Home›Tariff Design›M06319›Evidence
Topic/Matter Intersection

Topic:"Tariff Design" in M06319

Matter: P-886 Nova Scotia Power Inc. (NSPI) Rate Application 2007
815 passages 41 documents

Tariff Design across all matters →

N-1-aNotice of Application and Direct Evidence - NSPI - REDACTED (Large File - 59 MB) 2 passages
Preamble
Appendix C – Operating Maintenance and General Expense 5 Year Forecast Appendix D – Credit Rating Reports Appendix E - Dr. Roger A. Morin Exhibits Appendix F – Load Forecast Report Appendix G - Cost of Service Study Appendix H - Proposed T...

AI summary The document outlines various appendices related to a regulatory proceeding, including operating maintenance forecasts, credit rating reports, load forecasts, cost of service studies, proposed tariffs, and regulation changes.

Unmetered
Unmetered Unmetered class revenue is made up of revenue from a variety oflighting types including street lights and miscellaneous small loads. Street light rates comprise capital, maintenance and "power and energy" components. The 2007 cap...

AI summary The text discusses unmetered class revenue, which includes revenue from street lights and small loads. It explains how street light rates are composed of capital, maintenance, and power and energy components, with the latter based on the Miscellaneous Small Loads rate. New unmetered service rates have been added to the Proposed Tariffs section.

N-1-aAppendix J - Proposed Regulation Changes 14 passages
The following charges shall apply:
The following charges shall apply: (a) Connection or reconnection of electric service, whether $21.00 standard metered or unmetered, to any premises during the Company's charge normal working hours. (b) Connection or reconnection of electr...

AI summary The document specifies the standard charges for connecting or reconnecting electric service to premises. A standard charge of $21.00 applies during normal working hours for both metered and unmetered services. For requests made outside of normal working hours (provided it is not a reconnection due to non-payment), a base charge of $21.00 is applied plus an additional $57.00 charge to cover extra costs.

7.1 SCHEDULE OF CHARGES
7.1 SCHEDULE OF CHARGES (h) Interest on Overdue Accounts 1.5% per month or part thereof, or a maximum of 19.56% per annum (i) Interest on Deposits Interest Rate based on Royal Bank prime rate minus 1 %; set January 1st of each year (j) Dis...

AI summary This section outlines the specific schedule of charges approved by the Nova Scotia Utility and Review Board. It details various fees including interest rates on overdue accounts (1.5% monthly), interest on deposits (linked to the Royal Bank prime rate), and specific costs for meter dispute tests, three-phase service contributions, and recording equipment installation. It also specifies annual fees for pole attachments and monthly charges for mobile radio network access.

7.1 SCHEDULE OF CHARGES
7.1 SCHEDULE OF CHARGES (h) Interest on Overdue Accounts 1.5% per month or part thereof, or a maximum of 19.56% per annum (i) Interest on Deposits Interest Rate based on Royal Bank prime rate minus 1 %; set January 1st of each year Dispute...

AI summary This section outlines the Schedule of Charges for various services and fees. It specifies interest rates for overdue accounts (1.5% monthly) and deposits (Royal Bank prime rate minus 1%). It also lists fixed fees for three-phase service contributions, recording equipment installation, miscellaneous requests, telecommunication pole attachments, and specific monthly charges for access to the NSPI Mobile Radio Network.

b) Annual Permit and Inspection
b) Annual Permit and Inspection The fee for an annual permit and inspection for any one establishment shall be the appropriate hourly rate.

AI summary The document specifies that the fee for an annual permit and inspection for any single establishment is determined by applying the appropriate hourly rate.

c) Special Permit and Inspection
c) Special Permit and Inspection The fee for a special permit and inspection for any one project shall be the appropriate hourly rate.

AI summary The document specifies the fee structure for special permits and inspections related to projects. It establishes that the fee for a single project's special permit and inspection will be calculated based on the appropriate hourly rate.

The fees for the examination of electrical plans and specifications shall be per review:
The fees for the examination of electrical plans and specifications shall be per review: 0 - 1,000 amps $ 86.00 Greater than 1,000 amps $ 86.00 e) Primary Services

AI summary The document specifies the fixed fees for the examination of electrical plans and specifications. The fee is set at $86.00 per review for both systems with a capacity of 0 - 1,000 amps and systems with a capacity greater than 1,000 amps.

b) Annual Permit and Inspection
b) Annual Permit and Inspection The fee for an annual permit and inspection for any one establishment shall be the appropriate hourly rate.

AI summary The document specifies the fee structure for the annual permit and inspection of establishments, stating that the fee for any single establishment shall be calculated based on the appropriate hourly rate.

c) Special Permit and Inspection
c) Special Permit and Inspection The fee for a special permit and inspection for any one project shall be the appropriate hourly rate.

AI summary The document specifies the fee structure for special permits and inspections related to projects. It establishes that the cost for these services will be determined based on the appropriate hourly rate.

e) Primary Services
e) Primary Services The fees for the inspection of a primary service (padmount, vault, etc.) shall be per installation. $117.00

AI summary The document specifies the fee structure for the inspection of a primary service, such as a padmount or vault. The fee is set at a flat rate of $117.00 per installation.

INSPECTION FEE SCHEDULE
INSPECTION FEE SCHEDULE INSTALLED VALUE OF INSPECTION ELECTRICAL VISITS PERMIT FEE INSTALLATION $ 0,000 to $ 2,000 1 $ 51.00 $ 2,001 to $ 4,000 2 $ 103.00 $ 4,001 to$ 6,000 2 $ 172.00 $ 6,001 to$ 8,000 2 $ 217.00 $ 8,001to$ 10,000 2 $ 263....

AI summary The document outlines the approved inspection fee schedule for electrical installations, categorized by the installed value of the inspection. It specifies the number of visits and permit fees for various price brackets, including a provision for costs exceeding $1,000,000. Additionally, it establishes minimum inspection fees for residential and commercial/industrial/institutional installations based on amperage levels.

Scheduled inspections on weekends (Saturday, Sunday) and statutory holidays:
Scheduled inspections on weekends (Saturday, Sunday) and statutory holidays: i) For the first hour or fraction thereof $120.00 ii) For each additional half-hour or fraction thereof $43.00 h) Inspections in Excess of Maximum Number of Visits

AI summary The document outlines the specific料金 (fees) associated with scheduled inspections conducted on weekends (Saturday and Sunday) and statutory holidays. The pricing structure consists of a base fee of $120.00 for the first hour or fraction thereof, followed by a recurring fee of $43.00 for each additional half-hour or fraction thereof. This section also includes a placeholder for addressing inspections that exceed the maximum number of permitted visits.

7.3 SCHEDULE OF LOAD RESEARCH MONITORING, REPORTING AND ANALYTICAL CHARGES
7.3 SCHEDULE OF LOAD RESEARCH MONITORING, REPORTING AND ANALYTICAL CHARGES The following schedule of charges shall apply to customers requesting Load Research information. (Note: Customers must provide access to a shared phone line for dat...

AI summary This section outlines the specific schedule of charges applicable to customers requesting Load Research information. It specifies that the capital cost of installed equipment will be recovered at actual cost. For setup, analysis and reporting, and specialized customer analysis, the charges are defined as the actual costs incurred by the Company plus a 25% markup. Customers are also required to provide access to a shared phone line for data collection via automatic meter reading equipment.

SCHEDULE OF LOAD RESEARCH CHARGES
SCHEDULE OF LOAD RESEARCH CHARGES 1.0 Recovery of Capital Cost of Meter Equipment ONE-TIME BI-MONTHLY MONTHLY Single or Three Phase 290.00 10.74 5.27 2.0 Recovery of Installation Charges Single Phase Service Self-Contained 54.00 Single Pha...

AI summary The document presents a schedule of load research charges approved by the Nova Scotia Utility and Review Board. It outlines specific costs for the recovery of capital costs for meter equipment, installation charges for various service types (including single-phase self-contained and transformer-rated services), and load research setup fees. The charges are structured with various payment frequencies, including one-time bi-monthly and monthly options.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED 4.0 Analysis and Reporting Base Package See Charge per Billing Period Load profile for peak day billing period plus times and magnitude of six highest peaks 33.00 Options Data File 33.00 Load profile for each...

AI summary The document outlines a pricing schedule for Nova Scotia Power Incorporated (NSPI) regarding analysis and reporting services. It specifies charges per billing period for various load profile analyses, power factor plots, and daily/weekly/monthly summaries. Additionally, it lists a specific charge for 'Specialized Analysis' under an 'Hourly Rate' category. The text indicates these charges are approved by the Nova Scotia Utility and...

N-1-aAppendix I - Miscellaneous Charges 1 passage
Appendix I Miscellaneous Charges
Appendix I Miscellaneous Charges Regulation Section Description Current Rate Proposed Rate (rounded) Assumptions Supporting Proposed Rates 7.1 (a) Connection/reconnection during normal working hours $ 21.00 $ 23.00 Average connection time...

AI summary The document presents a table detailing proposed updates to miscellaneous charges for connection and reconnection services. It outlines specific rate adjustments for connections during normal working hours, after-hours services, and temporary service premises. The proposed rates are supported by detailed cost assumptions, including labor costs for Customer Service Field Representatives (CSFR), fringe benefits, administrative overhead, vehicle overhead, and specific call-out requirements dictated by collective agreements.

N-1-aAppendix G - Cost of Service Study - REDACTED (Large File - 14 MB) 6 passages
1.2.1 Rate Base
1.2.1 Rate Base Exhibit 2 contains the net plant investment in the various asset categories, allowance for working capital and allowance for materials and supplies. In keeping with the Board's decision from the 2005 Rate Application, dated...

AI summary The document describes the methodology for determining and allocating the rate base for the proceeding. It identifies specific components included in the net plant investment, such as construction work in progress (CWIP), deferred charges, and allowances for working capital and materials. The text outlines the process for calculating allocation factors across customer classes based on energy sales, customer numbers, and demand contributions, utilizing both coincident and non-coincident peak demands and load factors.

NOVA SCOTIA POWER INC. SUMMARY OF REVENUE TO EXPENSE RECOVERY RATIOS
NOVA SCOTIA POWER INC. SUMMARY OF REVENUE TO EXPENSE RECOVERY RATIOS 2007 I lc_u_s_To_M_ER_C_L_As_s P_R_E_s_E_N~TI I PROPOSED DOMESTIC 98.23 99.01 SMALL GENERAL 101.51 100.78 GENERAL 109.30 105.07 LARGE GENERAL 97.44 99.14 SMALL INDUSTRIAL...

AI summary The document provides a summary of the revenue to expense recovery ratios proposed by Nova Scotia Power Inc. for various customer classes. It compares historical data from 2007 with the current proposed figures. The table details recovery percentages for various categories including Domestic, Small General, General, Large General, and several Industrial categories, as well as Municipal and Unmetered customers, showing a total recovery target of 100.00%.

ALLOCATION OF DISTRIBUTION OPERATING EXPENSES
ALLOCATION OF DISTRIBUTION OPERATING EXPENSES (1) TOTAL COMPANY (2) DOMESTIC (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL INDUSTRIAL (7) MEDIUM INDUSTRIAL (8) LARGE INDUSTRIAL (9) EXTRA Ll INTERR 2 (10) MUNICIPAL (11) UN METER...

AI summary The document presents a detailed table outlining the allocation of distribution operating expenses across various customer classes, including Domestic, Small General, General, General Large, Small Industrial, Medium Industrial, Large Industrial, Extra Large Industrial, Municipal, Unmetered, and others. It provides specific dollar amounts and allocation factors for these categories, categorized by various project or cost components (referenced as P-1, P-2, D-1, etc.). The data serves to illustrate how operating costs are distributed among different user groups.

NOVA SCOTIA POWER INC. DEVELOPMENT OF ALLOCATION FACTORS FOR THE YEAR ENDING DECEMBER 31, 2007
NOVA SCOTIA POWER INC. DEVELOPMENT OF ALLOCATION FACTORS FOR THE YEAR ENDING DECEMBER 31, 2007 (1) TOTAL COMPANY (2) DOMESTIC (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL INDUSTRIAL (7) MEDIUM INDUSTRIAL (8) LARGE INDUSTRIAL (...

AI summary The document presents a detailed breakdown of Nova Scotia Power Inc.'s allocation factors for the year ending December 31, 2007. It provides specific cost and demand figures categorized by customer class (e.g., Domestic, General, Industrial, Municipal) and infrastructure type (Generation Plant, Transmission Plant < 138kV, Transmission Plant > 69kV, and Distribution Plant). The data includes percentage responsibility for each class across different plant types to determine the allocation of costs to various customer segments.

NOVA SCOTIA POWER INC. DEVELOPMENT OF ALLOCATION FACTORS FOR THE YEAR ENDING DECEMBER 31 , 2007
NOVA SCOTIA POWER INC. DEVELOPMENT OF ALLOCATION FACTORS FOR THE YEAR ENDING DECEMBER 31 , 2007 (1) TOTAL COMPANY (2) DOMESTIC (3) SMALL GENERAL (4) GENERAL (5) GENERAL LARGE (6) SMALL INDUSTRIAL (7) MEDIUM INDUSTRIAL (8) LARGE INDUSTRIAL...

AI summary The document presents a detailed breakdown of Nova Scotia Power Inc.'s allocation factors for the year ending December 31, 2007. It provides a quantitative analysis of percentage responsibility across various customer classes, including Domestic, General, Industrial, and Municipal categories. The data tracks metrics such as total expenditure, marketing and sales costs, and meter data services, specifically highlighting the distribution of secondary gust revenue among different customer segments.

REVENUE TO EXPENSE COMPARISON
REVENUE TO EXPENSE COMPARISON (1) TOTAL (2) TOTAL (3) UNIT COST (4) TOTAL (5) (6) (7) DMD.RELATED EXPENSES ENG.RELATED EXPENSES ENG.RELATED ( C I kW.h) CUST.RELATED EXPENSES TOTAL OPER. EXPENSES TOTAL RATE REVENUE %REVENUE TO EXPENSES ( 1)...

AI summary The document presents a detailed revenue to expense comparison table for various customer classes, including Domestic, Small General, General, Large General, Small Industrial, Medium Industrial, Large Industrial, Extra Large Interconnect 2, Municipal, and Unmetered. The data breaks down expenses into DMD-related, ENG-related (including unit costs), and Customer-related categories. It calculates the total operating expenses against total rate revenue to determine the percentage of revenue to expenses, showing a balanced total of 100% across the combined categories.

N-1-aAppendix H - Proposed Tariffs (Large File - 21 MB) 137 passages
MINIMUM MONTHLY CHARGE
MINIMUM MONTHLY CHARGE The minimum monthly charge shall be $10.83.

AI summary The document establishes a specific minimum monthly charge for customers, set at $10.83.

AVAIL ABILITY:
AVAIL ABILITY: This tariff is applicable to electric energy used by any customer in a private residence for the customer's own domestic or household use, including lighting, cooking, heating, or refrigeration purposes. Upon application to...

AI summary The text defines the scope and applicability of the 'Domestic' tariff for electric energy. It specifies that the tariff applies to energy used in private residences for household purposes such as lighting, cooking, heating, and refrigeration. It also establishes rules for outbuildings, stating that the Domestic tariff applies if the building is used for personal hobbies, while commercial uses require General or Industrial tariffs. The tariff is subject to the provisions of the Public Utilities Act.

Optional Green Power Rider
Optional Green Power Rider Customers taking service under this rider may choose to support NSPI's Green Power program by purchasing "blocks" of Green Power. For every block purchased, NSPI will provide 125 kW.h per month from green energy...

AI summary The document outlines the Optional Green Power Rider, which allows customers under the Domestic Service rate to voluntarily support Nova Scotia Power Inc.'s (NSPI) Green Power program. Customers can purchase monthly 'blocks' of Green Power at a cost of $5 per month. Each block provides 125 kWh of green energy, intended to displace fossil fuel energy. This charge is applied in addition to the standard service bill.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED DOMESTIC SERVICE TARIFF Rate Codes 02, 03, 04

AI summary The document identifies Nova Scotia Power Incorporated (NSPI) as a primary entity in the proceeding, specifically regarding its Domestic Service Tariff. The text highlights the relevant rate codes (02, 03, and 04) associated with this tariff, which govern the pricing and service terms for domestic electricity customers.

MINIMUM MONTHLY CHARGE
MINIMUM MONTHLY CHARGE The minimum monthly charge shall be $10.83.

AI summary The document specifies the establishment of a minimum monthly charge for customers, setting the fixed amount at $10.83.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric energy used by any customer in a private residence for the customer's own domestic or household use, including lighting, cooking, heating, or refrigeration purposes. Upon application to t...

AI summary The text defines the scope and applicability of the domestic electricity tariff. It specifies that the tariff is intended for private residential use, including lighting, cooking, heating, and refrigeration. It notes that while the tariff is generally available to any customer under the Public Utilities Act, specific rules apply to outbuildings: these are billed based on actual use, with the domestic tariff applied only if the building is used primarily for personal pursuits or hobbies rather than commercial purposes.

Optional Green Power Rider
Optional Green Power Rider Customers taking service under this rider may choose to support NSPI's Green Power program by purchasing "blocks" of Green Power. For every block purchased, NSPI will provide 125 kW.h per month from green energy...

AI summary The document describes the Optional Green Power Rider, which allows customers under the Domestic Service rate to voluntarily purchase 'blocks' of Green Power from Nova Scotia Power Inc. (NSPI). Each block costs $5 per month and provides 125 kW.h of green energy monthly, intended to displace fossil fuel energy. This charge is applied as an additional cost on top of the standard service bill.

Special Terms and Provisions
Special Terms and Provisions - 1. Green Power, as defined for the purposes of this rider includes energy produced from renewable resources that have minimal impact on the environment, and could be independently certified by third party env...

AI summary The document outlines special terms and provisions for a specific rate rider. It defines 'Green Power' as energy sourced from renewable resources with minimal environmental impact, verifiable by independent third-party certification. Additionally, it establishes that the Company reserves the right to limit services under this rider based on the actual availability of green energy.

December, January and February
December, January and February 07:00am to 12:00 pm 14.560 cents per kilowatt hour 12:00 pm to 04:00pm 10.130 cents per kilowatt hour 04:00pm to 11:00 pm 14.560 cents per kilowatt hour 11:00 pm to 07:00am 5.065 cents per kilowatt hour The a...

AI summary The document outlines the specific electricity pricing structure for the months of December, January, and February. It establishes a time-of-use rate schedule for weekdays, featuring different cent-per-kilowatt-hour rates for morning, afternoon, evening, and overnight periods. It also specifies a flat rate for all consumption during Saturdays, Sundays, and statutory holidays.

March to November
March to November 07:00am to 11:00 pm 10.130 cents per kilowatt hour 11:00 pm to 07:00am 5.065 cents per kilowatt hour The above rates apply weekdays (Monday through Friday inclusive), excluding statutory holidays. For Saturdays, Sundays a...

AI summary The document specifies the electricity rates applicable from March to November. It outlines a time-of-use pricing structure where weekday consumption between 07:00 am and 11:00 pm is charged at 10.130 cents per kilowatt hour, while consumption between 11:00 pm and 07:00 am is charged at 5.065 cents per kilowatt hour. Additionally, a flat rate of 4.61 cents per kilowatt hour applies to all consumption on Saturdays, Sundays, and statutory holidays.

MINIMUM MONTHLY CHARGE
MINIMUM MONTHLY CHARGE The minimum monthly charge shall be $18.82.

AI summary The document specifies the fixed minimum monthly charge for customers, establishing the amount as $18.82.

AVAILABILITY:
AVAILABILITY: This tariff is only available to customers employing electric-based heating systems utilizing Electric Thermal Storage (ETS) equipment, and electric in-floor radiant heating systems utilizing thermal storage and appropriate t...

AI summary The text defines the eligibility criteria for a specific electricity tariff. It specifies that the tariff is restricted to residential customers using electric-based heating systems with Electric Thermal Storage (ETS) or electric in-floor radiant heating systems with approved thermal storage and controls. It further clarifies that the tariff is for domestic or household use and is restricted from other customer categories under Section 73 of the Public Utilities Act.

December, January and February
December, January and February 07:00am to 12:00 pm 16.010 cents per kilowatt hour 12:00 pm to 04:00pm 11 .160 cents per kilowatt hour 04:00pm to 11:00 pm 16.010 cents per kilowatt hour 11 :00 pm to 07:00am 5.580 cents per kilowatt hour The...

AI summary The document outlines the specific electricity pricing structure for the months of December, January, and February. It establishes a time-of-use rate schedule where peak periods (07:00 am to 12:00 pm, 12:00 pm to 04:00 pm, and 04:00 pm to 11:00 pm) are billed at 16.010 cents per kilowatt hour. Off-peak periods, including overnight hours and all weekend/statutory holiday consumption, are billed at a reduced rate of 5.580 cents per kilowatt hour.

DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL)
DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06 Any outbuilding located on residential property adjacent to a domestic dwelling and supplied electrically through a separate meter shall have rates applied in accordance with actu...

AI summary The document outlines the rate application rules for outbuildings located on residential properties that are supplied via separate meters. It specifies that the applicable tariff depends on the primary use of the building: the Domestic tariff applies if the building is used for personal pursuits and hobbies, while General or Industrial tariffs apply if the building is used for commercial purposes.

DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06
DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06 Any outbuilding located on residential property adjacent to a domestic dwelling and supplied electrically through a separate meter shall have rates applied in accordance with actu...

AI summary The text outlines the application of the Domestic Service Time-of-Day Tariff (Rate Code 06) to outbuildings on residential properties. It specifies that outbuildings supplied via separate meters must be billed based on their primary use. If the outbuilding is used for personal pursuits and hobbies, the Domestic tariff applies; however, if the primary use is commercial, the appropriate General or Industrial tariff must be used.

ENERGY CHARGE
ENERGY CHARGE - 11.21 cents per kilowatt hour for the first 200 kilowatt hours per month - 9.86 cents per kilowatt hour for all additional kilowatt hours

AI summary The document specifies the energy charge structure for customers, detailing a two-tiered pricing model based on monthly kilowatt-hour (kWh) consumption. The first 200 kWh per month are billed at 11.21 cents per kWh, while any consumption exceeding this initial amount is billed at a reduced rate of 9.86 cents per kWh.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric energy for use where the annual consumption is less than 32 000 kW.h per year and for which no other rates are applicable. APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE: MARCH...

AI summary The document specifies the availability criteria for a particular electricity tariff. It states that the tariff applies to electric energy for locations with an annual consumption of less than 32,000 kWh per year, provided no other applicable rates exist. The tariff was approved by the Nova Scotia Utility and Review Board and became effective on March 10, 2006.

ENERGY CHARGE
ENERGY CHARGE 12.15 cents per kilowatt hour for the first 200 kilowatt hours per month 10.69 cents per kilowatt hour for all additional kilowatt hours

AI summary The document specifies the energy charge structure for consumers, outlining a two-tiered pricing model based on monthly kilowatt-hour consumption. Customers are charged 12.15 cents per kilowatt hour for the first 200 kilowatt hours used per month, with a reduced rate of 10.69 cents per kilowatt hour applied to all usage exceeding that initial 200 kilowatt-hour threshold.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric energy for use where the annual consumption is less than 32 000 kW.h per year and for which no other rates are applicable. APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE:

AI summary The document specifies the applicability of a specific tariff for electric energy. This tariff is designated for customers with an annual energy consumption of less than 32,000 kWh per year, provided that no other applicable rates exist for their service. The tariff was approved by the Nova Scotia Utility and Review Board.

DEMAND CHARGE
DEMAND CHARGE $8.10 per month per kilowatt of maximum demand. 32 cents per kilowatt reduction in demand charge where the transformer was owned by the customer prior to February 1, 1974, or under Special Condition (2) as set out below.

AI summary The document specifies the monthly demand charge rate of $8.10 per kilowatt of maximum demand. It also outlines a specific credit of 32 cents per kilowatt for demand charge reductions applicable to customers who owned their transformers prior to February 1, 1974, or those meeting specific criteria under Special Condition (2).

ENERGY CHARGE
ENERGY CHARGE 8.60 cents per kilowatt hour for the first 200 kilowatt hours per month per kilowatt of maximum demand. 6.08 cents per kilowatt hour for all additional kilowatt hours.

AI summary The document specifies the components of the Energy Charge, which consists of two distinct rates based on monthly kilowatt hour (kWh) consumption. The first 200 kWh per month are charged at 8.60 cents per kWh for the first 200 kWh per month per kilowatt of maximum demand, while all subsequent kilowatt hours are charged at a reduced rate of 6.08 cents per kWh.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy where the annual consumption is 32 000 kW.h, or greater and for which no other rates are applicable.

AI summary The text defines the applicability criteria for a specific electricity tariff, stating that it applies to electric power and energy for customers with an annual consumption of 32,000 kW.h or greater, provided no other applicable rates exist.

DEMAND CHARGE
DEMAND CHARGE $8.38 per month per kilowatt of maximum demand. 32 cents per kilowatt reduction in demand charge where the transformer was owned by the customer prior to February 1, 1974, or under Special Condition (2) as set out below.

AI summary The document specifies the demand charge rate for electricity, set at $8.38 per month per kilowatt of maximum demand. It also includes a specific credit or reduction of 32 cents per kilowatt for customers who owned their transformers prior to February 1, 1974, or who meet certain special conditions.

ENERGY CHARGE
ENERGY CHARGE 8.90 cents per kilowatt hour for the first 200 kilowatt hours per month per kilowatt of maximum demand. 6.29 cents per kilowatt hour for all additional kilowatt hours.

AI summary The document specifies the energy charge rates for a utility service. It establishes a two-tiered pricing structure: a rate of 8.90 cents per kilowatt hour for the first 200 kilowatt hours per month per kilowatt of maximum demand, and a reduced rate of 6.29 cents per kilowatt hour for all additional kilowatt hours consumed.

MAXIMUM PER KW.H CHARGE/MINIMUM BILL
MAXIMUM PER KW.H CHARGE/MINIMUM BILL The maximum charge per kW.h will be that for a billing load factor of 10% except that the minimum monthly bill shall not be less than $12.65.

AI summary The text specifies the calculation method for the maximum charge per kilowatt-hour (kW.h) based on a billing load factor of 10%. It also establishes a minimum monthly bill threshold of $12.65, ensuring that customers are not charged less than this amount regardless of their actual consumption.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy where the annual consumption is 32 000 kW.h, or greater and for which no other rates are applicable.

AI summary The document specifies the applicability criteria for a particular electricity tariff. It states that the tariff is intended for electric power and energy consumption where the annual usage is equal to or greater than 32,000 kW.h, provided that no other specific rates apply to the service.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED LARGE GENERAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 12

AI summary This document identifies Nova Scotia Power Incorporated (NSPI) as the entity associated with the Large General Tariff. The tariff specifically applies to customers with a demand of 2,000 kV.A or 1,800 kW and over, categorized under Rate Code 12.

MINIMUM MONTHLY CHARGE
MINIMUM MONTHLY CHARGE The minimum monthly charge shall be $12.65.

AI summary The document specifies the minimum monthly charge for the utility service, establishing a fixed amount of $12.65.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy for any use except industrial, where the regular billing demand is 2 000 kV.A or 1 800 kW, and over.

AI summary The text specifies the scope of application for a particular electricity tariff. It clarifies that the tariff applies to electric power and energy for general use, excluding industrial customers whose regular billing demand meets or exceeds 2,000 kV.A or 1,800 kW.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a cap...

AI summary The document outlines special conditions regarding metering locations and associated costs. It specifies that metering is typically located on the low voltage side of a substation. If a customer requires primary metering, they must provide a capital contribution to cover the additional costs over secondary metering. It also establishes specific percentage adjustments (reductions or increases of 1.75%) for meter readings based on whether the substation high voltage side is 69 kV or higher.

LARGE GENERAL TARIFF
LARGE GENERAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 12

AI summary This section of the document introduces the Large General Tariff, which applies to industrial or commercial customers with a demand of 2,000 kV.A or 1,800 kW and over. It identifies Rate Code 12 as the specific classification for these high-demand customers.

DEMAND CHARGE
DEMAND CHARGE $10.46 per month per kilovolt ampere of maximum demand of the current month or the maximum actual demand of the previous December, January, or February occurring in the previous eleven (11) months. 32 cents per kilovolt amper...

AI summary The document specifies the calculation methodology for the demand charge, which is set at $10.46 per month per kilovolt ampere. This charge is based on either the maximum demand of the current month or the maximum actual demand from December, January, or February of the previous eleven months. Additionally, a reduction of 32 cents per kilovolt ampere is applied if the customer owns the transformer.

DEMAND CHARGE
DEMAND CHARGE $5.63 per month per kilovolt ampere of maximum demand. 32 cents per kilovolt ampere reduction in demand charge where the transformer was owned by the customer prior to February 1, 1974, or under Special Condition (2) as set o...

AI summary The text specifies the monthly demand charge rate of $5.63 per kilovolt ampere (kVA) of maximum demand. It also outlines a specific reduction of 32 cents per kVA for customers who owned their transformers prior to February 1, 1974, or those meeting specific conditions under Special Condition (2).

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any customer, for industrial use, including farming and processing, where the regular billing demand is less than 250 kV.A or 225 kW.

AI summary The text defines the scope of applicability for a specific tariff. It applies to customers using electric power and energy for industrial purposes, which specifically includes farming and processing operations. The eligibility is restricted to customers whose regular billing demand is below the threshold of 250 kV.A or 225 kW.

SMALL INDUSTRIAL TARIFF
SMALL INDUSTRIAL TARIFF (Up to 249 kV.A. or 224 kW) Rate Code 21

AI summary The document identifies the specific rate code and technical limitations for the Small Industrial Tariff. It specifies that this tariff, designated as Rate Code 21, applies to industrial customers with a power demand of up to 249 kilovolt-amperes (kV.A.) or 224 kilowatts (kW), which corresponds to a voltage level up to 249 kV.

DEMAND CHARGE
DEMAND CHARGE $6.04 per month per kilovolt ampere of maximum demand. 32 cents per kilovolt ampere reduction in demand charge where the transformer was owned by the customer prior to February 1, 1974, or under Special Condition (2) as set o...

AI summary The document specifies the demand charge rates for electricity service. The base demand charge is established at $6.04 per month per kilovolt-ampere of maximum demand. Additionally, it provides a specific reduction of 32 cents per kilovolt-ampere for customers who owned their transformers prior to February 1, 1974, or those falling under a specific Special Condition (2).

MAXIMUM PER KW.H CHARGE/MINIMUM BILL
MAXIMUM PER KW.H CHARGE/MINIMUM BILL The maximum charge per kW.h will be that for a billing load factor of 10% except that the minimum monthly bill shall not be less than $12.65.

AI summary The document specifies the calculation for the maximum charge per kilowatt-hour (kW.h) based on a billing load factor of 10%. It also establishes a mandatory minimum monthly bill of $12.65, ensuring that customers are not charged less than this amount regardless of their actual consumption.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any customer, for industrial use, including farming and processing, where the regular billing demand is less than 250 kV.A or 225 kW.

AI summary The text specifies the scope of applicability for a particular electricity tariff. It applies to industrial customers, including those involved in farming and processing, provided their regular billing demand is below the threshold of 250 kV.A or 225 kW.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a c...

AI summary The document outlines special conditions regarding metering and transformer ownership for customers with specific requirements. It specifies that metering is typically located on the low voltage side of the substation; however, if primary metering is required, the customer must provide a capital contribution for the additional costs. It also notes a 1.75% adjustment to metered kilowatt-hour usage for high-voltage side metering. Additionally, the Company may require customers to own transformers for non-standard service provisions.

MEDIUM INDUSTRIAL TARIFF
MEDIUM INDUSTRIAL TARIFF (250 kV.A or 225 kW- 1 999 kV.A or 1 799 kW) Rate Code 22

AI summary The document identifies the 'Medium Industrial Tariff' (Rate Code 22) as a specific tariff category for industrial customers. It defines the applicable load range for this tariff as being between 250 kV.A (or 225 kW) and 1,999 kV.A (or 1,799 kW).

DEMAND CHARGE
DEMAND CHARGE $9.05 per month per kilovolt ampere of maximum demand. 32 cents per kilovolt ampere reduction in demand charge where the transformer is owned by the customer.

AI summary The document specifies the demand charge rates for the utility. The base charge is set at $9.05 per month per kilovolt-ampere of maximum demand. Additionally, a reduction of 32 cents per kilovolt-ampere is provided in instances where the customer owns the transformer.

MINIMUM MONTHLY CHARGE
MINIMUM MONTHLY CHARGE The minimum monthly charge shall be $12.65.

AI summary The document establishes the minimum monthly charge for customers, specifying that the amount shall be $12.65.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any industrial customer having a regular billing demand of250 kV.A (225 kW) and over, and for which no other rates are applicable.

AI summary The text specifies the eligibility criteria for a specific tariff. It applies to industrial customers with a regular billing demand of 250 kVA (225 kW) or greater, provided that no other applicable rates exist for those customers.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a c...

AI summary The document outlines special conditions for a specific tariff, primarily focusing on metering requirements and customer eligibility. It specifies that metering is typically at the low voltage side; however, if primary metering is required due to customer needs, the customer must provide a capital contribution for the additional costs. It also notes a 1.75% reduction in metered kilowatt-hour usage for high voltage side metering and establishes a minimum billing demand of 250 kV.A (225 KW) for continued tariff availability.

MEDIUM INDUSTRIAL TARIFF
MEDIUM INDUSTRIAL TARIFF (250 kV.A or 225 kW- 1 999 kV.A or 1 799 kW) Rate Code 22

AI summary The document identifies a specific tariff category designated as the 'Medium Industrial Tariff.' It specifies the load range for this rate code, which applies to customers with a demand between 250 kV.A (or 225 kW) and 1,999 kV.A (or 1,799 kW). This classification is associated with Rate Code 22.

DEMAND CHARGE
DEMAND CHARGE $9.71 per month per kilovolt ampere of maximum demand. 32 cents per kilovolt ampere reduction in demand charge where the transformer is owned by the customer.

AI summary The document specifies the demand charge rate, which is set at $9.71 per month per kilovolt ampere of maximum demand. Additionally, it outlines a specific credit of 32 cents per kilovolt ampere for demand charge reductions in instances where the transformer is owned by the customer.

MINIMUM MONTHLY CHARGE
MINIMUM MONTHLY CHARGE The minimum monthly charge shall be $12.65.

AI summary The document specifies the minimum monthly charge for the regulated service, establishing the amount at $12.65.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any industrial customer having a regular billing demand of250 kV.A (225 kW) and over, and for which no other rates are applicable.

AI summary The text defines the applicability of a specific electricity tariff, stating it is intended for industrial customers with a regular billing demand of 250 kV.A (225 kW) or higher, provided that no other specific rates apply to the customer.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a c...

AI summary The document outlines special conditions for a specific utility tariff. It specifies that metering typically occurs on the low voltage side of the substation; however, if a customer requires primary metering, they must provide a capital contribution covering the additional costs relative to secondary metering. Furthermore, it establishes a 1.75% reduction in metered kWh usage for high-voltage side metering and grants the Company the right to withdraw the tariff from customers who do not maintain a minimum billing demand of 250 kV.A (225 KW).

LARGE INDUSTRIAL TARIFF
LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23

AI summary The document defines the scope of the Large Industrial Tariff, specifically identifying it as Rate Code 23. This tariff applies to large industrial customers with a demand of 2,000 kVA or 1,800 kW and over.

DEMAND CHARGE
DEMAND CHARGE $8.74 per month per kilovolt ampere of maximum demand of the current month or the maximum actual demand of the previous December, January or February occurring in the previous eleven (11) months. 32 cents per kilovolt ampere...

AI summary The text specifies the calculation methodology for the demand charge, which is set at $8.74 per month per kilovolt-ampere (kVA) of maximum demand. This demand is determined by the maximum demand of the current month or the maximum actual demand from December, January, or February of the preceding eleven months. Additionally, a reduction of 32 cents per kVA is applied if the transformer is owned by the customer.

MINIMUM MONTHLY CHARGE
MINIMUM MONTHLY CHARGE The minimum monthly charge shall be the greater of$12.65 or the demand charge.

AI summary The document specifies the calculation for the minimum monthly charge, establishing that it is determined by taking the greater of two values: a fixed amount of $12.65 or the calculated demand charge.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy supplied at the low voltage side of the bulk power transformer to any industrial customer having a regular billing demand of 2 000 kV.A or 1 800 kW, and over.

AI summary The document specifies the applicability criteria for a specific electricity tariff. It applies to three-phase electric power and energy supplied at the low voltage side of the bulk power transformer. The target audience is industrial customers with a regular billing demand of 2,000 kV.A or 1,800 kW or greater.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) At the option of the Company, supply may be at distribution voltage. Meter readings shall be increased by 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transform...

AI summary The document outlines special conditions for a specific utility tariff, primarily addressing metering and transformer loss adjustments. It specifies that meter readings will be increased by 1.75% for each transformation between the meter and the low voltage side of a bulk power supply transformer to account for losses. It also mandates that customers requiring primary metering must provide a capital contribution for the additional costs. Finally, it establishes eligibility criteria, stating the Company may withdraw the tariff if a customer fails to maintain a regular demand of 2,000 kVA or 1,800 kW.

DEMAND CHARGE
DEMAND CHARGE $9.38 per month per kilovolt ampere of maximum demand ofthe current month or the maximum actual demand of the previous December, January or February occurring in the previous eleven (11) months. 32 cents per kilovolt ampere r...

AI summary The document specifies the calculation methodology for the demand charge, which is set at $9.38 per month per kilovolt-ampere (kVA). The basis for this charge is either the maximum demand of the current month or the maximum actual demand from the previous December, January, or February within the preceding eleven months. Additionally, a reduction of 32 cents per kVA is applied if the customer owns the transformer.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) At the option ofthe Company, supply may be at distribution voltage. Meter readings shall be increased by 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transforme...

AI summary The document outlines special conditions for a specific electricity tariff, primarily focusing on metering and transformer loss adjustments. It specifies that meter readings will be adjusted by 1.75% for each transformation between the meter and the low-voltage side of the bulk power supply transformer. Additionally, it mandates that customers requiring primary metering must make a capital contribution for the extra costs. Finally, it establishes eligibility criteria, stating the Company may withdraw the tariff if a customer fails to maintain a minimum demand of 2,000 kVA or 1,800 kW.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 - ( 4) The Company reserves the right to have a separate service agreement, if in the opinion of the Company issues not specifically set...

AI summary This section of the Large Industrial Tariff (Rate Code 23) outlines the requirements for high-demand customers (2,000 kV.A or 1,800 kW and over). It establishes the Company's right to enter into separate service agreements for specific issues and mandates that customers must ensure their load does not compromise power supply system integrity. Specific technical factors for assessment include reliability, harmonics, voltage flicker, unbalance, and stability, which will be governed by written operating agreements.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 - ( 4) The Company reserves the right to have a separate service agreement, if in the opinion of the Company issues not specifically set...

AI summary The text outlines the conditions for Nova Scotia Power Incorporated's Large Industrial Tariff (Rate Code 23) for high-capacity loads (2,000 kV.A or 1,800 kW and over). It specifies that the Company reserves the right to establish separate service agreements for unique issues. Furthermore, it mandates that customers must ensure their load does not compromise power supply system integrity, specifically regarding reliability, harmonics, voltage flicker, unbalance, and stability, as defined in a written operating agreement.

INTERRUPTIBLE RIDER TO THE LARGE INDUSTRIAL TARIFF (Rate Code 25)
INTERRUPTIBLE RIDER TO THE LARGE INDUSTRIAL TARIFF (Rate Code 25) Customers who qualify for interruptible service will receive a $3.43 per month per kilovolt ampere reduction in demand charge for billed interruptible demand. The billed int...

AI summary The text outlines the structure of the Interruptible Rider for the Large Industrial Tariff (Rate Code 25). It specifies a monthly demand charge reduction of $3.43 per kilovolt-ampere (KVA) for billed interruptible demand. Billed interruptible demand is calculated as the difference between contracted firm demand and total billing demand, provided the billing demand exceeds the contracted firm demand. The calculation also includes a look-back provision to determine the maximum interruptible demand over a rolling eleven-month period.

AVAILABILITY:
AVAILABILITY: This rider will be available to a minimum regular billing demand of 2 000 k V .A at 90% Power Factor, under the following terms and conditions: - (1) The customer has provided written notice of his desire to take service unde...

AI summary The text outlines the terms and conditions for a specific service rider requiring a minimum regular billing demand of 2,000 kVA at a 90% Power Factor. Key requirements include written notice from the customer to identify firm and interruptible load portions, a mandate for customers to reduce interruptible load within ten minutes of a request, and specific protocols for service restoration. It also specifies penalty charges for non-compliance and notice periods for converting between firm and interruptible service rates.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23

AI summary The text identifies Nova Scotia Power Incorporated as the entity associated with the Large Industrial Tariff. This specific tariff applies to customers with a demand of 2,000 kVA or 1,800 kW and over, categorized under Rate Code 23.

INTERRUPTIBLE RIDER TO THE LARGE INDUSTRIAL TARIFF (Rate Code 25)
INTERRUPTIBLE RIDER TO THE LARGE INDUSTRIAL TARIFF (Rate Code 25) Customers who qualify for interruptible service will receive a $3.43 per month per kilovolt ampere reduction in demand charge for billed interruptible demand. The billed int...

AI summary The text outlines the financial structure of the Interruptible Rider for the Large Industrial Tariff (Rate Code 25). Customers eligible for interruptible service receive a monthly credit of $3.43 per kilovolt-ampere (KVA) for billed interruptible demand. This demand is calculated as the difference between contracted firm demand and total billing demand, provided the billing demand is less than the contracted firm demand. The calculation for billed interruptible demand considers the maximum interruptible demand of the current month or specific months from the previous eleven-month period.

AVAILABILITY:
AVAILABILITY: This rider will be available to a minimum regular billing demand of 2 000 k V .A at 90% Power Factor, under the following terms and conditions: - (1) The customer has provided written notice of his desire to take service unde...

AI summary The text outlines the availability and operational requirements for a specific rate rider for customers with a minimum regular billing demand of 2,000 kVA at a 90% Power Factor. It establishes terms for customers seeking interruptible load, requiring written notice, a 10-minute response time for load reduction requests, and company approval for service restoration. It also specifies penalty charges for non-compliance and notice periods for converting between firm and interruptible service rates.

NOV A SCOTIA POWER IN CORPORA TED
NOV A SCOTIA POWER IN CORPORA TED LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 (6) Interruption is limited to 16 hours per day and 5 days per week to a maximum of30% of the hours per month and 15% of the hours in...

AI summary The document specifies the interruption limits for customers under the Large Industrial Tariff (Rate Code 23), which applies to loads of 2,000 kV.A or 1,800 kW and over. It establishes that interruptions are restricted to a maximum of 16 hours per day and 5 days per week, further capped at 30% of monthly hours and 15% of annual hours.

LARGE INDUSTRIAL TARIFF
LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 (6) Interruption is limited to 16 hours per day and 5 days per week to a maximum of 30% of the hours per month and 15% of the hours in a year.

AI summary The document specifies the service requirements for the Large Industrial Tariff (Rate Code 23), which applies to customers with a demand of 2,000 kVA or 1,800 kW and over. It outlines specific limitations on service interruptions, restricting them to a maximum of 16 hours per day and 5 days per week, while further capping total annual and monthly interruption percentages to 15% and 30% respectively.

DEMAND CHARGE
DEMAND CHARGE $8.96 per month per kilovolt ampere of maximum demand ofthe current month or the maximum actual demand of the previous December, January or February occurring in the previous eleven (11) months. 32 cents per kilovolt ampere r...

