. It also includes amendments to regulations regarding the revocation of extensions for equipment containing radioactive PCBs and military equipment.
Equipment for which extension applied for - (2) The owner of equipment for which an extension has been applied for under section 17 or 17.1 must, if feasible, affix a label in a readily visible location on the equipment. - (2) Paragraph 29...
AI summary The document outlines amendments to regulations regarding the labeling of equipment for which an extension has been applied for under sections 17 or 17.1. These amendments include requirements for labeling equipment or containers if labeling the equipment itself is not feasible, and the inclusion of a unique identification number.
End of use of equipment — 2026 - (4) The owner of the equipment referred to in subsection 16(2.1) other than equipment for which an extension is granted under subsection 17.1(2) or (4) — shall prepare a report that is current to December 3...
AI summary The text outlines requirements for equipment owners to prepare annual reports by December 31 of each year they own the equipment, and amends Section 33 of the Regulations by adding new provisions after subsection (4).
- 19 (1) Subject to subsection (2), these Regulations come into force on the day on which they are registered. - (2) Sections 7 to 9 come into force on the day that, in the sixth month after the month on which these Regulations are registe...
AI summary The regulations take effect on the day they are registered, with sections 7 to 9 becoming effective six months later, on the corresponding day or the last day of the sixth month if there is no corresponding day.
rp-pr/p1/2023/2023-12-23/html/reg1-eng.html) [, Part](https://gazette.gc.ca/rp-pr/p1/2023/2023-12-23/html/reg1-eng.html) I. Consultationsfollowing prepublication in the Canada Gazette , Part I The proposed Amendments were prepublished in t...
AI summary The proposed Amendments were prepublished in the Canada Gazette for a 60-day public comment period, with 35 comment submissions received from 14 interested parties. Stakeholders supported allowing the continued use and storage of PCB-containing equipment under certain conditions, but many sought clarification on definitions and scope.
Regulatory cooperation and alignment The Amendments are not expected to have any impact on regulatory cooperation and alignment. The Amendments will continue to respect Canada's international obligations and commitments.
AI summary The Amendments are not expected to impact regulatory cooperation and alignment, and will continue to respect Canada's international obligations and commitments.
Disclaimer: These summaries were generated by AI from the filings they describe. We take care to make them accurate, but errors are possible - and they aren't advice. Only the filings themselves are the record: if you're relying on something here, confirm it against the source documents or the Nova Scotia Energy Board's own record. Full disclaimer →