AI summary The text defines the monthly demand charge rate of $8.96 per kilovolt ampere (kVA). This charge is calculated based on either the maximum demand of the current month or the highest actual demand recorded during the preceding three-month period (December, January, or February) within the previous eleven months. Additionally, a reduction of 32 cents per kVA is applied if the customer owns the transformer.

DEMAND CHARGE
DEMAND CHARGE $9.89 per month per kilovolt ampere of maximum demand of the current month or the maximum actual demand of the previous December, January or February occurring in the previous eleven (11) months. 32 cents per kilovolt ampere...

AI summary The document specifies the calculation methodology for demand charges. The rate is set at $9.89 per month per kilovolt ampere (kVA) of maximum demand, based on either the current month's maximum demand or the maximum actual demand recorded during December, January, or February of the previous eleven months. Additionally, a reduction of 32 cents per kVA is applied if the transformer is owned by the customer.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy, supplied at the low voltage side of the bulk power transformer, to municipal electric utilities. Meter readings shall be increased by 1.75% for each transfor...

AI summary The text specifies the applicability of the tariff to three-phase electric power and energy supplied to municipal electric utilities at the low voltage side of the bulk power transformer. It outlines specific adjustments for meter readings, requiring an increase of 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transformer to account for transformation losses, while requiring a reduction for metering at transmission voltage.

CUSTOMER CHARGE:
CUSTOMER CHARGE: The Customer Charge will be set annually based on NSPI's budgeted customer costs, and will be limited to $ 50,000 per month. This charge will be $20,700 per month for the period January 1, 2006 to December 31 , 2006.

AI summary The document specifies the determination of the Customer Charge, which is calculated annually based on Nova Scotia Power Inc.'s (NSPI) budgeted customer costs. It establishes a monthly cap of $50,000 for this charge. Additionally, it defines a specific historical rate of $20,700 per month for the period spanning January 1, 2006, to December 31, 2006.

ENERGY CHARGE
ENERGY CHARGE The energy rate, in cents per kWh, will be calculated annually based on NSPI's budgets. The calculation will utilize the following formula and will be consistent with approved accounting and costing procedures. \left[ \left(...

AI summary The document outlines the methodology for calculating the energy rate in cents per kWh, which is based on Nova Scotia Power Inc.'s annual budgets. It provides a specific mathematical formula incorporating the Energy Portion of Base Load Fixed Costs, Annual Base Load Energy at an 85% Capacity Factor, Base Load Variable Costs, Base Load Energy Production, and adjustments for Loss and Export Benefits Credit. The rate is set at 5.390 cents per kW.h for the 2006 calendar year.

Load Factor Adjustment (LFA):
Load Factor Adjustment (LFA): The Energy Charge will be adjusted for varying Customer Load Factors in accordance with the following schedule: APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE: JANUARY I, 2006

AI summary The document specifies that the Energy Charge will be adjusted based on varying Customer Load Factors. This adjustment follows a predefined schedule approved by the Nova Scotia Utility and Review Board, which became effective on January 1, 2006.

EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF
EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF Customer Load Factor In Billing Period Load Factor Adjustment LFA) Energy Charge (in ¢/KWh) Customer Load Load Factor Energy Factor In Billing Adjustment Charge (in Period ltLFA) ¢/KWh} (Below 67...

AI summary The document outlines the pricing structure for the Extra Large Industrial Interruptible Tariff. It provides a detailed table of Load Factor Adjustment (LFA) factors, Energy Charges (in ¢/KWh), and Energy Factors based on specific Customer Load Factor percentages ranging from 67% to 83%. Notably, customers with a Load Factor below 67% are subject to the Interruptible Rider. The pricing factors are established through a five-step determination process.

Preamble
- a) Determine the expected system load factor for the year for which the ELIIR is being calculated. - b) Apply this system load factor to the Large Industrial Interruptible Rider to determine a cost per kWh. - c) Determine the ELIIR in ce...

AI summary The text outlines a multi-step methodology for calculating and adjusting the ELIIR (Electricity Load Interruptible Rider) and its associated Load Factor Adjustments (LFA). The process involves determining the expected system load factor, applying it to the Large Industrial Interruptible Rider to find a cost per kWh, and using polynomial curve fitting to align the ELIIR with the LFA. This procedure is intended for annual application to adjust the LFA values within a specific table.

NOV A SCOTIA POWER IN CORPORA TED
NOV A SCOTIA POWER IN CORPORA TED EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF TARIFF HAS BEEN DISCONTINUED

AI summary The document provides a brief notification regarding the 'Extra Large Industrial Interruptible Tariff' associated with Nova Scotia Power Incorporated. It explicitly states that this specific tariff has been discontinued.

Customer Load Factor (CLF) (%):
Customer Load Factor (CLF) (%): CLF kWh consumed during billing period under this rate + kWh actually interrupted (Tariff Demand (TD) x hours in month) In the above formula, kWh actually interrupted will be calculated as the kW curtailed m...

AI summary The document defines the calculation methodology for Customer Load Factor (CLF) used in electricity billing. It specifies that CLF is determined by the kilowatt-hours (kWh) consumed during a billing period plus the kWh actually interrupted (calculated as kW curtailed multiplied by hours curtailed). The formula accounts for changes in Tariff Demand (TD) during the month and provides specific instructions for billing periods involving pre-arranged down time, where energy is calculated based on normal and lower TD values.

Calculation of CLF During Planned Shutdown Periods:
Calculation of CLF During Planned Shutdown Periods: The Company will allow the customer to lower the TD value for bona fide maintenance periods, limited to two (2) events per year, unless otherwise agreed to with the Company during the cou...

AI summary The Company proposes a mechanism allowing customers to lower their Tariff Demand (TD) value during bona fide maintenance periods to ensure that major equipment repairs do not negatively impact Customer Load Factor (CLF) values. Customers may request this for up to two events per year, provided they give at least three weeks' notice for shutdowns exceeding 72 hours. The Company requires specific notice details, including the duration of the shutdown and the intended TD value for that period.

Tariff Demand:
Tariff Demand: The customer will notify the Company of the value of the Tariff Demand in kW for the forthcoming year on or before November 1. The TD represents the total amount of load subscribed to this rate. The Company will permit devia...

AI summary The text outlines the procedures for establishing and adjusting the Tariff Demand (TD), which represents the total subscribed load for a customer. Customers must notify the Company of their TD value in kW by November 1 of the preceding year. The Company allows for deviations based on load management initiatives of at least 2 MW or permanent capacity alterations. Additionally, customers may request an annual market-based adjustment of up to 10% of the existing TD by February 28 of the applicable rate year.

EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF
EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF With the exception of Planned Shutdown Periods, the annual market adjustment, load management initiatives and permanent alterations to production capacity, no changes will be permitted except for...

AI summary The document outlines the restrictions and permissions regarding the Extra Large Industrial Interruptible Tariff. It specifies that no changes to the tariff are permitted except for force majeure reasons or with the express permission of Nova Scotia Power Inc., excluding specific items like Planned Shutdown Periods, annual market adjustments, and load management initiatives. Additionally, the Company allows forward-looking monthly adjustments to the Tariff Demand (TD) for the first three months following initial subscription or after a previously described deviation.

Loss Adjustment:
Loss Adjustment: A 2% adjustment is included in the Energy Charge to account for system losses. The Loss Adjustment will be calculated annually.

AI summary The document specifies that a 2% adjustment is incorporated into the Energy Charge to account for system losses. This Loss Adjustment is scheduled to be calculated on an annual basis.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF TARIFF HAS BEEN DISCONTINUED

AI summary Nova Scotia Power Incorporated has discontinued the Extra Large Industrial Interruptible Tariff. The document serves as a formal notice of the removal of this specific tariff structure from the utility's active offerings.

Export Benefits Credit (EBC) ($/MWh):
Export Benefits Credit (EBC) ($/MWh): The Export Benefits Credit is the expected customer energy requirement under this rate divided by the adjusted Company energy requirement, multiplied by the total margin on export sales divided by the...

AI summary The text provides the formulaic definition for the Export Benefits Credit (EBC), which is a component of the rate design. The credit is calculated by taking the ratio of the expected customer energy requirement to the adjusted Company energy requirement, then multiplying that figure by the ratio of the total margin on export sales to the expected sales (MWh) to the customer under the specific rate.

Expected customer energy requirement Total margin on export sales
Expected customer energy requirement Total margin on export sales ffiC = X Adjusted Company Energy Requirement Expected sales (MWh) to the customer under this rate Where:

AI summary The provided text is a technical excerpt from a regulatory filing defining the variables and components for calculating the 'Adjusted Company Energy Requirement' and 'Total margin on export sales.' It establishes the mathematical basis for determining the expected energy requirements and sales volumes for a specific customer under a proposed rate structure.

Minimum Energy Charge:
Minimum Energy Charge: If the Customer Load Factor is below the minimum specified in the Load Factor Adjustment table in a given billing period, the customer will be billed under the Interruptible Rider to the Large Industrial Rate.

AI summary The document specifies the billing procedure for customers whose Customer Load Factor falls below the minimum threshold defined in the Load Factor Adjustment table. In such instances, the customer is transitioned to being billed under the Interruptible Rider associated with the Large Industrial Rate for that billing period.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF TARIFF HAS BEEN DISCONTINUED

AI summary The document provides a notification regarding the Extra Large Industrial Interruptible Tariff for Nova Scotia Power Incorporated. It states that this specific tariff has been discontinued.

EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF
EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF - 4. If the customer ceases taking service under this rate, they may return to this rate after a minimum of twelve (12) months from the effective date that service under this rate was cancelled....

AI summary The document outlines the specific requirements and limitations for the Extra Large Industrial Interruptible Tariff. Key provisions include a 12-month waiting period for customers wishing to return to this rate after cancellation, a minimum service voltage of 138 kV, and a requirement for customers to own their transformation facilities. Additionally, the total aggregate service under this rate is capped at 275 MW, and customers must provide evidence that a significant portion of their anticipated usage is at risk under the Electricity Load Interruptible Rider (ELIIR).

1. Priority of Interruptions:
1. Priority of Interruptions: In the event of an interruption for reasons of supply integrity, rate classes will be called upon to provide capacity to NSPI in the following order: - 1. Generation Replacement and Load Following (GRLF) Rate;...

AI summary The document outlines the hierarchy of rate classes that Nova Scotia Power Inc. (NSPI) will contact during power supply interruptions caused by supply integrity issues. The priority order begins with the Generation Replacement and Load Following (GRLF) Rate, followed by the Extra Large Industrial Interruptible Rate, and finally the Interruptible Rider to the Large Industrial Rate. Additionally, it specifies that the Extra Large Industrial Interruptible Rate may be called upon for economic reasons, with calls made equitably to all customers under that specific rate.

2. Causes for Interruption:
2. Causes for Interruption: Interruptions to supply under this rate will be for either Supply or Economic reasons, as defined below. Calls will be made using the process defined in the Terms and Conditions of this rate.

AI summary The document specifies that interruptions to the electricity supply under the current rate structure will occur for two primary reasons: Supply or Economic reasons. It further notes that the specific process for making these calls is governed by the Terms and Conditions of the rate.

NOVA SCOTIA POWER INCORPORATED
NOVA SCOTIA POWER INCORPORATED EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF TARIFF HAS BEEN DISCONTINUED

AI summary The document provides a formal notice regarding the Extra Large Industrial Interruptible Tariff under Nova Scotia Power Incorporated. It explicitly states that this specific tariff has been discontinued.

3. Interruption Notification Procedure:
3. Interruption Notification Procedure: The customer will make available suitable contact telephone numbers of a person or persons who are able to reduce the required load within the time requested by NSPI during the Interruption call. The...

AI summary This section outlines the procedures for interruption notifications between Nova Scotia Power Inc. (NSPI) and its customers. Customers are required to provide contact information for personnel capable of reducing load within requested timeframes. NSPI maintains sole discretion over notification timing and can request up to the full subscribed load. Customers must nominate minimum interruptible load blocks based on equipment practicality. For Economic Interruptions, NSPI will provide a faxed confirmation detailing the interruption's duration, capacity in MW, and the applicable Buy-Through-Rate.

5. Advance Notice for Economic Interruptions:
5. Advance Notice for Economic Interruptions: In the event of an Economic Interruption, the Company may request a minimum of 20 MW or the greater value stipulated in the prior agreement, (see section 7 below), to be interrupted with a mini...

AI summary The document outlines the procedures for Advance Notice for Economic Interruptions. In such events, Nova Scotia Power Inc. (the Company) may request to interrupt a minimum of 20 MW (or a value specified in a prior agreement) with at least 30 minutes' notice. For any remaining subscribed load, a minimum of 120 minutes' notice is required. The Company commits to providing forewarning on a best-efforts basis if an interruption becomes necessary.

7. Frequency and Duration of Economic Interruptions:
7. Frequency and Duration of Economic Interruptions: The annual maximum energy that may be called for interruption or buy through under Economic Interruption will be 0.31 GWh per MW of Tariff Demand subscribed under this rate. The frequenc...

AI summary The text outlines the parameters for Economic Interruptions, establishing an annual maximum energy limit of 0.31 GWh per MW of subscribed Tariff Demand. It specifies that the frequency and duration of these interruptions must be mutually agreed upon via a separate agreement, with a minimum duration of three hours per event. If the Company exhausts the customer's apportioned energy, it must invite the customer to participate in additional mutually beneficial interruption opportunities.

8. Penalties for Failure to Interrupt for Supply Reasons:
8. Penalties for Failure to Interrupt for Supply Reasons: Failure of the customer to comply in whole or in part with any Supply Interruption request will result in penalty charges. The penalty charge for each failure shall be twice the cos...

AI summary The document outlines the penalty structure for customers who fail to comply with Supply Interruption requests. If a customer fails to interrupt, they will be charged a penalty equal to twice the cost of the appropriate billing for the total load subscribed under that rate and the energy used for that specific month. The penalties apply to each failure, including instances where the customer fails to respond to subsequent calls within the same month.

9. Buy-Through Option for Economic Interruptions:
9. Buy-Through Option for Economic Interruptions: If the customer is unable to comply with any Economic Interruption request, the energy that is not interrupted as requested by the Company shall be billed at a Buy-Through Rate. The buy thr...

AI summary The text outlines the 'Buy-Through Option for Economic Interruptions' for customers under a specific rate. If a customer cannot comply with an energy interruption request made by Nova Scotia Power Inc. (NSPI), the non-interrupted energy is billed at a 'Buy-Through Rate.' This rate is calculated monthly based on the estimated fuel cost of peaking combustion turbines, a heat rate of 15,000 BTU/kWh, and a $5/MWh fixed component. NSPI commits to balancing interruption hours among customers under this rate.

TARIFF HAS BEEN DISCONTINUED
TARIFF HAS BEEN DISCONTINUED APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE:

AI summary The provided text is a heading indicating that a specific tariff has been discontinued by the Nova Scotia Utility and Review Board. No further details regarding the specific tariff, the reasons for discontinuation, or the effective date are provided in this excerpt.

EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF
EXTRA LARGE INDUSTRIAL INTERRUPTIBLE TARIFF If the customer elects the Buy-Through Option, the customer will be billed for the energy requested on a take-or-pay basis at the buy-through rate. If a Supply Interruption is requested while the...

AI summary The document outlines the billing and operational conditions for the Extra Large Industrial Interruptible Tariff, specifically regarding the 'Buy-Through Option.' Customers who select this option are billed for requested energy on a take-or-pay basis at the buy-through rate. However, the document specifies that if a customer requests a Supply Interruption while utilizing the Buy-Through-Rate during an Economic Interruption, the Buy-Through option is voided, and the standard processes and penalties for a Supply Interruption are subsequently applied.

12. Billing Order for Multiple-Rate Customers:
12. Billing Order for Multiple-Rate Customers: All energy taken by the customer at or above the upper limit of the Tariff Demand level shall be billed under the applicable Real Time Pricing rate. The customer will set an upper and lower th...

AI summary The document outlines the billing order for customers utilizing multiple-rate structures. It specifies that energy consumption at or above a customer-defined upper threshold (in kW) will be billed under the Real Time Pricing (RTP) rate. Conversely, energy consumption below a defined lower threshold may be billed under any Nova Scotia Power International (NSPI) rate for which the customer is eligible.

14. Sole Supplier:
14. Sole Supplier: NSPI will be the sole supplier of all external power requirements (i.e. : excluding selfgeneration) for customers taking service under this rate.

AI summary Nova Scotia Power International (NSPI) is identified as the exclusive provider of all external power requirements for customers under this specific rate. This provision clarifies that while customers may engage in self-generation, any electricity required from the external grid must be sourced through NSPI.

15. Power Factor:
15. Power Factor: Under normal operating conditions, an average power factor over the entire billing period, calculated for kWh consumed and lagging kV Ar-h, as recorded, of not less than 90% lagging for the total customer load (under all...

AI summary The document specifies the power factor requirements for customers under normal operating conditions. It mandates that an average power factor of not less than 90% lagging must be maintained for the total customer load, calculated based on kWh consumed and lagging kV Ar-h. Failure to meet this threshold will result in the application of specific constant adjustment factors to the applicable Energy Charge.

17. Conversion of Interruptible Load to Firm:
17. Conversion of Interruptible Load to Firm: Should any customer under this rate desire to be served under any applicable firm service rate, a five (5) year advance written notice must be given to the company so as to ensure adequate capa...

AI summary This section outlines the procedures and requirements for customers wishing to convert from interruptible load to firm service. Customers must provide five years of advance written notice to ensure capacity availability, though the company may allow earlier conversion. Conversely, customers wishing to revert from firm to interruptible service must remain on the firm rate for at least two years, with the company retaining the right to permit an earlier transition.

18. Metering Costs:
18. Metering Costs: Metering will normally be at the low side of the transformer and meter readings will be increased by 1.75%. Should the customer's requirements make it necessary for the Company to provide primary metering, the customer...

AI summary The Board approved a provision regarding metering costs, specifying that metering is typically located on the low side of the transformer with a 1.75% reading increase. If a customer's requirements necessitate primary metering instead of secondary metering, the customer must provide a capital contribution for the additional costs. Furthermore, any special metering or communication systems required for a customer to take service under the specific rate must be paid for by the customer as a capital contribution.

Availability
Availability - (1) This voluntary tariff is available in its first year to customers who are eligible for ELIIR. Beyond that, subject to the success of the rate, it will be available to all industrial customers who also qualify for NSPI' s...

AI summary The text outlines the availability and conditions for a voluntary tariff. In its first year, it is restricted to customers eligible for ELIIR, with plans to expand to all industrial customers qualifying for the NSPI Large Industrial Rate. It specifies that customer-owned generation must be accounted for in CBL constructions. Additionally, it notes that the 2P-RTP and lP-RTP rates cannot be used concurrently, and customers must commit to a minimum twelve-month service period.

Annual Hourly Load Shape (AHLS)
Annual Hourly Load Shape (AHLS) The AHLS is a load shape defining one full year of energy consumption, using 8760 (8784) hours of the individual customer's usage in KWh per hour, based on customary use in absence of any identifiable load s...

AI summary The text defines the Annual Hourly Load Shape (AHLS), which represents a full year of energy consumption in kilowatt-hours per hour based on customary usage without load-shifting behaviors. For existing customers, the AHLS may be based on historical data, though they may propose alternative methods if they can prove the results are reasonably representative. For new customers, Nova Scotia Power International (NSPI) will construct an AHLS based on industry-type data unless the customer proposes a representative alternative.

NOVA SCOTIA POWER INCORPORATED TWO PART REAL TIME PRICING TARIFF
NOVA SCOTIA POWER INCORPORATED TWO PART REAL TIME PRICING TARIFF TARIFF HAS BEEN DISCONTINUED APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE:

AI summary The document serves as a formal notice that the Two Part Real Time Pricing (2P-RTP) tariff for Nova Scotia Power Incorporated has been discontinued. The action was approved by the Nova Scotia Utility and Review Board. No specific reasons for the discontinuation or effective dates are provided in this specific excerpt.

AHLS Base Cost (AHLSbc)
AHLS Base Cost (AHLSbc) This is the total monthly charge (in dollars), calculated by applying the customer's qualifying alternative rate ("QAR") to the unaltered billing determinants from the Annual Hourly Load Shape. This pre-determined c...

AI summary The text defines the Annual Hourly Load Shape Base Cost (AHLSbc), which is a pre-determined monthly charge for customers on qualifying alternative rates (QAR). Unlike energy charges, the AHLSbc is payable regardless of actual energy consumption during a billing period. It is calculated by applying the customer's QAR to the unaltered billing determinants of the Annual Hourly Load Shape, which includes both demand charges and energy charges based on the full 8760 (or 8784) hour load shape.

Qualifying Alternative Rate (QAR)
Qualifying Alternative Rate (QAR) This is the customer's most economic alternative tariff (or tariffs) that would be applicable to the Annual Hourly Load Shape.

AI summary The document defines the Qualifying Alternative Rate (QAR) as the most economically viable alternative tariff option available to a customer based on their specific Annual Hourly Load Shape. This definition serves as a baseline for determining competitive and fair rate structures within the regulatory framework.

TWO PART REAL TIME PRICING TARIFF
TWO PART REAL TIME PRICING TARIFF Projections of the anticipated hourly energy price (week ahead and day ahead) will be provided to the customer according to the following schedule: - By midnight each day, hourly price forecasts for each h...

AI summary The document outlines the notification and billing procedures for the Two Part Real Time Pricing (2P-RTP) tariff. It specifies that hourly energy price forecasts for the upcoming seven days must be provided to customers by midnight each day, with immediate notification of major changes. Furthermore, it establishes that the actual price applied for billing is the marginal cost forecast provided 20 minutes prior to each hour.

Incremental Shift Charges
Incremental Shift Charges The Incremental Shifted Load (ISL) each hour, multiplied by the marginal price, adjusted for losses, in that hour, and summed to produce the Incremental Shift Charge (ISC). APPROVED: NOV A SCOTIA UTILITY AND REVIE...

AI summary The text defines the calculation for the Incremental Shift Charge (ISC), which is derived by multiplying the Incremental Shifted Load (ISL) by the marginal price for each hour, adjusted for losses, and then summing these values. This specific tariff was approved by the Nova Scotia Utility and Review Board effective January 1, 2006, for Nova Scotia Power Incorporated's Two Part Real Time Pricing Tariff. However, the document notes that this tariff has since been discontinued.

Loss Adjustment
Loss Adjustment Loss adjustment factors will be applied to the ISLand the DSL. These loss adjustments will be equal to the adjustments in the 1P-RTP.

AI summary The text specifies that loss adjustment factors will be applied to the Intermediate Service Load (ISL) and the Distribution Service Load (DSL). It further clarifies that these loss adjustments are required to be equal to the adjustments applied to the 1P Real Time Pricing (1P-RTP) rate.

Standard Practice of Setting a CBL
Standard Practice of Setting a CBL The customer will be able to choose, depending on his specific load shape and operational requirements, an 8760 (8784) hour CBL Shape based on either of the following: The exact one year historic load sha...

AI summary The document outlines the standard practice for establishing a Customer Billing Line (CBL) shape for customers under the Two Part Real Time Pricing tariff. It specifies two options for customers: using an exact one-year historic load shape (adjusted for seasonality and maintenance) from a period prior to load-shifting behaviors, or developing a custom Annual Hourly Load Shape, provided the customer can demonstrate that the custom shape reasonably represents actual annual load data.

Term of the CBL
Term of the CBL The CBL will be set for five years, subject to modification as set out in the rate, or as may otherwise be agreed with NSPI.

AI summary The text specifies the duration of the Customer Billing Line (CBL), stating that it will be established for a five-year term. It notes that this term is subject to potential modification as outlined in the rate application or through mutual agreement with Nova Scotia Power International (NSPI).

Modification of Existing CBL
Modification of Existing CBL If an existing 2P-RTP customer undertakes significant physical plant modification, (as signified by a specific capital expenditure above and beyond normal annual capital spending) or other material change (such...

AI summary The text outlines the conditions under which the Customer Billing Line (CBL) for 2P Real Time Pricing (2P-RTP) customers may be modified. Adjustments can be proposed by the Company or the customer due to significant physical plant modifications, capital expenditures, or material changes in product lines. Additionally, the CBL may be lowered or suspended in cases of significant load reductions. The annual energy consumption component of the CBL can be reset yearly by mutual agreement, with the UARB serving as the adjudicator for any disputes.

Order in which Rates are Applied
Order in which Rates are Applied With respect to the "stacking order" under which customers taking multiple rates are billed, no other rate may be taken above this rate. APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE: JANUARY 1,...

AI summary The Nova Scotia Utility and Review Board established a 'stacking order' for customers who utilize multiple rates simultaneously. The order stipulates that no rate may be applied above a specific designated rate, ensuring a clear hierarchy in how multiple rate components are billed to customers.

Rate Mechanism
Rate Mechanism The intent of this rate is to create a mechanism enabling customers to gain benefit equal to the benefit created by altering load usage in accordance to hourly pricing signals. The customer will be billed based on his pre-de...

AI summary The text describes a rate mechanism designed to reward customers for shifting their electricity load in response to hourly pricing signals. Under this mechanism, customers are billed based on a pre-determined Annual Hourly Load Shape (AHLS) at a Qualifying Alternative Rate (QAR). Credits are issued for energy usage below the Customer Billing Line (CBL), while costs are applied for usage exceeding the CBL. Deviations from the CBL are billed or credited based on the 20-minute ahead Real Time Price.

Relationship with ELIIR
Relationship with ELIIR Because of the unique nature of ELIIR, the calculation of the CBLbc is more complex when the customer's QAR is ELIIR. The calculation of the CBLbc in that case is as follows:

AI summary The document describes the specific methodology for calculating the Customer Billing Line base cost (CBLbc) for customers under the Energy Literacy and Inclusion Initiative (ELIIR). It notes that due to the unique nature of the ELIIR program, the calculation for these customers is more complex than standard rate structures and provides a specific formulaic approach for these cases.

Upper ELIIR and Lower ELIIR Thresholds (UET and LET)
Upper ELIIR and Lower ELIIR Thresholds (UET and LET) These are the upper and lower demand boundaries, expressed in kW, for load taken under the ELIIR rate, as defined in the ELIIR tariff. The difference between the UET and the LET is the T...

AI summary The text defines the Upper ELIIR Threshold (UET) and Lower ELIIR Threshold (LET) as demand boundaries in kW for loads under the ELIIR rate. The difference between these thresholds constitutes the Tariff Demand (TD). It specifies that when 2P-RTP is used with ELIIR, NSPI must approve the TD. If NSPI rejects a proposed TD, the utility bears the burden of proving that the rejection is necessary to prevent significant problems or inequities.

Forecast ELIIR Cost (FEC)
Forecast ELIIR Cost (FEC) This is the customer's anticipated ELIIR cost as determined in the Fall of each year preceding the active rate year. It is based on the cost that results from using the UET and the monthly ELIIR load factors that...

AI summary The document describes the methodology for calculating the Forecast ELIIR Cost (FEC), which represents the customer's anticipated cost for the Energy Literacy and Inclusion Initiative. The FEC is determined annually in the fall based on the Upper ELIIR Threshold (UET), monthly ELIIR load factors, and energy consumption between the Lower ELIIR Threshold (LET) and the UET under the Customer Billing Line (CBL). An example calculation is provided illustrating how the ELIIR rate and energy volume are multiplied to derive the FEC.

CBL Base Rate (CBLbr)
CBL Base Rate (CBLbr) This is the CBLbc divided by the energy forecast to be consumed between the UET and the CBL. (In the above example, it is the $286,200 7 4.2 GWh, or $68.14/MWh). APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTI...

AI summary The document defines the Customer Billing Line base Rate (CBLbr) as the Customer Billing Line base cost (CBLbc) divided by the energy forecast consumed between the Upper ELIIR Threshold (UET) and the CBL. It provides a specific calculation example resulting in a rate of $68.14/MWh. The text notes that this was approved by the Nova Scotia Utility and Review Board for the Nova Scotia Power Incorporated Two Part Real Time Pricing Tariff, which has since been discontinued.

Actual ELIIR Rate (AER)
Actual ELIIR Rate (AER) The ¢/kWh rate, as calculated using the currently effective ELIIR tariff, using the LET and UET and the load factor resulting from the actual load profile between those limits for each month.

AI summary The document defines the methodology for calculating the Actual ELIIR Rate (AER). This rate is expressed in ¢/kWh and is derived from the currently effective ELIIR tariff. The calculation specifically utilizes the Lower ELIIR Threshold (LET), the Upper ELIIR Threshold (UET), and the load factor determined by the actual load profile recorded between those specific limits for each month.

Special Conditions
Special Conditions - 1. During periods of economic interruption, where the customer does not buy through, both the CBL and UET will be lowered by the amount of load interruption requested by NSPI. Any load reduction below this adjusted UET...

AI summary This document outlines special conditions for the Two Part Real Time Pricing (2P-RTP) tariff, specifically regarding the Energy Literacy and Inclusion Initiative (ELIIR). It establishes rules for adjusting the Customer Billing Line (CBL) and Upper ELIIR Threshold (UET) during economic interruptions or supply disruptions caused by system conditions. It also specifies how energy consumption above the CBL is priced during interruptions and defines which threshold governs the Customer's Alternative Cost (CAC) when calculating ELIIR rates.

ENERGY CHARGE
ENERGY CHARGE 10.96 cents per kilowatt hour for all metered kilowatt hours per month.

AI summary The document specifies a set energy charge of 10.96 cents per kilowatt-hour for all metered kilowatt-hours per month.

AVAILABILITY
AVAILABILITY This rate is available to all outdoor recreational lighting for the period May through October only. APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE: MARCH 10, 2006

AI summary The document specifies the availability of a particular rate, clarifying that it is applicable exclusively to outdoor recreational lighting. The rate is restricted to a specific seasonal window, spanning from May through October. The provision was approved by the Nova Scotia Utility and Review Board and became effective on March 10, 2006.

AVAILABILITY
AVAILABILITY This rate is available to all outdoor recreational lighting for the period May through October only. APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE:

AI summary The document specifies the availability of a particular rate, noting that it is applicable exclusively to outdoor recreational lighting during the months of May through October.

(1) INCANDESCENT
(1) INCANDESCENT Rate Code Watts kW.h/Mo. $/Mo. Other 001 300 and less 97 $18.66 002 Greater than 3 00 154 27.06 (2) MERCURY VAPOUR Rate Code Watts kW.h/Mo. $/Mo. Other 100 100 43 $ 10.65 101 125 52 12.31 201 125 52 8.89 Oper. & Maint. Onl...

AI summary The document provides a detailed pricing schedule for two types of lighting systems: Incandescent and Mercury Vapour. It lists specific rate codes, power ratings in Watts, estimated monthly kilowatt-hour (kW.h/Mo.) usage, and associated monthly costs in dollars. For Mercury Vapour systems, the table distinguishes between standard rates and 'Operations & Maintenance Only' rates, as well as 'Continuous Operation' pricing.

(3) FLUORESCENT
(3) FLUORESCENT Rate Code Bulb Length Number of Bulbs/Unit kW.h!Mo. $/Mo. Other 110 24 2 30 $ 13.30 217 48 1 49 11.20 Oper. & Maint. Only 111 48 2 85 20.11 218 48 2 85 15.38 Oper. & Maint. Only 116 48 4 166 30.47 216 48 4 166 24.77 Oper. &...

AI summary The document provides a detailed breakdown of monthly kilowatt-hour (kW.h) consumption and associated monthly costs for various fluorescent lighting configurations. It categorizes these rates based on bulb length, quantity per unit, and operational modes, specifically distinguishing between 'Continuous Burning' and 'Photocell Operation' for operating-only costs. A crosswalk table is provided to compare different rate codes for these specific lighting applications.

(5) LOW PRESSURE SODIUM
(5) LOW PRESSURE SODIUM Rate Code Watts kW.h/Mo. $/Mo. Other 132 90 45 $14.21 130 135 60 16.35 131 180 80 19.17 231 180 80 13.63 Oper. & Maint. Only (6) HIGH INTENSITY SODIUM Rate Code Watts kW.h/Mo. $/Mo. Other 123 70 32 $10.99 222 70 32...

AI summary The document provides a schedule of rate codes, wattage, monthly kilowatt-hour (kW.h/Mo.) consumption, and monthly costs ($/Mo.) for specific lighting categories. These categories include Low Pressure Sodium, High Intensity Sodium, and Metallic Additive lighting. The data distinguishes between standard rates and 'Oper. & Maint. Only' rates for several high-intensity sodium options.

(5) LOW PRESSURE SODIUM
(5) LOW PRESSURE SODIUM Rate Code Watts kW.h!Mo. $/Mo. Other 132 90 45 $23.84 130 135 60 25.58 131 180 80 29.40 231 180 80 17.56 Oper. & Maint. Only (6) HIGH PRESSURE SODIUM Rate Code Watts kW.h!Mo. $/Mo. Other 123 70 32 $11.37 222 70 32 6...

AI summary The document provides a detailed schedule of approved monthly rates for various lighting technologies, specifically Low Pressure Sodium, High Pressure Sodium, and Metallic Additive systems. The tables specify the rate codes, wattage, monthly kilowatt-hour (kW.h) consumption, and the corresponding monthly costs in dollars. It also distinguishes between standard rates and those applicable for 'Operations & Maintenance Only' or 'Continuous Operation'.

(8) LIGHT EMITTING DIODE (LED) LESS THAN 30 WATTS FOR TRAFFIC CONTROL SIGNALS ONLY
(8) LIGHT EMITTING DIODE (LED) LESS THAN 30 WATTS FOR TRAFFIC CONTROL SIGNALS ONLY Rate Code $/Mo. Other 530 531 $0.27 $0.44 Non - Continuous Continuous APPROVED: NOV A SCOTIA UTILITY AND

AI summary The document presents a specific rate schedule for Light Emitting Diodes (LEDs) with a power rating of less than 30 watts, intended exclusively for traffic control signals. The table specifies monthly rates of $0.27 for non-continuous use and $0.44 for continuous use. The rates were approved by the Nova Scotia Utility and [Board].

DEMAND CHARGE
DEMAND CHARGE $8.41 per month per kilowatt of connected load.

AI summary The document specifies the demand charge rate, which is set at $8.41 per month per kilowatt of connected load.

ENERGY CHARGE
ENERGY CHARGE - 9.56 cents per kilowatt hour for the first 200 kilowatt hours per month per kilowatt of connected load. - 6.32 cents per kilowatt hour for all additional kilowatt hours.

AI summary The document specifies the energy charge structure for a utility service. It establishes a tiered pricing model where the first 200 kilowatt-hours per month per kilowatt of connected load are billed at 9.56 cents per kilowatt-hour, while all subsequent kilowatt-hours are billed at a reduced rate of 6.32 cents per kilowatt-hour.

MAINTENANCE CHARGE: (if applicable)
MAINTENANCE CHARGE: (if applicable) Cost of normal fixture maintenance and bulb replacement on the basis of current cost levels shall be used to calculate the monthly maintenance charge. This portion of the rate does not include any provis...

AI summary The text specifies the methodology for calculating the monthly maintenance charge, which is based on current cost levels for normal fixture maintenance and bulb replacement. It explicitly excludes costs associated with globe washing or cleaning from this charge. Furthermore, it establishes that any repairs or replacements of parts or bulbs resulting from vandalism are the responsibility of the customer and will be charged accordingly.

AVAILABILITY:
AVAILABILITY: This rate shall be applicable to the supply, operation and maintenance of lighting units not provided for under the Street and Area Lighting rate. APPROVED: NOV A SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE: MARCH 10, 2006

AI summary The document specifies the applicability of a specific rate for the supply, operation, and maintenance of lighting units that are not covered under the Street and Area Lighting rate. It was approved by the Nova Scotia Utility and Review Board and became effective on March 10, 2006.

ENERGY CHARGE
ENERGY CHARGE 10.28 cents per kilowatt hour for the first 200 kilowatt hours per month per kilowatt of connected load. 6. 79 cents per kilowatt hour for all additional kilowatt hours.

AI summary The document specifies the energy charge rates for electricity consumption. It establishes a two-tiered pricing structure: a lower rate of 10.28 cents per kilowatt-hour for the first 200 kilowatt-hours per month per kilowatt of connected load, and a higher rate of 6.79 cents per kilowatt-hour for all additional kilowatt-hours consumed beyond that threshold.

MAXIMUM PER KW.H CHARGE/MINIMUM BILL
MAXIMUM PER KW.H CHARGE/MINIMUM BILL The maximum charge per kW.h will be that for a billing load factor of 10% except that the minimum monthly bill for the electric power and energy portion of the Miscellaneous Lighting Rate shall be $12.6...

AI summary The text outlines the pricing structure for the Miscellaneous Lighting Rate, specifically defining the maximum charge per kW.h based on a 10% billing load factor. It establishes a minimum monthly bill of $12.65 for unmetered service billed separately. Additionally, it specifies that capital charges are based on 25-year depreciation and long-term interest rates, while maintenance charges reflect current costs for bulbs and fixtures, excluding globe washing and vandalism repairs.

AVAILABILITY:
AVAILABILITY: This rate shall be applicable to the supply, operation and maintenance of lighting units not provided for under the Street and Area Lighting rate. APPROVED: NOVA SCOTIA UTILITY AND REVIEW BOARD EFFECTIVE:

AI summary The text specifies the applicability of a specific rate for the supply, operation, and maintenance of lighting units. It clarifies that this rate is intended for lighting units that are not already covered under the existing Street and Area Lighting rate.

DEMAND CHARGE
DEMAND CHARGE $8.41 per month per kilowatt of connected load.

AI summary The document specifies the monthly demand charge rate, which is set at $8.41 per month per kilowatt of connected load.

ENERGY CHARGE
ENERGY CHARGE - 9.56 cents per kilowatt hour for the first 200 kilowatt hours per month per kilowatt of connected load. - 6.32 cents per kilowatt hour for all additional kilowatt hours. The flat rate calculation (using a 30 day month) will...

AI summary The document specifies the energy charge structure for a service, detailing a tiered pricing model based on kilowatt-hour (kWh) consumption. The first 200 kWh per month per kilowatt of connected load are charged at 9.56 cents per kWh, while any additional consumption is billed at a reduced rate of 6.32 cents per kWh. The calculation assumes a 30-day month and the final charge is rounded to the nearest hundredth of a cent.

AVAILABILITY:
AVAILABILITY: A flat rate shall be calculated for any service requiring the supply of power and energy only, with a predeterminable usage, and where metering is considered to be impractical, such as: Telephone Booths, Cable Vision Power Su...

AI summary The text establishes a regulatory requirement for a flat rate to be calculated for services that provide power and energy with predeterminable usage in locations where metering is impractical. Examples of such services include telephone booths, cable vision power supplies, traffic control lights, police telephones, and railway signals. This provision was approved by the Nova Scotia Utility and Review Board effective March 10, 2006.

N-1-aAppendix F - Load Forecast Report (Large File - 16 MB) 7 passages
21 Small General
21 Small General 22 23 In the past, this class has comprised commercial sector customers whose annual energy 24 consumption was less than 12,000 kWh. In January 2004, by UARB Order in the fall of 2002, 25 this availability threshold increa...

AI summary The text describes the historical evolution of the 'Small General' customer class, which includes commercial customers with annual energy consumption below a specific threshold. In 2004 and 2005, the UARB increased the threshold from 12,000 kWh/yr to 22,000 kWh/yr and then to 32,000 kWh/yr, respectively. This migration shifted customers from the General class to the Small General class, resulting in significant sales volume growth between 2003 and 2005, with a forecast of 2% annual growth by 2007.

25 Medium Industrial
25 Medium Industrial 26 - 27 This class is applicable to any industrial customer having a regular demand of at least 250 kV A, - 28 but less than 2,000 kV A. As of December 2005, there were 225 customers in this class, - 29 representing ab...

AI summary The text defines the 'Medium Industrial' customer class for Nova Scotia Power Inc. (NSPI). This class applies to industrial customers with a regular demand between 250 kVA and 2,000 kVA. As of December 2005, there were 225 customers in this category, accounting for approximately 4.8 percent of total NSPI sales. The class is projected to experience an average annual sales growth of 2.0 percent over the subsequent 10-year period.

1 Large Industrial
1 Large Industrial 2 3 This class is available to larger industrial customers having a regular demand of 2,000 KV A or 4 more. As of December 2005, there were six customers in the "firm load" category. Customers 5 in this class may choose...

AI summary This section describes the Large Industrial rate class, which is available to customers with a regular demand of 2,000 kVA or more. It details the 'Large Industrial Interruptible Rider,' which allows customers to opt for a portion of their load to be interruptible in exchange for a reduction in demand charges. The text provides historical and projected energy sales data for this class, noting that as of 2005, the class represented approximately 8.6 percent of total NSPI energy sales.

19 Extra Large Industrial Interruptible Rate (ELIIR)
19 Extra Large Industrial Interruptible Rate (ELIIR) 20 - 21 This rate is calculated annually in advance and based on NSPI' s budgeted base load costs. It is - 22 optionally available to, and currently in use by, two large industrial custo...

AI summary The Extra Large Industrial Interruptible Rate (ELIIR) is an annual rate based on Nova Scotia Power Inc.'s (NSPI) budgeted base load costs. It is available to large industrial customers who commit more than 20 MW of load and are served at 138KV or more. The rate is designed to reward high monthly load factors and includes an economic interruptibility provision, with priority interruptibility from a supply perspective. ELIIR accounted for approximately 16 percent of NSPI sales in 2005 and is scheduled to be replaced in 2007.

12 Two-Part Real Time Price (2P-RTP)
12 Two-Part Real Time Price (2P-RTP) 13 14 By its September 28, 2006 Decision in the matter of replacing the ELIIR rate, the UARB 15 directed NSPI to modify the formerly approved 2P-RTP to incorporate aspects contained in that 16 Decision....

AI summary The text discusses the modification of the Two-Part Real Time Price (2P-RTP) for the Extra Large Industrial Interruptible Rate (ELIIR). Following a September 28, 2006 Decision by the Utility and Rate Board (UARB), Nova Scotia Power Inc. (NSPI) was directed to revise the 2P-RTP to incorporate specific aspects of that Decision. NSPI is scheduled to file the revised rate on October 16, 2006, though specific rate details and associated load remain uncertain at the time of writing.

19 Extra Large Industrial Interruptible Rate- 2 (ELIIR-2)
19 Extra Large Industrial Interruptible Rate- 2 (ELIIR-2) 20 21 By its September 28, 2006 Decision in the matter of replacing the ELIIR rate, the UARB 22 directed NSPI to modify the existing ELIIR rate to incorporate aspects contained in t...

AI summary The text discusses the transition of the Extra Large Industrial Interruptible Rate (ELIIR-2). Following a September 28, 2006 Decision by the Utility and Rate Board (UARB), Nova Scotia Power Inc. (NSPI) was directed to modify the existing ELIIR rate to incorporate specific elements from that Decision. NSPI is scheduled to file the revised rate on October 16, 2006, though specific details regarding the rate and associated load remained uncertain at the time of writing.

1 Non Firm Coincident Peak
1 Non Firm Coincident Peak 2 3 NSPI offers interruptible, or "non-firm" service to industrial customers who meet certain criteria 4 and contract to have their electricity supply interrupted on short notice in order to meet any 5 necessary...

AI summary Nova Scotia Power Inc. (NSPI) provides non-firm, interruptible electricity services to industrial customers to facilitate emergency peak reductions. These services are offered under specific rate classes, including the Generation Replacement and Load Following rate, the Extra Large Industrial Interruptible rate, and the Interruptible rider. As of January 2005, 30 customers were enrolled, totaling a coincident non-firm peak of 392 MW. Forecasts assume moderate growth based on current customer retention and historical trends.

N-1-aAppendix A - Financial Tables - REDACTED 2 passages
Table 6
Table 6 (1) (2) (3) Compliance (4) Present (5) Proposed 2 Rates Rates Rates Actual 2005 Forecast 2006 Test Year Forecast 2006 Test Year Forecast 2007 Test Year Forecast 2007 3 Residential $476.1 $481.6 $524.8 4 5 General 6 Small general 7...

AI summary The provided text is a table (Table 6) outlining rate forecasts for various customer classes, including residential, small industrial, medium industrial, and large industrial. It compares the Test Year Forecast for 2006 against the Test Year Forecast for 2007. The data indicates proposed rate increases for several industrial categories and a notable increase for the residential class from $481.6 in the 2006 forecast to $524.8 in the 2007 forecast.

Table 7
Table 7 2007 Financial Outlook (1) (2) (3) (4) (5) Compliance Present Proposed 2 Rates Rates Rates Test Year Test Year Test Year Actual Forecast Forecast Forecast Forecast 2005 2006 2006 2007 2007 3 Residential 4,199.5 4,257.5 4,257.5 4 5...

AI summary The document presents Table 7, which provides a financial outlook for the year 2007. It compares actual results from 2005, forecasts for 2006, and both compliance and proposed forecasts for 2007 across various customer categories. These categories include residential, small industrial, medium industrial, large industrial, and other segments such as municipal and unmetered services. The data serves as a basis for evaluating rate forecasts and financial planning.

N-2-aRIRs 40 to 69 - NSUARB to NSPI - REDACTED (Large File - 34 MB) 6 passages
RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: UARB Question IR-48: Reference Page 159, lines 11-12 Will there be any revisions and if so, when will they be filed? Response IR-48: At the time of filing NSPI's Direct Evidence the UARB had n...

AI summary Nova Scotia Power Inc. (NSPI) acknowledges that revisions to the 2007 Revenue Requirement are necessary following the DARB's decision regarding the replacement for the Extra Large Industrial Interruptible Rate (ELIIR). The revisions will account for the specific fuel forecast associated with the Extra Large Industrial Two Part Real Time Pricing Rate (2P-RTP) and the required flat line Customer Baseline Loadshape (CBL). NSPI notes that the current application reflects an incorrect historical loadshape and that the final revision calculation is pending.

Response IR-48: (cont'd)
Response IR-48: (cont'd) would reflect the cost of the fuel required to serve the resulting system load shape. If the customers maintain their established flat load shape (CBL), NSPI will incur and the customer will pay the full cost of fu...

AI summary Nova Scotia Power Inc. (NSPI) argues that a revision to the revenue requirement is necessary to accurately reflect fuel costs associated with a flat Customer Base Load (CBL) shape under the ELI 2P-RTP tariff. The current evidence incorrectly uses historical load shapes for fuel cost calculations. NSPI seeks a true-up mechanism to align load shifting debits and credits with incremental and decremental fuel costs, ensuring the tariff functions as intended by the UARB without requiring a full revision to the Rate Application.

RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: UARB Question IR-50: Reference Pages 168-173. Please prepare a modified version of Figure 9.4 assuming that the RIC ratio for General Demand is held to 106.95 percent and all other ATL rates r...

AI summary The Utility and Rate Board (UARB) requested a modified version of Figure 9.4 from Nova Scotia Power Inc. (NSPI) to reflect a specific RIC ratio for General Demand (106.95 percent) with equal percentage increases for other Above the Line (ATL) rates. NSPI provided the modified figure but noted that the Unmetered class was not adjusted in the same manner as other ATL classes, citing specific reasons provided in the Revenue Section of their Application.

Response IR-50: ( cont' d)
Response IR-50: ( cont' d) Figure 9.4 Modified RIC Ratio /o Revenue 0 Increase Proposed Revenue ABOVE-THE-LINE CLASSES Residential 98.6% 8.4% $522.3 Commercial Small General 101.8% 8.4% $30.5 General Demand 107.0% 5.4% $257.5 Large General...

AI summary The document provides a detailed breakdown of the proposed revenue requirement for various customer classes, categorized into 'Above-the-line' and 'Below-the-line' groups. It includes specific figures for RIC (Rate Impact Cost) ratios, revenue increases, and proposed revenue for residential, commercial, industrial, municipal, and unmetered classes. The data indicates a total proposed revenue of $1,121.6 million with a calculated revenue shortfall of $0.0.

Proof of Revenue (Column 3, Table 6, Appendix A)
Proof of Revenue (Column 3, Table 6, Appendix A) First Energy in GWh Per KWh Charge Secon Energy in GWh nd KWh Per KWh Charge Con Contract 0.0000000000000000000000000000000000000 Per KWh Total K WHs Revenue Dema Charge KW or h per F Revenu...

AI summary The document provides a detailed financial breakdown of revenue calculations for various electricity customer classes, including Residential (Domestic Service and Time of Day) and Commercial sectors (Small General, General, and Large General). It outlines specific energy consumption in GWh, per-kilowatt-hour charges, demand charges, and total revenue figures. The data serves as proof of revenue, specifically detailing 'Above-the-line' charges and recast rates for different service categories.

Proof of Revenue (Column 4, Table 6, Appendix A)
Proof of Revenue (Column 4, Table 6, Appendix A) First Energy in GWh KWh Bl Per KWh Charge ock Revenue Seco Energy in GWh nd KWh Per KWh Charge e Energy ird KWh Per KWh Charge ck venue Total E gy evenue GWS or GVAS Demand Charge per KW or...

AI summary The document provides a detailed breakdown of revenue proof for various customer sectors, including Residential (Non-ETS and ETS), Small General Commercial, and Large General Commercial. It lists specific metrics such as GWh, KWh charges, gross revenue, energy volume, and demand charges. The data distinguishes between customers with and without transmission ownership, providing a basis for calculating revenue requirements and cost recovery across different service classes.

N-2-bRIRs 70 to 75 - NSUARB to NSPI - REDACTED (Large File - 33 MB) 9 passages
RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: UARB Question IR-74: Appendix H: Please file the two 2007 proposed ELIIR tariffs. Response IR-74: See Attachment 1. This attachment contains the present (2006) and proposed (2007) Extra Large...

AI summary The UARB responded to NSPI's request for the two 2007 proposed ELIIR tariffs by providing the 2006 and proposed 2007 ELI 2P-RTP tariff, noting that the ELIIR-2 tariff is not required as eligible customers have opted for the ELI 2P-RTP rate.

AVAILABILITY:
AVAILABILITY: - 1. This tariff is available to customer load formerly served under the Extra Large Industrial Interruptible Rate (ELIIR) and 2P-RTP tariffs, specifically that of StoraEnso Port Hawkesbury Ltd (StoraEnso ), and Bowater Merse...

AI summary This tariff applies to specific industrial customers previously under ELIIR and 2P-RTP tariffs, with conditions on voltage, priority interruption, and exclusivity. Customers must commit to the tariff for at least twelve months and cannot use it with the lP-RTP rate.

Customer Baseline Load (CBL)
Customer Baseline Load (CBL) This is a flat line load shape used for the operational purpose of calculating hourly Incremental Load (IL) and Decremental Load (DL). The CBL level (in MW) is to be calculated as the average hourly demand of t...

AI summary The Customer Baseline Load (CBL) is a flat line load shape used to calculate hourly Incremental Load (IL) and Decremental Load (DL). It is based on the average hourly demand from the customer's annual forecast total energy requirement, excluding system losses, and is calculated annually from January 1st to December 31st.

Marginal Cost (MC)
Marginal Cost (MC) The MC will be the 20-minute ahead forecast of hourly marginal fuel and variable O&M cost in any hour, excluding any impacts of electricity exports, but including imports when they impact marginal costs. The MC forecast...

AI summary The Marginal Cost (MC) is defined as the 20-minute ahead forecast of hourly marginal fuel and variable O&M costs, excluding electricity exports but including imports. NSPI calculates the MC forecast based on in-province load requirements, and projections are provided to customers daily and updated for major changes. The actual billing price is the MC adjusted according to the Decremental Rebate section of the tariff.

EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP)
EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP) In recognition that this tariff will receive interruption calls in advance of Interruptible Rider customers, the ELI 2P-RTP tariff will receive an interruptible credit (...

AI summary The ELI 2P-RTP tariff is designed to receive a 15% higher interruptible credit compared to Interruptible Rider customers, as determined by NSPI's COSS, due to the expectation of receiving interruption calls in advance.

Marginal Cost (MC)
Marginal Cost (MC) The MC will be the 20-minute ahead forecast of hourly marginal fuel and variable O&M cost in any hour, excluding any impacts of electricity exports, but including imports when they impact marginal costs. The MC forecast...

AI summary The document defines marginal cost (MC) as a 20-minute ahead forecast of hourly fuel and variable O&M costs, excluding electricity exports but including imports when they affect marginal costs. The MC forecast is calculated by NSPI based on in-province load requirements and is used for billing purposes, adjusted by the Decremental Rebate section of the tariff.

EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP)
EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP) DL will be credited according to the following schedule: - The credit for decrements, up to 30 MW for Bowater, and 75 MW for StoraEnso will be at MC as defined by this t...

AI summary The ELI 2P-RTP tariff outlines how decremental load (DL) is credited for Bowater and StoraEnso, with different rates depending on the amount of decrement. Credits are based on a percentage of the marginal cost (MC) or the standard energy charge, with a 20% limit on eligible decremental load relative to the customer's annual CBL energy.

EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP)
EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP) CBL Base Cost (CBLbc) The CBLbc is the monthly cost of energy under the CBL. It is calculated according to the following formula: Monthly CBLbc = (Standard Energy Charge...

AI summary The document outlines the calculation of the CBL Base Cost (CBLbc) under the ELI 2P-RTP tariff, which is determined by multiplying the Standard Energy Charge by the annual energy under CBL and dividing the result by 12.

Sole Supplier
Sole Supplier NSPI reserves the right to be the sole supplier of all external power requirements (i.e. excluding self-generation) for customers taking service under this tariff.

AI summary NSPI retains the right to be the sole supplier of external power for customers under this tariff, excluding self-generated power.

N-2-bRIRs 77 to 84 - NSUARB to NSPI - REDACTED (Large File - 35 MB) 1 passage
Q4 Electric Sales Volume Gigawatt hours("GWh")
Q4 Electric Sales Volume Gigawatt hours("GWh") 2005 2004 2003 Residential 999 1,052 1,049 Commercial 728 754 744 Industrial 1,020 1,068 1,037 Other 144 153 119 Total 2,891 3,027 2,949 Q4 Electric Sales Revenues (millions of dollars} 2005 2...

AI summary The text provides a historical overview of Nova Scotia's electric sales volume and revenues for the years 2003 to 2005, categorized by residential, commercial, industrial, and other sectors. It notes that while electricity pricing is generally regulated, exceptions exist for Annually Adjusted Rates for large industrial customers and market-priced export sales. Sales trends are attributed to economic conditions, population, and weather, with Q1 and Q4 being peak periods due to winter weather.

N-2-cRIRs 1 to 39 - CA to NSPI - REDACTED (Large File - 14 MB) 1 passage
RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: CA Question IR-14: NSPI seeks inclusion in rates fuel costs it does not recover as a result of the operation of the ELIIR-2 RTP. Please show where in the P-883 proceeding NSPI sought this or s...

AI summary Canada Nova Scotia Electricity Corporation (CA) responds to a request from Nova Scotia Power Inc. (NSPI) regarding fuel cost recovery related to the ELIIR-2 RTP. CA argues that the Board's intention for the 2P-RTP rate is to be cost-neutral for all parties. CA supports NSPI's request for a true-up mechanism to ensure that NSPI does not under-recover fuel costs and that other customers are not financially harmed by the operation of the rate, ensuring real cost savings for 2P-RTP customers.

N-2-dRIRs 1 to 46 - CME to NSPI - REDACTED (Large File - 18 MB) 1 passage
RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: CME Question IR-2: Reference Page 5, Lines 13-18 Explain in detail how the "true up" mechanism is anticipated to work and what is incorporated therein to avoid larger lump sum payments to rman...

AI summary CME requested clarification on the 'true up' mechanism for the new Extra Large Industrial Two Part Real Time Pricing rate to ensure it reflects actual load value without creating large lump-sum payments. NSPI responded that the true-up is intended to work in both directions, benefiting both the customer and the company. NSPI proposes providing monthly status updates to the Board and customers to ensure transparency regarding year-end costs, with the option for more frequent settlements than annually.

N-2-eRIRs 1 to 7 - HRM to NSPI - REDACTED 1 passage
Response IR-7: (cont'd)
Response IR-7: (cont'd) (c) Increases to rate components within each customer class are proposed to be applied uniformly in all classes. - (d) Generation, transmission, distribution, customer and other costs are allocated to customer class...

AI summary The response outlines how rate components are uniformly applied across customer classes, how costs are allocated to classes rather than individual tariff components, and clarifies the assumptions and figures related to lighting costs. It also explains the application of load shapes and the use of the Misc. Small Loads Tariff.

N-2-fRIRs 1 to 18 - MEUNSC to NSPI - REDACTED 3 passages
Response IR-7: (cont'd)
Response IR-7: (cont'd) b.-e. The revised Generation Replacement Load Following loss factor results from a change in the way in which the Additional Energy portion ofBowater's load has been displayed. Until 2005, this energy had been taken...

AI summary The respondent explains a revision in the Generation Replacement Load Following loss factor, which stems from a change in how Bowater's 'Additional Energy' portion is categorized. Previously priced at the Load Following rate, this energy was moved to the Large Industrial rate with the Interruptible Rider following a 2004 UARB decision. While the load was moved from the GRLF class to Mersey Rate energy for reporting purposes, the respondent clarifies that the overall loss percentage for the combined Below The Line industrial load remains unchanged.

Question IR-8: Reference: Direct Evidence Page 172, Lines 2-5
Question IR-8: Reference: Direct Evidence Page 172, Lines 2-5 - a. The approach taken to recover the shortfall results in the Municipal class receiving the largest increase. Please indicate what the increases for the four affected classes...

AI summary The Information Request (IR-8) focuses on the methodology used to recover a shortfall in revenue. The intervenor questions the current approach, which results in the Municipal class receiving the largest and only double-digit increase among the A TL classes. The intervenor requests a comparative analysis of how the shortfall would be distributed if based on revenue to maintain the relativity of Rate Increase Components (RIC) across the four affected classes.

RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: MEUNSC Question IR-9: Reference: Direct Evidence Page 173, Figure 9.4 Please provide the bill determinants in support of the proposed revenues. Response IR-9: The reference is to the proposed...

AI summary The Maritime Energy Users Notice Committee (MEUNSC) submitted a response to an information request (IR-9) regarding the bill determinants supporting the proposed revenues presented by Nova Scotia Power Inc. (NSPI). The response directs the reader to the revenues by rate class shown in Figure 9.4 of NSPI's Direct Evidence and refers to a previous response provided to the Utility and Rate Board (UARB) under IR-54.

N-2-gRIRs 1 to 25 - Stutz to NSPI - REDACTED (Large File - 18 MB) 6 passages
Preamble
In the Nova Scotia Utility and Review Board's March 10, 2006 Decision (NSUARB-NSPI-P-882), the Board directed NSPI to conduct a cost of service study with respect to the Unrnetered Class. The Decision stated: 5 6 7 8 9 1 2 3 4 "This study...

AI summary Nova Scotia Power Inc. (NSPI) submitted a report in response to a 2006 Nova Scotia Utility and Review Board directive requiring a cost of service study for the Unmetered Class. NSPI proposes reducing the C-3 weighting factor from 5.0 to 2.0. The report also asserts that the current unmetered rate base is accurate, as it only includes assets owned and paid for by the company, and provides the requested breakdown of costs and assets by municipality.

2.0 THE C-3 WEIGHTED CUSTOMER ALLOCATOR
2.0 THE C-3 WEIGHTED CUSTOMER ALLOCATOR There has been discussion and debate about the use of the Cost of Service Study's C-3 Weighted Customer Allocator which is used to allocate certain customer-related expenses to ATL classes. There has...

AI summary Nova Scotia Power Inc. (NSPI) proposes a revision to the C-3 Weighted Customer Allocator used to allocate customer-related expenses to above-the-line (ATL) classes. NSPI argues that the Unmetered Class does not disproportionately cause costs in customer service head office and field areas, leading to a proposal to switch these costs to the C-1 Allocator. For Billing Services and Call Centre functions, NSPI conducted a review of effort and call volumes, proposing reduced weighting factors for the Unmetered Class based on specific analysis of LED conversions and call metrics.

19 4.5 Schedule 5 - Tax-Adjusted Weighted Average Cost of Capital
19 4.5 Schedule 5 - Tax-Adjusted Weighted Average Cost of Capital 20 21 22 23 24 25 As stated previously, using a tax-adjusted WACC is consistent with the methodology used in the development ofNSPI's currently approved OATT. The calculatio...

AI summary The document outlines the calculation of Nova Scotia Power Inc.'s (NSPI) tax-adjusted Weighted Average Cost of Capital (WACC) for 2006. The methodology is consistent with the approved Open Access Transmission Tariff (OATT). The final tax-adjusted WACC of 11.96% is derived from four components: a pretax WACC of 8.21%, additional income tax on Common Equity (2.10%), Large Corporation Tax (0.46%), and Grants-in-Lieu of Property Taxes (1.19%).

5.0 CONCLUSION
5.0 CONCLUSION In order to ensure that the three components of unmetered rates remain aligned with costs, NSPI proposes to update this Street I Crosswalk Lighting Study each time the Company files a future general rate application. The Com...

AI summary Nova Scotia Power Inc. (NSPI) proposes a methodology update for unmetered rates to ensure the three cost components remain aligned with actual costs. Instead of applying an average across-the-board rate adjustment, NSPI intends to review and revise individual cost components for specific fixture types during each future general rate application. While the official tariffs will continue to display unmetered rates as single figures, the underlying pricing will reflect these individual components. Additionally, NSPI proposes updating terminology to reflect 'High Pressure Sodium' lighting.

Section 75
Customer Costs Assigned to Unmetered Class Using C-3 Allocator:

AI summary The document segment introduces the methodology for assigning customer costs to the unmetered class. It specifies the use of the C-3 allocator as the mechanism for this cost distribution.

STREET / CROSSWALK LIGHTING STUDY
STREET / CROSSWALK LIGHTING STUDY Description Rate Code kW.h/Mo. Power & Energy Maintenance Capital 2006 New Resulting Rates 2006 New Resulting Revenue 2006 Approved Rates Percent Change Units Revenue Variance Fluorescent 2x72" 300 Watts 1...

AI summary The document presents a detailed table from a street and crosswalk lighting study, comparing various fluorescent lighting configurations. It provides data on power and energy consumption, maintenance costs, capital costs, and resulting rates and revenues for 2006. The analysis includes specific calculations for different lamp sizes (e.g., 2x72", 4x72", 1x96") and compares 'New Resulting Rates' against '2006 Approved Rates' to determine percentage changes and revenue variances.

N-7-aRIRs 85 to 104 [105 to 107 (Filed 03/05/2007)] - NSUARB to NSPI - REDACTED 1 passage
RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: UARB Question IR-92: Reference Board StaffiR-1 Please provide an update of Figure 9.1 (page 168) using the ELI-2P- RTP rates approved by the Board in P-883, i.e 55.06 $/MWh for energy. Respons...

AI summary The UARB responds to NSPI's request for an updated figure using ELI-2P-RTP rates approved by the Board in P-883. The response notes that the figure is based on the Standard Energy Charge only and does not account for net credits or increased fuel costs. NSPI has requested a true-up mechanism to align net credits with actual costs.

N-7-aRIRs 8 to 23 - HRM to NSPI - REDACTED 3 passages
Question IR-11: With respect to the responses to HRM IR-7:
Question IR-11: With respect to the responses to HRM IR-7: - a. Please respond to the original question in HRM IR-7(a) by: (i) providing the magnitude of costs included in the Misc. Small Loads Tariff by functional and classified component...

AI summary The Halifax Regional Municipality (HRM) is seeking clarification on the cost structure and rate design of the Misc. Small Loads Tariff. Specifically, HRM requests a breakdown of costs by functional and classified components (e.g., production, transmission, customer-related) and an explanation of the billing determinants for demand and energy costs. HRM also seeks to understand the impact of flat energy rates versus declining block rates and the potential for cross-subsidies between photocell-actuated and continuous-burning street lights under the current tariff structure.

Response IR-11:
Response IR-11: a. Costs are functionalized, classified and allocated to the Unrnetered class using the same cost of service study methodology used for all other classes. The Miscellaneous Small Loads rate was originally designed to be the...

AI summary Nova Scotia Power Inc. (NSPI) clarifies that costs for the Unmetered class are functionalized, classified, and allocated using the same cost of service study methodology applied to all other classes. Additionally, the company notes that the Miscellaneous Small Loads rate was originally established to be identical to the General Demand tariff.

Response IR-11: ( cont' d)
Response IR-11: ( cont' d) The two tariffs have been increased differently during each rate case proceeding since 1996. The current relationship of Unmetered costs to the rate components of the Miscellaneous Small Loads Tariff cannot be de...

AI summary The response addresses the structure of the Miscellaneous Small Loads Tariff, noting that its relationship to Unmetered costs cannot be determined due to differing tariff increases since 1996. It provides a hypothetical 2007 energy rate of 8.96 cents per KWh if the tariff used a flat energy rate instead of a declining block rate. Finally, it clarifies that the tariff's demand and energy components are not tied one-to-one to specific costs determined in the COSS, as rates are set by the Board to be cost-based at the class level.

N-7-aRIRs 27 to 39 - AEC to NSPI - REDACTED 3 passages
%Share
%Share 2006 Rate 2006 Rate Case Case Proposed Requested Year 1990 1995 2000 Present Rates Rates Available Test Year 1992 1996 2002 2007 2007 Residential 46.0% 43.7% 43.6% 43.6% 44.2% General Small General 1.6% 5.6% 1.1% 2.5% 2.5% General 2...

AI summary The document presents a comparative table of electricity rate shares for various customer classes (Residential, General, and Industrial) across multiple test years, including 1990, 1995, 2000, 2007, and a proposed rate case. It highlights the distribution of revenue across different categories such as Small General, Large General, and various Industrial segments, including specific components like ELIIR, RTP, and Mersey Basic Block.

Cost is measured in ¢/kWh ALL YEAR - Weekends & Holidays (115 days)
Cost is measured in ¢/kWh ALL YEAR - Weekends & Holidays (115 days) Time of Day Rate Base Charge: $18.62/mth Standard Residential Rata: Base Charge: $10.83/mth Energy Charge: 10.13¢/kWh (24hoursl365 days) All costs based on rates of March...

AI summary The document outlines the rate structure for residential electricity, specifically detailing the Time of Day Rate and Standard Residential Rate. It specifies a monthly base charge of $18.62 for the Time of Day Rate and $10.83 for the Standard Residential Rate. The energy charge is set at 10.13¢/kWh, applicable 24 hours a day, 365 days a year, including weekends and holidays. All costs are based on rates established on March 10, 2006.

RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: AEC Response IR-29: (cont'd) institutions are to be billed at a rate that does not exceed NSPI's Domestic Service tariff. Please refer to Attachment 1 (Section 73 of the Public Utilities Act,...

AI summary Access Energy Corporation (AEC) provides a response to an information request from Nova Scotia Power Inc. (NSPI) regarding billing rates for institutions. AEC specifies that institutions must be billed at a rate that does not exceed the Domestic Service tariff of NSPI, citing Section 73 of the Public Utilities Act as the legal basis for this requirement.

N-7-aRIRs 47 to 67 - CME to NSPI - REDACTED 3 passages
RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: CME REDACTED Question IR-48: Reference CME - IR-2 What does NSPI propose as a mechanism for dispute resolution in the event the parties disagree as to the Reconciliation Value or on a mutually...

AI summary CME provides a response to an information request regarding the dispute resolution mechanism for the ELI 2P-R TP tariff. The response clarifies that the true-up mechanism is intended to reconcile discrepancies between the credit/debit algorithm and the actual avoided or incremental costs experienced by the Company. The primary objective is to ensure that the intentions of SEB and the Board are met—specifically that no transfer of costs occurs—while ensuring fair treatment for both 2P-RTP customers and the utility.

RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: CME REDACTED Response IR-48: (cont'd) NSPI will forecast the hourly cost of serving the total system load including SEB at their CBL and will compare it to the actual cost of serving the resul...

AI summary Nova Scotia Power Inc. (NSPI) describes the methodology for calculating true-up amounts related to the Electricity Load Impact 2P-R TP (ELI2P-RTP) tariff. The process involves forecasting the hourly cost of serving total system load, including the Customer Baseline Loadshape (CBL) for the Nova Scotia Electricity Board (SEB), and comparing it to actual costs. The analysis separates SEB and non-SEB loads to determine the cost of load deviations. NSPI estimates that true-up amounts for 2007 could exceed $4 million, which would otherwise require future cost recovery from customers.

Dispute Resolution
Dispute Resolution In the event the parties do not agree, after making reasonable efforts to do so, the dispute will be referred to the UARB for determination, similar to other areas of operation ofthe ELI-2P-RTP Tariff. DATE FILED: Decemb...

AI summary The text establishes a dispute resolution mechanism for the ELI-2P-RTP Tariff. It specifies that if the involved parties are unable to reach an agreement through reasonable efforts, the dispute will be referred to the Utility Administrative Review Board (UARB) for a final determination, maintaining consistency with other operational areas of the tariff.

N-7-bRIRs 19 to 22 - MEUNSC to NSPI - REDACTED 1 passage
RESPONSE TO INFORMATION REQUEST
RESPONSE TO INFORMATION REQUEST TO: NSPI FROM: MEUNSC Question IR-20: If this wording cannot be inserted in all demand billed rates, can it be inserted in the ratcheted rates such that it would apply to ratcheted demands? If not, why not?...

AI summary The Maritime Energy Users Notice Committee (MEUNSC) submitted a response to an information request regarding the possibility of inserting specific wording into ratcheted demand rates. The committee directed Nova Scotia Power Inc. (NSPI) to refer to a previous information request (IR-19) for the detailed explanation regarding why such wording might not be applicable to all demand billed rates.

N-13Evidence of Robert D. Greneman on behalf of HRM 1 passage
US. and Other:
Tariff and no portions of the workpapers are seen as being 16 HRM IR-7(a) and HRM IR-ll(a). confidential in nature. NSPI should provide the requested workpapers prior to the commencement ofhearings. A second concern relates to the declinin...

AI summary The document discusses concerns regarding the confidentiality of workpapers and the structure of the Misc. Small Loads Tariff, including issues with declining energy block pricing and demand rates for different lighting types. It also addresses the distribution labour costs associated with street lighting maintenance.

N-40RIRs 1 to 13 - Dr. Alan Rosenberg [SEB] to NSPI 1 passage
Question No. IR-2:
Question No. IR-2: For each individual company shown in this exhibit, please provide: - a. A copy of the actual tariff used to calculate the unit cost shown or the source of the information if a tariff has not been consulted. - b. All assu...

AI summary The document outlines a series of detailed questions posed to companies regarding their tariffs, cost calculations, fuel adjustment clauses, revenue-to-cost ratios, rate differences, and regulatory approvals. The questions aim to gather comprehensive information for regulatory review.

N-40RIRs Attachment SEB-NSPI - 2d (Large File - 20 MB) 38 passages
AVAILABILITY
AVAILABILITY Same as the specific base rate schedule incorporating this Energy Cost Recovery Rate by reference.

AI summary The document section briefly addresses the availability of the Energy Cost Recovery Rate, stating that it is governed by the same conditions as the specific base rate schedule that incorporates the rate by reference.

APPLICABILITY
APPLICABILITY Applicable as an integral part of each base rate schedule of the Company in which reference is made to this Rate ECR.

AI summary The document specifies the scope of applicability for the Rate ECR, stating that it serves as an integral component of every base rate schedule of the Company that makes reference to the ECR.

GENERAL DESCRIPTION OF RATE
GENERAL DESCRIPTION OF RATE This Rate ECR is made a part of each of the base rate schedules of the Company to which Rate ECR is applicable and any modification to, amendment to or replacement of such base rate schedules. All bills rendered...

AI summary This section describes the implementation of the Rate ECR, which is integrated into the Company's base rate schedules. The Rate ECR establishes the procedure for recovering defined energy costs and determines the effective Energy Cost Recovery factor. Once calculated, this factor will be combined with other charges in the applicable rate schedule and presented to customers as a single line item on their bills.

ENERGY COST RECOVERY FACTOR CALCULATION PROCEDURE (RATE ECR FORMULA)
ENERGY COST RECOVERY FACTOR CALCULATION PROCEDURE (RATE ECR FORMULA) The Energy Cost Recovery factor to be applied to each kilowatt-hour supplied by the Company under any base rate schedule of which this Rate ECR is made a part shall be ca...

AI summary The text outlines the calculation procedure for the Energy Cost Recovery Factor (ECRF) applied to retail kilowatt-hour sales. The ECRF is determined by summing the Estimated Total Energy Cost (ETEC) and the CF ETS. The ETEC component includes three primary elements: (1) estimated fossil fuel and emission allowance costs from specific Uniform System of Accounts, (2) estimated nuclear fuel costs, and (3) estimated purchased energy costs, excluding capacity or demand charges. The formula accounts for costs at the Company's plants, shared capacity, and affiliated company operations.

Preamble
- (4) Gains, losses and costs associated with Company's utilization of futures, options and over the counter derivatives (including, without limitation, futures contracts, puts, calls, caps, floors , collars, and swaps) for the purpose of...

AI summary The text outlines the methodology for calculating the Energy Cost Recovery (ECR) factor, specifically focusing on the correction factor (CF) used to adjust prior estimates to actual data. It describes the process for calculating net under- or over-recoveries for retail customers by subtracting wholesale and retail energy cost recoveries from total energy costs. Additionally, it addresses the transition from the Fuel Tariff (FT) Energy Cost Adjustment to the ECR rate, requiring initial estimates for specific months in 1981.

USE OF RIDER
USE OF RIDER Since adjustments are already included in the Rates of the Company's current rate schedules which are effective for service on and after July 1, 2006, this Rider should not be used in addition to such rate schedules for bill c...

AI summary The document specifies that certain adjustments are already incorporated into the Company's current rate schedules, which became effective on July 1, 2006. Consequently, the Rider in question is not to be applied in addition to these existing rate schedules for the purpose of bill calculations. The text refers to a North Carolina Fifteenth Revised Leaf and a corresponding NCUC Docket Order.

APPLICABILITY
APPLICABILITY Electric service billed under rate schedules having a Fixed Fuel Factor Clause shall be subject to a Fixed Fuel Factor.

AI summary The document specifies the applicability of the Fixed Fuel Factor. It states that electric service billed under rate schedules that include a Fixed Fuel Factor Clause will be subject to the Fixed Fuel Factor.

The Fixed Fuel Factors recognize loss adjustments due to different voltage levels of service:
The Fixed Fuel Factors recognize loss adjustments due to different voltage levels of service: Energy Loss Factor Fixed Fuel Factor ($/KWH) A. Texas System 1.00000 0.03631 (I) B. Transmission Voltage (If customer is not specified below and...

AI summary The document outlines the Fixed Fuel Factors and Energy Loss Factors for the Empire District Electric Company. It specifies different fuel factors based on voltage levels of service, including transmission, primary, and secondary voltages. Additionally, it introduces the '16 YRIDER (Rider ECR)' (Energy Cost Recovery Rider), which allows the company to recover energy costs as defined in the tariff for specific rate schedules.

38.2 ENERGY COST RATE
38.2 ENERGY COST RATE The Energy Cost Rate to be initially effective under this Rider ECR shall be determined in the manner prescribed by the Arkansas Public Service Commission ("Commission") in its final order in Docket No. 96-360-U and s...

AI summary The document outlines the rules for determining and applying the Energy Cost Rate under Rider ECR. The initial rate is established based on the Arkansas Public Service Commission's final order in Docket No. 96-360-U. Subsequently, the rate is subject to annual redetermination through specific filing procedures. The rate is applied to monthly billing energy in kilowatt-hours (kWh), with an exception for special rate contracts that do not contain specific provisions for energy cost recovery.

ENERGY COST RATE FORMULA
ENERGY COST RATE FORMULA ECR ENERGY COST RATE ECR (TUA + PEC) / PES (RT) WHERE, TUA TRUE-UP ADJUSTMENT FOR THE ENERGY COST PERIOD INCLUDING CARRYING CHARGES (1) = \sum_{j=1}^{12} (EC_j - (RR_j - PTU_j)) \ (1 + CCR \ ((21 - j) / 12)) (RT) W...

AI summary The text provides the mathematical formula for the Energy Cost Rate (ECR), which is calculated by dividing the sum of the True-Up Adjustment (TUA) and Projected Energy Cost (PEC) by the Projected Energy Sales (PES). The formula specifically defines the True-Up Adjustment, which accounts for energy costs including carrying charges, and details the components of energy costs such as fuel expenses charged to specific accounts, excluding certain retained share fuel charges for the Grand Gulf project.

ENERGY COST RATE FORMULA (CONT'D)
ENERGY COST RATE FORMULA (CONT'D) = = CCR = REVENUE UNDER RIDER ECR FOR MONTH j OF THE ENERGY COST (RT) PERIOD PLUS AN IMPUTED LEVEL OF REVENUES FOR SALES (AT) UNDER SPECIAL RATE CONTRACTS WHERE THE ENERGY COST (AT) RATE IS NOT SEPARATELY...

AI summary The document provides a technical breakdown of the Energy Cost Rate formula, specifically detailing the calculation of the Carrying Charge Rate (CCR). It outlines the components of the Projected Energy Cost (PEC) for a given period, including the integration of revenues from special rate contracts, prior period true-up adjustments, and specific adjustments such as the Nuclear Refueling Outage Adjustment (NRFA). The formulas are intended to determine the rate structure for the Energy Cost (RT) period.

APPLICABILITY:
APPLICABILITY: This schedule is applicable to and becomes a part of each retail rate schedule in which reference is made to the Fuel Cost Recovery Schedule.

AI summary The document specifies the scope of the Fuel Cost Recovery Schedule, stating that it is applicable to and integrated into every retail rate schedule that makes reference to the Fuel Cost Recovery Schedule.

GENERAL TERMS & CONDITIONS:
GENERAL TERMS & CONDITIONS: The adjustment calculated under this rider is subject to change in such an amount as may be approved and/or amended by the Georgia Public Service Commission. Service hereunder subject to Rules and Regulations fo...

AI summary The document outlines general terms and conditions for a specific rider, noting that adjustments are subject to approval or amendment by the Georgia Public Service Commission. It specifies that services are governed by the Rules and Regulations for Electric Service on file with the same commission. The text also includes a notation regarding the cancellation of a previous sheet by Indiana Michigan Power Company in the State of Indiana.

22. Employees Discount.
22. Employees Discount. Regular employees who have been in the Company employ for six months or more and are the head of the family or mainly responsible for maintenance of the premises they occupy may, at the discretion of the Company, se...

AI summary The document outlines the eligibility and pricing structure for residential electric bill discounts available to regular employees of the Company. To qualify, employees must have at least six months of service and be the primary residents of their premises. Specific rates are provided for standard service, storage water-heating systems, and time-of-day (TOD) load-management devices, with the latter featuring differentiated on-peak and off-peak pricing.

23. Fuel Cost Adjustment.
23. Fuel Cost Adjustment. A. The energy charges set forth in all rate schedules and those energy charges that are either included in the capacity or demand charges of such rate schedules or in the minimum billings under such rate schedules...

AI summary The text defines the methodology for the Fuel Cost Adjustment, specifying how energy charges in all rate schedules—including capacity and demand charges or minimum billings—will be adjusted. The adjustment is calculated based on the formula (F/S) minus a constant of $0.008609 per kWh, with changes rounded to the nearest 0.001 mill per kWh.

where:
where: 1. "F" is the estimated expense of fuel based on a three-month average cost beginning with the month immediately following the current billing cycle month and consisting of the following costs: (Cont'd on Sheet No. 3.18) ISSUED BY C...

AI summary The document provides a technical definition for 'F', which represents the estimated expense of fuel based on a three-month average cost starting after the current billing cycle month. It is part of the Thirty-second Revised Sheet No. 3.18 for the Indiana Michigan Power Company, issued under the authority of the Indiana Utility Regulatory Commission. The document specifies the effective date as December 23, 1997, and identifies the issuing officer as Coulter R. Boyle, III.

TERMS AND CONDITIONS OF SERVICE
TERMS AND CONDITIONS OF SERVICE (Cont'd from Sheet No. 3.17) - (a) the average cost of fossil and nuclear fuel consumed in the Company's own plants, such cost being only those items listed in Account 151 and Account 518 (exclusive of spent...

AI summary The text outlines the technical definitions and formulas used to calculate fuel costs and energy sales for a utility's rate structure. It specifies the inclusion of fossil and nuclear fuel costs from the Federal Energy Regulatory Commission's Uniform System of Accounts, excluding spent nuclear fuel disposal costs. It also defines 'S' as the estimated kilowatt-hour sales, calculated by summing net generation, purchases, and interchange-in, while subtracting intersystem sales, energy losses, and company use.

AVAILABILITY OF SERVICE
AVAILABILITY OF SERVICE This schedule is a mandatory rider to all electric rate schedules. (1) The charge per KWH delivered under the rate schedules to which this fuel clause is applicable shall be increased or decreased during each month...

AI summary The text outlines the mandatory 'Availability of Service' fuel clause rider, which establishes the formula for monthly adjustments to the charge per KWH delivered. It defines how fuel costs (F) are calculated, including fossil fuel consumption in own plants, costs for forced generation or transmission outages, and costs for energy purchased for reasons other than economic dispatch. It specifically excludes capacity or demand charges and requires fuel costs to be based on weighted average inventory costing.

Fuel Adjustment Clause
Fuel Adjustment Clause - (4) Sales (S) shall be all KWH's sold, excluding inter-system sales. 11\/here, for any reason, billed system sales cannot be coordinated Vvith fuel costs for the billing period, sales may be equated to the sum of (...

AI summary This document excerpt outlines the technical specifications and definitions for the Fuel Adjustment Clause (FAC). It defines the calculation of 'Sales (S)' as all kilowatt-hours sold excluding inter-system sales, while specifying that utility used energy is included. It defines the 'cost of fossil fuel' as the invoice price including transportation costs per the FERC Uniform System of Accounts. Additionally, it establishes the base period ending September 2004, the current period for billing, and the effective date of the clause.

FUEL CLAUSE RIDER
FUEL CLAUSE RIDER Kingsport Power is authorized under the terms of this rider to adjust customers' bills in each applicable tariff whenever the unit cost of fuel in the charges for power purchased from Appalachian Power Company under Feder...

AI summary The Fuel Clause Rider authorizes Kingsport Power to adjust customer billing based on the fluctuating unit cost of fuel purchased from Appalachian Power Company. The adjustment is triggered when the actual fuel cost deviates from a base unit price of 15.8563 mills per KWH, adjusted for losses. Calculations are performed monthly based on the most recent available calendar month data to ensure that customers pay the actual cost of fuel for the power consumed.

Fuel Clause Adjusment ...... ........ ... .... .. ........ ..... .. ..... .... . 2.6827 mills per kWh
Fuel Clause Adjusment ...... ........ ... .... .. ........ ..... .. ..... .... . 2.6827 mills per kWh TARIFF ENERGY CHARGE FUELADJMT. TOTAL ENERGY CHARGE R.S Residential 4.873 ¢I kWh 0.26827 ¢ I kWh 5.14 127 ¢ I kWh R.S E Employee 4.142 ¢/...

AI summary The document outlines the Fuel Clause Adjustment for Louisville Gas and Electric Company, effective October 2, 2006. It specifies a fuel adjustment rate of 2.6827 mills per kWh. The text provides a detailed tariff table listing various customer classes—including Residential, Small General Service, Medium General Service, Large General Service, Industrial Power, and Public Services—detailing their respective energy charges, fuel adjustments, and total energy charges.

Louisville Gas and Electric Company
Louisville Gas and Electric Company First Revision of Original Sheet No. 70.1 P.S.C. of Ky. Electric No. 6

AI summary The document fragment identifies the Louisville Gas and Electric Company as the subject of a regulatory filing. It specifies that the proceeding concerns the First Revision of Original Sheet No. 70.1 P.S.C. of Ky. Electric No. 6, which pertains to the company's electric service rates and tariffs.

Subtract:
Subtract: - (d) inter-system sales including economy energy and other energy sold on an economic dispatch basis - (e) total system losses - Pursuant to the Public Service Commission's Order in Case No. 2004-00466 dated May 24, 2005, the Fu...

AI summary The document outlines specific deductions to be made from a calculation, including inter-system sales of economy energy and total system losses. It also references a Public Service Commission Order (Case No. 2004-00466) establishing the effective date for the Fuel Adjustment Clause as July 2005. The document serves as a formal update to a previous sheet, with an effective date of June 30, 2005.

APPLICABILITY
APPLICABILITY This adjustment is applicable to and is a part of the Utility's South Carolina retail electric rate schedules. The Public Service Commission has determined that the costs of fuel in an amount to the nearest one-thousandth of...

AI summary The text defines the methodology for calculating the fuel cost per kilowatt-hour (F) to be included in the Utility's South Carolina retail electric rate schedules. It establishes a formula accounting for total projected system fuel costs (E), including fuel consumed in own plants, purchased power (unit, limited term, and economy), and intersystem sales, divided by projected system kilowatt-hour sales (S). The calculation also incorporates a cumulative difference (G) between fuel revenues and expenses. The current fuel cost is set at 2.500 cents per kilowatt-hour.

MINUS
MINUS (D) The cost of fossil fuel and applicable S02 emission allowances recovered through Intersystem sales including the fuel costs and applicable S02 emission allowances related to economy energy sales and other energy sold on an econom...

AI summary The text defines the components of the 'MINUS' calculation for the Energy Cost Recovery Rider (Rider ECR) for Southwestern Electric Power Company. It specifies that the calculation accounts for the cost of fossil fuels and S02 emission allowances recovered through intersystem sales, specifically excluding non-billing transactions like diversity energy and storage payback. It also establishes variables for projected system kilowatt-hour sales and jurisdictional fuel revenue differences, while noting that S.C. Code Ann. Sec. 58-27-865 governs the calculation.

ENERGY COST RATE FORMULA
ENERGY COST RATE FORMULA ECR ENERGYCOSTRATE ECR = \frac{TUA + (PEC \ JAF)}{PES} \ LCF + (M \ LCF) WHERE, TUA = \sum_{j=1}^{12} ((EC_j \ JAF) - (RR_j - PTU_j)) \ \left(1 + CCR \ \frac{21 - j}{12}\right) Where, E0 = ENERGY COST FOR MONTH) OF...

AI summary The document defines the mathematical formula for the Energy Cost Recovery Rider (ECR) for the Southwestern Electric Power Company. It details the components of the ECR calculation, including the Total Unit Average (TUA), Projected Energy Costs (PEC), and Junior Adjustment Factors (JAF), as well as the historical energy cost components (Fe, Pe, MST, and DHMV). The formula is intended to determine the rider rate based on fuel costs and system costs for all electric classes of service.

ATTACHMENT A (continued)
ATTACHMENT A (continued) If DHMV SAVINGfi.i > DHLC ACCUMULATED DEFERRED FUELj AND lf0.5 • DHMV SAVINGfi.i S UNAMORTIZED LITIGATION COS1j THEN DHMV;· = DHLC ACCUMULATED DEFERRED FUELj + 0.5• (DHMV SAVINGfi.i- DHLC ACCUMULATED DEFERRED FUEL)...

AI summary The document provides specific mathematical formulas and logic for calculating the Distribution Heat and Maintenance Value (DHMV) for the Southwestern Electric Power Company. It details the conditions under which DHMV is calculated based on savings, accumulated deferred fuel, and unamortized litigation costs. It also defines the DHMV Benchmark based on the total mmBTU delivered by the Dolet Hills Lignite Company during the Historical Energy Cost Period.

Treatment of Affiliated Sales Margins
Treatment of Affiliated Sales Margins Margins allocated to SWEPCO's Arkansas retail jurisdiction resulting from energy sales transactions with affiliated electric operating companies will be reflected in the calculation of the Energy Cost...

AI summary The document specifies that margins from energy and capacity sales transactions with affiliated electric operating companies in SWEPCO's Arkansas retail jurisdiction must be included in the Energy Cost Recovery Rider (ECR) calculations. It outlines a two-step methodology for deriving the jurisdictional allocation factor: first, adjusting meter kWh to generation kWh using energy loss factors, and second, calculating the Arkansas-specific share based on the proportion of total generation kWh across all jurisdictions.

FUEL ADJUSTMENT RIDER- LOUISIANA
FUEL ADJUSTMENT RIDER- LOUISIANA All kilowatt-hours sold will be adjusted to reflect the current cost offuel. For electric service billed under applicable rate schedules for which there is no metering, the monthly usage shall be estimated...

AI summary The document outlines the methodology for calculating the Fuel Adjustment Factor (F AF) for electric service in Louisiana. It specifies that all kilowatt-hours sold will be adjusted based on current fuel costs. For unmetered services, the Company will estimate monthly usage to apply the factor. The calculation formula incorporates variables such as the Fuel cost per kilowatt-hour (F), Junior Adjustment Factor (JAF), Implicit Price Deflator (I), Load Factor (LF), S02 emission allowances (S), Annual Load Factor (ALF), Maintenance and System Taxes (M), and other specific cost components.

Definitions
Definitions F = Fuel Cost: Fuel costs incurred by the Company for the second preceding month for retail jurisdictional sales. The cost of fossil fuel shall include only those items includible in FERC Account 151 , less excludable costs def...

AI summary This document provides technical definitions for various components used to calculate fuel costs and service riders within the Louisiana Service Territory. It defines 'Fuel Cost' (F) based on FERC accounts, including costs for consumed fuel, purchased energy, and revenues from sales. It also establishes formulas for the Jurisdictional Allocation Factor (JAF), Loss Factor (LF), Average Loss Factor (ALF), Interest (I), and a specific Surcharge formula used to account for variances in fuel recovery.

FIXED FUEL FACTOR
FIXED FUEL FACTOR Electric service billed under applicable rate tariffs shall be subject to this Fixed Fuel Factor in accordance with the Substantive Rules of the Public Utility Commission of Texas Section 25.237. T I T The Fixed Fuel Fact...

AI summary The document outlines the application of a 'Fixed Fuel Factor' to electric service billed under applicable rate tariffs. It specifies that this factor is governed by the Substantive Rules of the Public Utility Commission of Texas Section 25.237. The factor is calculated by multiplying the factor by the kilowatt-hour (kWh) sales read, estimated, or determined during a billing month under a specific metering voltage provision.

The Fixed Fuel Factors are:
The Fixed Fuel Factors are: Service Voltage February- July Aug January Transmission- 138 kV $.034499 $.023743 Transmission- 69 kV $.034835 $.023975 Primary Substation \ $.035007 $.024093 Primary $.035308 $.024300 Secondary $.036301 $.02498...

AI summary The document provides a table of Fixed Fuel Factors for various service voltages in Nova Scotia. It specifies the fuel cost per kilowatt-hour for Transmission (138 kV and 69 kV), Primary Substation, Primary, and Secondary services, categorized by two seasonal periods: February-July and August-January.

Southwestern PUBLIC SERVICE Company
Southwestern PUBLIC SERVICE Company COMMISSION SCHEDULE SHEET RATE SCHEDULE NUMBER PUCT 11/-69 FUELCOSTRECOVERYFACTOR TARIFF NUMBER 7100.20 CANCELLIN 7100.19 Page 1 of2

AI summary The provided text is a header and table excerpt from a regulatory proceeding involving the Southwestern Public Service Company. It identifies the relevant commission (PUCT), specific schedule numbers (11/-69), and a rate schedule number (7100.20) associated with the 'FUELCOSTRECOVERYFACTOR'. It also notes the cancellation of tariff number 7100.19. The document serves as a structural reference for fuel cost recovery components within the utility's tariff structure.

SECONDARY DISTRIBUTION FUEL COST RECOVERY FACTOR:
SECONDARY DISTRIBUTION FUEL COST RECOVERY FACTOR: The Secondary Distribution fuel cost recovery factor to be billed is 2.2887¢ per kilowatt hour and shall apply when service is metered at less than approximately 12 kV.

AI summary The text specifies the Secondary Distribution fuel cost recovery factor, which is set at 2.2887¢ per kilowatt hour. This rate is applicable for electrical services metered at voltages below approximately 12 kV.

PRIMARY DISTRIBUTION FUEL COST RECOVERY FACTOR:
PRIMARY DISTRIBUTION FUEL COST RECOVERY FACTOR: The Primary Distribution fuel cost recovery factor to be billed is 2.2574¢ per kilowatt hour and shall apply when service is metered at greater than or equal to approximately 12 kV and less t...

AI summary The document specifies the Primary Distribution fuel cost recovery factor, establishing a rate of 2.2574¢ per kilowatt hour. This factor is applicable to electricity services metered at voltages ranging from approximately 12 kV to less than 69 kV.

SUB-TRANSMISSION FUEL COST RECOVERY FACTOR:
SUB-TRANSMISSION FUEL COST RECOVERY FACTOR: The Sub-transmission fuel cost recovery factor to be billed is 2.1608¢ per kilowatt hour and shall apply when service is metered at approximately 69 kV and less than approximately 115 kV or loss...

AI summary The document specifies the Sub-transmission fuel cost recovery factor to be billed at a rate of 2.1608¢ per kilowatt hour. This rate is applicable to services metered at approximately 69 kV and less than approximately 115 kV, as well as instances where loss compensated meters are utilized to include losses to the sub-transmission system.

PURCHASED POWER COST RECOVERY FACTOR (PCRF)
PURCHASED POWER COST RECOVERY FACTOR (PCRF) A PCRF will be added to the energy charges for each rate schedule on a per kWh basis. The factor will be determined as follows: PCRFcloss = [(P x AF)- CAc,,..J!ESc,,.. Where: - P = Estimated purc...

AI summary The document outlines the methodology for calculating the Purchased Power Cost Recovery Factor (PCRF), a new component to be added to energy charges on a per-kWh basis. The PCRF is designed to recover estimated purchased power costs (excluding fuel) that exceed the amounts recovered in base rates. The calculation incorporates a demand allocation factor (AF) based on the most recent cost-of-service study, an estimated annual kWh sales figure (ES), and a correction amount (CA) to account for variances between actual allocated costs and revenues from the preceding twelve months.

The following are the allocation factors to be used in the calculation of the PCRF:
The following are the allocation factors to be used in the calculation of the PCRF: Rate Class Demand Allocation Factor (AF) Residential Lighting 0.130000 Residential All Electric 0.013154 Residential Space Heating 0.004100 Residential Wat...

AI summary The document specifies the demand allocation factors (AF) used to calculate the Purchased Power Cost Recovery Factor (PCRF). It provides a detailed breakdown of factors for various rate classes, including residential lighting, space heating, heat pumps, irrigation, and various industrial and public authority categories, as well as specific distribution and transmission classes.

N-40RIRs Attachment SEB-NSPI - 2a, pt. 1 (Large File - 22 MB) 95 passages
MONTHLY RATE (TRANSMISSION)
MONTHLY RATE (TRANSMISSION) Base Charge: $2,000 per customer; plus Capacity Charge: $10.00 per kW for all kW of billing capacity; plus Energy Charge: 0.8595¢ per kWh for all kWh.

AI summary The document outlines the specific monthly transmission rate structure. The rate is composed of three components: a base charge of $2,000 per customer, a capacity charge of $10.00 per kW for all billing capacity, and an energy charge of 0.8595¢ per kWh for all energy consumed.

Preamble
The capacity for billing purposes shall be the maximum integrated fifteen (15) minute capacity during each billing period of approximately thirty (30) days, measured in kilowatts by an appropriate capacity meter; provided, however, that su...

AI summary The text defines the methodology for determining 'capacity' for billing purposes. It specifies that capacity is based on the maximum integrated fifteen-minute capacity during a thirty-day billing period, measured in kilowatts. It also establishes a floor for this measurement, stipulating that the capacity cannot be less than 90% of the measured maximum requirements from the previous eleven months, 90% of the contracted capacity, or 3,000 kW, whichever is greatest.

ADJUSTMENT FOR TRANSFORMATION FACILITIES
ADJUSTMENT FOR TRANSFORMATION FACILITIES Monthly charges shall be increased by seventy-six cents (76¢) per kW of billing capacity whenever the Company supplies transformation facilities from its transmission lines. The monthly charges shal...

AI summary The document specifies a monthly charge adjustment for transformation facilities based on the source of the supply. The charges are increased by $0.76 per kW of billing capacity when supplied from transmission lines, and by $1.30 per kW of billing capacity when supplied from distribution lines.

ADJUSTMENT FOR LOW POWER FACTOR
ADJUSTMENT FOR LOW POWER FACTOR The bill calculated at the above rates shall be increased in the amount of thirty cents (30¢) per month per kVa of capacity requirements in excess of the kVa of capacity corresponding to a power factor of ni...

AI summary The text outlines a specific tariff adjustment for customers with a low power factor. It stipulates a monthly charge of 30 cents per kVa for capacity requirements exceeding the equivalent of a 90% power factor. The calculation method involves dividing the maximum kW capacity recorded in a billing month by 0.90 and subtracting that result from the kVa capacity requirements recorded at the time of that maximum kW capacity.

MINIMUM BILL
MINIMUM BILL No monthly bill will be rendered for less than the Base Charge, plus the capacity charge, plus applicable adjustments for transformation, plus applicable provisions of Rate ECR (Energy Cost Recovery) and Rate T (Tax Adjustment...

AI summary The document specifies the rules for determining the minimum monthly bill for customers. It establishes that no monthly bill will be rendered for an amount lower than the combined sum of the Base Charge, the capacity charge, transformation adjustments, and the applicable provisions of Rate ECR (Energy Cost Recovery) and Rate T (Tax Adjustment).

RATE STABILIZATION AND EQUALIZATION
RATE STABILIZATION AND EQUALIZATION Rate RSE (Rate Stabilization and Equalization Factor) is incorporated in this rate and will be applied to adjust (increase or decrease) kWh charges calculated hereunder.

AI summary The document introduces the Rate Stabilization and Equalization Factor (Rate RSE), which is incorporated into the current rate structure. This factor is designed to adjust the kilowatt-hour (kWh) charges, allowing for either an increase or a decrease based on the stabilization and equalization requirements of the rate.

ADJUSTMENT FOR COMMERCIAL OPERATION OF CERTIFICATED NEW PLANT
ADJUSTMENT FOR COMMERCIAL OPERATION OF CERTIFICATED NEW PLANT Rate CNP (Adjustment for Commercial Operation of Certificated New Plant) is incorporated in this rate and will be applied to increase kWh charges calculated hereunder.

AI summary The document addresses the inclusion of Rate CNP (Adjustment for Commercial Operation of Certificated New Plant) within the current rate structure. This specific rate adjustment is intended to increase the kilowatt-hour (kWh) charges calculated in the proceeding to account for the commercial operation of a newly certificated plant.

GENERAL
GENERAL The amount calculated at the above rate is subject to possible tax adjustments as set forth in Rate T (Tax Adjustment) and to rules and regulations approved or prescribed by the Alabama Public Service Commission, including any Spec...

AI summary The text specifies that the calculated rate is subject to potential tax adjustments as defined in Rate T (Tax Adjustment). It further notes that the application of these rates is governed by the rules and regulations approved or prescribed by the Alabama Public Service Commission, including any applicable Special Rules and Regulations.

ELECTRIC SERVICE
ELECTRIC SERVICE UNION ELECTRIC COMPANY ELECTRIC SERVICE P. S. C. MO., ILL. C. C., IA. ST. C. C. SCHEDULE N NO5 9th Revised SHEET NO67.1 CANCELLING SCHEDULE N NO5 8th Revised SHEET NO. 67.1 APPLYING TO MISSOURI SERVICE ARE A CE CLASSIFICAT...

AI summary The document outlines the electric service rates and terms for Union Electric Company, specifically for Missouri Service Area A. It details a multi-component rate structure including monthly customer charges, energy charges per kilowatt-hour (kWh), demand charges per kilowatt (kW), and reactive charges per kVar. The schedule includes specific provisions for optional time-of-day adjustments, billing periods, and a one-year term of use. These rates were issued pursuant to a Missouri Public Service Commission order.

NAME OF OFFICER TITLE ADDRESS
NAME OF OFFICER TITLE ADDRESS i MOIN FLECTRIC COMPANY , - CATION NO. 11 1. Rate Application. request, to all se customer agrees t kilowatts. rvice at a primary volta ige or higher , provided \ 2. Character of Service standard three-phase W...

AI summary The document snippet appears to be a portion of a rate application or service standard description. It outlines the requirements for three-phase service at a primary voltage of 34.5 kV or higher, noting that the Company provides these services subject to specific adjustments under R.1. It also indicates that the Company may specify and require primary service at a higher voltage depending on the specific customer agreement.

Rider B DISCOUNTS APPLICABLE FOR SERVICE TO SUBSTATIONS OWNED BY CUSTOMER IN LIEU OF COMPANY OWNERSHIP
Rider B DISCOUNTS APPLICABLE FOR SERVICE TO SUBSTATIONS OWNED BY CUSTOMER IN LIEU OF COMPANY OWNERSHIP \ A. Where a substation provided or leased by Customer transforms all or a part of the service from a delivery voltage of 34,500 volts o...

AI summary The text introduces Rider B, which outlines specific discounts applicable for service to substations owned by customers rather than the Company. It specifies that when a customer-provided or leased substation transforms service from 34,500 volts or higher to a lower voltage, the Company will adjust meter readings and apply discounts from its applicable rate schedule.

Delivery Voltage Metering Level Meter Adjustment Billing KW Discount (1)
Delivery Voltage Metering Level Meter Adjustment Billing KW Discount (1) 138,000 Volts or Higher 138,000 Volts or Higher See Rider C $0.95/kW 138,000 Volts or Higher Primary Voltage None $0.95/kW 34,500 or 69,000 Volts 34,500 Volts or High...

AI summary The document provides a table detailing billing kilowatt (kW) discounts based on delivery voltage and metering levels. It specifies discount rates of $0.95/kW for systems at 138,000 Volts or higher and $0.81/kW for systems at 34,500 or 69,000 Volts. It also notes that meter adjustments for higher voltage levels are subject to Rider C, while primary voltage levels have no meter adjustment.

AVAILABILITY OF SERVICE
AVAILABILITY OF SERVICE Available for electric service to general service customers with normal maximum electrical capacity requirements greater than 1,000 KW who take Standard Service from the Company. Each customer shall contract for a d...

AI summary The text outlines the requirements for 'Availability of Service' for general service customers with electrical capacity requirements exceeding 1,000 KW. Customers must contract for specific on-peak and off-peak capacities that meet their normal maximum requirements, with a minimum contract of 1,000 KW in multiples of 100 KW. The Company is not obligated to supply capacity beyond these contracted amounts. Customers whose metered demands fall below 1,000 KW for at least 10 months in a 12-month period will be moved to a standard general service schedule.

MONTHLY RATE
MONTHLY RATE Schedule Code Generation OAIT Transmission Retail Transmission Distribution Total 302 Secondary Voltage: Customer Charge ($) - 320.00 320.00 Demand Charge ($/KW) 8.74 1.66 0.04 3.98 14.42 Off-Peak Excess Demand Charge ($/KW) 1...

AI summary The document provides a detailed breakdown of the monthly rates for various voltage categories (Secondary, Primary, and Subtransmission). It specifies the components of these rates, including fixed customer charges, demand charges, off-peak excess demand charges, and energy charges. The rates are categorized by Generation, OAIT Transmission, Retail Transmission, and Distribution components. These rates were issued on October 2, 2006, following an Interim Order dated May 30, 2006.

MONTHLY RATE (Cont'd)
MONTHLY RATE (Cont'd) Schedule Code Generation OATT Transmission Retail Transmission Distribution Total 310 Transmission Voltage: Customer Charge ($) 575.00 575.00 Demand Charge ($/KW) 7.07 1.55 0.04 0.00 8.66 Off-Peak Excess Demand Charge...

AI summary The document provides a detailed breakdown of the monthly rate components for various utility services, including generation, transmission, and distribution. It specifies customer charges, demand charges (including off-peak excess demand), and energy charges per kilowatt-hour. Additionally, it defines specific charges for distribution reactive demand exceeding 50% of metered demand and establishes the Generation Levelized Fuel Factor at 1.785¢ per KWH.

MINIMUM CHARGE
MINIMUM CHARGE This Schedule is subject to a minimum monthly charge equal to the sum of the Customer Charge, the product of the Demand Charge and the monthly billing demand, and all applicable adjustments.

AI summary The document defines the minimum monthly charge for customers, specifying that it is calculated as the sum of the Customer Charge, the product of the Demand Charge and the monthly billing demand, plus any applicable adjustments.

The customer will receive a credit for each entire billing month in which the customer-owned meter is installed and functioning at the customer's service location. The credit shall be the following:
The customer will receive a credit for each entire billing month in which the customer-owned meter is installed and functioning at the customer's service location. The credit shall be the following: Delivery Voltage Secondary Primary Subtr...

AI summary The text outlines the terms for a monthly metering credit provided to customers who own and maintain their own electric service meters. Credits are assigned based on the delivery voltage level, ranging from $0.98 for secondary, primary, and subtransmission systems to $4.09 for transmission systems. Customers have the right to request the Company to replace a customer-owned meter with a Company-owned meter, which will result in the customer being charged for the replacement cost and the cessation of the monthly credit.

MEASUREMENT AND DETERMINATION OF BILLING DEMAND
MEASUREMENT AND DETERMINATION OF BILLING DEMAND The billing demand in KW shall be taken each month as the single highest 30-minute peak in KW as registered during the month in the on-peak period by a demand meter or indicator. The monthly...

AI summary The text outlines the methodology for measuring and determining monthly billing demand for customers. It specifies that billing demand is based on the single highest 30-minute peak in kilowatts (KW) during on-peak and off-peak periods. It establishes a floor of 60% of either the contract capacity or the highest demand from the previous 11 months. Additionally, it defines the specific timeframes for on-peak and off-peak periods, including weekend and holiday designations.

MEASUREMENT AND DETERMINATION OF BILLING DEMAND
MEASUREMENT AND DETERMINATION OF BILLING DEMAND The billing demand in KW shall be taken each month as the single highest 30-minute peak in KW as registered during the month in the on-peak period by a demand meter or indicator. The monthly...

AI summary This section outlines the methodology for measuring and determining monthly billing demand for customers. It specifies that on-peak and off-peak billing demands are based on the single highest 30-minute peak recorded during their respective periods. A floor of 60% is established for these demands based on either contract capacity or the highest demand from the previous 11 months. It also defines reactive demand, rounding rules, and the specific time windows for on-peak and off-peak periods, including holiday designations.

METERED VOLTAGE ADJUSTMENT
METERED VOLTAGE ADJUSTMENT The rates set forth in this Schedule are based upon the delivery and measurement of energy at the same voltage. When the measurement of energy occurs at a voltage different than the delivery voltage, the measurem...

AI summary This text outlines the procedures for metered voltage adjustments when energy is measured at a different voltage than the delivery voltage. The Company reserves the right to compensate for these differences using loss compensating equipment, formulas, or specific multipliers. Specifically, measurements at the low-side of customer-owned transformers are multiplied by 1.01, while measurements at the high-side of Company-owned transformers are multiplied by 0.98 to ensure accurate billing of KWH, KW, and KVAR.

EQUIPMENT SUPPLIED BY CUSTOMER
EQUIPMENT SUPPLIED BY CUSTOMER Customers who as of October 7, 1983, owned, operated and maintained all equipment and apparatus beyond the delivery point of service, were receiving equipment credit for such ownership, and whose service was...

AI summary The document specifies a retail transmission credit for customers who owned and maintained all equipment beyond the delivery point of service as of October 7, 1983. This credit applies to customers served at a primary delivery voltage of 34,500 volts. The credit amount is set at $0.54 per KW for the combined sum of on-peak and off-peak excess monthly billing demands, specifically for those billed under the primary delivery voltage rates of the schedule.

TERM
TERM Contracts will be required for an initial period of not less than two (2) years and shall remain in effect thereafter until either party shall give the other at least twelve (12) months' written notice of the intention to discontinue...

AI summary The text outlines the contractual requirements for customers seeking service, specifying a minimum initial contract period of two years with a twelve-month notice period for termination. It clarifies that existing customers changing requirements do not need new initial contracts unless additional facilities are involved. Additionally, it describes the options for customers to transition between Standard Schedule L.P.S. and Open Access Distribution Schedule O.A.D.-L.P.S., and the conditions under which qualifying customers may elect to use a qualified Energy Service Provider.

SPECIAL TERMS AND CONDITIONS
SPECIAL TERMS AND CONDITIONS This Schedule is subject to the Company's Terms and Conditions of Standard Service. Customers with cogeneration and/or small power production facilities shall take service under Schedule COGEN/SPP or by special...

AI summary This document outlines the special terms and conditions for electricity service, specifying that these terms are subject to the Company's Terms and Conditions of Standard Service. It defines specific service schedules for customers with cogeneration or small power production facilities (Schedule COGEN/SPP), those with external energy sources (Schedule S.B.S.), and stipulates that all other customers fall under the standard terms. The schedule was issued in 2003 and became effective on January 1, 2004.

MONTHLY RATE
MONTHLY RATE Schedule Codes Service Voltage Demand Charge ($/KW) Off-Peak Excess Demand Charge ($/KW) Energy Charge (¢/KWH) Customer Charge ($/Month) 327 Secondary (D) 12.33 (I) 6.05 (I) 1.813 (I) 85.00 322 Primary (D) 11.06 (I) 3.95 (I) 1...

AI summary The document provides a table of monthly rates for various service voltages, including Secondary, Primary, Subtransmission, and Transmission. It details specific Demand Charges (per KW), Off-Peak Excess Demand Charges (per KW), Energy Charges (per KWH), and monthly Customer Charges for each schedule code. Additionally, it specifies a Reactive Demand Charge for leading or lagging reactive demand exceeding 50% of the metered KW demand.

LOCAL TAX ADJUSTMENT
LOCAL TAX ADJUSTMENT (C) To bills for electric service supplied within specified municipalities or political subdivisions which impose taxes based upon the amount of electric service sold or revenues received by the Company, as specified o...

AI summary The document describes the methodology for applying a local tax adjustment to electric service bills. It specifies that a surcharge will be added to bills for service supplied within certain municipalities or political subdivisions. This surcharge is calculated based on percentages provided on specific sheets (4-2, 4-3, and 4-4) to ensure the Company can recover taxes imposed on the amount of electric service sold or revenues received.

MEASUREMENT AND DETERMINATION OF DEMAND AND ENERGY
MEASUREMENT AND DETERMINATION OF DEMAND AND ENERGY The billing demand in KW shall be taken each month as the single highest 30-minute peak in KW as registered during the month in the on-peak period by a demand meter or indicator. The month...

AI summary The document specifies the methodology for measuring and determining monthly billing demand in kilowatts (KW). Billing demand is defined as the single highest 30-minute peak recorded during the on-peak period. Additionally, it establishes a floor for monthly billing demand, stating it cannot be less than 60% of the greater value between the customer's contract capacity or their highest previously established monthly billing demand from the preceding 11 months.

MEASUREMENT AND DETERMINATION OF DEMAND AND ENERGY (Cont'd)
MEASUREMENT AND DETERMINATION OF DEMAND AND ENERGY (Cont'd) The off-peak excess demand shall be the amount by which the demand created during the off-peak period exceeds the monthly billing demand. The reactive demand in KV AR shall be tak...

AI summary The text defines the technical methodologies for measuring and determining electricity demand and energy for billing purposes. It specifies how to calculate off-peak excess demand, establishes that reactive demand is based on the highest 30-minute peak in KV AR per month, and mandates rounding billing demands to the nearest whole KW and KV AR. Additionally, it defines the specific hours and days constituting on-peak and off-peak billing periods, including designated holidays.

METERED VOLTAGE ADJUSTMENT
METERED VOLTAGE ADJUSTMENT The rates set forth in this Schedule are based upon delivery and measurement of energy at the same voltage. When the measurement of energy occurs at a voltage different than the delivery voltage, the measurement...

AI summary The document outlines the procedure for handling energy measurements taken at voltages different from the delivery voltage. It specifies that the Company will compensate for these differences to the delivery voltage using either Joss compensating equipment or specific multipliers. For instances where multipliers are applied, the text defines the exact factors: a 1.01 multiplier for measurements taken at the low-side of a customer-owned transformer and a 0.98 multiplier for measurements taken at the high-side of a Company-owned transformer.

APPALACHIAN POWER COMPANY WHEELING POWER COMPANY (See Sheet Nos. 2-1 through 2-7 for Applicability)
APPALACHIAN POWER COMPANY WHEELING POWER COMPANY (See Sheet Nos. 2-1 through 2-7 for Applicability) Original Sheet No. 15-3 P.S.C. W.VA. TARIFF N0.12 (APPALACHIAN POWER COMPANY) P.S.C. W.VA. TARIFF NO. 17 (WHEELING POWER COMPANY)

AI summary The document identifies the specific tariffs applicable to Appalachian Power Company and Wheeling Power Company. It references P.S.C. W.VA. Tariff No. 12 for Appalachian Power Company and P.S.C. W.VA. Tariff No. 17 for Wheeling Power Company, noting that applicability details can be found in Sheets 2-1 through 2-7.

Customers with cogeneration and!or small power production facilities shall take service under Schedule COGEN/SPP or by special agreement with the Company.
Customers with cogeneration and!or small power production facilities shall take service under Schedule COGEN/SPP or by special agreement with the Company. STATE OF MISSOURI, PUBLIC SERVICE COMMISSION P.S.C. MO. No. 1 Revised Sheet No'3:::1...

AI summary The text specifies the service requirements for customers possessing cogeneration and/or small power production facilities, noting they must utilize Schedule COGEN/SPP or enter into a special agreement with the Company. It also includes a regulatory filing header for the State of Missouri Public Service Commission regarding Aquila Networks (dba Aquila, Inc.) for Large Power Service in the Kansas City area.

Section 76
Available for combined lighting and power seNice to any customer who shall contract for a minimum capacity of five hundred (500) kilowatts (kW} for a period of twelve (12} consecutive months.

AI summary The text describes a service offering for combined lighting and power available to customers who enter into a contract for a minimum capacity of 500 kilowatts (kW) for a minimum duration of twelve consecutive months.

BASE RATE, M0944
BASE RATE, M0944 Facilities kW Charge For the first five hundred (500} Facilities kW, per bill $678.40 For all over five hundred (500) Facilities kW, per each Facilities kW $1 .06 Billed Demand Charge Billing cycles June through September...

AI summary The document presents a detailed breakdown of the base rate structure for commercial and industrial power services. It specifies various charges including a fixed fee for the first 500 kW of facilities, a per-kW charge for capacity exceeding that amount, and a tiered demand charge system that varies by billing cycle and previous summer peak usage. Additionally, it outlines differentiated energy charges for 'on-peak' and 'off-peak' consumption across two distinct seasonal billing periods.

Facilities kW
Facilities kW The Facilities kW shall be determined by a comparison of the Actual kW in the current billing period and the Actual kW as recorded in each of the previous eleven (11) billing periods. If there are less than eleven (11) previo...

AI summary The document defines the methodology for determining 'Facilities kW' for billing purposes. The Facilities kW is calculated by comparing the Actual kW of the current billing period against the highest Actual kW recorded in the preceding eleven billing periods. The value is capped at a minimum of 500 kW. It also provides a calculation example showing how the Facilities kW Charge is derived based on the resulting kW value.

Issued: February 24, 2006 Effective: March 1, 2006
Issued: February 24, 2006 Effective: March 1, 2006 P.S.C. MO. No. 1 Original Sheet No. 32 Canceling P.S.C. MO. No. Sheet No. Aquila, Inc., dba For Tomiton, Consed by Aprillo Natural 190 AQUILA NETWORKS KANSAS CITY, MO 64138 For Territory S...

AI summary This document fragment is an excerpt from a regulatory filing issued by the Public Service Commission of Missouri (P.S.C. MO.) on February 24, 2006. It pertains to Aquila, Inc. (doing business as Aquila Networks) and specifies tariff details for the L&P territory. The text identifies a specific rate category for Large Power Service (LPS) and begins to list 'Billed Demand' components, specifically mentioning 'ICE' (likely Industrial Customer Electricity or similar) and 'C' (Commercial) classifications.

Previous Summer Peak kW
Previous Summer Peak kW The Previous Summer Peak kW shall be the greater of: the maximum fifteen (15) minute "on-peak" demand measured during the most recent billing months of July, August, and September or 2) fifty percent (50%) of the ma...

AI summary The text defines the methodology for determining the 'Previous Summer Peak kW' value, which is used to establish billing parameters for the period from October through May. The value is calculated as the greater of the maximum 15-minute 'on-peak' demand during July, August, and September, or 50% of the maximum 15-minute 'off-peak' demand during those same months. A minimum floor of 500 kW is established for this metric.

BILLING PERIODS
BILLING PERIODS Summer Winter Weekdays (except holidays) (1) On-peak 10 a.m 10 p.m. 15 his hoox 5 Off-peak 10 p.m 10 a.m. = 60 km, 10 p.m 7 a.m. = 75 ms/week Weekends, holidays per week $ (00.00) (2000) Off-peak all hours = 36% all hours =...

AI summary The document outlines the specific billing periods and time-of-day (TOD) structures for electricity rates, categorized into Summer and Winter periods. It defines 'On-peak' and 'Off-peak' hours for weekdays, weekends, and holidays, noting that times are based on Central Standard Time or Central Daylight Savings Time. The schedule specifies various time windows, such as 10 a.m. to 10 p.m. for certain summer periods and specific hourly allocations for winter weekday and weekend usage.

SPECIAL RULES
SPECIAL RULES The voltage, frequency, and phase of all service under this schedule shall be only as specified by the Company. Service will be furnished under, and this schedule shall be subject to Company Rules and Regulations Service is f...

AI summary This section outlines the special rules governing the delivery of electrical service under a specific schedule. It establishes that the Company maintains sole authority over voltage, frequency, and phase specifications. It mandates that service must comply with Company Rules and Regulations, is intended for the sole use of the customer at the specified premises, and strictly prohibits the resale or submetering of energy.

Issued by: Dennis Williams, Regulatory Services
Issued by: Dennis Williams, Regulatory Services STATE OF MISSOURI, PUBLIC SERVICE COMMISSION P.S.C. MO. No. 1 Revised Sheet No:3~3: Canceling P.S.C. MO. No. 1 Original Sheet No:3~3: Aquila, Inc., dba AQUILA NETWORKS For Territory Served by...

AI summary This document is a revised tariff sheet (Sheet No. 3~3) issued by the Public Service Commission of Missouri for Aquila Networks. It specifically pertains to the Large Power Service (LPS) for the Lights and Power (L&P) territory. The text serves as a formal regulatory filing to update the electric rates and service conditions for industrial power customers in the Kansas City, Missouri area.

METERING LOSS ADJUSTMENT
METERING LOSS ADJUSTMENT Where service is metered at a voltage level other than secondary, an adjustment to both the kilowatt-hour (kWh) and kilowatt (kW) readings will be made as follows: - 1. Service Metered at Primary Voltage Where serv...

AI summary The document outlines the specific rules for the Metering Loss Adjustment, which applies to customers served at secondary voltage. It specifies fixed percentage reductions for metered kilowatt-hour (kWh) and kilowatt (kW) readings based on the voltage level of the service point: 1.5% for primary voltage (12 kV circuit feeder), 2.5% for substation voltage (4 kV or 12 kV), and 3% for transmission voltage (34 kV and above). Customers must bear all costs for meter relocation to qualify for these adjustments, and the adjustment is unavailable for new installations after March 1, 2006.

APPLICABLE:
APPLICABLE: To general service supplied for all power requirements when all such service taken on the premises is supplied through one meter installation for a demand of not less than 2,500 kVA but not greater than 25,000 kV A. The average...

AI summary The text outlines the specific rate schedule and service requirements for large power service. It defines eligibility based on a customer's average demand (between 2,500 kVA and 25,000 kVA) over a twelve-month period. The monthly rate structure includes tiered energy charges based on consumption volume, a demand charge for the first 3,000 kVA with additional charges for excess, and a primary voltage discount for high-voltage service. Customers are also required to maintain their own transformers and enter into a minimum five-year contract.

SPECIAL TERMS AND CONDITIONS:
SPECIAL TERMS AND CONDITIONS: For Customers who have more than one metering point to serve contiguous facilities or properties, the coincident demand from all such meters must not exceed 25,000 kVA in order to receive service under this sc...

AI summary The text outlines special terms and conditions for customers seeking service under a specific rate schedule. Key requirements include a coincident demand limit of 25,000 kVA for contiguous facilities, a minimum kVA demand of 2,500 for customers with a power factor below 80%, and a prohibition on using resistance load banks to artificially inflate demand. It also specifies grandfathering for existing customers who installed demand-side management measures before May 1, 1992, and notes that monthly rates are subject to various adjustments including tax and energy efficiency riders.

APPLICABLE:
APPLICABLE: To Customers in the State of Idaho where the Company has electric service available. This Power Cost Adjustment shall be applicable to all retail customers for charges for electric energy sold and to the flat rate charges for C...

AI summary The text defines the scope and purpose of a Power Cost Adjustment for retail customers in the State of Idaho where the Company provides electric service. The adjustment applies to electric energy charges as well as flat rate charges for street and area lighting. Its primary function is to recover or rebate the variance between actual and allowed net power supply costs.

MONTHLY RATE:
MONTHLY RATE: The energy charges of the individual rate schedules are to be increased by the following amounts: Schedule 1 - .081¢ per kWh Schedule 11 & 12 - .095¢ per kWh Schedule 21 & 22 - .073¢ per kWh Schedule 25 - .052¢ per kWh Schedu...

AI summary The document specifies the approved increases for the monthly energy charges across various individual rate schedules. Specific per-kWh increases are provided for Schedules 1, 11, 12, 21, 22, 25, 25P, 31, and 32. Additionally, it mandates a 1.25% increase for flat rate charges associated with Company-owned or Customer-owned Street Lighting and Area Lighting Services.

Rate\
Rate\ Connection Charges per Month: Secondary Primary and Primary Direct Transmission $ 15.00 $75.00 $300.00 Maximum Load Charge (Monthly) Transmission Line Service at nominal voltage of 138,000, 230,000 or 345,000 Volts Each kW of Billing...

AI summary The document presents a schedule of connection charges and monthly service rates for various electricity transmission and distribution services. It specifies monthly connection fees for Secondary, Primary, and Primary Direct Transmission, along with Maximum Load Charges and Energy Charges based on voltage levels. Additionally, it details a KVAr Charge for monthly billed kVAr demand. The rates are part of IURC NO. 14, Second Revised Sheet No. 12.

Monthly Minimum Charge
Monthly Minimum Charge The monthly minimum charge shall be the Maximum Load Charge.

AI summary The document specifies the definition of the monthly minimum charge, stating that it shall be equivalent to the Maximum Load Charge.

Metering Adjustments
Metering Adjustments At the option of the Company, service hereunder may be metered at voltage levels different from delivered voltages. In the event metered voltages exceed delivered voltages, before computing the charges, the actual meas...

AI summary The document outlines the procedure for metering adjustments when the voltage level used for metering differs from the actual delivered voltage. It specifies that if the metered voltage exceeds the delivered voltage, the measurements for energy, kVAr, and Billing Maximum Load must be decreased by 1% before calculating charges. Conversely, if the delivered voltage exceeds the metered voltage, these measurements must be increased by 1% before charges are computed.

Billing Maximum Load
Billing Maximum Load The Billing Maximum Load will equal the Metered Maximum Load in kW adjusted for metering adjustments, if applicable. In no event shall the Billing Maximum Load be less than 25 kW. Billing of kVAr For Customers who have...

AI summary The text defines the methodology for determining the Billing Maximum Load, which is based on the Metered Maximum Load in kW, subject to metering adjustments, with a minimum floor of 25 kW. It also specifies the calculation methods for billed kVAr demand based on whether a customer has pulse metering. For pulse metering customers, calculations use peak 30-minute kW demand and coincident power factor; for others, average monthly power factor is used.

Special Terms and Conditions (Contd.)
Special Terms and Conditions (Contd.) - 2. All wiring, pole lines, wires, and other electrical equipment and apparatus located beyond point of connection of Customer's service lines with the lines of Company are considered the distribution...

AI summary This section outlines special terms and conditions regarding the distribution of electrical services. It clarifies that equipment beyond the point of connection is the customer's responsibility, except for certain metering equipment. It addresses the company's policy on providing transformations for primary service, noting that excess facilities charges apply for unusual requests. Additionally, it defines metering requirements for single locations and establishes a 'Maintenance Period Provision' allowing customers to receive prorated maximum load charges during scheduled maintenance, subject to a $500.00 fee.

\ Subject to:
\ Subject to: Standard Contract Rider No. 60-Fuel Cost Adjustment Standard Contract Rider No. 62—Qualified Pollution Control Property Revenue Adjustment Standard Contract Rider No. 63—SO 2 and NO x Emission Allowance Adjustment Standard Co...

AI summary The document lists several Standard Contract Riders that modify the terms of utility contracts. These riders address various cost adjustments and credits, including fuel costs, pollution control property revenue, emission allowances, merger savings, demand side management, purchased power costs for peak load, Midwest ISO management costs, summer reliability, and clean coal operating costs. These adjustments are effective as of November 1, 2006.

- (2) Effective April 2006, Will be applied to Customers Billing starting with June 2006 bills.
- (2) Effective April 2006, Will be applied to Customers Billing starting with June 2006 bills. JUL -SEPT 2006 QUARTER 3 RS cs LLF HLF TS Fuel Rider 60 $0.010520 $0.010520 $0.010520 $0.010520 $0.010520 Qualified Pollution-Rider 62 $0.00148...

AI summary The document provides a detailed schedule of various rate riders and adjustments applicable to customer billing starting in June 2006. It specifies rates for different service types, including Residential Service (RS), Commercial Service (CS), Large Load Fuel (LLF), High Load Fuel (HLF), and Transmission Service (TS). The riders include fuel costs, pollution-related charges, emission allowances, merger savings credits, demand-side management (DSM) expenses, and various reliability and operating cost adjustments.

- (2) Efffectlve First Billing Cycle of September 2006
- (2) Efffectlve First Billing Cycle of September 2006 OCT - DEC 2006 QUARTER 4 RS cs LLF HLF TS Fuel Rider 60 $0.007713 $0.007713 $0.007713 $0.007713 $0.007713 Qualified Pollution-Rider 62 $0.001480 $0.001560 $0.001516 0.652214111 $0.0011...

AI summary The document presents a table of various rate riders and their associated costs for the October - December 2006 quarter. It specifies the specific dollar amounts for components including the Fuel Rider, Qualified Pollution-Rider, Emission Allow. Rider, Merger Savings Credit, Demand-Side Management (DSM) On-Going Expenses, Midwest ISO Management Cost and Revenue Adjustment, Summer Reliability Adjustment, and Clean Coal Operating Cost across different service types (RS, CS, LLF, HLF, TS). It also notes that the Rate HLF factor is billed on non-coincident demand.

STANDARD CONTRACT RIDER NO. 62 QUALIFIED POLLUTION CONTROL PROPERTY REVENUE ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS
STANDARD CONTRACT RIDER NO. 62 QUALIFIED POLLUTION CONTROL PROPERTY REVENUE ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS The applicable charges for electric service to the Company's retail customers, to the extent so served, shall include a...

AI summary The document outlines the methodology for the Qualified Pollution Control Property Revenue Adjustment for retail electric service customers. It specifies that these charges reflect the rate base treatment for qualified pollution control property as per established regulations. The revenue adjustment is calculated by multiplying a specific adjustment factor (rounded to the nearest 0.001 mill) by the customer's monthly billed or estimated kilowatt-hours, depending on whether the service is metered or unmetered.

STANDARD CONTRACT RIDER NO. 62 QUALIFIED POLLUTION CONTROL PROPERTY REVENUE ADJUSTMENT FACTOR APPLICABLE TO RETAIL RATE GROUPS
STANDARD CONTRACT RIDER NO. 62 QUALIFIED POLLUTION CONTROL PROPERTY REVENUE ADJUSTMENT FACTOR APPLICABLE TO RETAIL RATE GROUPS Qualified Pollution Control Property Qualified Pollution Control Property Revenue Adjustment Line Revenue Adjust...

AI summary The document outlines Standard Contract Rider No. 62, which establishes the Qualified Pollution Control Property Revenue Adjustment Factor for various retail rate groups. It provides specific financial factors per kilowatt-hour (KWH) and non-coincident kilowatts (KW) for different service categories, including Residential Service (RS), Commercial Service (CS), and various industrial and transmission service rates. The rider serves to adjust revenues based on qualified pollution control property investments.

The following are the monthly merger savings credit rider rates:
The following are the monthly merger savings credit rider rates: Line No. Retail Rate Group Rate Per kWh Line No. RateRS ($0.002248) 2 Rates CS and FOC ($0.001987) 2 3 Rate LLF ($0.001664) 3 4 Rate HLF ($0.001 045) 4 5 Purdue - Supplementa...

AI summary The document provides a schedule of monthly merger savings credit rider rates across various retail rate groups. These rates are presented as negative values per kilowatt-hour (kWh), indicating a credit to the customers. The list includes specific rates for residential, commercial, and high-load fuel groups, as well as specific industrial and municipal accounts. The rates are associated with IURC NO. 14 Fourth Revised Sheet No. 66.

STANDARD CONTRACT RIDER NO. 66 DEMAND SIDE MANAGEMENT ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS
STANDARD CONTRACT RIDER NO. 66 DEMAND SIDE MANAGEMENT ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS A. The applicable charges for electric service to the Company's retail electric customers shall include a charge to recover on-going Demand S...

AI summary This document outlines Standard Contract Rider No. 66, which establishes the mechanism for recovering ongoing Demand Side Management (DSM) expenses from retail electric customers. It defines the calculation of a monthly DSM billing adjustment by multiplying a specific DSM adjustment factor by the monthly kilowatt-hour usage. Notably, the adjustment is excluded for commercial and industrial customers with an annual billed peak demand exceeding 500 kilowatts. The formula also accounts for the recovery of utility receipts taxes associated with these costs.

Duke Energy Indiana, Inc.
Duke Energy Indiana, Inc. 1 000 East Main Street Plainfield, Indiana 46168 IURCN0. 14 Fourth Revised Sheet No. 66 Cancels and Supersedes Third Revised Sheet No. 66 Page 2 of4

AI summary The provided text is a heading and a partial identification page for Duke Energy Indiana, Inc. It lists the company's address in Plainfield, Indiana, and includes a revision notice for a utility rate sheet (Fourth Revised Sheet No. 66), which cancels and supersedes the Third Revised Sheet No. 66.

STANDARD CONTRACT RIDER NO. 66 DEMAND SIDE MANAGEMENT ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS
STANDARD CONTRACT RIDER NO. 66 DEMAND SIDE MANAGEMENT ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS Line No. Demand Side Management Revenue Adjustment Retail Rate Grouo Factor Per kWh (Note) Line No. Rate RS $ 0.000618 2 Rates CS and FOC $ 0...

AI summary The document presents Standard Contract Rider No. 66, which establishes Demand Side Management (DSM) revenue adjustment factors for various retail rate groups. It specifies distinct per kWh factors for Residential Service (RS), Commercial Service (CS), Fuel Oil Customers (FOC), Large Load Fuel (LLF), and High Load Fuel (HLF). Notably, the rider excludes commercial and industrial customers with a peak demand exceeding 500 kW during the previous calendar year from these adjustments.

Duke Energy Indiana, Inc.
Duke Energy Indiana, Inc. 1000 East Main Street Plainfield, Indiana 46168 IURC No. 14 Fourth Revised Sheel No. 66 Cancels and Supersedes Third Revised Sheet No. 66 Page 4 or 4

AI summary This document fragment identifies Duke Energy Indiana, Inc. as a regulated entity. It specifies the company's address in Plainfield, Indiana, and references a specific regulatory filing (IURC No. 14 Fourth Revised Sheet No. 66) which cancels and supersedes a previous version of the rate sheet. The text serves as a formal header and administrative update for the utility's rate structure.

Standard Contract Rider No. 67 Recovery of Preapproved Purchased Power Costs to Meet Retail Customer Peak Load Requirements (Purchased Power Tracker)
Standard Contract Rider No. 67 Recovery of Preapproved Purchased Power Costs to Meet Retail Customer Peak Load Requirements (Purchased Power Tracker) On April 17, 2004, the Commission approved the recovery of certain jurisdictional purchas...

AI summary The document outlines Standard Contract Rider No. 67, which establishes a mechanism for the recovery of preapproved purchased power costs. These costs are specifically associated with meeting the peak load requirements of retail customers within the IURC jurisdiction. The rider ensures that these charges are recovered separately from the fuel adjustment charge. It specifies that retail electric service rates will be increased based on a formula involving a Purchased Power Factor to account for the estimated costs of purchased power.

Standard Contract Rider No. 67 Recovery of Preapproved Purchased Power Costs to Meet Retail Customer Peak Load Requirements (Purchased Power Tracker)
Standard Contract Rider No. 67 Recovery of Preapproved Purchased Power Costs to Meet Retail Customer Peak Load Requirements (Purchased Power Tracker) Line No. Rate Groups Purchased Power Factor Per kWh to be Applied to Customer Bills Begin...

AI summary The document outlines Standard Contract Rider No. 67, which establishes the recovery of preapproved purchased power costs required to meet retail customer peak load requirements. The provided table specifies the Purchased Power Factor per kWh to be applied to customer bills beginning with the effective date of the Order in Cause No. 42359. Currently, all listed rate groups, including residential, commercial, and industrial categories, show a factor of $0.000000.

STANDARD CONTRACT RIDER NO. 68 MIDWEST INDEPENDENT SYSTEM OPERATOR ("MIDWEST ISO") MANAGEMENT COST AND REVENUE ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS
STANDARD CONTRACT RIDER NO. 68 MIDWEST INDEPENDENT SYSTEM OPERATOR ("MIDWEST ISO") MANAGEMENT COST AND REVENUE ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS The applicable charges for electric service to the Company's retail electric custome...

AI summary This document outlines Standard Contract Rider No. 68, which establishes the mechanism for adjusting electric service charges for retail customers based on the operation and maintenance expenses of the Midwest Independent System Operator (MIDWEST ISO). The adjustment is calculated by applying a specific Management Cost and Revenue Adjustment Factor to the monthly billed or estimated kilowatt-hours consumed by customers over three consecutive billing cycles.

The Midwest ISO Management Cost and Revenue Adjustment Factor by Rate Group applicable to the October, November and December 2006 billing cycles is as follows:
The Midwest ISO Management Cost and Revenue Adjustment Factor by Rate Group applicable to the October, November and December 2006 billing cycles is as follows: Line No. Retail Rate Graue Midwest ISO Management Cost and Revenue Adjustment F...

AI summary The document provides a specific table of Midwest ISO Management Cost and Revenue Adjustment Factors applicable to various retail rate groups for the October, November, and December 2006 billing cycles. The factors are listed per kilowatt-hour (KWH) for different categories, including residential, commercial, and specific industrial rates such as LLF, HLF, and others.

STANDARD CONTRACT RIDER NO. 70 SUMMER RELIABILITY ADJUSTMENT APPLICABLE TO ALL RETAIL RATE SCHEDULES
STANDARD CONTRACT RIDER NO. 70 SUMMER RELIABILITY ADJUSTMENT APPLICABLE TO ALL RETAIL RATE SCHEDULES A. The applicable charges for electric service to the Company's retail electric customers shall be increased or decreased, to the nearest...

AI summary The document outlines Standard Contract Rider No. 70, which establishes a formula for the Summer Reliability Adjustment Factor. This adjustment is designed to recover or credit retail electric customers for the net jurisdictional costs of summer reliability purchases, PowerShare® program costs, and net profits from off-system sales. The formula incorporates variables such as purchased power capacity costs, PowerShare® bill credits, coincident system peak demand allocations, off-system sales profits, and annual kilowatt-hour sales, while allowing for adjustments for utility receipts taxes and annual reconciliations.

STANDARD CONTRACT RIDER NO. 70 SUMMER RELIABILITY ADJUSTMENT APPLICABLE TO ALL RETAIL RATE SCHEDULES
STANDARD CONTRACT RIDER NO. 70 SUMMER RELIABILITY ADJUSTMENT APPLICABLE TO ALL RETAIL RATE SCHEDULES Estimated Summer Reliability Factor Per kWh Line to be Applied to Customer Line No. Rate Groups Bills No. (A) RateRS $0.000385 2 Rates CS...

AI summary The document outlines Standard Contract Rider No. 70, which establishes a Summer Reliability Adjustment applicable to all retail rate schedules. It provides specific estimated summer reliability factors per kWh for various rate groups, including residential, commercial, and industrial customers, as well as specific industrial entities like NUCOR and Air Liquide. The adjustment became effective during the first billing cycle of November 2006.

Percent Share
Percent Share Line kW Share of Of Line No. Rate GroUQS S:tstem Peak {12 CP} S~stem Peak No. (A) (B) RateRS 1,582,005 33.713% 2 Rates CS and FOC 224,244 4.779% 2 3 Rate LLF 628,152 13.386% 3 4 Rate HLF 1,808,566 38.540% 4 5 Purdue-Supplemen...

AI summary The document provides a detailed breakdown of the company's total load, categorized by rate group, as a percentage of the system peak (Coincident Peak). It distinguishes between retail and wholesale loads, with retail representing 91.791% of the total company load. Specific rate groups such as Rate HLF, Rate RS, and Rate LLF are identified with their respective kilowatt (kW) shares, while other industrial and commercial rate groups are listed with smaller shares.

STANDARD CONTRACT RIDER NO. 71 CLEAN COAL OPERATING COST REVENUE ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS .
STANDARD CONTRACT RIDER NO. 71 CLEAN COAL OPERATING COST REVENUE ADJUSTMENT APPLICABLE TO RETAIL RATE GROUPS . Clean Coal Clean Coal Operating Cost Operating Cost Revenue Adjustment Line Revenue Adjustment Factor Per Line No. Retail Rate G...

AI summary The document outlines Standard Contract Rider No. 71, which establishes the Clean Coal Operating Cost Revenue Adjustment for various retail rate groups. It provides specific revenue adjustment factors per kilowatt-hour (KWH) and non-coincident kilowatts (KW) for different customer categories, including Residential Service (RS), Commercial Service (CS), and various industrial and transmission service rates. The rider became effective on November 1, 2006.

KW Share Percent
KW Share Percent Line of Share Of Line No. Rate Groups System Peak System Peak No. (A) (B) 1 Rate RS 1,582,005 36.727% 1 2 Rates CS and FOC 224,244 5.206% 2 3 Rate LLF 628,152 14.583% 3 4 Rate HLF 1,808,566 41.987% 4 5 Purdue-Supplemental...

AI summary The document provides a breakdown of the system peak kilowatt (KW) share for various rate groups as of November 1, 2006. It lists 17 distinct categories, including Residential Service (RS), High Load Fuel (HLF), and Commercial Service (CS), showing their respective shares of the total retail system peak. High Load Fuel represents the largest single share at 41.987%, followed by Residential Service at 36.727%.

AVAILABILITY (North Carolina Only)
AVAILABILITY (North Carolina Only) Available to the individual customer. Service under this Schedule shall be used solely by the contracting Customer in a single enterprise, located entirely on a single, contiguous premises. This Schedule...

AI summary The text outlines the availability and limitations of a specific electric service schedule, noting it is available to individual customers but restricted to a single enterprise on a single, contiguous premises. It explicitly excludes residential customers, auxiliary services, and breakdown services. Furthermore, the power provided cannot be resold, exchanged, or used in parallel with other power sources except under specific company-approved conditions. The company's obligation to supply power is contingent upon securing necessary rights-of-way and permits.

I. Basic Facilities Charge $36.07
I. Basic Facilities Charge $36.07 n. Demand Charge A. On-Peak Demand Charge For the first2000 kW of Billing Demand per month For the next 3000 kW of Billing Demand per month For all over 5000 kW of Billing Demand per month Summer Months Ju...

AI summary The document outlines the structure of the Basic Facilities Charge, specifically detailing the Demand Charge components. It provides a tiered pricing structure for on-peak demand based on billing demand levels (first 2000 kW, next 3000 kW, and over 5000 kW) for both summer and winter months. Additionally, it specifies a flat Economy Demand Charge of $1.03 per kW applicable regardless of the season.

Section 189
The Energy Charge for customers receiving service in establishments classified as "Manufacturing Industries" by the Standard Industrial Classification Manual published by the United States Government, and where more than 50% of the electri...

AI summary The text defines the classification criteria for the 'Industrial Service' rate category. Customers classified as 'Manufacturing Industries' under the Standard Industrial Classification Manual, where manufacturing processes account for more than 50% of their electric energy consumption, are assigned to the 'Industrial Service' rate. All other customers are categorized under the 'General Service' rate schedule.

General Service Industrial Service
General Service Industrial Service All Months All Months A. All On-Peak Energy per month 4.8120 cents per kWh 4.4296 cents per kWh B. All Off-Peak Energy per month 2.6766 cents per kWh 2.2942 cents per kWh Schedule OPT (NC) continued

AI summary The document presents a table of energy rates for General and Industrial Services, categorized by On-Peak and Off-Peak periods. The rates are provided in cents per kilowatt-hour (kWh) for both service types, with General Service rates being slightly higher than Industrial Service rates across both peak and off-peak periods.

DETERMINATION OF ON-PEAK AND OFF-PEAK HOURS
DETERMINATION OF ON-PEAK AND OFF-PEAK HOURS On-Peak Period Hours Summer Months June I -September 30 1:00 p.m.-9:00p.m. Monday- Friday Winter Months October I -May 3 I 6:00 a.m. - I :00 p.m. Monday- Friday Off-Peak Period Hours All other we...

AI summary The document defines the specific timeframes for On-Peak and Off-Peak electricity service periods. On-Peak hours are designated for Monday through Friday during summer months (June 1 to September 30) from 1:00 p.m. to 9:00 p.m., and during winter months (October 1 to May 31) from 6:00 a.m. to 1:00 p.m. Off-Peak hours encompass all other weekday hours, all weekend hours, and specific statutory holidays.

APPROVED FUEL CHARGE ADJUSTMENTS
APPROVED FUEL CHARGE ADJUSTMENTS The Company's approved fuel charge adjustments, if any; pursuant to North Carolina General Statute 62-133.2, will apply to all service supplied under this Schedule. The currently approved adjustments are in...

AI summary The document confirms that the Company's approved fuel charge adjustments, in accordance with North Carolina General Statute 62-133.2, are applicable to all services provided under the specified Schedule. It further notes that the currently approved adjustments are already incorporated into the Rate provided in the filing.

ADJUSTMENT FOR NET REVENUES FROM WHOLESALE SALES
ADJUSTMENT FOR NET REVENUES FROM WHOLESALE SALES The Company's Adjustment for Net Revenues from Wholesale Sales ruder will apply to service supplied to establishments classified as "Manufacturing Industries" by the Standard Industrial Clas...

AI summary The text defines the scope of the 'Adjustment for Net Revenues from Wholesale Sales' rule. This adjustment applies specifically to establishments classified as 'Manufacturing Industries' under the Standard Industrial Classification Manual, provided that more than 50% of their electric energy consumption is dedicated to manufacturing processes. The currently approved adjustment is noted as being integrated into the rate for Industrial Service.

CONTRACT DEMAND
CONTRACT DEMAND The Company will require contracts to specifY the maximum demand to be delivered to the Customer which shall be the Contract Demand. Where the Customer can restrict on-peak demand to levels considerably below that of the Co...

AI summary The text defines the requirements for 'Contract Demand' in utility service agreements. It specifies that the Company requires contracts to establish the maximum demand to be delivered to a Customer. Additionally, it notes that if a Customer can significantly restrict their on-peak demand, the Company may enter into a separate contract for a limited On-Peak Contract Demand in addition to the standard Contract Demand.

DETERMINATION OF BILLING DEMAND
DETERMINATION OF BILLING DEMAND - A. The On-Peak Billing Demand each month shall be the largest of the following: - I. The maximum integrated thirty-minute demand during the applicable summer or winter on-peak period during the month for w...

AI summary The document establishes the methodology for determining 'On-Peak Billing Demand' for customers. It specifies that the monthly billing demand is calculated as the highest value among three criteria: the maximum integrated thirty-minute demand during applicable seasonal on-peak periods, 50% of the Contract Demand (or 50% of the On-Peak Contract Demand if specified), or a fixed base of 15 kilowatts (KW).

B. Economy Demand
B. Economy Demand To determine the Economy Demand, the larger of - I. The maximum integrated thirty-minute demand during the month for which the bill is rendered; or - 2. 50% of the Contract Demand shall be compared to the On-Peak Billing...

AI summary The text defines the methodology for calculating 'Economy Demand' for billing purposes. It establishes that Economy Demand is determined by identifying the larger of two values: the maximum integrated thirty-minute demand during the billing month, or 50% of the Contract Demand compared to the On-Peak Billing Demand. If the resulting figure exceeds the On-Peak Billing Demand, the difference constitutes the Economy Demand.

MINIMUM BILL
MINIMUM BILL The minimum bill shall be the bill calculated on the Rate above including the Basic Facilities Charge, Demand Charge and Energy Charge, but the sum of the On-Peak Demand Charge and the Economy Demand Charge shall not be less t...

AI summary The text defines the calculation of the minimum bill for customers, which is based on the Rate including the Basic Facilities Charge, Demand Charge, and Energy Charge. It specifies a floor for the sum of the On-Peak Demand Charge and the Economy Demand Charge at $1.64 per month per KW of Contract Demand. Additionally, the Company reserves the right to adjust the minimum bill based on the maximum integrated demand from the preceding twelve months if the customer's measured demand exceeds their Contract Demand.

POWER FACTOR CORRECTION
POWER FACTOR CORRECTION When the average monthly power factor of the Customer's power requirements is less than 85 percent, the Company may correct the integrated demand in kilowat1s for that month by multiplying by 85 percent and dividing...

AI summary The document outlines the rules for power factor correction applied to customer power requirements. If a customer's average monthly power factor falls below 85 percent, the Company is permitted to adjust the integrated demand in kilowatts for that month. The correction is calculated by multiplying the demand by 85 percent and then dividing by the actual average power factor for that month.

RJDER IS (NC) INTERRUPTIBLE POWER SERVICE
RJDER IS (NC) INTERRUPTIBLE POWER SERVICE Available at the Company's option to non-residential customers receiving concurrent service from the Company on Schedules G, GA, I, GT, IT, or OPT who are not served under Rider SCG. Under this Rid...

AI summary The document describes the RJDER IS (NC) Interruptible Power Service, a provision available to non-residential customers on specific schedules (G, GA, I, GT, IT, or OPT) who are not under Rider SCG. Under this rider, customers agree to reduce and maintain their load at specified levels upon the Company's request. The Company reserves the right to request service interruptions at any time during capacity problems, subject to the terms of individual contracts.

I. General Provisions:
I. General Provisions: Contracts for interruptible power service will be accepted by the Company on the basis of successive contracts, and each contract shall specifY an interruptible, integrated demand of not more than 50,000 KW to be sub...

AI summary This section outlines the general provisions for interruptible power service contracts. The Company accepts successive contracts with an integrated demand limit of 50,000 KW per contract, capped at a total of 1,100,000 KW across all nonresidential schedules. Customers may opt to apply these provisions to specific submetered portions of their load. The Company reserves the right to conduct annual tests of the rider provisions with advance notice and may terminate continued service if a customer fails to perform satisfactorily during requested interruptions.

4. Credit and Credit Computation:
4. Credit and Credit Computation: Each month, a determination of the interruptible capacity available to the Company will be made in order to compute a credit. All energy consumed at a level above the Firm Contract Demand during the Exposu...

AI summary The document outlines the methodology for calculating monthly credits for customers under an interruptible power service. The credit is based on the Effective Interruptible Demand (EID), which is calculated by dividing the energy consumed above the Firm Contract Demand during the Exposure Period (excluding Interruption Periods) by the duration of those periods. This figure is then reduced by the monthly maximum demand occurring during any Interruption Period. The final credit amount is determined by multiplying the EID by a rate of $3.50 per kilowatt.

5. Penalty and Penalty Computation:
5. Penalty and Penalty Computation: Should the Customer fail to reduce and maintain his load at, or below the Finn Contract Demand during any Interruption Period, a penalty will be applied to the Customer's account for the month of occurre...

AI summary This section outlines the penalty structure and additional charges for customers utilizing interruptible power services. Customers are penalized if they fail to maintain their load at or below the Firm Contract Demand during Interruption Periods, with the penalty calculated as the sum of Penalty Demands multiplied by $10.00. Additionally, an 'Extra Facilities Charge' of 1.7% of the installed cost of necessary extra facilities (minimum $25) is applied monthly.

7. Contract Period:
7. Contract Period: Contracts with interruptible load provisions shall be for a minimum original term of five (5) years and thereafter until terminated, by giving at least twelve (12) months' previous notice of such termination in writing,...

AI summary The text outlines the contractual terms for interruptible load provisions, specifying a minimum original term of five years with a 12-month notice period for termination. It establishes the Company's right to terminate a contract if a Customer fails to maintain load at or below the Firm Contract Demand during three or more Interruption Periods or violates other terms. Additionally, it mandates early termination charges for customers requesting amendments or termination before the initial term expires.

USE OF RIDER
USE OF RIDER Since adjustments are already included in the Rates of the Company's current rate schedules which are effective for service on and after July 1, 2006, this Rider should not be used in addition to such rate schedules for bill c...

AI summary The document specifies that the Rider should not be applied to bill calculations for services rendered on or after July 1, 2006. This is because the necessary adjustments are already incorporated into the Company's current rate schedules. The text references a specific North Carolina Fifteenth Revised Leaf and an Order from the North Carolina Utilities Commission (NCUC) regarding these rate structures.

RATE:
RATE: I. Basic Facilities Charge $33.54 n. Demand Charge Summer Months Winter Months A. On-Peak Demand Charge per month June I -September 30 October I-May 31 For the first 2000 kW of Billing Demand per month $13.16 per kW $7.69 perkW For t...

AI summary The document presents a detailed rate structure for a utility service, specifically outlining the Basic Facilities Charge and Demand Charges. It differentiates between Summer and Winter months, providing tiered pricing for On-Peak Demand Charges based on Billing Demand (e.g., first 2000 kW, next 3000 kW, and over 5000 kW). Additionally, it specifies Energy Charges for On-Peak and Off-Peak periods, including the specific hours designated for each during the summer and winter seasons.

CONTRACT DEMAND
CONTRACT DEMAND The Company wiii require contracts to specify the maximum demand to be delivered to the Customer which shall be the Contract Demand. Where the Customer can restrict on-peak demand to levels considerably below that of the Co...

AI summary The text outlines the requirements for Contract Demand agreements between the Company and its customers. It specifies that contracts must define the maximum demand to be delivered. Additionally, it allows for the possibility of contracting for a limited On-Peak Contract Demand if the customer is able to restrict their on-peak demand to levels significantly lower than their total Contract Demand.

DETERMJNA TION OF BILLING DEMAND
DETERMJNA TION OF BILLING DEMAND - A. The On-Peak Billing Demand each month shall be the largest of the following: - !. The maximum integrated thirty-minute demand during the applicable summer or winter on-peak period during the month for...

AI summary The document specifies the methodology for determining the On-Peak Billing Demand for each month. It establishes that the billing demand is calculated as the largest value among three criteria: the maximum integrated thirty-minute demand during specific summer or winter on-peak periods, 50% of the Contract Demand (or On-Peak Contract Demand if specified), or a fixed floor of 15 kilowatts (kW).

B. Economy Demand
B. Economy Demand To det~rmine the Economy Demand, the larger of - !. The maximum integrated thirty-minute demand during the month for which the bill is rendered; or - 2. 50% of the Contract Demand shall be compared to the On-Peak Billing...

AI summary The document outlines the methodology for determining 'Economy Demand' for billing purposes. Economy Demand is calculated by identifying the larger value between the maximum integrated thirty-minute demand for the billing month and 50% of the Contract Demand compared to the On-Peak Billing Demand. If the result of the first calculation exceeds the On-Peak Billing Demand, the difference is established as the Economy Demand.

MINIMUM BILL
MINIMUM BILL The minimum bill shall be the bill calculated on the Rate above including the Basic Facilities Charge, Demand Charge and Energy Charge, but the sum of the On-Peak Demand Charge and the Economy Demand Charge shall not be less t...

AI summary The document defines the calculation of the minimum bill for customers, specifying that it includes the Basic Facilities Charge, Demand Charge, and Energy Charge. It establishes a floor for the sum of the On-Peak Demand Charge and the Economy Demand Charge at $1.49 per month per kW of Contract Demand. Additionally, it grants the Company the authority to adjust the minimum bill based on the maximum integrated demand from the previous twelve months if the Customer's measured demand exceeds the Contract Demand.

POWER FACTOR CORRECTION
POWER FACTOR CORRECTION When the average monthly power factor of the Customer's power requirements is less than 85 percent, the Company may correct the integrated demand in kilowatts for that month by multiplying by 85 percent and dividing...

AI summary The document outlines the methodology for power factor correction applied to a customer's integrated demand. It specifies that if a customer's average monthly power factor falls below 85 percent, the Company is permitted to adjust the integrated demand in kilowatts. This adjustment is calculated by multiplying the demand by 85 percent and then dividing by the customer's average power factor for that specific month.

RIDER IS (SC) INTERRUPTIBLE POWER SERVICE
RIDER IS (SC) INTERRUPTIBLE POWER SERVICE Available at the Company's option to non-residential customers receiving concurrent service from the Company on Schedules G, GA. I, GT, IT, OPT, or PG. Under this Rider the Customer agrees, at the...

AI summary The text describes the 'Rider IS (SC) Interruptible Power Service,' which is an optional service available to non-residential customers on various rate schedules (G, GA, I, GT, IT, OPT, or PG). Under this rider, customers agree to reduce and maintain their electrical load at specified levels upon the Company's request. The Company reserves the right to interrupt service at any time when capacity problems occur, subject to the specific provisions of the individual contract.

I . General Provisions:
I . General Provisions: Contracts for interruptible power service will be accepted by the Company on the basis of successive contracts, and each contract shall specify an interruptible, integrated demand of not more than 50,000 KW to be su...

AI summary The text outlines the general provisions for interruptible power service contracts. The Company will accept successive contracts with an integrated demand limit of 50,000 KW per contract, capped at a total of 1,100,000 KW across all nonresidential schedules. Customers may opt to apply the rider only to submetered portions of their load. The Company reserves the right to conduct annual tests of the rider's provisions with advance notice, and continued service is contingent upon satisfactory customer performance during requested interruptions.

5. Penalty and Penalty Computation:
5. Penalty and Penalty Computation: Should the Customer fail to reduce and maintain his load at, or below, the Firm Contract Demand during any Interruption Period, a penalty will be applied to the Customer's account for the month of occurr...

AI summary The text outlines the penalty structure for customers on an Interruptible Power Service. If a customer fails to maintain their load at or below the Firm Contract Demand during an Interruption Period, a penalty is applied based on the sum of Penalty Demands (KW_P) multiplied by $10.00. Additionally, customers are billed a monthly 'Extra Facilities Charge' equivalent to 1.7% of the installed cost of the necessary extra facilities, with a minimum charge of $25.

7. Contract Period:
7. Contract Period: Contracts with interruptible load provisions shall be for a minimum original term of five (5) years and thereafter until terminated, by giving at least twelve (12) months' previous notice of such termination in V.'Titin...

AI summary This section outlines the contractual terms for interruptible load provisions, specifying a minimum original term of five years with a 12-month notice period for termination. It establishes the Company's right to terminate the contract if the Customer fails to maintain load at or below the Firm Contract Demand during three or more Interruption Periods or violates other Rider terms. Additionally, it notes that Customers requesting early termination before the initial term expires are subject to early termination charges.

N-40RIRs Attachment SEB-NSPI - 2a, pt. 4 (Large File - 19 MB) 132 passages
LARGE POWER SERVICE RATE SCHEDULE "P"
LARGE POWER SERVICE RATE SCHEDULE "P" AVAILABLE at a single point of delivery for balanced three-phase power of not less than 10,000 kilovolt-amperes at prevailing line voltages above 100,000 volts, except that loads lower than 10,000 kilo...

AI summary The document defines the eligibility criteria for the Large Power Service Rate Schedule 'P'. This schedule is intended for balanced three-phase power with a minimum capacity of 10,000 kilovolt-amperes at line voltages exceeding 100,000 volts. An exception is noted for loads smaller than 10,000 kilovolt-amperes that were already being served under this schedule as of April 3, 1971, which remain eligible. Service requires the execution of an Electric Service Agreement.

Demand Charge
Demand Charge First 3,000 kilovolt-amperes ............................................................................................•... $7.923 per kilovolt-ampere Next 14,000 kilovolt-amperes .................... .........................

AI summary The document specifies the tiered rate structure for demand charges based on kilovolt-amperes (kVA). It establishes three pricing tiers: the first 3,000 kVA are charged at $7.923 per kVA, the next 14,000 kVA at $7.456 per kVA, and any additional kVA at a rate of $7.104 per kVA.

Energy Charge
Energy Charge All kilowatt-hours ....................................... .......................................................................... $0.02198 per kilowatt-hour

AI summary The document specifies a fixed rate for the Energy Charge, established at $0.02198 per kilowatt-hour for all kilowatt-hours consumed.

Demand
Demand The maximum kilovolt-amperes integrated over any 30-minute interval plus 15% of any excess of maximum instantaneous single operating peak over 150% of the maximum 30-mlnute value shall constitute the demand.

AI summary The document provides a technical definition for 'demand' in a regulatory context. It specifies that demand is calculated as the maximum kilovolt-amperes integrated over any 30-minute interval, supplemented by 15% of any excess of the maximum instantaneous single operating peak over 150% of that maximum 30-minute value.

Billing Demand
Billing Demand The billing demand for any month shall be the maximum demand measured during on-peak hours as hereinafter defined plus 15% of the excess of the maximum off-peak demand over such on-peak demand but in no case shall be less th...

AI summary The text defines the methodology for calculating monthly billing demand for electricity service. It establishes that billing demand is based on the maximum demand measured during on-peak hours (Monday through Saturday, 7:00 A.M. to 10:00 P.M.), plus 15% of the excess of maximum off-peak demand over on-peak demand. It also sets minimum billing demand thresholds based on the service point's establishment date, the capacity specified in the Electric Service Agreement, or 70% of the previous 12 months' highest billing demand.

MINIMUM BILL
MINIMUM BILL The demand charge shall constitute the monthly minimum bill.

AI summary The document specifies the structure of the monthly minimum bill for customers, stating that the demand charge is the component used to establish this minimum amount.

LOCAL TAX ADJUSTMENT
LOCAL TAX ADJUSTMENT Within municipalities or political subdivisions which impose taxes based upon the amount of electric service sold or revenues received by the Company, as specified in Rule No. 18 of "Rules and Regulations for Electric...

AI summary The document outlines the procedure for applying local tax adjustments to customer bills. It specifies that in municipalities or political subdivisions where taxes are levied based on the volume of electric service sold or the revenue received by the Company, a surcharge must be added to the total bill. The specific percentage for this surcharge is determined by the values provided on Sheet No. 5A of the 'Rules and Regulations for Electric Service'.

(N) TEMPORARY SURCHARGE
(N) TEMPORARY SURCHARGE A Temporary Surcharge rate shall apply, as outlined on Sheet No. 5F1 of this tariff.

AI summary The document specifies the application of a Temporary Surcharge rate as part of the tariff, referencing a specific sheet (Sheet No. 5F1) for the detailed rate structure.

(N) Denotes New
(N) Denotes New Issued by Authority of an Order of the Public Service Commission of West Virginia in Case No. 87-0669-E-C, dated April13, 2006 Issued by J. H. Richardson President Issued: May 3, 2006 Effective: April 21 , 2006 MONONGAHELA...

AI summary This document is a formal notice regarding the Eighteenth Revision of Original Sheet No. 14A2 P.S.C. W. Va. No. 21, issued by the Public Service Commission of West Virginia. The revision, issued by J. H. Richardson, cancels the previous seventeenth revision. The filing is made by Monongahela Power Company (doing business as Allegheny Power) and became effective on April 21, 2006.

LARGE POWER SERVICE RATE SCHEDULE "P" (Continued)
LARGE POWER SERVICE RATE SCHEDULE "P" (Continued) TERM The initial term of Electric Service Agreement for service under this schedule shall be 5 years. Agreement shall remain in force thereafter until twelve months after written notice of...

AI summary This document excerpt outlines the terms and general provisions for the Large Power Service Rate Schedule 'P' for Allegheny Power (Monongahela Power Company). It specifies an initial five-year agreement term, notice requirements for cancellation, and constraints on changing agreement capacity. It also notes that customers are responsible for providing protective equipment and that the schedule primarily applies to customers purchasing their entire electrical requirements from the company.

TEMPORARY SURCHARGE
TEMPORARY SURCHARGE For Bills rendered on and after April 21, 2006, there shall be a Temporary Surcharge as set forth below consistent with a Commission Order in Case No. 87-0669-E-C dated April 13, 2006. This Surcharge is subject to recon...

AI summary The document establishes a Temporary Surcharge for bills rendered on or after April 21, 2006, as mandated by Commission Order Case No. 87-0669-E-C. This surcharge is subject to reconciliation and is intended to remain in effect until a new ENEC proceeding or equivalent fuel recovery mechanism is established. The surcharge is included in the minimum charge of the Rate Schedule and is applied to customer bills prior to the calculation of tax surcharges.

TEMPORARY SURCHARGE
TEMPORARY SURCHARGE Rate Schedule Rate per kW/kVa Rate per kWh A $0.00037 8 0.00039 c 0.00035 CSH 0.00044 D $0.140 K 0.138 p 0.143 AGS 0.006 Lighting 0.00022 (N) Denotes New

AI summary The document provides a table outlining the specific rates for a 'Temporary Surcharge' across various rate schedules. It lists the rate per kW/kVa and/or rate per kWh for multiple schedules, including A, 8, c, CSH, D, K, p, AGS, and Lighting. The table serves as a formal notice of the surcharge amounts applicable to different customer classes.

AVAILABILITY
AVAILABILITY This Schedule is available on a voluntary basis for electric service used by a nonresidential customer with either a Contract Demand that equals or exceeds 1,000 kW or whenever the registered or computed demand equals or excee...

AI summary The text outlines the eligibility criteria for a specific electric service Schedule. It is available voluntarily to nonresidential customers with a Contract Demand or computed demand of 1,000 kW or greater over the preceding 12 months. Conversely, the Schedule is explicitly excluded for breakdown, standby, or supplementary services (unless used with specific riders for at least one year), resale services, short-term or temporary services, and new customers with a Contract Demand exceeding 100,000 kW.

APPLICABILITY
APPLICABILITY This Schedule is applicable to all electric service of the same available type supplied to Customer's premises at one point of delivery through one meter.

AI summary The provided text defines the scope of applicability for a specific Schedule, stating that it applies to all electric services of the same available type delivered to a customer's premises at a single point of delivery using a single meter.

CONTRACT DEMAND
CONTRACT DEMAND The Contract Demand shall be the kW of demand specified in the Service Agreement.

AI summary The document defines 'Contract Demand' as the specific kilowatt (kW) of demand that is stipulated within a Service Agreement.

II. kW Demand Charg:e:
II. kW Demand Charg:e: Service Rendered During the Calendar Months Of: June through September October through May A. On-Peak Billing Demand: First 5,000 kW of Billing Demand $19.56perkW $14.25 per kW For the next 5,000 kW of Billing Demand...

AI summary The document outlines the kW Demand Charge structure for a specific service, categorized by billing demand tiers and seasonal periods. It specifies different rates for the first 5,000 kW, the next 5,000 kW, and all demand exceeding 10,000 kW, with higher rates applied during the June through September period compared to October through May. Off-peak excess billing demand is listed at a flat rate of $1.00 per kW.

IV. Transformation Discounts:
IV. Transformation Discounts: When Customer owns the step-down transformation and all other facilities beyond the transformation which Company would normally own, except Company's metering equipment, the charge per kW of on-peak Billing De...

AI summary The document outlines 'Transformation Discounts' applied to customers who own their own step-down transformation and subsequent facilities. These discounts reduce the charge per kW of on-peak Billing Demand and per kWh for both transmission and distribution services. Specific ownership requirements and voltage thresholds (e.g., 69 kV, 115 kV, or 230 kV for transmission; 12.47 kV or higher for distribution) must be met to qualify. It also specifies conditions regarding metering, additional facilities, and the potential for discount reclassification due to system changes.

V. Minimum Bill:
V. Minimum Bill: The minimum monthly charge shall be the Basic Customer Charge plus a charge for 1,000 kW at the off-peak excess demand rate.

AI summary The document specifies the calculation for the minimum monthly bill for customers. It defines the minimum charge as the sum of the Basic Customer Charge and a charge based on 1,000 kW at the off-peak excess demand rate.

BILLING DEMANDS
BILLING DEMANDS - I. The on-peak Billing Demand shall be the maximum demand registered or computed by or from Company's metering facilities used in the on-peak hours of the current month during any 15-minute interval. - II. The off-peak ex...

AI summary The document defines the methodology for calculating Billing Demand for electricity customers. It establishes that 'on-peak Billing Demand' is based on the maximum demand recorded during any 15-minute interval during on-peak hours in the current month. Conversely, 'off-peak excess Billing Demand' is calculated by taking the maximum demand from any 15-minute interval during off-peak hours and subtracting the on-peak Billing Demand.

I. On-Peak Hours:
I. On-Peak Hours: A. Service used beginning at 12:00 midnight March 31 and ending at 12:00 midnight September 30: The on-peak hours are defined as the hours between 10:00 a.m. and 10:00 p.m., Monday through Friday, excluding holidays consi...

AI summary The text defines the specific timeframes for 'on-peak' electricity service during two different periods of the year. From March 31 to September 30, on-peak hours are 10:00 a.m. to 10:00 p.m., Monday through Friday. From September 30 to March 31, on-peak hours are divided into two blocks: 6:00 a.m. to 1:00 p.m. and 4:00 p.m. to 9:00 p.m., Monday through Friday, with holidays excluded.

II. Off-Peak Hours:
II. Off-Peak Hours: The off-peak hours in any month are defined as all hours not specified above as on-peak hours. All hours for the following holidays will be considered off-peak: New Year's Day, Good Friday, Memorial Day, Independence Da...

AI summary The document defines the criteria for off-peak hours, stating they encompass all hours not designated as on-peak within a given month. It specifically lists various holidays that are automatically classified as off-peak, including New Year's Day, Good Friday, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, and Christmas Day. It also provides rules for adjusting off-peak classifications when these holidays fall on a Saturday or Sunday, designating the preceding Friday or following Monday as off-peak respectively.

POWER FACTOR ADJUSTMENT
POWER FACTOR ADJUSTMENT When the power factor in the current billing month is less than 85%, the monthly bill will be increased by a sum equal to $0.40 multiplied by the difference between the maximum reactive kilovolt-amperes (kV Ar) regi...

AI summary The document describes a specific billing mechanism for a power factor adjustment. If a customer's power factor falls below 85% during a billing month, an additional charge is applied. This charge is calculated by multiplying a rate of $0.40 by the difference between the maximum reactive kilovolt-amperes (kV Ar) recorded during a 15-minute interval and 62% of the maximum kW demand registered for that month.

RIDER APPLICATIONS
RIDER APPLICATIONS When this Schedule is used in conjunction with any applicable rider, the charges, if any, as stated in the rider will be adjusted to reflect the on-peak and off-peak periods and on-peak and off-peak charges in this Sched...

AI summary The document clarifies the interaction between specific rider charges and the general charges outlined in the Schedule. It specifies that rider charges will automatically adjust to align with the on-peak and off-peak periods and rates defined in the Schedule, unless the rider explicitly stipulates different periods or specific charges.

II. Experience Modification Rider No. 59.11
II. Experience Modification Rider No. 59.11 Pursuant to North Carolina General Statute 62-133.2 and Docket No. E-2, Sub 889, the Monthly Rate includes an increment of 0.506 cents per kilowatt-hour, effective for service rendered on and aft...

AI summary The text describes Experience Modification Rider No. 59.11, which establishes a monthly rate increment of 0.506 cents per kilowatt-hour. This rider applies to service rendered between October 1, 2006, and September 30, 2007, as mandated by North Carolina General Statute 62-133.2 and Docket No. E-2, Sub 889. It specifically supersedes Schedule LGS-TOU-6 for the same period.

AVAILABILITY
AVAILABILITY This Rider is available on a voluntary basis in conjunction with Company's Large General Service and Large General Service (Time-of-Use) Schedules for electric service used by a nonresidential customer provided Customer contra...

AI summary The text outlines the availability and eligibility criteria for a specific Rider related to large nonresidential electric service. The Rider is voluntary and applies to customers with contracts of at least 1,000 kW on Large General Service or Large General Service (Time-of-Use) Schedules, specifically for loads subject to curtailment. It is capped at a total system curtailable load of 300,000 kW and is explicitly excluded for short-term or temporary service.

MONTHLY RATE
MONTHLY RATE The Monthly Rate shall be an amount computed under the Large General Service or Large General Service (Time-of-Use) Schedule for the Billing Demand and the kilowatt-hours used during the current month, less a discount of$4.20...

AI summary The text defines the calculation method for the Monthly Rate under the Large General Service and Large General Service (Time-of-Use) Schedules. It specifies that the rate is based on Billing Demand and kilowatt-hours consumed during the current month. Additionally, it establishes a specific discount of $4.20 per kW for Billing Demand that exceeds Firm Demand, noting that for Time-of-Use Schedules, the on-peak Billing Demand must be used for this calculation.

1. FIRM DEMAND
1. FIRM DEMAND The Firm Demand shall be the kW of demand specified in the Service Agreement to which Customer shall reduce his requirement at the time specified by Company. Company at all times will endeavor to make available to Customer t...

AI summary The text defines 'Firm Demand' as the specific kilowatt (kW) demand capacity agreed upon in a Service Agreement. It stipulates that the Customer is responsible for reducing their requirement at the time designated by the Company. Additionally, it establishes that the Company will make every effort to ensure the specified Firm Demand is available to the Customer at all times.

2. CURTAILABLE DEMANDS
2. CURTAILABLE DEMANDS Curtailable Demands shall be the kW of demand registered or computed by or from Company's metering facilities during each 15-minute interval in the current billing month less the Firm Demand but not less than zero.

AI summary The document provides a technical definition for 'Curtailable Demands' within a utility tariff or regulatory framework. It defines these demands as the kilowatt (kW) of demand registered or computed by the Company's metering facilities during each 15-minute interval of the current billing month, excluding the Firm Demand, with a minimum floor of zero.

3. CONTRACTDEMAND
3. CONTRACTDEMAND The Contract Demand shall be the maximum kW of demand Customer requires Company to supply for the operation of Customer's facility. When this Rider is used in conjunction with the applicable standby or generation service...

AI summary This section defines the 'Contract Demand' as the maximum kilowatt (kW) capacity a customer requires for facility operations. It specifies that when used with standby or generation service riders, standby service cannot replace curtailable load. Additionally, it establishes that Contract Demand is subject to curtailment down to the Firm Demand level.

4. CURTAILABLE PERJOD
4. CURTAILABLE PERJOD The Curtailable Period shall be an eight-hour period unless Company specifies a shorter period at the time the Customer is notified. Customer shall be given a minimum of 30-minutes notice before requested curtailment...

AI summary The text defines the parameters for the 'Curtailable Period,' which is generally an eight-hour window during which the Company may request a Customer to reduce their energy requirements. Customers must receive at least 30 minutes of notice. The Company distinguishes between Capacity Level 1 (where firm energy purchases are anticipated) and Capacity Level 2 (where firm energy purchases are not anticipated) curtailments. The Company's determination of the level is binding, and it is not liable if notice is not received despite using reasonable diligence. Annual capacity curtailment is capped at 400 hours.

1. DURJNG A LEVEL 2 CAPACITY CURTAILMENT PERJOD
1. DURJNG A LEVEL 2 CAPACITY CURTAILMENT PERJOD For the maximum Curtailable Demand registered or computed by or from Company's metering facilities, during a Level 2 Capacity Curtailment Period, Customer's monthly bill will be increased sub...

AI summary The text outlines the billing structure for customers who have contracted to curtail demand during a Level 2 Capacity Curtailment Period. It specifies a tiered pricing model where the discount per kW increases by 10% for the second use and 20% for subsequent uses within a billing month. The calculation also accounts for the duration of the contract and the history of the customer's Curtailable Demand over the preceding 11 months, including provisions for credits and exclusions for Level 1 curtailment periods.

2. DURING A LEVEL 1 CAPACITY CURTAILMENT PERJOD
2. DURING A LEVEL 1 CAPACITY CURTAILMENT PERJOD For use of Curtailable Demand during a Level 1 Capacity Curtailment Period, the Customer shall pay to Company, $2.10 per kWh for all kilowatt-hours attributable to all Curtailable Demands dur...

AI summary The text defines the pricing structure for Curtailable Demand during a Level 1 Capacity Curtailment Period. Customers are required to pay a specific rate of $2.10 per kWh for all kilowatt-hours associated with Curtailable Demands during such periods, in addition to any applicable kilowatt-hour charges specified in the rate schedule where the Rider is utilized.

MINIMUM NUMBER OF KILOWATT-HOURS
MINIMUM NUMBER OF KILOWATT-HOURS The minimum number of kilowatt-hours attributable to all Curtailable Demands shall not be less than 50 kWh per kW of the maximum Curtailable Demand during the current billing month. For use with the Large G...

AI summary The document specifies the minimum kilowatt-hour (kWh) requirements for Curtailable Demands, establishing a floor of 50 kWh per kW of the maximum Curtailable Demand for the current billing month. It further clarifies that for the Large General Service (Time-of-Use) Schedule, any kilowatt-hours billed under this provision exceeding the registered amount will be charged at the off-peak kilowatt-hour rate.

CONTRACT PERIOD
CONTRACT PERIOD The Contract Period shall be on a monthly basis for the first 12 months service is provided under this Rider and can be terminated by either party by giving written notice to the other party. Following the initial 12 months...

AI summary The text outlines the terms of the Contract Period for a specific Rider, establishing a monthly service basis for the first 12 months with a termination option for both parties. After the initial year, the contract automatically extends for five years, followed by successive two-year extensions unless a 60-day written notice is provided. It also specifies the rules for adjusting the difference between Contract Demand and Firm Demand, limiting reductions to 20% at specific annual intervals.

GENERAL
GENERAL Service rendered under this Rider is subject to the provisions of the Service Regulations of the Company on file with the state regulatory commission. Supersedes Rider No. 58C Effective for service rendered on and after October I,...

AI summary The text establishes the general regulatory framework for a specific Rider, noting that services provided under this Rider are governed by the Company's Service Regulations, which are on file with the state regulatory commission. It further clarifies that this Rider supersedes Rider No. 58C, effective as of October 1, 2003, and identifies Carolina Power & Light Company (operating as Progress Energy Carolinas, Inc. in South Carolina) as the relevant entity.

AVAILABILITY
AVAILABILITY This Schedule is available on a voluntary basis for electric service used by a nonresidential customer with either a Contract Demand that equals or exceeds 1,000 kW or whenever the registered or computed demand equals or excee...

AI summary This section outlines the eligibility criteria for a specific electric service schedule. The schedule is available voluntarily to nonresidential customers whose contract or computed demand is at least 1,000 kW over the preceding 12 months. It explicitly excludes breakdown, standby, or supplementary services (unless used with specific riders for at least one year), resale services, short-term or temporary services, and new customers with a Contract Demand exceeding 100,000 kW.

APPLICABILITY
APPLICABILITY This Schedule is applicable to all electric service of the same available type supplied to Customer's premises at one point of delivery through one meter.

AI summary The document specifies the scope of applicability for the Schedule, stating that it applies to all electric services of the same type provided to a customer's premises at a single point of delivery using a single meter.

CONTRACT DEMAND
CONTRACT DEMAND The Contract Demand shall be the kW of demand specified in the Service Agreement.

AI summary The document defines 'Contract Demand' as the specific kilowatt (kW) of demand stipulated within the Service Agreement. This establishes the baseline for the capacity requirements agreed upon between the utility and the customer.

$425.00
$425.00 II. kW Demand Charge: Service Rendered During the Calendar Months Of: June through September October throu eh May A. On-Peak Billing Demand: First 5,000 kW of Billing Demand $18.71 per kW $13.68 per kW For the next 5,000 kW of Bill...

AI summary The document outlines the kW Demand Charge rates for the LGS-TOU-7 tariff. It specifies a tiered pricing structure for On-Peak Billing Demand, where the rate per kW decreases as demand exceeds specific thresholds: the first 5,000 kW, the next 5,000 kW, and all demand exceeding 10,000 kW. Rates differ between the June through September period and the October through May period.

III. kWh Energy Charge:
III. kWh Energy Charge: 4.023¢ per on-peak kWh 3.523¢ per off-peak kWh

AI summary The document specifies the electricity net energy charge rates for the LGS-TOU-7 Tariff, distinguishing between on-peak and off-peak usage. The rate is set at 4.023¢ per on-peak kWh and 3.523¢ per off-peak kWh.

IV. Transformation Discounts:
IV. Transformation Discounts: When Customer owns the step-down transfonnation and all other facilities beyond the transformation which Company would normally own, except Company's metering equipment, the charge per kW of on-peak Billing De...

AI summary The text outlines the criteria and specific discount rates for customers who own their own step-down transformation facilities and associated infrastructure. It defines 'Transmission Service Transformation Discounts' and 'Distribution Service Transformation Discounts' based on the voltage of the service line (e.g., 69 kV to 230 kV for transmission; 12.47 kV or higher for distribution). It specifies eligibility requirements, such as the exclusion of customer-specific substations, and notes that the Company retains metering options and the right to adjust discounts if system conditions change.

V. Minimum Bill:
V. Minimum Bill: The minimum monthly charge shall be the Basic Facilities Charge plus a charge for 1,000 kW at the off-peak excess demand rate.

AI summary The document specifies the calculation for the minimum monthly charge. It is defined as the sum of the Basic Facilities Charge and a specific charge for 1,000 kW at the off-peak excess demand rate.

BILLING DEMANDS
BILLING DEMANDS - I. The on-peak Billing Demand shall be the maximum demand registered or computed by or from Company's metering facilities used in the on-peak hours of the current month during any 15-minute interval. - II. The off-peak ex...

AI summary The text defines the methodology for calculating 'Billing Demand' under the LGS-TOU-7 Tariff. It specifies that 'on-peak Billing Demand' is determined by the maximum demand recorded during any 15-minute interval during on-peak hours in a given month. Additionally, it defines 'off-peak excess Billing Demand' as the maximum demand registered during any 15-minute interval in off-peak hours that exceeds the established on-peak Billing Demand.

II. Off-Peak Hours:
II. Off-Peak Hours: The off-peak hours in any month are defmed as all hours not specified above as on-peak hours. All hours for the following holidays will be considered off-peak: New Year's Day, Good Friday, Memorial Day, Independence Day...

AI summary The text defines the parameters for off-peak hours within a time-of-use (TOU) tariff structure. It specifies that off-peak hours comprise all hours not designated as on-peak. Additionally, it lists specific holidays—including New Year's Day, Good Friday, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, and Christmas Day—as off-peak. It also includes rules for holiday adjustments when they fall on weekends, designating the preceding Friday or following Monday as off-peak.

POWER FACTOR ADnJSTMENT
POWER FACTOR ADnJSTMENT When the power factor in the current billing month is less than 85%, the monthly bill will be increased by a sum equal to $0.30 multiplied by the difference between the maximum reactive kilovolt-amperes (kV Ar) regi...

AI summary The document outlines the Power Factor Adjustment calculation for the LGS-TOU-7 Tariff. It specifies that if a customer's power factor falls below 85% in a billing month, an additional charge is applied. This charge is calculated by multiplying the difference between the maximum reactive kilovolt-amperes (kV Ar) and 62% of the maximum kW demand by a rate of $0.30.

SALES AND FRANCHISE TAX OR PAYMENT IN LIEU THEREOF
SALES AND FRANCHISE TAX OR PAYMENT IN LIEU THEREOF To the above charges will be added any applicable South Carolina sales tax, and for those customers within any municipal or other local govenunental jurisdiction, an appropriate amount to...

AI summary The text specifies that additional charges will be applied to the rates above, including any applicable South Carolina sales tax. Furthermore, customers located within municipal or other local governmental jurisdictions will be charged an amount reflecting franchise fees, business license taxes, or similar percentage fees or charges in lieu thereof imposed by those specific entities.

RIDER APPLICATIONS
RIDER APPLICATIONS When this Schedule is used in conjunction with any applicable rider, the charges, if any, as stated in the rider will be adjusted to reflect the on-peak and off-peak periods and on-peak and off-peak charges in this Sched...

AI summary The text specifies the interaction between the Schedule and applicable riders regarding electricity charges. It establishes that unless a rider explicitly defines unique on-peak and off-peak periods and charges, the charges stated in the rider will be automatically adjusted to align with the on-peak and off-peak periods and charges defined in the Schedule.

GENERAL
GENERAL Service rendered under this Schedule is subject to the provisions of the Service Regulations and any changes therein, substitutions therefor, or additions thereto lawfully made. Supersedes Schedule LGS-TOU-4 Effective for bills ren...

AI summary This section outlines the general terms for the LGS-TOU-7 tariff, noting that services are governed by the Service Regulations, including any legal amendments or substitutions. It specifies that this schedule supersedes the previous LGS-TOU-4 schedule effective from July 1, 2006. The document identifies Carolina Power & Light Company, operating as Progress Energy Carolinas, Inc. in South Carolina, as the relevant service provider.

AVAILABILITY
AVAILABILITY This Rider is available on a voluntary basis in conjunction with Company's Large General Service and Large General Service (Time-of-Use) Schedules for electric service used by a nonresidential customer provided Customer contra...

AI summary The text describes the availability and conditions of a specific Rider for nonresidential customers. The Rider is voluntary and must be used in conjunction with Large General Service and Large General Service (Time-of-Use) Schedules for contracts of at least 1,000 kW that are subject to curtailment. The total system curtailable load for this Rider is capped at 150,000 kW. It explicitly excludes short-term or temporary service and modifies existing schedules only as specified.

MON'JBL Y RATE
MON'JBL Y RATE The Monthly Rate shall be an amount computed under the Large General Service or Large General Service (Time-of-Use) Schedules for the Billing Demand and the kilowatt-hours used during the current month, less a discount of $5...

AI summary The text defines the calculation methodology for the Monthly Rate under the Large General Service and Large General Service (Time-of-Use) Schedules. It specifies that the rate is based on Billing Demand and kilowatt-hours used during a month, with a specific discount of $5.00 per kW for Billing Demand exceeding Firm Demand. For Time-of-Use Schedules, the discount is specifically tied to the on-peak Billing Demand.

3. CONTRACT DEMAND
3. CONTRACT DEMAND The Contract Demand shall be the maximum kW of demand Customer requires Company to supply for the operation of Customer's facility. When this Rider is used in conjunction with the applicable standby or generation service...

AI summary This section defines 'Contract Demand' as the maximum kilowatt (kW) demand a customer requires the Company to supply for facility operations. It specifies that when used with standby or generation service riders, standby service cannot replace curtailable load. Additionally, it establishes that Contract Demand is subject to curtailment down to the Firm Demand level.

4. CURTAILABLE PERIOD
4. CURTAILABLE PERIOD The Curtailable Period shall be an eight-hour period unless Company specifies a shorter period at the time Customer is notified. Customer shall be given a minimum of 30-minutes notice before RIDER-58E Sheet 1 of3 requ...

AI summary The text defines the 'Curtailable Period' for customers under RIDER-58E, establishing an eight-hour maximum duration per 24-hour period, with a total annual cap of 400 hours. Customers must receive at least 30 minutes' notice before requested curtailments. The Company distinguishes between Capacity Level 1 and Level 2 curtailments based on the availability of reserves and firm energy purchases. The Company's determination of the curtailment level is binding, and it is not liable for missed notifications if reasonable diligence is exercised.

A. During a Level 2 Capacity Curtailment Period
A. During a Level 2 Capacity Curtailment Period For the maximum Curtailable Demand registered or computed by or from Company's metering facilities, during a Level 2 Capacity Curtailment Period, Customer's monthly bill will be increased sub...

AI summary The text outlines the billing mechanics for customers who contract to curtail demand during a Level 2 Capacity Curtailment Period under Rider-58E. It specifies a tiered pricing structure where the 'discount per kW' increases by 10% for the second instance of use in a billing month and by 20% for subsequent uses. The rider also defines specific rules for calculating payments and credits based on the elapsed months of the contract period and the historical peak of Curtailable Demand.

B. During a Level 1 Capacity Curtailment Period
B. During a Level 1 Capacity Curtailment Period For use of Curtailable Demand during a Level 1· Capacity Curtailment Period, the Customer shall pay to Company $2.50 per kWh for all kilowatt-hours attributable to all Curtailable Demands dur...

AI summary The text specifies the pricing structure for customers using Curtailable Demand during a Level 1 Capacity Curtailment Period. It establishes a charge of $2.50 per kWh for all kilowatt-hours attributable to Curtailable Demands during such periods within the current billing month. This charge is cumulative with any applicable kilowatt-hour charges already defined in the specific rate schedule associated with the Rider.

CONTRACT PERIOD
CONTRACT PERIOD The Contract Period shall be on a monthly basis for the first 12 months service is provided under this Rider and can be terminated by either party by giving written notice to the other party. Following the initial 12 months...

AI summary The text outlines the contractual terms for a specific Rider, establishing a monthly service basis for the first 12 months with a termination option for either party. After the initial year, the contract automatically renews for five years, followed by successive two-year extensions, unless terminated with 60 days' notice. It also specifies rules for adjusting the difference between Contract Demand and Firm Demand, limiting annual reductions to 20% of the difference specified in the Service Agreement.

GENERAL
GENERAL Service rendered under this Rider is subject to the provisions of the Service Regulations of the Company on file with the state regulatory commission. Supersedes Rider No. 58B Effective for bills rendered on and after July I, 2005...

AI summary The document provides general administrative information regarding Rider 58E. It specifies that services rendered under this Rider are governed by the Company's Service Regulations filed with the state regulatory commission. It also notes that this Rider supersedes Rider No. 58B, effective for bills rendered on or after July 1, 2005.

Term
Term Service through December 31, 2006. Any electric service the Company provides to Monsanto after the Termination Date shall be on terms and conditions and at prices to be established or approved by the Commission.

AI summary The text defines the termination of existing service terms for Monsanto effective December 31, 2006. It specifies that any electric service provided to Monsanto following this date will be subject to new terms, conditions, and pricing that must be established or approved by the Commission.

Monthly Charge
Monthly Charge Firm Power and Energy: Energy Charge: 16.31 mills per kilowatt hour Customer Charge: $283 per Billing Period Demand Charge: $8.81 per kW

AI summary The document specifies the monthly charges for Firm Power and Energy under a tariff structure. It outlines the Energy Charge at 16.31 mills per kilowatt-hour, a Customer Charge of $283 per billing period, and a Demand Charge of $8.81 per kilowatt. These figures represent the core components of the rate structure for the specified power service.

Interruptible Power and Energy:
Interruptible Power and Energy: Energy Charge: 16. 31 mills per kilowatt hour Demand Charge: $4.09 per kW

AI summary The document segment specifies the applicable rates for Interruptible Power and Energy, detailing the specific Energy Charge of 16.31 mills per kilowatt hour and a Demand Charge of $4.09 per kW.

Replacement Energy:
Replacement Energy: Adjusted Index Price multiplied by Replacement Energy. Submitted Under Advice Letter No. 06-06 ISSUED: August 14, 2006 EFFECTIVE: September 15, 2006 P.S.C.U. No. 47 • • • Original Sheet No. 9A.l

AI summary The text describes a calculation method for 'Replacement Energy' within a regulatory proceeding. It specifies that the value is determined by multiplying the Adjusted Index Price by the Replacement Energy amount. The document references a specific submission made under Advice Letter No. 06-06 and identifies the filing as P.S.C.U. No. 47, with an issuance date of August 14, 2006, and an effective date of September 15, 2006.

ELECTRIC SERVICE SCHEDULE NO. 9A
ELECTRIC SERVICE SCHEDULE NO. 9A STATE OF UTAH General Service - High Voltage Energy Time-of-Day Option CLOSED TO NEW SERVICE AVAILABILITY: At any point on the Company's interconnected system where there are facilities of adequate capacity...

AI summary This document outlines the terms for Electric Service Schedule No. 9A in the State of Utah. It specifies a General Service - High Voltage Energy Time-of-Day Option that is currently closed to new customers. The service is provided for alternating current, three-phase electricity at high voltages (46,000V or 69,000V+). It notes that while the Time-of-Day Option is available, customers remain responsible for non-contract demand minimum payment obligations resulting from specific facility investments by the Company.

MONT& Y BILL:
MONT& Y BILL: Customer Charge: $170.00 per Customer Facilities Charge: $1.54 per kW (continued) • • • P.S.C.U. No. 47 Original Sheet No. 9A.2

AI summary The document provides a specific pricing breakdown for the MONT& Y Bill, detailing the costs associated with the Power System Cost Update (PSCU) No. 47. It specifies a fixed Customer Charge of $170.00 per customer and a Facilities Charge of $1.54 per kW. The text serves as a reference for these specific rate components within the broader regulatory proceeding.

ELECTRIC SERVICE SCHEDULE NO. 9A- Continu.ed
ELECTRIC SERVICE SCHEDULE NO. 9A- Continu.ed MONTHLY BILL: (continued) Energy Charge: 5.9596¢ per kWh for all On-Peak kWh 2.5604¢ per kWh for all Off-Peak kWh Minimum: The monthly Customer Charge plus appropriate Facilities and Energy Char...

AI summary The document excerpt specifies the monthly energy charges for Electric Service Schedule No. 9A. It establishes distinct rates for On-Peak and Off-Peak energy consumption, set at 5.9596¢ per kWh and 2.5604¢ per kWh, respectively. Additionally, it defines the monthly minimum bill as the sum of the Customer Charge plus applicable Facilities and Energy Charges, and notes that all monthly bills are subject to adjustments as per Schedule 193.

TIME PERIODS:
TIME PERIODS: On-Peak: 7:00. a.m. to 11:00 p.m., Monday thru Friday, except holidays. Off-Peak: All'other times. Holidays include only New Year's Day, President's Day, · Memorial Day, Independence Day, Pioneer Day, Labor Day, Thanksgiving...

AI summary The text defines the specific time periods and technical requirements for On-Peak and Off-Peak electricity charges. On-Peak periods are designated as 7:00 a.m. to 11:00 p.m., Monday through Friday, excluding specific holidays. It also establishes the methodology for calculating 'Facilities kW' based on the 15-minute period of greatest use and specifies a Power Factor requirement of 90% lagging, noting a penalty for customers who fail to maintain this standard.

ELECTRIC SERVICE SCHEDULE NO. 9A- Continued
ELECTRIC SERVICE SCHEDULE NO. 9A- Continued FORCE MAJEURE: Neither Company nor Customer shall be subject to any liability or damages for inability to provide or receive service to the extent that such failure shall be due to causes beyond...

AI summary This section of Electric Service Schedule No. 9A outlines the Force Majeure provisions and governing regulations for service. It specifies that neither the Company nor the Customer is liable for service failures caused by events beyond their control, such as acts of God, war, or government actions, which result in a waiver of minimum billing demands. Additionally, it incorporates the Company's Electric Service Regulations, approved by the Public Service Commission of the State of Utah, into the service agreement.

All monthly bills calculated in accordance with the schedules listed below shall have applied the following Monthly Surcharge.
All monthly bills calculated in accordance with the schedules listed below shall have applied the following Monthly Surcharge. Schedules 1, 2 & 25 Schedule 6, 6A & 6B $0.13 $6.25 Schedule 7 Schedule 8 $0.05 $6.25 Schedule 9 & 9A $6.25 Sche...

AI summary The document specifies the application of a Monthly Surcharge to all monthly bills calculated according to various predefined schedules. It provides a detailed table mapping specific schedules (ranging from Schedule 1 to Schedule 33) to their corresponding surcharge amounts, which vary between fixed dollar amounts (e.g., $6.25) and per-unit rates (e.g., $0.13, $0.70, and $0.45).

Interim Credit
Interim Credit AVAILABILITY: At any point on the Company's interco:imected system. APPLICATION: This Schedule shall be applicable to all retail tariff CU$omers taking service under the terms contained in this Tariff. This Schedule will exp...

AI summary The document outlines the terms for an 'Interim Credit' available to all retail tariff customers on the Company's interconnected system. The credit is applied as a percentage decrease to the Monthly Charges of a customer's applicable schedule. The provision specifies that this Schedule is valid until its expiration on May 31, 2007.

Schedule 1 2.44% Schedule2 2.44% Schedule 3 2.44% Schedule 6 2.22% Schedule 6A 2.22% Schedule 6B 2.22% Schedule 7 2.86% Schedule 8 2.44% Schedule 9 2.44% Schedule 9A 2.44% Schedule 10 2.36% Schedule 11 . 2.86% Schedule 12 (Street Lighting)...

AI summary The document provides a schedule of percentage values associated with various numbered schedules (Schedule 1 through Schedule 21). These figures appear to represent specific rates, percentages, or adjustments applied to different categories of services or items, including street lighting and traffic signal systems. The values range from 0.00% to 2.86%.

MONTHLY BILL: (continued)
MONTHLY BILL: (continued) Schedule 23 2.22% Schedule 23B 2.22% Schedule 25 2.86% Schedule 31 2.44% P.S.C.U. No. 46 Original Sheet No. 193.1

AI summary The document provides a continuation of a table detailing specific percentage values associated with various schedules (Schedule 23, 23B, 25, and 31) within a Power System Cost Update (PSCU). These figures appear to represent rate components or cost allocations for the utility's monthly bill.

Demand Side Management (DSM) Cost Adjustment
Demand Side Management (DSM) Cost Adjustment PURPOSE: The DSM Cost Adjustment is designed to recover the costs incurred by the Company, since August 1, 2001, associated with Commission-approved demand side management expenditures. APPLICAT...

AI summary The document outlines the purpose and application of the Demand Side Management (DSM) Cost Adjustment. It is designed to recover costs incurred by the Company since August 1, 2001, for Commission-approved demand side management expenditures. The adjustment applies to all customers under the company's electric service schedules and was scheduled to remain in effect from April 1, 2004, until March 31, 2014, unless extended by a Commission order.

ELECTRIC SERVICE SCHEDULE NO. 193 - Continued
ELECTRIC SERVICE SCHEDULE NO. 193 - Continued MONTHLY BILL: In addition to the Monthly Charges contained in the Customer's applicable schedule, all monthly bills shall have the following percentage increases applied to the Power Charge, En...

AI summary This section of Electric Service Schedule No. 193 specifies that certain percentage increases will be applied to various components of a customer's monthly bill. These adjustments affect the Power Charge, Energy Charge, Facilities Charge, and Voltage Discount, in addition to any standard Monthly Charges defined in the customer's specific schedule.

Schedule 1 2.16%
Schedule 1 2.16% Schedule 2 2.16% Schedule 3 2.16% Schedule 6 2.13% Schedule 6A 2.16% Schedule 6B 2.13% Schedule 7\ 2.12% Schedule 8 2.12% Schedule 9 2.12% Schedule 9A 2.13% Schedule 10 2.16% Schedule 11\ 2.12% Schedule 12 (Street Lighting...

AI summary The provided text is a data table listing various Schedules associated with specific percentage adjustments. The adjustments range from 2.12% to 3.02%. Notably, Schedule 12 includes different rates for Street Lighting, Traffic and Other Signal Systems, and Metered Outdoor Nighttime Lighting. A specific note indicates that the adjustment for Schedules 7, 11, and 12 (Street Lighting) is applied to the Charge Per Lamp.

Preamble
\ \ The Adjustment for Schedule 31 customers shall be applied to Facilities Charges, Back-up Power Charges, and Excess Power Charges in addition to the applicable general service schedule charges. Ninth Revision of Sheet No. 48T.1 Cancelin...

AI summary The text specifies the application of the Adjustment for Schedule 31 customers. It clarifies that this adjustment is to be applied to Facilities Charges, Back-up Power Charges, and Excess Power Charges, in addition to the general service schedule charges. The document also notes the Ninth Revision of Sheet No. 48T.1, which cancels the Eighth Revision of the same sheet.

PACIFIC POWER & LIGHT COMPANY
PACIFIC POWER & LIGHT COMPANY FOR COMMISSION'S RECEIPT STAMP SCHEDULE 48T LARGE GENERAL SERVICE - METERED TIME OF USE 1,000 KW AND OVER

AI summary This document fragment is a title page or heading for Schedule 48T, which pertains to the Pacific Power & Light Company. It specifically addresses the 'Large General Service - Metered Time of Use' rate category for customers with a demand of 1,000 kW and over. The document is intended for the Commission's receipt stamp.

APPLICABLE:
APPLICABLE: This Schedule is applicable to electric service loads which have exceeded 999 kW in more than one month of any consecutive 18-month period. This schedule will remain applicable until Customer fails to exceed 999 kW for a period...

AI summary The text defines the applicability criteria for a specific electric service schedule, targeting loads exceeding 999 kW for more than one month within a consecutive 18-month period. It specifies that this classification remains until the customer maintains a load below 999 kW for 36 consecutive months. Additionally, it mandates separate metering for multiple delivery points or voltage classifications and requires special contracts for intermittent, fluctuating, or seasonally disconnected loads. Partial requirements for loads of 1,000 kW and over are governed by Schedule 47T.

MONTHLY BILLING:
MONTHLY BILLING: The Monthly Billing shall be the sum of the Basic, Demand, Energy, and Reactive Power Charges; plus applicable Metering and Delivery Adjustments. All Monthly Billings shall be adjusted in accordance with Schedules 91, 98 a...

AI summary The text outlines the components of the Monthly Billing for customers, which is calculated as the sum of Basic, Demand, Energy, and Reactive Power Charges, plus applicable Metering and Delivery Adjustments. It specifies that adjustments must follow Schedules 91, 98, and 191. Additionally, it defines the Basic Charge structure based on Load Size, providing different rates for loads 3,000 kW or less versus those exceeding 3,000 kW, using a 12-month rolling average of the two greatest non-zero monthly demands.

Demand Charge:
Demand Charge: On-Peak Period Demand (Monday through Friday: 6:00 a.m. to 10:00 p.m.) $5.05 For each kW of Billing Demand

AI summary The document specifies the demand charge for the On-Peak Period, which occurs Monday through Friday from 6:00 a.m. to 10:00 p.m. The charge is set at $5.05 for each kW of Billing Demand.

Energy Charge:
Energy Charge: Base Rate 3.055¢ per kWh for all kWh Continued) Issued TF2 48T.1E April 18, 2005 Effective June 2, 2005 Issued by PACIFIC POWER & LIGHT COMPANY D. Douglas Iama D. Douglas Larson Title Vice President, Regulation Advice No. 05...

AI summary The document provides details regarding the 'Energy Charge: Base Rate' for Pacific Power & Light Company. It specifies a rate of 3.055¢ per kWh for all kilowatt-hours. The rate was issued on April 18, 2005, by D. Douglas Larson (Vice President, Regulation) and became effective on June 2, 2005. This represents the eighth revision of Sheet No. 48T.2, which cancels the seventh revision.

PACIFIC POWER & LIGHT COMPANY
PACIFIC POWER & LIGHT COMPANY FOR COMMISSION'S RECEIPT STAMP SCHEDULE 48T (Continued) LARGE GENERAL SERVICE - METERED TIME OF USE 1,000 KW AND OVER

AI summary The document is a continuation of Schedule 48T for Pacific Power & Light Company, specifically detailing the tariff structure for Large General Service - Metered Time of Use for customers with a demand of 1,000 kW and over.

MINIMUM CHARGE:
MINIMUM CHARGE: The monthly minimum charge shall be the basic and demand charge, unless a higher minimum is otherwise specified by contract.

AI summary The document specifies the calculation method for the monthly minimum charge, stating that it is composed of the basic and demand charges. It further notes that a higher minimum charge may apply if explicitly dictated by a contract.

REACTIVE POWER CHARGE:
REACTIVE POWER CHARGE: The maximum 15-minute reactive demand for the billing month in kilovolt-amperes in excess of 40% of the maximum measured kilowatt demand for the billing month will be billed at 45¢ per kvar of such excess reactive de...

AI summary The text defines the methodology for the Reactive Power Charge, which applies to customers whose reactive demand exceeds a specific threshold. Specifically, any maximum 15-minute reactive demand in kilovolt-amperes that is more than 40% of the maximum measured kilowatt demand for the billing month is subject to a charge of 45¢ per kvar of the excess amount.

PRIMARY VOLTAGE METERING AND DELIVERY ADJUSTMENTS:
PRIMARY VOLTAGE METERING AND DELIVERY ADJUSTMENTS: The above monthly charges are applicable without adjustment for voltage when delivery and metering are at Company's standard secondary voltage. Metering: For so long as metering voltage is...

AI summary The document outlines specific adjustments to monthly charges based on primary voltage levels for metering and delivery. Charges remain unadjusted at standard secondary voltage. For metering and delivery at primary distribution voltages of 11 kV or greater, a 1.0% reduction applies to metering charges, and a reduction of 30¢ per kW of load size applies to delivery charges. Additionally, a High Voltage Charge of $60 per month is imposed for deliveries metered at the delivery voltage.

PRIMARY VOLTAGE METERING AND DELIVERY ADJUSTMENTS: (Continued)
PRIMARY VOLTAGE METERING AND DELIVERY ADJUSTMENTS: (Continued) The reductions of charges herein shall not operate to reduce the minimum charge. When a new delivery or an increase in capacity for an existing delivery is, at request of Custo...

AI summary The text outlines specific adjustments to primary voltage metering and delivery charges. It specifies that charge reductions cannot lower the minimum charge. Additionally, it establishes a 30¢ per kW load size increase for new deliveries or capacity increases requested by customers when using Company-owned transformers at non-standard distribution voltages. The Company also maintains the right to change line voltages, providing affected customers the option to switch to the new voltage or utilize Company-supplied transformers subject to the specified adjustments.

ON-PEAK PERIOD BILLING DEMAND:
ON-PEAK PERIOD BILLING DEMAND: The On-Peak Billing Demand shall be the greater of: - (a) The measured On-Peak Period kW shown by or computed from the readings of Company's demand meter for the 15-minute period of greatest deliveries to Cus...

AI summary The text defines the methodology for determining the On-Peak Billing Demand for customers. It specifies that the demand is calculated as the greater of two values: the measured On-Peak Period kW recorded during the 15-minute period of highest delivery for the billing month (rounded to the nearest kW), or a fixed minimum of 500 kW.

Service under this schedule is subject to the General Rules and Regulations contained in the tariff of which this schedule is a part and to those prescribed by regulatory authorities.
Service under this schedule is subject to the General Rules and Regulations contained in the tariff of which this schedule is a part and to those prescribed by regulatory authorities. Issued by PACIFIC POWER & LIGHT COMPANY Ву Ro bert V. S...

AI summary The document is a formal notice or filing from Pacific Power & Light Company regarding a specific tariff schedule. It establishes that the services provided under this schedule are governed by the General Rules and Regulations of the overarching tariff, as well as any regulations prescribed by relevant regulatory authorities. The document identifies Robert V. Sirvaitis, Director of Pricing, as the responsible official for this filing.

FOR COMMISSION'S RECEIPT STAMP
FOR COMMISSION'S RECEIPT STAMP SCHEDULE 91 SURCHARGETO FUND LOW INCOME BILL ASSISTANCE PROGRAM All bills calculated in accordance with the schedules listed below shall have applied the following Surcharge. Schedule 15 $0.04 per month Sched...

AI summary The document outlines the specific monthly and annual surcharges applicable to bills calculated under various schedules for the Low Income Bill Assistance Program. It provides a list of 14 different schedules (ranging from Schedule 15 to Schedule 57) with corresponding surcharge amounts, such as $0.04 per month for Schedule 15 and $75.00 per month for Schedule 47T. It also notes that the surcharge for Schedule 40 is an annual amount to be applied to the November billing period.

SCHEDULE 98 ADJUSTMENT ASSOCIATED WITH THE PACIFIC NORTHWEST ELECTRIC POWER PLANNING AND CONSERVATION ACT
SCHEDULE 98 ADJUSTMENT ASSOCIATED WITH THE PACIFIC NORTHWEST ELECTRIC POWER PLANNING AND CONSERVATION ACT All bills to qualifying customers shall have deducted an amount equal to the product of all qualifying kilowatt-hours of use multipli...

AI summary The text specifies a credit or deduction for qualifying customers under Schedule 98, which is associated with the Pacific Northwest Electric Power Planning and Conservation Act. The deduction is calculated by multiplying the total qualifying kilowatt-hours of use by a rate of 0.884¢ per kWh.

PURPOSE:
PURPOSE: The System Benefits Charge is designed to recover costs incurred by the Company associated with providing demand side management services and programs to customers. \frac{\text{APPLICABLE}}{\text{All}}: \\ \frac{\text{bills}}{\tex...

AI summary The text outlines the purpose and application of the System Benefits Charge. This charge is intended to recover costs associated with the Company's demand side management (DSM) services and programs provided to customers. It applies to all bills calculated under the presently effective Tariff WN. No. U-74, specifically as a product of total kilowatt-hours of use multiplied by a designated cent-per-kilowatt-hour rate.

Schedule 15 0.109 cents
Schedule 15 0.109 cents Schedule 16 0.122 cents Schedule 17 0.122 cents Schedule 24 0.124 cents Schedule 36 0.102 cents Schedule 40 0.113 cents Schedule 48T 0.083 cents Schedule 51 0.109 cents Schedule 52 0.109 cents Schedule 53 0.109 cent...

AI summary The document presents a table of various schedules associated with specific cent values, likely representing rate components or adjustments. The information was issued by Pacific Power & Light Company on September 28, 2006, with an effective date of November 1, 2006. The filing is signed by Andrea L. Kelly, Vice President, Regulation.

Applicable
Applicable To non-residential Customers for all electric service required on the Customer's premises. Service under this Schedule is limited to electric service loads where standard transmission service voltage is 46 kV or greater and load...

AI summary The document outlines the applicability criteria for a specific electric service schedule for non-residential customers. It applies to loads exceeding 999 kW in more than one month of a consecutive 18-month period at standard transmission voltages of 46 kV or greater. The schedule ceases to apply if the load falls below 999 kW for 36 consecutive months or if the delivery voltage drops below 46 kV. It specifies that multiple points of delivery or different voltage classifications require separate metering and billing.

Monthly Billing
Monthly Billing The sum of the Basic, Demand, Energy and Reactive Power Charges. All Monthly Billings shall be adjusted in accordance with Schedule 94.

AI summary The document defines the composition of Monthly Billing, which consists of the sum of Basic, Demand, Energy, and Reactive Power Charges. It further specifies that all Monthly Billings are subject to adjustments as outlined in Schedule 94.

On-Peak Period Demand
On-Peak Period Demand (Monday through Friday: 7:00 a.m. to 11 :00 p.m.) $9.93 per kW for all kW of On-Peak Period Billing Demand

AI summary The document specifies the billing demand rate for the On-Peak Period, which is defined as Monday through Friday from 7:00 a.m. to 11:00 p.m. The rate is set at $9.93 per kW for all kilowatts of billing demand during these specific hours.

Minimum Charge
Minimum Charge The Basic Charge plus the Demand Charge for the current month. A higher minimum may be required under contract to cover special conditions.

AI summary The document defines the 'Minimum Charge' as the sum of the Basic Charge and the Demand Charge for the current month. It notes that specific contracts may mandate a higher minimum charge to account for special conditions.

Reactive Power Charge
Reactive Power Charge The maximum 15-minute reactive Demand for the month in kVar in excess of 40% of the measured kW Demand for the same month will be billed, in addition to the above charges, at 60¢ per kVar of such excess reactive Deman...

AI summary The document specifies the billing structure for the Reactive Power Charge. Customers are charged 60¢ per kVar for any reactive Demand exceeding 40% of their measured kW Demand for a given month, based on the maximum 15-minute reactive Demand recorded during that period.

Continuing Service
Continuing Service This Schedule is based on Continuing Service at each service location. Disconnect and reconnect transactions shall be subject to the provisions set forth in Rule 3, Section 6 of this tariff.

AI summary The text specifies that the pricing and conditions outlined in the schedule are based on the provision of continuing service at each service location. It explicitly states that any disconnect or reconnect transactions are governed by the provisions found in Rule 3, Section 6 of the tariff.

Rules
Rules Service under this Schedule is subject to the General Rules contained in the tariff of which this Schedule is a part, and to those prescribed by regulatory authorities. Issued by D. Douglas Larson, Vice President, Regulation Issued:...

AI summary This document section outlines the governing rules for services provided under a specific tariff schedule. It establishes that services are subject to the General Rules of the tariff and any additional rules prescribed by regulatory authorities. The text serves as a formal notice of these regulatory requirements, issued by the company's Vice President of Regulation.

Definitions and Basic Concepts:
Definitions and Basic Concepts: NPC Rate Effective Period shall be the 12 month period beginning April 1, 2007 and extending through March 31, 2008 in the first PCAM application filed on or before February 1, 2007. In each succeeding PCAM...

AI summary This document section defines the temporal and structural parameters for the Net Power Costs (NPC) Price Comparison and Amortization Mechanism (PCAM). It establishes the 'NPC Rate Effective Period' as a 12-month window and the 'NPC Comparison Period' as the preceding 12-month historic period. Additionally, it defines the 'Base NPC' as the sum of monthly total Company NPC approved by the Commission, noting that it must reflect an Embedded Cost Differential (ECD) adjustment and be recovered through unbundled rate elements.

Definitions and Basic Concepts (continued):
Definitions and Basic Concepts (continued): Adjusted Actual NPC: Adjusted Actual NPC is the annual sum of the monthly total Company amounts properly recorded in FERC Account Numbers: 501 (Steam Power Generation - Fuel), 503 (Steam Power Ge...

AI summary The text defines key components of the Price Comparison and Amortization Mechanism (PCAM), specifically the Adjusted Actual Net Power Costs (NPC) and the Deferred NPC Adjustment. Adjusted Actual NPC includes costs for coal, steam, natural gas, purchased power, and wheeling, excluding unpredictable events like hydro normalization or forced outages. The Deferred NPC Adjustment is a retail tariff charge calculated based on monthly differences between Adjusted Actual NPC and Base NPC, incorporating factors such as the Dead Band, Sharing Proportions, and Symmetrical Interest.

Timing
Timing The Company shall file Deferred NPC Adjustment applications on or before February 1st of each year under normal circumstances. The implementation and effective date of the Deferred NPC Adjustment shall be April 1st of each year unde...

AI summary The document outlines the annual filing and implementation timeline for the Deferred Net Power Costs (NPC) Adjustment. Under normal circumstances, the Company is required to file these applications by February 1st each year, with an effective date of April 1st. However, the Company retains the right to file out-of-period Price Comparison and Amortization Mechanism (PCAM) applications to account for extraordinary circumstances.

Deferred NPC Adjustment:
Deferred NPC Adjustment: Deferred NPC for the Comparison Period shall be calculated monthly and recorded on the Company's books, based on the following formula: Deferred NPC adjustment= ((((Adjusted Actual NPC- (Base NPC x Revenue Variatio...

AI summary The text outlines the calculation methodology for the Deferred Net Power Costs (NPC) Adjustment. It provides a specific formula involving Adjusted Actual NPC, Base NPC, Revenue Variation adjustments, and Dead bands, weighted by Sharing Proportions and Wyoming Allocated Shares, plus Symmetrical Interest. It also details the inclusion of an Embedded Cost Differential (ECD) Adjustment. Furthermore, it establishes the initial annual Base NPC at $660 million, with specific conditions and revisions for the 2006 comparison period based on the filing of a general rate case.

.... e •snzt'¥tM e'ffl& Deferred NPC Adjustment: (continued)
.... e •snzt'¥tM e'ffl& Deferred NPC Adjustment: (continued) schedules and, where applicable, to the demand and energy rate components within each schedule based on the applicable allocation factors and cost of service study relationships...

AI summary The text describes the methodology for allocating and calculating the Deferred NPC (Net Power Costs) Adjustment. The Company proposes to distribute allocated and classified costs across demand and energy rate components based on allocation factors and cost of service study relationships established in the previous General Rate Case (GRC). These costs are then divided by billing determinants to determine specific rates, ensuring the Deferred NPC adjustment is spread across customer classes and rate elements in the same proportion as the Base NPC.

Monthly Billing
Monthly Billing All charges and provisions of the applicable rate schedule will be applied in determining a Customer's bill except that the Customer's total electric bill will be increased or decreased by an amount equal to the product of...

AI summary The document outlines the methodology for calculating a customer's monthly electric bill. It specifies that all charges and provisions of the applicable rate schedule are applied, with specific adjustments made based on the product of kilowatt demand and a set dollar per kilowatt rate, as well as kilowatt-hours of use multiplied by a cents per kilowatt-hour rate.

Schedule Delivery Voltage Billing Units Base NPC Deferred NPC Adj.
Schedule Delivery Voltage Billing Units Base NPC Deferred NPC Adj. 2 \ \ Demand per kWh Energy per kWh 0.148¢ 1.180¢ 0.000¢ 0.000¢ 15 \ \ Demand per kWh Energy per kWh 0.017¢ 1.186¢ 0.000¢ 0.000¢ 25 Secondary Demand in excess of 15 kW per...

AI summary The document provides a technical table detailing the Net Power Costs (NPC) for various delivery schedules (Schedules 2, 15, 25, and 33). It specifies delivery voltages, billing units (Demand and Energy per kWh), and distinguishes between Base NPC and Deferred NPC Adjustments. The data includes specific pricing for primary and secondary voltages and identifies demand thresholds for specific schedules.

NPC PCAM Tariff Schedule 94
NPC PCAM Tariff Schedule 94 Monthly Billing (continued) Schedule Delivery Voltage Billing Units Base NPC Deferred NPC Adj. 33 Transmission Supp. Demand per kW Energy per kWh $0.77 1.135¢ $.000 0.000¢ 40 \ \ Demand per kW Energy per kWh $0....

AI summary The document presents a portion of Schedule 94 of the NPC PCAM Tariff, specifically detailing monthly billing rates for various delivery voltages and schedules. It lists base Net Power Costs (NPC) and Deferred NPC Adjustments for transmission, secondary, and primary delivery systems, categorized by billing units such as demand per kW and energy per kWh.

NPC PCAM Tariff Schedule 94
NPC PCAM Tariff Schedule 94 Monthly Billing (continued) Schedule Delivery Voltage Billing Units Base NPC Deferred NPC Adj. 207 \ \ Demand per kWh Energy per kWh 0.013¢ 1.186¢ 0.000¢ 0.000¢ 210 \ \ Demand per kW Energy per kWh $0.73 1.209¢...

AI summary The document presents a table detailing the NPC PCAM Tariff under Schedule 94. It specifies various delivery schedules (207, 210, 211, 212-1, 212-2, and 212-3) across different delivery voltages. Each schedule lists billing units (Demand per kWh or kW and Energy per kWh), corresponding Base NPC rates, and Deferred NPC Adjustments. The rates are applicable across all delivery voltage levels.

AVAILABILITY
AVAILABILITY This rate is available to any customer dassified In the major industrial group of manufacturing with 20-39 as the first two digits of the Standard Industrial Classification using the Company's standard service for power and li...

AI summary The text defines the eligibility criteria for a specific electricity rate. It is applicable to customers in the manufacturing industrial group (SIC codes 20-39) that utilize the Company's standard power and light service. To qualify, customers must have a contract demand of 1,000 kW or greater. The text explicitly states that this rate is not available for resale services.

Demand Charge:
Demand Charge: First 1 ,000 f<W of Billing Demand $ 12,710.00 Excess over 1,000 ~of Billing Demand @ $ 11.51 per f<W. The billing demand (to the nearest whole KW) shall be the greatest of: (1) the maximum integrated fifteen minute demand m...

AI summary The text outlines the specific structure and methodology for calculating Demand Charges. It establishes a tiered pricing model where the first 1,000 kW of billing demand is charged at a flat rate of $12,710.00, with excess demand charged at $11.51 per kW. The billing demand is determined by the highest value among five criteria, including maximum 15-minute demand, seasonal historical demand percentages, contract demand, and a 1,000 kW floor. Additionally, it mandates a power factor of at least 85%, with adjustments applied if the customer fails to maintain this standard.

Plus Energy Charge:
Plus Energy Charge: All Kwhrs.@ $ 0.03349 per Kwhr.

AI summary The document specifies the Plus Energy Charge rate, which is set at $0.03349 per kilowatt-hour (Kwhr). This represents a component of the rate structure for energy consumption.

DISCOUNT
DISCOUNT A discount of $0.60 per KW of billing demand will be allowed when the service Is supplied at a delivery voltage of 46,000 volls or higher.

AI summary The document specifies a specific rate discount for high-voltage electricity service. A discount of $0.60 per kilowatt (KW) of billing demand is permitted when the service is delivered at a voltage of 46,000 volts or higher.

MINIMUM CHARGE
MINIMUM CHARGE The monthly minimum charge is the demand as determined above. The Company may allow a buildup period not to exceed six months for new and expanding accounts during which time the contract demand and/or the minimum demand spe...

AI summary The document defines the monthly minimum charge as being based on the demand level. It specifies that the Company is permitted to offer new and expanding accounts a buildup period of up to six months, during which contract demand or minimum demand requirements in the rate schedule may be waived. Any buildup period exceeding six months requires prior specific approval from the Commission.

SPECIAL PROVISIONS
SPECIAL PROVISIONS The Company will furnish service in accordance with Its standard specifications. Non-standard service will be furnished only when the customer pays the difference in costs between non-standard service and standard servic...

AI summary The Company specifies that it will provide services according to its standard specifications. Any non-standard service requests will be fulfilled only upon the customer's agreement to pay the cost difference between the non-standard and standard service, or the Company's normal monthly facility charge based on that cost difference.

GENERAL TERMS AND CONDITIONS
GENERAL TERMS AND CONDITIONS The Company's General Terms and Conditions are incorporated by reference and a part of this rate schedule. RIDER TO RATES 23 AND 24 INTERRUPTIBLE SERVICE (Page 1 of 2)

AI summary This section serves as a formal incorporation of the Company's General Terms and Conditions into the specific rate schedule. It also introduces a specific rider pertaining to interruptible service for Rates 23 and 24.

AVAILABILITY
AVAILABILITY This schedule is available to any customer receiving concurrent service from the Company on Rate Schedules 23 or 24. The rider is limited to those customers that can centrad for 1,000 KW of interruptive demand or greater durin...

AI summary This section outlines the availability and eligibility criteria for a specific interruptible service rider. It applies to customers on Rate Schedules 23 or 24 who can provide at least 1,000 KW of interruptive demand between June and September. The rider is subject to a total aggregate limit of 150,000 KW across all customers and is explicitly prohibited for resale service.

MONTHLY RATE
MONTHLY RATE The rate per month shall be that stated on the Industrial Power Service Rate 23 or Large General Service Time-Of-Use Rate 24 schedules for the billing demand and the kilowatt-hours during the current billing month. The interru...

AI summary The text specifies how the monthly rate is calculated for industrial and large general service customers. It establishes that the rate is based on the schedules provided in Industrial Power Service Rate 23 or Large General Service Time-Of-Use Rate 24, covering both billing demand and kilowatt-hours. Additionally, it notes that interruptible demand is subject to a reduction based on a Demand Credit per kilowatt, depending on the customer's selected option.

AVAILABILITY
AVAILABILITY This rate schedule is available to all customers on an annual basis for service for lighting, heating and power or combination of lighting, heating and power where facilities of adequate capacity and suitable phase and voltage...

AI summary The document specifies the availability and requirements for a particular rate schedule. It is available to all customers annually for lighting, heating, and power services, provided the utility has adequate capacity, phase, and voltage. The service must be delivered at a single point of delivery with a single meter and is restricted to customers with billing demands of 10,000 kilowatts or greater.

NET MONTHLY RATE
NET MONTHLY RATE FUNCTION Generation Transmission Distribution Customer Service Total Primary Service: May through September Billing Cycles First 10,000 kW or less in the month $36,284.92 $5,625.09 $9,502.55 $3,287.44 $54,700 All additiona...

AI summary The document presents a table outlining the net monthly rate structure for primary service, categorized by billing cycles (May through September and October through April). The rates are broken down by functional components, including Generation, Transmission, Distribution, and Customer Service. It specifies costs for the first 10,000 kW or less in a month, the per-kW charge for additional capacity, and the kilowatt-hour (kWh) charges for both periods.

PAYMENT FOR SERVICE
PAYMENT FOR SERVICE Payment for Service Rider- See Rate Schedule 44. CT

AI summary The provided text fragment introduces the 'Payment for Service' section of the regulatory proceeding, specifically referencing the 'Payment for Service Rider' as detailed in Rate Schedule 44. It also includes a placeholder or header for 'CT' (Cost of Transmission).

TERMS AND CONDITIONS
TERMS AND CONDITIONS Service will be furnished under Company's Standard Terms and Conditions. R-7 _03-05-04.doc Original Sheet No: R-36.1 Sheet 1 of 5 Replacing: Sheet No: Name of Company: SOUTHWESTERN ELECTRIC POWER COMPANY Kind of Servic...

AI summary This document fragment identifies the 'Experimental Curtailable Service Rider' as a specific rate schedule (No. 36) for Southwestern Electric Power Company. It specifies that services are furnished under the Company's Standard Terms and Conditions and serves as a formal filing for an experimental electric service class.

AVAILABILITY
AVAILABILITY This Rider is available only in conjunction with Company's Lighting and Power (LP) or Large Lighting and Power (LLP) rate schedules to Customers who contract for not less than 1000 kW of curtailable power. The applicable rate...

AI summary This section outlines the eligibility and limitations for a specific Rider related to curtailable power. It is available only to customers contracting at least 1000 kW of curtailable power under Lighting and Power or Large Lighting and Power rate schedules. Key constraints include a single point of delivery, exclusion of backup power for customer-owned generation, and a capacity limit of 5% of the Company's projected aggregate peak demand. Customers must also ensure that curtailment does not cause damage or impact public safety.

DEFINITION OF TERMS
DEFINITION OF TERMS Total kW : Total kW is defined as the sum of the Firm kW and the Curtailable kW designated by the customer when contracting for service under this Rider and will be used to determine the applicable rate schedule. Firm k...

AI summary This document section provides formal definitions for terms used under the Experimental Curtailable Service Rider (Rate Schedule No. 36) for Southwestern Electric Power Company. It defines 'Total kW' as the sum of Firm and Curtailable kW, and distinguishes between 'Firm kW' (not subject to curtailment) and 'Curtailable kW' (subject to curtailment). It specifies that customers must designate these amounts when contracting and may adjust them annually via written request.

CONDITIONS OF SERVICE
CONDITIONS OF SERVICE Customer may choose to have Total kW or some portion thereof designated as Curtailable kW. The amount of Total kW not designated as Firm kW shall constitute Customer's Curtailable kW. Customer's service must be equipp...

AI summary The text outlines the conditions of service for the Experimental Curtailable Service Rider, which allows customers to designate a portion of their Total kW as 'Curtailable kW.' Customers are responsible for installing the necessary equipment and metering to reduce load during curtailment events. The Company may request curtailment to maintain service integrity, avoid system peaks, or manage load. The Company provides notice requirements for both non-emergency (30 minutes) and emergency (10 minutes) curtailments via telephonic communication.

MONTHLY CHARGES AND CREDITS
MONTHLY CHARGES AND CREDITS Customer's net monthly bill for service provided under this Rider will be calculated in accordance with Company's applicable rate schedule, with the exception that a Curtailable Power Credit will be applied. The...

AI summary This section outlines the calculation method for a customer's net monthly bill under a specific Rider. It specifies that the bill follows the Company's standard rate schedule but incorporates a Curtailable Power Credit. This credit is calculated by applying a Demand Credit to the average kilowatt load during the month's peak 15-minute period that exceeds the Firm kW, subject to a maximum cap based on the Curtailable kW.

The Demand Credit used to calculate the Monthly Curtailable Power Credit will be:
The Demand Credit used to calculate the Monthly Curtailable Power Credit will be: VOLTAGE LEVEL DEMAND CREDIT Secondary Service $3.19/kW Primary Service $3.06/kW Transmission Service $2.91/kW NON-COMPLIANCE PROVISIONS

AI summary The text specifies the Demand Credit rates used to calculate the Monthly Curtailable Power Credit across three different voltage levels. The credits are set at $3.19/kW for Secondary Service, $3.06/kW for Primary Service, and $2.91/kW for Transmission Service. The document also indicates that non-compliance provisions apply to these credits.

LIMITATIONS ON CURTAILMENTS
LIMITATIONS ON CURTAILMENTS Curtailments under this Rider are limited as follows: Daily Limit: No longer than 12 hours in any day, measured from midnight to midnight, except during system emergencies as described below. Annual Limit: No mo...

AI summary The document outlines the limitations and measurement rules for the Experimental Curtailable Service Rider for Southwestern Electric Power Company. It establishes a daily curtailment limit of 12 hours and an annual limit of 400 hours, excluding interruptions caused by equipment failures. During system emergencies involving public pleas for energy conservation, these daily limits are suspended, though these events still count toward the annual limit. It also specifies that any curtailment under 15 minutes is counted as a full 15-minute period.

APPLICATION
APPLICATION This Net Merger Savings Rider provides for a monthly credit applied as a percentage of base rate revenue beginning with the first revenue month after the effective date of the Docket No. 98-172-U merger between American Electri...

AI summary The document describes a Net Merger Savings Rider, which establishes a monthly credit for customers. This credit is calculated as a percentage of base rate revenue. The rider is scheduled to commence in the first revenue month following the effective date of the Docket No. 98-172-U merger between American Electric Power Company, Inc. and Central and South West Corporation. It will remain in effect until the first base rate change occurs after Year 5.

DETERMINATION OF BASE RATE REVENUE
DETERMINATION OF BASE RATE REVENUE Base rate revenues include all retail base rate revenues with the exception of revenues associated with fuel, miscellaneous services, fees and facility rentals. R-40_03-05-04.doc

AI summary The document provides a formal definition of base rate revenues for the purpose of the proceeding. It specifies that base rate revenues encompass all retail base rate revenues, excluding specific components such as fuel costs, miscellaneous services, fees, and facility rentals.

ARKANSAS PUBLIC SERVICE COMMISSION Tariff for Internal use Only
ARKANSAS PUBLIC SERVICE COMMISSION Tariff for Internal use Only Original Sheet No: 148.9a Sheet 2 of 3 Sheets Replacing: Sheet No: 148.9a Name of Company: SOUTHWESTERN ELECTRJC POWER COMPANY Kind of Service: Electric Class of Service: Part...

AI summary This document is a tariff sheet for the Southwestern Electric Power Company (SWEPCO) filed with the Arkansas Public Service Commission. It identifies Rate Schedule No. 40, titled 'TET Merger Savings Rider.' The document serves as a formal record for internal use and specifies the company name and service type, though it does not contain detailed narrative arguments or specific financial figures in this excerpt.

En e cf IVe: J my I 2006 th roug1 hJ nne 2007 revenue mon th
En e cf IVe: J my I 2006 th roug1 hJ nne 2007 revenue mon th Descri12tion Rate Code Year Six Over/Under Adjusted Year 7 Factor %for year 6 Net Merger Savine:s Credit Residential Basic 015,038 2.0323% -0.4288% 1.6035% Residential Heating 02...

AI summary The document provides a detailed breakdown of rate adjustments and merger savings credits for various customer classes for the 2006 through 2007 revenue months. It lists specific rate codes, Year Six factors, over/under percentages, and adjusted Year 7 figures. Key categories include residential heating, general services, lighting and power (primary and secondary), municipal services, and industrial applications like pulp and paper mills. It also specifies that Net Merger Savings Credits are excluded for certain standby and emergency power services.

CommerciaUSmall Industrial Class
CommerciaUSmall Industrial Class General Service Lighting & Power - Secondary Lighting & Power- Primary C-1 Heating Rider Lighting & Power TOU - Primary Lighting & Power TOU - Secondary

AI summary This section of the document lists the specific rate classes and riders applicable to the Commercial Small Industrial Class. It includes various configurations for Lighting & Power services, distinguishing between Primary and Secondary services, as well as Time of Use (TOU) options. It also identifies the C-1 Heating Rider as a component of the rate structure for this class.

Municipal Class
Municipal Class Municipal Pumping Municipal Service

AI summary The provided text identifies the 'Municipal Class' category within the regulatory proceeding, specifically highlighting 'Municipal Pumping' and 'Municipal Service' as relevant sub-classes or service types. No specific arguments, data, or analysis are provided in this section.

Lighting Class
Lighting Class Municipal Street & Parkway Lighting Public Street & Highway Lighting Private Lighting Area Lighting R-43 _ 03-05-04.doc THIS SPACE FOR PSC USE ONLY CT Original Sheet No: R-43 .3 Sheet3 of3 Replacing: Sheet No: Name of Compan...

AI summary The document fragment identifies the 'Lighting Class' of service, which includes categories such as Municipal Street & Parkway Lighting, Public Street & Highway Lighting, Private Lighting, and Area Lighting. It specifically references Rate Schedule No. 43, titled 'Transition Cost Rider (RIDER TC)', and identifies Southwestern Electric Power Company as the entity associated with this rate schedule.

PAYMENTFORSER~CE
PAYMENTFORSER~CE AT CT Payment for Service Rider- See Rate Schedule 44. AT R-43_03-05-04.doc THIS SPACE FOR PSC USE ONLY

AI summary The document snippet identifies a specific rate component titled 'Payment for Service Rider,' which is associated with Rate Schedule 44. It serves as a reference point within the regulatory proceeding, though the provided text contains no detailed analysis or arguments beyond the naming of the rider and its corresponding schedule.

N-40RIRs Attachment SEB-NSPI - 2h 43 passages
ALABAMA POWER COMPANY
ALABAMA POWER COMPANY http://www.soulherncomoany.com Voltage: Transmission Power Factor: 90% Assumes Substation Ownership ASSUMPTIONS Firm Monthly kW 0 Load Factor 100% Monthly kWh 0 lnterru!!tible Monthly kW 50.000 Load Factor 90% Rate: H...

AI summary The document provides technical specifications for Alabama Power Company, specifically regarding transmission voltage and power factor. It outlines assumptions for firm monthly kilowatt (kW) and kilowatt-hour (kWh) loads, including interruptible monthly kW. It also references specific rate structures, notably the HLF rate effective since 2006 with changes effective since 2006.

Jan Apr Jul Oct Average
Jan Apr Jul Oct Average Max Int. I Min Firm Description Customer Charge $2,000.00 $2,000 2 Demand Charge: $10.00 50,000 500,000 3 Energy Charge: $0.008595 32,850,000 282,346 4 ECR (Avg of Jan,Apr,Jui,Oct '06) $0.022255 32,850,000 731,077 5...

AI summary The document presents a detailed table of electricity rate components for a specific period, including Customer Charges, Demand Charges, and Energy Charges. It calculates the Electricity Cost Recovery (ECR) based on a four-month average. The table also details various rate riders, interruptible credits, and a multi-tiered state tax calculation totaling a final cost of $1,405,302 at 42.78 mills per kWh.

https://www2.ameren.com/business/Rates/ratesBundledElecFullSrvMO.aspx
https://www2.ameren.com/business/Rates/ratesBundledElecFullSrvMO.aspx Voltage: Transmission ASSUMP TIONS Power Factor: 90% Firm Assumes Substation Ownership Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Interruptible Monthly kW...

AI summary The document provides a detailed rate schedule for Large Primary Service (Transmission Voltage) for Appalachian Power Company in Virginia. It outlines the costs associated with a 50 MW firm load, including customer charges, seasonal demand charges for summer and winter, and energy charges. The calculation also accounts for a Rider B Substation Discount, resulting in a total monthly cost of $1,096,739 and a rate of 33.39 mills per kWh.

www.appalachianpower.com/CustomerService/RatesAndTariffs/LegalTariffFilings/Virginia.aspx
www.appalachianpower.com/CustomerService/RatesAndTariffs/LegalTariffFilings/Virginia.aspx Voltage: Transmission ASSUMPTIONS Power Factor: 90% Firm Assumes Substation Ownership Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Interr...

AI summary The document provides technical assumptions for a transmission-level voltage tariff filing for Appalachian Power in Virginia. It outlines specific parameters for 'Firm' and 'Interruptible' service types, including power factor, substation ownership, and monthly load metrics (kW and kWh) based on a 50,000 kW monthly capacity and a 90% load factor.

Rate: LPS-TOD (eff. 10/2/06) Pursuant to Interim Order
Rate: LPS-TOD (eff. 10/2/06) Pursuant to Interim Order WIGHTHY KVV U j Load Factor 0% Monthly kWh 0 Total A CONTRACTOR AND AND AND AND AND AND AND AND AND AND Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 50 MV √ Firm n Line Des...

AI summary The document presents a rate structure for LPS-TOD, effective October 2, 2006, pursuant to an interim order. It details a specific billing schedule for a customer with a monthly load of 50,000 kW and 32,850,000 kWh. The rate components include a fixed customer charge, demand charges, off-peak excess demand charges, energy charges, a fuel factor, and a customer-owned meter credit, culminating in a total monthly cost of $1,163,498 and a mill rate of 35.42.

Voltage: Transmission Power Factor. 90% Assumes Substation Ownership
Voltage: Transmission Power Factor. 90% Assumes Substation Ownership ASSUMPTIONS Firm MonthlykW 50,000 Load Factor SO% Monthly kWh 32,850,000 lnterru[!tible MonthlykW 0 Load Factor 0% Monthly kWh 0 Total MonthlykW 50,000 Load Factor 90% Mo...

AI summary The document outlines the technical assumptions and associated costs for a 50 MW firm load with a 90% load factor, assuming substation ownership. It provides a detailed breakdown of the 'I.P. (eff. 7/28//2006)' rate structure, including customer charges, demand charges, and energy charges. The calculation results in a total monthly cost of $968,686, equating to 29.49 mills per kWh. It also notes that interruptible power is available under contract service.

Voltage: Transmission Power Factor: 90% Assumes Substation Ownership
Voltage: Transmission Power Factor: 90% Assumes Substation Ownership ASSUME TIONS Firm Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Interruptible Monthly kW 0 Load Factor 0% Monthly kWh 0 Total Monthly kW 50,000 Load Factor 90%...

AI summary The document provides technical specifications for a Large Power Service rate, assuming substation ownership. It outlines the load profile for a firm service, specifying a monthly capacity of 50,000 kW, a load factor of 90%, and a resulting monthly energy consumption of 32,850,000 kWh. It also notes that interruptible service would result in zero capacity and energy values.

Metering Loss Adjustment Reduces units by 3%
Metering Loss Adjustment Reduces units by 3% 200 50 MW F irm Line Description Rates Units Cost (1) (2) (3) Facilities Charge: 1 First 500 kW (per bill) $678.40 1 $678 2 Add'l kW (per kW) $1.06 48,000 50,880 Demand Charge: 2 Summer (June -...

AI summary The document presents a detailed breakdown of the 200 MW Firm power supply costs for Avista Corporation. It outlines the specific rate components including Facilities Charges (based on kW), Demand Charges (split by summer and winter peak usage), and Energy Charges (split by peak and off-peak periods for both summer and winter). The total cost is calculated at $1,138,340, resulting in a rate of approximately 34.05 mills per kWh.

Section 19
www.dukepower.com/forbusiness/ciilbilllrates.asp Rate OPT Effective: Aug 1, 2006 Rate IS Effective: Apr 5, 2006 Voltage: Transmission Power Factor. 90%

AI summary The document provides a web link to Duke Energy's commercial and industrial billing rates and contains technical specifications for two specific rate types: Rate OPT (effective August 1, 2006) and Rate IS (effective April 5, 2006). It specifies a transmission voltage and a power factor of 90% for these rates.

Assumes Substation Ownership
Assumes Substation Ownership ASSUMPTIONS Firm MonthlykW 0 I Load Factor 100% Monthly kWh 0 lnterru~tible MonthlykW 50,000 Load Factor 90% Monthly kWh 32,850,000 Total MonthlykW 50,000 Load Factor 90% Monthly kWh 32,850,000 , Max Int. I Min...

AI summary The document outlines a rate structure for Duke Power Company in North Carolina, specifically for customers assuming substation ownership. It provides a detailed breakdown of costs for both Firm and Interruptible Power Services. The Firm Rate includes facilities charges, seasonal demand charges (Summer and Winter), and energy charges for On-Peak and Off-Peak usage, along with a fuel-in-rates adjustment. The Interruptible Power Service (Rider IS) features a lower facilities charge and a significant demand credit. Total costs are calculated including a 4.50% state sales tax.

Rate OPT Effective: October 1, 2006 Rate IS Effective: April 28, 2006 Voltage: Transmission Power Factor: 90% Assumes Substation Ownership
Rate OPT Effective: October 1, 2006 Rate IS Effective: April 28, 2006 Voltage: Transmission Power Factor: 90% Assumes Substation Ownership ASSUMPTIONS Firm MonthlykW 0 Load Factor 100%' MonthiykWh 0 llnterruQtible MonthiykW 50,000 Load Fac...

AI summary This document outlines the cost components and rate structures for two types of transmission power service: Optional Power Service (Rate OPT) and Interruptible Power Service (Rate IS). It provides a detailed breakdown of facilities charges, demand charges (tiered by season and capacity), and energy charges (tiered by peak/off-peak usage) for a 50,000 kW load. The data includes specific cost calculations for both firm and interruptible service types, including a fuel adjustment for Rate OPT.

Adjustment for fuel in rates
Adjustment for fuel in rates Fuel in Rates ¢/kWh Jan 2006 1.4070 Apr2006 1.4070 Jul 2006 1.4070 Oct 2006 1.776o I Average 1.4993 Difference (0.2768) $/kWh (0.002768) EL PASO ELECTRIC COMPANY· TEXAS ASSUMPTIONS Rate 29, Transmission Voltage...

AI summary The document provides a detailed breakdown of fuel cost adjustments and rate structures for El Paso Electric Company in Texas. It presents comparative fuel rates for 2006, showing a variance between different quarters. Specifically, it outlines the cost components for 'Transmission Voltage Service' (Firm and Interruptible), including demand charges, energy charges, and fixed fuel factors based on specific load factors, monthly kilowatts, and kilowatt-hours.

Section 25
http://www.empiredistrict.com/ProductsServices/Industrial/Rates/ar.htm ASSUMPTIONS Rate PT Effective: 5/14/05 Firm Rider IR Effective: 8/24/98 Monthly kW 0 Load Factor 100% Monthly kWh Interruptible Monthly kW 50,000 Load Factor 90% Monthl...

AI summary The document outlines the rate assumptions for a specific industrial service provided by Empire District. It specifies various service types including Firm Rider IR, Monthly kW 0, and Interruptible service. Key technical parameters provided include load factors ranging from 90% to 100%, specific monthly kilowatt-hour (kWh) capacities reaching up to 32,850,000, and transmission voltage requirements. The data also notes assumptions regarding substation ownership and power factor requirements.

Max Int. / Min Firm
Max Int. / Min Firm Line Description Rates Units Cost 1 Customer Charge - Firm $170.00 1 $ 170 2 Customer Charge - Interr $28.40 1 28 Demand Charge: 3 Summer (JJAS) $11.45 16,667 190,833 4 Winter 7.70 33,333 256,667 5 Total 50,000 $447,500...

AI summary The document provides a detailed cost breakdown for a 'Max Int. / Min Firm' rate structure. It outlines specific charges including Customer Charges for Firm and Interruptible services, Demand Charges for Summer and Winter periods (including Interruptible Credits), and Energy Charges based on hourly usage. The calculation concludes with a total cost of $1,730,815, incorporating an Electricity Cost Recovery (ECR) mechanism and reflecting a final rate of 52.69 mills per kWh.

Rider M1 reduces units by 2%
Rider M1 reduces units by 2% ASSUMPTIONS Firm Rider M1 Reduc Monthly kW 0 0 Load Factor 100% 100% Monthly kWh 0 0 Interruptible Monthly kW 50,000 49,000 Load Factor 90% 90% Monthly kWh 32,850,000 32,193,000 Total MonthlykW 50,000 49,000 Lo...

AI summary The document provides a detailed cost calculation for a customer under Rider M1, which includes a 2% unit reduction. It breaks down various charges and credits, including Firm Customer Charges, Interruptible Customer Charges, and seasonal On Peak and Excess kW charges for both Summer and Winter periods. The calculation accounts for specific M1 Credits, Demand Credits from a settlement agreement, and various riders such as the M27 Fuel Adjustment, M33 Grand Gulf, and M47 Transition Cost Rider, resulting in a total cost of $1,155,855 at 35.19 mills per kWh.

www.southerncompany.com/gapower/pricing/gpc rates .asp?mnuOpco+gpc&mnuType+com&mnultem-ps
www.southerncompany.com/gapower/pricing/gpc rates .asp?mnuOpco+gpc&mnuType+com&mnultem-ps Voltage: Transmission ASSUMPTIONS Power Factor: 90% Assumes Substation Ownership Firm Monthly kW 0 Load Factor 100% Monthly kWh 0 Interruptible Month...

AI summary The document provides a detailed breakdown of the GPC rates for transmission-level voltage service, specifically for a firm substation ownership scenario with a 50,000 kW capacity and 90% load factor. It outlines a complex tariff structure including base charges, demand charges, and tiered energy charges. Notably, it incorporates the DPEC-1 (Demand Plus Energy Credit) rider, which applies seasonal demand and energy credits, and includes a fuel cost recovery mechanism and state sales tax.

INDIANA MICHIGAN POWER· IN www.aep.com
INDIANA MICHIGAN POWER· IN www.aep.com Voltage; Transmission Power Factor. 90% Assumes Substation Ownership ASSUMPTIONS !Firm MonthlykW 0 Load Factor 100% Monthly kWh 0 lnterru[ltible Monthly kW 50.000 1 Load Factor 90% Monthly kWh 32,850,...

AI summary The document provides a detailed rate schedule for Indiana Michigan Power (AEP) regarding Industrial Power (I.P.) and Interruptible Power (I.R.P.) services effective July 30, 2001. It outlines specific assumptions for firm and interruptible loads, including monthly kW, load factors, and kWh. The tables detail service charges, demand charges per kVA, energy charges per kWh, savings credits, and fuel adjustments, providing a cost breakdown for both firm and interruptible service types.

Section 34
http://www.aepcustomer.com CIP-TOD Rate Effective: 3/30/06 CS-IRP Rate Effective: 6/1/98 Note: Rate IRP was discontinued effective 6/1/98 and replaced with CS-IRP Voltage: Transmission Power Factor: 90% Assumes Substation Ownership ASSUMPT...

AI summary The document provides technical specifications and rate effective dates for various electricity service rates, specifically the CIP-TOD and CS-IRP rates. It notes the discontinuation of the Rate IRP on June 1, 1998, and its replacement by CS-IRP. Additionally, it outlines technical assumptions for a load profile, including a transmission power factor of 90%, substation ownership, and a monthly load of 50,000 kW with a load factor of 3, totaling 32,850,000 kWh.

Note: Fuel Adj. Is combination of Fuel Adj. AND Systems Sales Factor
Note: Fuel Adj. Is combination of Fuel Adj. AND Systems Sales Factor 50 MW Firm Line Description Rates Units Cost Line Description (1) (2) (3) (., 1 —7 Firm Rate: CIP-TOD 1 Service Charge $1,353 1 $1,353 Demand Charge 2 On Peak kW $9.35 50...

AI summary The document provides a detailed rate calculation for the Kentucky Power Company, specifically for the CIP-TOD Firm Rate and the CC IDD Contract Service Interruptible Power (C3-IKF). The breakdown includes service charges, demand charges (on-peak and off-peak kW), energy charges, fuel adjustments, and capacity charges. It also accounts for an environmental surcharge, a Net Merger Savings Rider, and a 6.00% state tax, resulting in a total cost of $1,234,164 and a rate of 37.57 mills per kWh.

Section 37
hllp://www.lqeenergy.com/bsc/ku/rates tariffs.asp LCI • TOD: Effective 7/5/05 Curtailable Service Rider CSR 2: Effective 711/04 Voltage: Transmission Power Factor. 90% Assumes Substation Ownership Large CommerciaVIndustrial Time-of-Day

AI summary The text provides specific technical parameters and effective dates for various electricity service riders and rates, including the LCI • TOD, Curtailable Service Rider CSR 2, and Large Commercial/Industrial Time-of-Day rates. It specifies a 90% Transmission Power Factor and notes assumptions regarding substation ownership.

Transmission Level
Transmission Level ASSUMPTIONS Firm MonthlykW 50,000 Load Factor 90% Monthly kWh 32,850,000 Interruptible MonthlykW 0 Load Factor 0% Monthly kWh 0 Total MonthlykW 50,000 Load Factor 90% Month! kWh 32,850,000 Max Int. I Min Firm Line Descri...

AI summary The document outlines the cost structure for Transmission Level service, based on specific load assumptions including a monthly demand of 50,000 kW and a 90% load factor. It details various charges including customer, demand, and energy charges, alongside fuel adjustments, environmental surcharges, and surcredits (Merger and Value Delivery). It also specifies different curtailable demand credit options based on annual curtailment hour limits.

Section 41
www.appalachianpower.comiCustomerService/RatesAndTariffsi leqaiTaritfFilinosfTennessee.aspx Contact: Judi Willis [email protected] Greg Shamblin, 1-888-710-4237 Ext 4510 Tariff I.P. Industrial Power December 1997 Voltage: Transmission Power...

AI summary The document provides contact information and technical specifications for the Appalachian Power Industrial Power (I.P.) Tariff, dated December 1997. It lists contact persons Judi Willis and Greg Shamblin and specifies technical requirements for the service, including a transmission voltage and a 90% Power Factor. It also notes that the service assumes substation ownership.

Rate: I.P. - Transmission Level (eft 12/22/97)
Rate: I.P. - Transmission Level (eft 12/22/97) ASSUMPTIONS Firm Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Interruptible Monthly kW 0 Load Factor 0% Monthly kWh 0 Total Monthly kW 50,000 Load Factor 90% Mont hi kWh 32,850,000...

AI summary The document outlines the rate structure for Industrial Power (I.P.) at the Transmission Level, effective December 22, 1997. It provides a detailed cost breakdown for a 50 MW firm load with a 90% load factor. The rates include a fixed service charge, demand charges based on kW, and energy charges based on kWh. It also accounts for fuel adjustments, a Purchased Power Adjustment Rider, and a prompt payment discount, resulting in a final calculated cost of $1,114,408 with a mill rate of 33.92 mills per kWh.

LOUISVILLE GAS AND ELECTRIC COMPANY
LOUISVILLE GAS AND ELECTRIC COMPANY hrto:/lwww.lgeeneroy.com/bst"'.!lge!ra tes tarilfs.asp Rates Effective: 6/30/05 LP-TOD 7/1/04 Interruptible Voltage: Transmission Power Factor. 90%

AI summary The document provides a reference to the Louisville Gas and Electric Company's rate information, specifically noting effective dates for LP-TOD and Interruptible services. It also specifies technical requirements for transmission power factor at a 90% level.

East System
East System Rate 53 Large Industrial (eff 3/1/99) Rider No. 4 Interruptible Power Service (eff 5/27/97)

AI summary The document identifies specific rate structures and riders applicable to the East System. It highlights the 'Rate 53 Large Industrial' and the 'Rider No. 4 Interruptible Power Service' as relevant components of the tariff design for large industrial customers in that region.

Voltage: Transmission Power Factor: 90%
Voltage: Transmission Power Factor: 90% ASSUME TIONS Firm Monthly kW 0 Load Factor 100% Monthly kWh 0 Interruptible Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Total Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Max...

AI summary The document presents a detailed cost calculation for a Large Industrial Firm Rate based on a transmission power factor of 90%. It outlines specific demand charges for summer and winter periods, energy charges for peak and off-peak usage, and includes cost recovery mechanisms for AEP (Appalachian Power) and Energy Efficiency. The total firm cost is calculated at $1,301,468, which is subsequently reduced by a Rider No. 4 Interruptible Power credit to a total cost of $1,141,468, resulting in a final rate of 34.75 mills per kWh.

North System
North System ASSUMPTIONS MonthlykW 0 Load Factor 100% Monthly kWh 0 MonthlykW 50,000 90% Monthly kWh 32,850,000 Total 50,000 Load Factor 90% Monthly kWh 32,850,000 I Firm lnterrul:!tlble Load Factor MonthlykW Max Int. I Min Firm Line Descr...

AI summary The document presents a detailed cost calculation for the 'North System' under the Large General Service firm rate. It outlines assumptions for a 50,000 kW load with a 90% load factor, totaling 32,850,000 monthly kWh. The calculation breaks down monthly service charges, demand charges for summer and winter peaks, and off-peak demand charges. It also includes energy charges for on-peak and off-peak periods, along with specific cost recoveries for AEP and Energy Efficiency, resulting in a total firm cost of $975,291.

South System
South System Rate LXPILXO LGS-TOU Transmission (eft 3/1/99) ASSUMPTIONS Rider No. 57 Curtailment SeNice (eft 1/9/03) Firm I MonthlykW 0 Voltage: Transmission . Load Factor 100% Power Factor. 90% Monthly kWh 0 lnterru!Jtible MonthlykW 50,00...

AI summary The document outlines the rate structure and cost calculations for the South System, specifically focusing on the LGS-TOU Transmission rate and Rider No. 57 Curtailment Service. It provides a detailed breakdown of demand charges for summer and winter periods, energy charges for on-peak and off-peak usage, and specific cost recoveries for AEP and energy efficiency. The calculations are based on a firm monthly load of 50,000 kW and a total of 32,850,000 kWh.

Section 53
http://www.alleghenypower.comfTariffsfWVfWvmonlariffslwvmontariff.asp

AI summary The provided text is a URL pointing to the Allegheny Power website, specifically to a section regarding tariffs for West Virginia and Vermont. No substantive discussion of regulatory proceedings, arguments, or specific program details is contained in the text.

General Number 304-366-3000
General Number 304-366-3000 General Number 304-366-3000 Marie Hemminger (724) 838-6523 (Works in Rates Dept. ASSUMPTIONS Firm MonthlykW 50000 Rate P, Large Power Service Rate Load Factor 90% Effective April 21, 2006 Monthly kWh 32,850,000...

AI summary The document provides a detailed rate calculation and usage profile for a customer under the 'Rate P, Large Power Service Rate' effective April 21, 2006. It specifies a monthly load of 50,000 kW with a 90% load factor and a total monthly consumption of 32,850,000 kWh. The calculation includes various cost components resulting in a total cost of $1,132,042 and a rate of $34.46. Additionally, it notes that the Temporary Customer Choice Credit was discontinued in November 2005.

Rate: LGS· TOU eff. 10/1/06 Rider No. 58 D • Curtaflable Load eff. 10/1/03
Rate: LGS· TOU eff. 10/1/06 Rider No. 58 D • Curtaflable Load eff. 10/1/03 ASSUMPTIONS Firm MonthlykW Load Factor 100% Monthly kWh 0 Interruptible MonthlykW 50,000 Load Factor 90% Monthly kWh 32,850,000 Total Monthly kW 50,000 Load Factor...

AI summary This document outlines the rate structure for Large General Service Time-of-Day (LGS-TOU) with Rider No. 58 D and Curtailable Load for Progress Energy Carolinas, Inc. in North Carolina. It provides a detailed cost breakdown for a 50,000 kW load with a 90% load factor, including basic customer charges, tiered demand charges for summer and winter periods, energy charges for on-peak and off-peak usage, fuel adjustments, and voltage discounts. The final calculation includes a 4.5% sales tax.

Section 59
(formerly Carolina Power & Light Company- SC) www.progress-enerqy.com/aboulenerqylrateslsctariffs.asp Voltage: Transmission Power Factor. 90% Assumes Substation Ownership Rate: LGS-TOU eff. 711/06

AI summary The provided text is a brief technical reference or excerpt relating to electricity rates and specifications. It identifies a specific rate type (LGS-TOU) effective as of July 2006, specifies a voltage and transmission power factor, and notes an assumption regarding substation ownership.

Rider No. 58 E - Curtailable Load eff. 711/05
Rider No. 58 E - Curtailable Load eff. 711/05 ASSUMPTIONS Firm MonthlykW 0 Load Factor 100% Monthly kWh 0 Interruptible MonthlykW 50.000 Load Factor 90% Monthly kWh 32,850,000 Total MonthlykW 50,000 Load Factor 90% Monthl kWh 32.850,000 Ma...

AI summary The document outlines the rate structure for Rider No. 58 E - Curtailable Load, effective July 1, 2005, for Progress Energy Carolinas, Inc. in South Carolina. It provides a detailed breakdown of monthly costs for firm and interruptible services, including basic customer charges, tiered demand charges for summer and winter periods, energy charges for on-peak and off-peak usage, fuel adjustments, and voltage discounts. The calculation concludes with a total monthly cost of $1,551,566 based on a 50,000 kW load.

Rate 23, Industrial Power Service eff. 5/1/06 Interruptible Rider- 1/2005
Rate 23, Industrial Power Service eff. 5/1/06 Interruptible Rider- 1/2005 ASSUMPTIONS Firm MonlhlykW 0 Load Factor 100% Monthly kWh 0 Interruptible Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Total MonthlykW 50,000 Load Factor...

AI summary The document presents a rate calculation for the Industrial Power Service (Rate 23) effective May 1, 2006, specifically focusing on the Interruptible Rider. It outlines cost components for a 50,000 kW load with a 90% load factor, including demand charges, voltage discounts, energy charges, and fuel adjustments. Two interruptible credit options (Option A and Option C) are compared, showing that Option C provides a higher credit and a lower mill per kWh rate than Option A.

14 Mills per kWh
14 Mills per kWh ASSUMPTIONS Firm MonthlykW 0 Load Factor 100% Monthly kWh 0 Interruptible Monthly kW 50,000 Load Factor 90% Monthly kWh 32,850,000 Total MonthlykW 50,000 Load Factor 90% Monlhl kWh 32,850,000 Max Int. I Min Firm Line Descr...

AI summary The document provides a detailed cost calculation for a specific load profile (50,000 kW at a 90% load factor) under the 'Large Light & Power' Firm Rate. It breaks down the monthly costs into demand charges for summer and winter, energy charges, and various riders including a Curtailable Service Rider, Net Merger Savings Rider, and a Fuel Adjustment. The final calculated total cost is $1,387,211, resulting in a rate of 42.23 cents per kWh.

YlVtW swepr.o com!CpslomerService Rr~tcsAndTarlf1srLeaa!TariffFllingsrrexm;Current.aspx
YlVtW swepr.o com!CpslomerService Rr~tcsAndTarlf1srLeaa!TariffFllingsrrexm;Current.aspx ASSUMPTIONS Rates Effective: February 15, 1984 Firm Voltage: Transmission Monthly kW 0 Power Factor: 90% Load Factor 100% Assumes Substation Ownership...

AI summary The document provides a detailed tariff structure for firm and interruptible electricity rates, effective February 15, 1984. It outlines specific demand charges, energy charges, and various riders—including fuel adjustments, merger savings, and rate reductions—for transmission-level voltage. The data distinguishes between firm service (with 100% load factor assumptions) and interruptible service (with 90% load factor assumptions), calculating total monthly costs and mills per kWh based on specific power factors and consumption volumes.

SOUTHWESTERN PUBLIC SERVICE COMPANY· TX (Xcel Energy)
SOUTHWESTERN PUBLIC SERVICE COMPANY· TX (Xcel Energy) www.xcelenerqy.com Rates Effective: LGS-T 4/24/96 (3/5/97) Firm Experimental lnduslrial Interruptible Rate Rider ( Monthly kW Voltage: Transmission Power Factor: 90%

AI summary The document provides a brief reference to the Southwestern Public Service Company (Xcel Energy) and lists specific rate categories, including the LGS-T rate and the Experimental Industrial Interruptible Rate Rider. It specifies technical parameters such as voltage, transmission power factor (90%), and the monthly kW basis for the interruptible rate rider.

Rates Effective: 1 0/03 Voltage: Transmission Power Factor: 90% Assumes Substation Ownership
Rates Effective: 1 0/03 Voltage: Transmission Power Factor: 90% Assumes Substation Ownership ASSUMPTIONS Firm MonlhlykW 0 Load Factor 100% Monthly kW h 0 Interruptible MonthlykW 50,000 Load Factor 90% Monthly kWh 32,850,000 Total MonthlykW...

AI summary The document presents a detailed rate structure for the Virginia Electric and Power Company, effective October 3rd. It outlines specific charges for Firm and Interruptible Flat Price Interruptible (FPI) services, including customer charges, administration fees, demand charges, and energy charges. The table includes various adjustments such as environmental adjustments and a demand credit, culminating in a total firm cost of $1,183,603 and a rate of 36.03 mills per kWh for a specific load profile.

Section 83
htto://www.dom.com/customer/vabus bunclled.jsp Rate GS-4 Effective January 1, 2004 CS Rate· Effective September 30, 1997

AI summary The provided text appears to be a fragmented snippet containing a URL and brief references to historical electricity rates, specifically mentioning 'Rate GS-4' effective January 1, 2004, and a 'CS Rate' effective September 30, 1997.

Large Power - Rate L
Large Power - Rate L Description Units Rates Cost Demand Charge per kW 50,000 11.85 592,500 Energy: per kWh 32,850,000 0.027400 900,090 Total Cost ¢/kWh (Canadian) $ 1,492,590 4.54 Manitoba Hydro

AI summary The document presents a pricing table for 'Large Power - Rate L' services. It specifies the demand charge per kilowatt (kW) and the energy cost per kilowatt-hour (kWh), along with the total cost and the resulting cost per kilowatt-hour (Canadian). The table also lists Manitoba Hydro as a related entity or reference point.

Rate General Service Large
Rate General Service Large Description Units Rates Cost Demand Charge: perkVa 55,556 5.401 300,056 Energy: per kWh 32,850,000 0.021870 718,430 Total Cost ¢/kWh (Canadian) $ 1,018,485 3.10 NB Power

AI summary The document presents a rate table for the 'Rate General Service Large' provided by NB Power. It outlines specific pricing components, including a Demand Charge of 5.401 per perkVa and an Energy rate of 0.021870 per kWh. The total calculated cost is shown as $1,018,485 at a unit cost of 3.10 cents per kWh.

Large Industrial Service (eff 7/1/06) with Curtailable Power Credit
Large Industrial Service (eff 7/1/06) with Curtailable Power Credit Description Units Rates Cost Demand Charge: per ·kW 50,000 11.09 554,500 Energy: per kWh 32,850,000 0.040700 1,336,995 Curtailable Power Credit 50,000 (3.00) (150,000) Tot...

AI summary The document provides a cost and rate breakdown for the Large Industrial Service (effective July 1, 2006) which includes a Curtailable Power Credit. It details specific charges for demand (per kW) and energy (per kWh), alongside the credit amount, to calculate the total cost per kilowatt-hour. The data is presented in a tabular format showing units, rates, and total costs.

Power -Standard (Rate Code E24)
Power -Standard (Rate Code E24) Description Units Rates Cost Monthly Charge 1 5,466.00 5,466 Demand Charge: perkVa 55,556 4.128 229,333 Energy: per kWh 32,850,000 0.041710 1,370,174 Total Cost ¢/kWh (Canadian) $ 1,604,973 4.89

AI summary The document provides a detailed breakdown of the Power -Standard (Rate Code E24) tariff structure. It specifies the monthly charge, the demand charge per kilovolt-ampere (perkVa), and the energy charge per kilowatt-hour (per kWh). The table also includes the associated units, total costs, and the calculated total cost per kilowatt-hour in Canadian dollars.

N-40RIRs Attachment SEB-NSPI - 2a, pt. 2 (Large File - 15 MB) 58 passages
MONTHLY RATE
MONTHLY RATE Demand Charge $21.25 per kilowatt for all kilowatts of Demand {I)(T) (D) Energy Charge $0.00645 per kilowatt-hour for all kilowatt-hours (I)

AI summary The document specifies the monthly rate structure for electricity, detailing two primary components: a Demand Charge of $21.25 per kilowatt for all kilowatts of demand, and an Energy Charge of $0.00645 per kilowatt-hour for all kilowatt-hours consumed.

MONTHLY MINIMUM
MONTHLY MINIMUM Demand charge for the Minimum Contract Capacity or the applicable minimum demand charge, whichever is greater. In the event the customer has signed a contract for firm demand in conjunction with (N) interruptible power serv...

AI summary The text defines the calculation methodology for the monthly minimum demand charge. It specifies that the charge is based on the greater of the Minimum Contract Capacity or the applicable minimum demand charge. Additionally, it clarifies that for customers with contracts involving both firm and interruptible power service, the monthly demand billed shall be the amount explicitly specified in the power sales agreement.

DETERMINATION OF DEMAND
DETERMINATION OF DEMAND Maximum demand will be defined as the highest measured thirty (30) minute average kilowatt load determined by measurement. The measured demand will be adjusted for billing when the metering adjustment clause is appl...

AI summary The text defines the methodology for determining 'Maximum demand' for billing purposes. It establishes that demand is based on the highest 30-minute average kilowatt load, subject to adjustments from the metering adjustment clause. Furthermore, it sets a floor for billing demand, ensuring it is at least 75% of the highest on-peak demand from the previous May through October period (within a 12-month window) or the minimum contract capacity, whichever is greater, unless specific 1/2 on-peak - 1/2 off-peak provisions are invoked.

When the demand established during the off-peak period exceeds the demand
When the demand established during the off-peak period exceeds the demand Section Number_~1':: Revision Number 13 - SheetNumber ~1~7 Effective with energy consumed on or Page 1~o~f~3~ after SCHEDULE NO. 29 TRANSMISSION VOLTAGE SERVICE RATE

AI summary The document contains a heading and a table header related to the Transmission Voltage Service Rate (Schedule No. 29). It specifically addresses conditions where demand during the off-peak period exceeds the established demand. The text is a technical excerpt from a tariff schedule rather than a narrative argument.

FIXED RATE RIDER
FIXED RATE RIDER This rider is available to existing or new customers taking service under this schedule with a minimum contractual monthly demand of at least 8,000 KW. Upon the execution of a three (3) year service contract, EPEC will gua...

AI summary The Fixed Rate Rider provides a mechanism for customers with a minimum contractual monthly demand of at least 8,000 KW to secure guaranteed fixed rates for the non-fuel (T) component of their monthly rate. This requires a three-year service contract, guaranteeing fixed rates for at least two years, with a possible extension up to three years at EPEC's discretion. The rider is ineligible for customers under the Economic Development Rate Schedule No. 33 and is generally unavailable for customers with firm demand in conjunction with interruptible power service unless expressly permitted by EPEC.

FACILITIES CHARGE
FACILITIES CHARGE In the event the Company is required to install and operate additional transmission plant, switching stations or transformation to meet the customer's requirements, a Facilities Charge shall be included under this rate. T...

AI summary The text defines the 'Facilities Charge' rate, which applies when the Company is required to install and operate additional transmission infrastructure, switching stations, or transformation facilities to meet specific customer requirements. It explicitly states that the installed costs of metering are included in the determination of this charge.

If the power factor at the time of the highest measured thirty (30) minute interval kilowatt demand for the entire plant is below 90% lagging, a charge of $0.0700 per KVAR will be
If the power factor at the time of the highest measured thirty (30) minute interval kilowatt demand for the entire plant is below 90% lagging, a charge of $0.0700 per KVAR will be Section Number 1~­ : Revision Number_~1.::.3 SheetNumber_ 1...

AI summary The document excerpt specifies a penalty charge for transmission voltage service. If a plant's power factor falls below 90% lagging during its highest measured thirty-minute kilowatt demand interval, a charge of $0.0700 per KVAR will be applied. This is part of Schedule No. 29 of the Transmission Voltage Service Rate.

Preamble
made for each KVAR by which customer's computed KVAR demand exceeds 48.432% of the measured kilowatt, or adjusted kilowatt demand, whichever is applicable. If the power factor is greater than or equal to 90%, then no power factor adjustmen...

AI summary The text outlines the technical calculation for power factor adjustments. Specifically, it specifies that an adjustment is applied for each Kilovolt-ampere reactive (KVAR) by which a customer's computed KVAR demand exceeds 48.432% of their measured kilowatt or adjusted kilowatt demand. It also establishes a threshold where no adjustment is made if the customer's power factor is 90% or greater.

FIXED FUEL FACTOR
FIXED FUEL FACTOR The above rates are subject to the provisions of Company's Tariff Schedule No. 98 entitled Fixed Fuel Factor.

AI summary The text specifies that the rates mentioned in the preceding section are subject to the provisions set forth in the Company's Tariff Schedule No. 98, which is titled 'Fixed Fuel Factor'.

TERMS AND CONDITIONS
TERMS AND CONDITIONS The Company's Rules and Regulations apply to service under this schedule. The Term of Contract under this schedule shall be not less than ten (10) years. Should a customer be eligible and EPEC elects to provide service...

AI summary The text outlines the terms and conditions for a specific service schedule, establishing that the Company's Rules and Regulations apply. It specifies a minimum contract term of ten years and provides a hierarchy of authority: if a customer is eligible for service under Rate Schedule No. 27 in conjunction with this schedule, the provisions of Rate Schedule No. 27 and the customer's Contract for Power Service will take precedence in the event of any inconsistencies.

(T)
(T) Section Number_ 1 Revision Number 13 Sheet Number 17 Effective with energy consumed on or Page 3 of 3 after SCHEDULE NO. 27 INTERRUPTIBLE POWER SERVICE RATE

AI summary The provided text is a header for Schedule No. 27 of a regulatory document, which specifies the Interruptible Power Service (IPS) rate. It identifies the rate as a non-fuel component (T) and includes administrative tracking information such as section and revision numbers. No specific arguments or detailed rate calculations are provided in this specific snippet.

MONTHLY RATE
MONTHLY RATE The monthly charge for interruptible power service hereunder, excluding fuel, shall be comprised of the following rate elements: - (a) a demand charge calculated by multiplying (i) Customer's Interruptible Power Billing Demand...

AI summary The document outlines the monthly rate structure for interruptible power service, excluding fuel costs. The rate is composed of three elements: a demand charge based on Texas-jurisdictional transmission costs, an energy charge based on production and transmission-related non-fuel variable O&M expenses, and a fixed adder of $0.00325 per KWH. The calculations rely on data from the Texas Public Utility Commission's most recent general rate order for EPEC, with a provision for mutual agreement if that data is unavailable.

Section Number_ 1 Revision Number 0
Section Number_ 1 Revision Number 0 Sheet Number 15 Effective with energy consumed on or Page 1 of 4 after SCHEDULE NO. 27 INTERRUPTIBLE POWER SERVICE RATE

AI summary This document segment introduces Schedule No. 27, which outlines the Interruptible Power Service Rate. The schedule defines the specific tariff structure and conditions under which customers can receive electricity under an interruptible power service agreement, where the utility may temporarily reduce or interrupt power supply during periods of high demand.

DETERMINATION OF DEMAND AND ENERGY
DETERMINATION OF DEMAND AND ENERGY Maximum demand will consist of both firm and interruptible demand, and will be defined as the highest thirty (30) minute average kilowatt load determined by measurement. The measured demand will be adjust...

AI summary The document outlines the methodology for determining and billing maximum demand and energy for industrial customers under a power service contract. It defines maximum demand as the highest 30-minute average kilowatt load, adjusted for metering. It establishes specific rules for calculating 'Total Billing Demand' based on on-peak (10:00 A.M. to 8:00 P.M. MST, weekdays) and off-peak periods. Furthermore, it differentiates between Firm and Interruptible Power/Energy for billing purposes, ensuring that Firm Power Billing Demand does not fall below the Minimum Firm Contract Capacity.

RATING PERIOD SELECTION OPTION
RATING PERIOD SELECTION OPTION Upon written request by the Customer and approval by EPEC, Customer may shift his 10-hour peak period for billing purposes by two (2) hours around the normally defined on-peak period. Customer may exercise th...

AI summary The text outlines a provision allowing customers to request a shift in their 10-hour peak period for billing purposes. With written request and approval from EPEC, customers can move the peak period by up to two hours in either direction from the standard on-peak period. This option is limited to two instances within a single twelve-month billing cycle.

Section Number_ 1 Revision Number0
Section Number_ 1 Revision Number0 Sheet Number_ 15 Effective with energy consumed on or Page 3 of 4 after (N)

AI summary The provided text is a header fragment from a regulatory document, specifically a tariff or rate schedule sheet. It identifies the section number, revision number, sheet number, and page number. It also contains a placeholder for 'interruptible power service' (N) and indicates that the rates are effective for energy consumed on or after a specific date, though the specific date is not provided in this fragment.

The Company's Rules and Regulations apply to service under this schedule.
The Company's Rules and Regulations apply to service under this schedule. Section Number_ 1 Revision Number 0 Sheet Number 15 Effective with energy consumed on or Page 4 of 4 after EL PASO ELECTRIC COMPANY INTERRUPTIBLE RATE CALCULATION TR...

AI summary The document provides a cover page for a rate calculation schedule for El Paso Electric Company. It specifies that the Company's Rules and Regulations apply to the service under this schedule. The specific schedule pertains to Interruptible Rate Calculation for Transmission Voltage Customers for the test year ending June 30, 1993.

APPLICABILITY
APPLICABILITY Electric service billed under rate schedules having a Fixed Fuel Factor Clause shall be subject to a Fixed Fuel Factor.

AI summary The text specifies the scope of applicability for the Fixed Fuel Factor. It states that electric services billed under rate schedules that include a Fixed Fuel Factor Clause are required to be subject to the Fixed Fuel Factor.

The Fixed Fuel Factors recognize loss adjustments due to different voltage levels of service:
The Fixed Fuel Factors recognize loss adjustments due to different voltage levels of service: Energy Loss Factor Fixed Fuel Factor ($/KWH) A. Texas System 1.00000 0.03631 (1) B. Transmission Voltage (If customer is not specified below and...

AI summary The document details the Fixed Fuel Factor (FFF) calculations for different voltage levels of service, specifically highlighting loss adjustments. It provides a breakdown of energy loss factors and corresponding Fixed Fuel Factors in dollars per kilowatt-hour ($/KWH) for the Texas System, Transmission Voltage (69,000 volts and higher), Primary Voltage (2,400 to 69,000 volts), and Secondary Voltage (480 volts and below). The rates are categorized by various schedule numbers.

Section 56
Schedule GP Customer .................................... Schedule PT Customer ..... 21.5% of (CT) (CR) (CT) (CR) Credit on Demand Reduction, per kW 18.2. MONTHLY RATE: 18.3. BILLING DEMAND: The minimum monthly billing demand for all Custo...

AI summary The text outlines the rate structures and credit mechanisms for two types of customers (Schedule GP and Schedule PT) under a demand reduction rider. It specifies a minimum monthly billing demand of 1000 kW. Customers receive monthly credits based on their actual demand reduction during interruption periods, provided they meet contracted targets. Specifically, GP customers receive a credit of 33% of the Demand Charge price, while PT customers receive 21.5%. Failure to meet the contracted reduction results in the repayment of all credits issued during that contract year.

Original Sheet No. 38
Original Sheet No. 38 Replacing Sheet No. 38 Issued 4/10/95 the second second second second second second second second second second second second second second second second second second second second second second second second second...

AI summary The document is a header page for a rate schedule filing by the Empire District Electric Company. It indicates that the schedule was issued on April 10, 1995, and is effective as of the 24-98 period. The text contains a repetitive typographical error in the 'Replacing' field. It identifies the service type as 'Electric All' and serves as a formal identification for Part III of the rate schedule.

Section 58
Title: INTERRUPTIBLE SERVICE (Rider IR) PSC File Mark Only - 18.6. SPECIAL CONDITIONS OF SERVICE: - 18.6.1. This rider requires a service contract which specifies the amount of demand available for reduction. The contracted demand reductio...

AI summary This section outlines the special conditions of service for Rider IR (Interruptible Service). Key requirements include a mandatory service contract specifying a minimum demand reduction of 500 kW, with annual contracts signed by December 31. The Company reserves the right to ensure contracted loads are reducible during peak periods. Customers are responsible for load monitoring, and the Company provides a minimum of one hour's notice for reductions, limited to 400 hours per year. The service is initially limited to ten customers for an experimental one-year period.

- 18.6.9. Credits shall be applied to bills the month after such credits are earned.
- 18.6.9. Credits shall be applied to bills the month after such credits are earned. AKKANSA 45 PUBL IC SE KVICI - 00 DIVINISSION Revis Repla heet N 34 34 Issued 4/10/95 Name of C Company: THE EN PIRE DISTRI CT ELECTRIC COMPANY Kind of Se...

AI summary The document outlines the Energy Cost Recovery Rider (ECR) for the Connecticut Electric Company. It specifies that credits are applied to customer bills the month following they are earned. The rider establishes a formula to determine the Energy Cost Factor (ECF) per kilowatt-hour, based on the Energy Cost Rate (ECR). The ECR is calculated by summing fuel expenses (FE) and purchased energy expenses (PE) for a specific period, adjusted for carrying charges and other variables.

9.2. AVAILABILITY
9.2. AVAILABILITY To all electric service required by any Customer with maximum demand of 1,000 kW or greater on the premises, when supplied at one point of delivery and measured through one meter. Applicable to standby or supplementary se...

AI summary This section defines the scope of 'Availability' charges, specifying that they apply to electric service for customers with a maximum demand of 1,000 kW or greater at a single point of delivery measured through one meter. The charges are applicable to standby or supplementary services, and to interruptible services only when provided in conjunction with the relevant Rider. The provision explicitly excludes resale or shared services.

9.3. CHARACTER OF SERVICE
9.3. CHARACTER OF SERVICE Single- or three-phase, 60 cycles and at one standard delivery voltage required by Customer and available at Customer's service location where service is delivered and metered at voltages less than 13,800Y/7,960....

AI summary The document defines the standard character of service for customers, specifying that power is provided as single- or three-phase, 60 cycles, at the standard delivery voltage required by the customer. It establishes that these services are metered at voltages less than 13,800Y/7,960. For service delivered or metered at voltages exceeding this threshold, the text directs customers to Rate Schedule No. 18 for applicable adjustments to the Net Monthly Rate.

9.4. NET MONTHLY RATE
9.4. NET MONTHLY RATE (AT, MT) This rate shall remain in effect until modified or terminated in accordance with its terms or applicable regulations or laws. 1st Revised Sheet No.: 9.2 Docket No.: 99-249-U Replacing: Original Sheet No.: 9.2...

AI summary This document section specifies the 'Net Monthly Rate' for Large Power Service under the Time-Of-Use PST schedule. It establishes that the rate remains in effect until modified or terminated by regulations or laws. The rate applies to Commercial/Industrial electric services for Entergy Arkansas, Inc. and references specific docket and order numbers from a previous revision.

(AT)
(AT) Function: Generation Transmission Distribution Customer Total Billing Item Customer Charge: $344.45 Service $24.43 $368.88 Demand Charge per kW: Summer Period• All On-Peak kW $9.36 $0.83 $1 .93 $0.00 $12.12 All Excess kW $2.88 $0.25 $...

AI summary The document provides a detailed breakdown of electricity rates and charges, categorized by utility functions (Generation, Transmission, Distribution, and Customer). It specifies 'Billing Item Customer Charges', 'Demand Charges per kW' for different periods (Summer and Other), and 'Energy Charges per kWh' for On-Peak and Off-Peak usage. The data includes specific pricing for 'All On-Peak kW', 'All Excess kW', and 'Demand Credits' based on a previous settlement agreement.

9.4.2. On-Peak Hours
9.4.2. On-Peak Hours Summer Period: Other Period 1:00 p.m. -8:00p.m. Monday- Friday 7:00 a.m. -6:00p.m. Monday- Friday

AI summary The document defines the specific timeframes for 'On-Peak Hours' during the Summer Period. It identifies the On-Peak window as 1:00 p.m. to 8:00 p.m. from Monday to Friday, while the 'Other Period' is defined as 7:00 a.m. to 6:00 p.m. from Monday to Friday.

9.4.3. Off-Peak Hours
9.4.3. Off-Peak Hours All hours not designated as on-peak hours. 2"d Revised Sheet No.: 9.3 Replacing: 1 51Revised Sheet No.: 9.3 Entergy Arkansas, Inc. Name of Company Kind of Service: Electric Class of Service: Commercial/Industrial Dock...

AI summary This document section defines 'Off-Peak Hours' as all hours not designated as on-peak hours. It is part of a revised rate sheet (Revised Sheet No. 9.3) for Entergy Arkansas, Inc., specifically concerning Large Power Service under a Time-Of-Use PST. The filing pertains to the Commercial/Industrial class of service for Docket No. 04-052-TF.

9.4.4. Minimum
9.4.4. Minimum Function: Billing Item Customer Charge: Generation Transmission Distribu lion $344.45 Customer Service $24.43 Total $368.88 Demand Charge per kW: Highest kW established in the twelve months ending with the current month: $1....

AI summary The document specifies the minimum charges for customers under a specific rate schedule. It provides a breakdown of the total monthly charge of $368.88, which includes components for Generation, Transmission, Distribution, and Customer Service. Additionally, it defines the Demand Charge per kW as $2.21, broken down into its respective components across the same categories. The text also notes that energy cost recovery factors are applied based on energy consumed, subject to potential reductions under Rate Schedule No. 18.

9.4.5. Adjustments
9.4.5. Adjustments Applicable Riders which adjust this Rate Schedule are listed in Rate Schedule No. 17, Table of Riders Applicable to Rate Schedules.

AI summary The document section briefly addresses the adjustments applicable to the specific Rate Schedule. It directs the reader to Rate Schedule No. 17, Table of Riders Applicable to Rate Schedules, to identify the specific riders that modify the primary rate structure.

9.5. DEMAND
9.5. DEMAND The kW or kVA, if kVA metered, as shown by or computed from the readings of the Company's demand meter, for the 15-minute period of greatest use during the month, subject to the following: 1. If kVA metered: Billing kW =Metered...

AI summary The document outlines the methodology for calculating demand charges based on the 15-minute period of greatest use during a month. It specifies conversion factors for kVA metering (multiplying by 0.9) and establishes a minimum billing threshold of 1,000 kW for on-peak demand. Additionally, it defines 'Excess Demand' as the amount by which Off-Peak Demand exceeds On-Peak Demand.

9.6. PAYMENT
9.6. PAYMENT The monthly bill shall be computed in accordance with the Net Monthly Rate, other provisions of the rate schedule and all applicable riders. Payment shall be made in accordance with Rate Schedule No. 29, Charges Related to Cus...

AI summary This section outlines the payment requirements for commercial and industrial customers under the Large Power Service - Time-Of-Use PST rate schedule. It specifies that monthly bills are calculated based on the Net Monthly Rate, alongside other rate schedule provisions and applicable riders. Payments must be made in compliance with Rate Schedule No. 29, Charges Related to Customer Activity, paragraph 29.18.1.

41.2.3. NONFIRM DEMAND
41.2.3. NONFIRM DEMAND 41.2.3.1. For Large General Service Time-of-Use and Large Power Service Time-of-Use Customers, the monthly Nonfirm Demand shall be the difference between the monthly on-peak billing demand including any modifications...

AI summary This section defines the calculation methodology for Nonfirm Demand for specific commercial and industrial customer classes under the Optional Interruptible Service Rider (OIS). For Large General Service and Large Power Service Time-of-Use customers, Nonfirm Demand is calculated as the difference between the monthly on-peak billing demand (including specific modifications) and the maximum demand registered for the current month, with a minimum value of zero. A similar calculation applies to non-Time-of-Use Large General Service and Large Power Service customers.

41.2.9. ON-PEAK HOURS
41.2.9. ON-PEAK HOURS Summer Months 1 :00 p.m. - 8:00 p.m. Monday- Friday Other Months 7:00a.m. - 6:00p.m. Monday- Friday Sheet No.: 41 .3 Docket No.: 96-360-U Replacing: Sheet No.: Effective: 6/24/99 Order No.: 39 Entergy Arkansas, Inc. N...

AI summary The document specifies the defined 'On-Peak' hours for electricity service under Rate Schedule 41 for Entergy Arkansas, Inc. On-peak periods are designated as 1:00 p.m. to 8:00 p.m. during summer months (Monday-Friday) and 7:00 a.m. to 6:00 p.m. during other months (Monday-Friday). This information pertains to the Optional Interruptible Service (OIS) for Commercial/Industrial electric service.

41.4.1. The maximum hours per interruption are as follows:
41.4.1. The maximum hours per interruption are as follows: Days Per Interruptions Hours Per Hours Per Season Month Per Day Interruption Month Summer Months 10 1 4 35 Other Months 10 2 3 55 - 41 .4.2. The Company shall not discriminate amon...

AI summary The document specifies the maximum allowable hours and frequency for power interruptions for customers under a specific Rider. During summer months, the limit is set at 1 interruption per day for a maximum of 4 hours, totaling 35 hours per month. During other months, the limit is 2 interruptions per day for a maximum of 3 hours each, totaling 55 hours per month. Additionally, the Company is required to provide non-discriminatory service and make best reasonable efforts to interrupt customers equally.

(MT)
(MT) Function: Generation Transmission Distribution Customer Total Billing Item Service Monthly Minimum Demand Charge per kW: Applied to the lesser of the highest total demand established after the effective date of the Agreement for Inter...

AI summary The document provides a breakdown of the 'Charge per kW' for 'Monthly Minimum Demand' across different utility functions: Generation, Transmission, Distribution, and Customer Service. These charges are applied to the lesser of the highest total demand established after the effective date of the Agreement for Interruptible Service or the Firm Contract Demand. The total combined charge across all functions is $2.28 per kW.

41.7. OTHER PROVISION
41.7. OTHER PROVISION Except as modified herein, all provisions of the applicable Rate Schedules will apply. 151Revised Sheet No.: 18.1 Docket No.: 99-249-U Order No.: 15 Replacing: Original Sheet No.: 18.1 Effective: 3/9/01 Entergy Arkans...

AI summary This section specifies that all existing provisions of the applicable Rate Schedules remain in effect unless explicitly modified by the current order. The document pertains to Rate Schedule No. 18 for commercial and industrial electric services provided by Entergy Arkansas, Inc.

18.1. AVAILABILITY
18.1. AVAILABILITY Available at the option of the Company to a customer receiving electric service under any approved Small General Service, Large General Service, or Large Power Service Rate Schedules where such service is delivered and/o...

AI summary The text defines the availability of a specific service or option provided by the Company. It is available to customers on approved Small General Service, Large General Service, or Large Power Service Rate Schedules, specifically for services delivered and/or metered at voltages of 13,800Y/7,960 or greater. The text explicitly notes that this provision does not apply to the minimum provision of any Rate Schedule.

18.2. ADJUSTMENT TO NET MONTHLY RATE
18.2. ADJUSTMENT TO NET MONTHLY RATE This rate shall remain in effect until modified or terminated in accordance with its terms or (AT) applicable regulations or laws. 18.2.1. Service is delivered and metered at voltages less than 13,800Y/...

AI summary This section outlines the specific rules for adjusting the net monthly rate based on the voltage levels at which service is delivered and metered. It specifies that for service delivered and metered at voltages below 13,800Y/7,960, there is no reduction in Demand or Energy. However, for service delivered at lower voltages but metered at 13,800Y/7,960 or greater (but less than 115,000 Volts), a 1% reduction in Demand and Energy is applied to account for losses.

(AD
(AD Function: Generation Transmission Distribution Customer Total Billing Item Service Reduce Monthly Demand Charge per kW by: $0.00 $0.00 $0.77 $0.00 $0.77 Reduce Daily Demand Charge per kW, if applicable, by: $0.0000 $0.0000 $0.0253 $0.0...

AI summary This document excerpt details specific tariff billing items related to demand reduction. It specifies a charge of $0.77 per kW for reducing monthly demand and $0.0253 per kW for reducing daily demand, specifically applied to the distribution function. It also defines the service voltage range for customers who own and maintain their own transformation facilities, covering voltages from 13,800Y/7,960 Volts up to 115,000 Volts.

Section 108
1 st Revised Sheet No.: 18.2 Docket No.: 99-249-U Order No.: 15 Replacing: Original Sheet No.: 18.2 Effective: 3/9/01 Entergy Arkansas, Inc. Name of Company Kind of Service: Electric Class of Service: Commercial/Industrial Part IV. Rate Sc...

AI summary This document is a revised rate schedule (Sheet 18.2) for Entergy Arkansas, Inc. regarding electric service for the Commercial/Industrial class. It specifically defines the 'Voltage Adjustment Rider (M1)' for services delivered at 115,000 Volts or greater but metered at a lower voltage.

(AT, MT)
(AT, MT) Function: Generation Transmission Distribution Customer Total Billing Item Service Reduce Demand and Energy by 1.0% for losses; and, Reduce Monthly I Demand $0.00 $0.00 $1.63 $0.00 $1.63 Charge per kW by: Reduce Daily Den nand Cha...

AI summary The document provides a breakdown of billing items related to demand reduction and energy loss reduction for different utility functions, including Generation, Transmission, Distribution, and Customer service. It specifically outlines charges per kW for reducing monthly and daily demand, highlighting a distribution-specific charge of $1.63 for monthly demand reduction and $0.0536 for daily demand reduction. It also specifies service conditions for delivery and metering at 115,000 Volts or greater.

37.1. APPLICATION
37.1. APPLICATION The Rider is applicable to all electric service billed under the rate schedules designated in Attachment A to the Rider, whether metered or unmetered, and subject to the jurisdiction of the Arkansas Public Service Commiss...

AI summary The text defines the scope and effective date of a specific rate Rider. It states that the Rider applies to all electric service billed under the rate schedules listed in Attachment A, covering both metered and unmetered services within the jurisdiction of the Arkansas Public Service Commission (APSC). The Rider is scheduled to become effective on March 23, 1988, or the date of APSC approval, whichever occurs later.

The Net Monthly Rates set forth in EAI's schedules identified below will be increased by the following Rate Adjustments amounts during the billing months of January 2006 through December 2006:
The Net Monthly Rates set forth in EAI's schedules identified below will be increased by the following Rate Adjustments amounts during the billing months of January 2006 through December 2006: Rate Class Rate Schedules Rate Adjustment AN0-...

AI summary The document outlines the proposed Net Monthly Rate adjustments for Entergy Arkansas, Inc. (EAI) for the billing months of January 2006 through December 2006. The table specifies that for various rate classes—including Residential, Small General Service, Large General Service, and Lighting under both AN0-1 and AN0-2—the Rate Adjustment amount is set at $0.00000 per kWh.

42.1. APPLICATION
42.1. APPLICATION To all electric service billed under any rate schedule, whether metered or unmetered, subject to the jurisdiction of the Arkansas Public Service Commission ("APSC").

AI summary The document identifies the scope of the application, stating that it applies to all electric service billed under any rate schedule, including both metered and unmetered services, that fall under the jurisdiction of the Arkansas Public Service Commission (APSC).

APPLICABILITY:
APPLICABILITY: To all electric service of one standard voltage required on the customer's premises, delivered at one point and metered at or compensated to that voltage for any customer with a demand, as determined under the Special Applic...

AI summary The text specifies the applicability of certain terms or provisions to electric services. It applies to customers with a demand of 500 kW or greater, as determined by the Special Applicability Provisions, for service delivered at a single point and metered at or compensated to one standard voltage.

MONTHLY RATE:
MONTHLY RATE: Residential Energy Charge Including Demand Charge: Base Charge$17.00 All consumption (kWh) not greater than 200 hours times the billing demand: First 3,000 kWh All consumption (kWh) in excess of 200 nours and not greater than...

AI summary The text outlines the residential energy charge structure, which includes a base charge of $17.00 and a tiered consumption rate based on the number of hours the billing demand is active. It establishes a minimum monthly bill calculation incorporating the base charge, billing demand, excess kVAR charges, and Fuel Cost Recovery. Additionally, it specifies a separate rate for metered outdoor lighting, capped at the lesser of the standard residential calculation or a flat rate of $38.60 plus Fuel Cost Recovery.

SCHEDULE: "PLL-4"
SCHEDULE: "PLL-4" PAGE 2 of 4 With Bills Rendered for the Billing Month of January, 2006 REVISION Original 3.14 Commercial Energy Charge Including Demand Charge: Base Charge$17.00 All consumption (kWh) not greater than 200 hours times the...

AI summary The document provides a detailed breakdown of the commercial and industrial energy charges for the billing month of January 2006. It specifies the base charges, tiered consumption rates for kilowatt-hours (kWh) based on hours of use, and minimum monthly bill calculations. It also outlines specific pricing for metered outdoor lighting, including a provision to use the lesser of the standard billing calculation or a fixed per-meter rate, both subject to Fuel Cost Recovery.

DETERMINATION OF BILLING DEMAND:
DETERMINATION OF BILLING DEMAND: The Billing Demand shall be based on the highest 30-minute kW measurement during the current month and the preceding eleven (11) months. For the billing months of June through September, the Billing Demand...

AI summary The text defines the methodology for determining Billing Demand for customers. It establishes that Billing Demand is generally based on the highest 30-minute kW measurement over a 12-month period. Specific rules are provided for summer months (June through September) and winter months (October through May), involving percentages of historical peak demands. Additionally, it sets a floor for Billing Demand, ensuring it is never less than the contract minimum, 50% of the total contract capacity, or 500 kW.

Limitation of Service
Limitation of Service Service will be provided hereunder for those customers having a calculated demand of 500 kW or greater where that calculation is the greater of: (1) Applying Sixty percent (60%) to the current or previous Eleven (11)...

AI summary The text defines the specific criteria for the 'Limitation of Service' for customers with a calculated demand of 500 kW or greater. The calculation is determined by taking the greater of two values: 60% of the current or previous 11 months of winter or off-peak demands, or 95% of the current or previous 11 months of summer or on-peak demands. It also notes that customers on Off-Peak (OP) and Variable Off-Peak (VOP) riders must follow the specific percentages defined in those riders.

DESCRIPTION:
DESCRIPTION: This tariff allows customers to participate in credits for demand reduction. Customers will receive credits in exchange for reducing electric demand during periods in which the Company is experiencing extreme supply and demand...

AI summary The text describes a tariff mechanism that provides customers with bill credits in exchange for reducing their electric demand during periods of extreme supply and demand conditions. To participate, customers must reduce demand during specified time periods, with the company providing a minimum of 30 minutes' notice for such requests.

Section 158
The customer and the Company will agree on the customer's Firm Demand Level (FDL) in kilowatts. The customer must reduce demand to the FDL or lower during all reduction periods. At the end of each billing month which includes a reduction p...

AI summary The text outlines the methodology for calculating energy and demand credits for customers participating in a demand reduction program. It specifies that customers must adhere to a Firm Demand Level (FDL) and receive credits based on the reduction of actual energy and demand below the Normal Electric Demand (NED) during specific periods, such as OPEC Peak Periods. It also establishes that the FDL must be lower than the Contract Billing Level (CBL) for customers on RTP tariffs.

COMPLIANCE INCENTIVE:
COMPLIANCE INCENTIVE: If the customer's actual metered demand during a reduction period is greater than the FDL, the customer will be charged a compliance incentive of $3.50 per kW for each kW above the FDL during each hour of the reductio...

AI summary The text outlines the compliance incentive structure for customers participating in a demand reduction program. If a customer's metered demand exceeds the Firm Demand Level (FDL) during a reduction period, they are charged $3.50 per kW for the excess. The maximum penalty includes the forfeiture of the demand credit plus $9.00 per kW of annual actual demand reduction. The annual reduction is calculated as the difference between the Normal Electric Demand (NED) and the FDL during the OPEC Peak Period, with a grace period of two 30-minute intervals of non-compliance per year.

TERM OF CONTRACT: -
TERM OF CONTRACT: - The contract term is one year. The customer is required to remain on the OPEC tariff for a period of twelve months from the contract date. The contract will be automatically renewed on the anniversary date of the contra...

AI summary The document specifies the contractual terms for a customer on the OPEC tariff. It establishes a mandatory one-year commitment period starting from the contract date. The agreement includes an automatic annual renewal provision, which can be terminated by either party provided that a 30-day written notice is submitted to the Company.

All bills rendered subject to the Fuel Cost Recovery Schedule shall be respectively increased in an amount equal to:
All bills rendered subject to the Fuel Cost Recovery Schedule shall be respectively increased in an amount equal to: Secondary Distribution customers 2.4581 ¢per kWh Primary Distribution customers 2.4190¢ per kWh Transmission customers 2.3...

AI summary The document specifies the rate increases for customers subject to the Fuel Cost Recovery Schedule. It provides a breakdown of the specific cents per kilowatt-hour (¢per kWh) to be added to bills for three distinct customer classes: Secondary Distribution, Primary Distribution, and Transmission customers. The text also introduces the definition of Fuel Costs as the underlying basis for these adjustments.

APPLICABILITY:
APPLICABILITY: The MTC will be applied to all customers in the Georgia Power territory as it existed on June 30, 2006 and will be designed to distribute all amounts collected by the MTA to customers in the Georgia Power territory as it exi...

AI summary The text defines the applicability of the Main Terms Charge (MTC) within the Georgia Power territory as of June 30, 2006. It specifies that the MTC is designed to distribute amounts collected by the Main Terms Agreement (MTA) to customers on a per kilowatt-hour basis. However, a specific exclusion is noted: the MTC does not apply to Real-Time Pricing (RTP) customers for usage exceeding their Contract Billing Level (CBL), as these customers are not subject to the higher fuel charges the MTC is intended to compensate.

GENERAL TERMS & CONDITIONS
GENERAL TERMS & CONDITIONS The adjustment calculated under this rider is subject to change in such an amount as may be approved and/or amended by the Georgia Public Service Commission. Service hereunder subject to Rules and Regulations for...

AI summary The text outlines the general terms and conditions for a specific rate rider. It specifies that the calculated adjustments are subject to approval or amendment by the Georgia Public Service Commission. Additionally, it notes that the services provided under this rider are governed by the Rules and Regulations for Electric Service maintained by the same commission.

N-40RIRs Attachment SEB-NSPI - 2a, pt. 5 (Large File - 20 MB) 87 passages
Kilowatt Charge:
Kilowatt Charge: $4.65 for each Kilowatt of Billing Demand but not less than $46,500

AI summary The document specifies the Kilowatt Charge for billing demand, established at a rate of $4.65 per Kilowatt. It further stipulates a minimum charge requirement of $46,500 for this component of the billing structure.

Kilowatt-hour Charge:
Kilowatt-hour Charge: 1.20¢ each for the first 500,000 kilowatt-hours 0.70¢ each for the next 4,500,000 kilowatt-hours 0.65¢ each for all additional kilowatt-hours

AI summary The document outlines the specific tiered kilowatt-hour (kWh) charge structure. It specifies a rate of 1.20¢ per kWh for the first 500,000 kWh, a reduced rate of 0.70¢ per kWh for the next 4,500,000 kWh, and a final rate of 0.65¢ per kWh for any usage exceeding 4,500,000 kWh.

Determination of Kilowatts of Billing Demand:
Determination of Kilowatts of Billing Demand: The Kilowatts of Billing Demand for each month will be the average kilowatt load used by the Customer during the 15-minute period of maximum use during the twelve-month period ending with the c...

AI summary The text defines the methodology for determining the 'Kilowatts of Billing Demand' for customers. It specifies that the demand will be calculated as the average kilowatt load during the 15-minute peak usage period over the preceding twelve-month period. Additionally, it establishes a floor of 80% of the contracted load and notes that this demand is subject to the Power Factor Adjustment Clause.

Capacity Charge for Highly Fluctuating Loads:
Capacity Charge for Highly Fluctuating Loads: Should the Customer operate equipment with highly fluctuating, intermittent, or abnormal characteristics that make it necessary for the Company to install special facilities to serve the Custom...

AI summary The text outlines a specific tariff provision for customers operating equipment with highly fluctuating, intermittent, or abnormal characteristics. If these characteristics necessitate the installation of special facilities by the Company to maintain service stability or prevent disturbances to other customers, an additional capacity charge is applied. The charge is set at $1.00 per month per kilovolt-ampere (KVA) or fraction thereof of the transformer capacity installed specifically to serve that customer.

Power Factor Adjustment:
Power Factor Adjustment: The Company reserves the right to determine the power factor of the Customer's installation served hereunder. Should the power factor at the time of establishment of any 15 minute period of maximum use during the m...

AI summary The Company outlines the methodology for applying a Power Factor Adjustment to customer billing. It reserves the right to determine the power factor of a customer's installation. If the power factor during any 15-minute period of maximum monthly use falls below 90%, the Customer's Kilowatts of Billing Demand will be adjusted upward. This calculation is performed by multiplying the Kilowatts of Billing Demand by 90% and dividing by the actual power factor recorded at the time of maximum use.

Fuel Adjustment:
Fuel Adjustment: In addition to all other charges, the amount of the Customer's bill will be adjusted by an amount per kilowatt-hour calculated according to the formula in the Fuel Adjustment Rider-Louisiana.

AI summary The document specifies that customer bills will be subject to an additional adjustment per kilowatt-hour. This adjustment is calculated based on a specific formula defined in the Fuel Adjustment Rider-Louisiana.

2006 Fuel Adjustment Factors - louisiana
2006 Fuel Adjustment Factors - louisiana Billing Month Transmission - 138 kV Transmission - 69 kV Primary Substation Primary Secondary January $0.020760 $0.020961 $0.021064 $0.021226 $0.021843 February $0.021392 $0.021600 $0.021707 $0.0218...

AI summary The document provides a detailed schedule of 2006 fuel adjustment factors for Louisiana, categorized by billing month and various transmission and distribution levels (Transmission 138 kV, 69 kV, Primary Substation, Primary, and Secondary). Additionally, it outlines the rates, charges, and fees for large lighting and power service, specifying kilowatt and kilowatt-hour charges based on demand thresholds and referencing Schedule FC for base rate increases.

Section 19
Should the Customer operate equipment with highly fluctuating, intermittent, or abnormal characteristics that make it necessary for the Company to install special facilities to serve the Customer or to prevent disturbances to the service o...

AI summary The text outlines a specific tariff provision regarding customers who operate equipment with highly fluctuating, intermittent, or abnormal characteristics. If such equipment necessitates the installation of special facilities by the Company to maintain service quality for the customer or others, the Customer will be subject to an additional monthly charge of $1.00 per KVA or fraction thereof of the transformer capacity installed.

SCHEDULE CONSISTS OF 3 SHEET (5)
SCHEDULE CONSISTS OF 3 SHEET (5) SECTION TITLE RATES, CHARG ES AND FEES SHEET NUMBER 10A.02 SECTION NUMBER 4.02 EFFECTIVE DATE ALL AREAS ORIGINAL 1 APPLICABLE REVISION NUMBER - INTERRUPTIBLE F POWER SERVICE (IF (S) Continued PAYMENT FOR SE...

AI summary This document is a page from a tariff manual for the Public Utility Commission of Texas. It outlines the payment terms for Interruptible Power Service (IPS), specifying that bills are due 16 days after issuance. It establishes a 2% penalty for late payments and notes that service may be disconnected for non-payment in accordance with standard terms and conditions. The text also references a specific contract and docket number from 1991.

FIXED FUEL FACTOR
FIXED FUEL FACTOR Electric service billed under applicable rate tariffs shall be subject to this Fixed Fuel Factor in accordance with the Substantive Rules of the Public Utility Commission of Texas Section 25.237. The Fixed Fuel Factor is...

AI summary The document defines the application of the Fixed Fuel Factor to electric service billed under applicable rate tariffs. It specifies that the factor must be applied in accordance with the Substantive Rules of the Public Utility Commission of Texas Section 25.237. The calculation involves multiplying the Fixed Fuel Factor by the kilowatt-hour (kWh) sales, which are read, estimated, or determined based on metering voltage provisions during a specific billing month.

The Fixed Fuel Factors are:
The Fixed Fuel Factors are: Service Voltage February- July Aug - January Transmission- 138 kV $.034499 $.023743 Transmission- 69 kV $.034835 $.023975 Primary Substation \ $.035007 $.024093 Primary $.035308 $.024300 Secondary $.036301 $.024...

AI summary The document provides a schedule of Fixed Fuel Factors for various service voltages and categories, including Transmission (138 kV and 69 kV), Primary Substation, Primary, and Secondary services. The factors are differentiated by season, providing specific rates for the February-July period and the August-January period.

BASE RATE REVENUE PERCENTAGES
BASE RATE REVENUE PERCENTAGES Major Rate Classes % of Base Rate Revenue Residential 2.2139% Commercial & Sm. Industrial 1.0562% Large Industrial 1.7827% Municipal 1.1159% Lighting 0.7003% ANNUAL REDETERMINATION

AI summary The document provides a breakdown of the distribution of base rate revenue across five major rate classes in Nova Scotia. It shows that the Residential rate class accounts for the largest share at 2.2139%, followed by Large Industrial (1.7827%), Municipal (1.1159%), Commercial & Sm. Industrial (1.0562%), and Lighting (0.7003%). The section also introduces the concept of annual redetermination of these percentages.

MILITARY BASE ADJUSTMENT FACTOR
MILITARY BASE ADJUSTMENT FACTOR Military Base Adjustment Factor shall be effective with the first billing cycle of May 2006 and will remain in effect Wltil revised eacl). year in accordance with PURA Section 36.354. Electric service suppli...

AI summary The text defines the application and billing procedures for the Military Base Adjustment Factor, which became effective in May 2006. It specifies that the factor applies to all kilowatt-hours billed across all rate schedules, including estimated usage for unmetered accounts. The factor must be clearly identified on customer bills and is explicitly excluded from accounts eligible for the Federally Owned or Operated Military Base Discount, in accordance with PURA Section 36.354.

MONTHLY FACTOR
MONTHLY FACTOR $.0000515 per billing kWh

AI summary The document specifies a monthly factor value of $0.0000515 per billing kWh, which is a component of the utility's tariff structure.

IDSTORJCAL ADJUSTMENTS AND TRUE-UP
IDSTORJCAL ADJUSTMENTS AND TRUE-UP The Military Base Adjustment Factor shall be based on actual historic usage and adjusted in May of each year to include the over/under recovery from the previous year. PUBUC UTIIJiY OOMMISSfllNOFTmS APPRO...

AI summary The document specifies the methodology for the Military Base Adjustment Factor, stating that it will be based on actual historic usage. It further establishes that the factor will be adjusted annually in May to account for any over-recovery or under-recovery from the preceding year. The text appears to be an excerpt from a tariff for electric service applicable to the entire system.

APPLICATION
APPLICATION Applicable to all standard rates and all kilowatt-hours sold thereunder. For electric service billed under applicable rate schedules for which there is not metering, the monthly kilowatt-hour usage shall be estimated by the Com...

AI summary The application outlines the methodology for applying the Purchased Power and Conservation Factor to all standard electricity rates and kilowatt-hours sold. It specifies that for unmetered services, kilowatt-hour usage will be estimated by the Company. Additionally, the application notes that the cost of demand-side management (DSM) and renewable energy resources, approved during the integrated resource planning process and not recovered in base rates, will be added to the charges of the applicable rate schedules.

Method of Calculation For Purchased Power and Conservation Factor
Method of Calculation For Purchased Power and Conservation Factor A Purchased Power and Conservation Factor (PPCF) is calculated annually for each major rate class. The formula for the PPCF is as follows: PPCF = Demand Side Management cost...

AI summary The document defines the methodology for calculating the Purchased Power and Conservation Factor (PPCF) for major rate classes. The calculation is performed annually and is based on a formula that combines Demand Side Management (DSM) costs and Renewable Energy Resource (RER) costs, divided by the estimated kilowatt-hour (kWh) sales.

- AAF = Adjusted Allocation Factor is ((((DP TU) \ D) / BPS) \ S) for each listed major rate class / divided by the sum of this calculation for all listed major rate classes.
- AAF = Adjusted Allocation Factor is ((((DP TU) \ D) / BPS) \ S) for each listed major rate class / divided by the sum of this calculation for all listed major rate classes. PUSLIC UTILI N CUMINIS APPROVE SIGHT OF TEXAS OCT 14 '05 DOCKET...

AI summary The document snippet provides the mathematical formula for the Adjusted Allocation Factor (AAF), which is used to determine the distribution of costs across major rate classes. The calculation incorporates variables including Estimated costs of DSM resource contracts (DP), True-Up amounts (TU), a specific factor (D), Base Power Sales (BPS), and a secondary factor (S). The text also references a 2005 docket from the Public Utility Commission of Texas regarding electric service tariffs.

BPS = Base Period Adjusted Kilowatt-hour Sales are the sales utilized to calculate the Kilowatt-hour rate for the first year of the PPCF. These kWh sales figures are as follows:
BPS = Base Period Adjusted Kilowatt-hour Sales are the sales utilized to calculate the Kilowatt-hour rate for the first year of the PPCF. These kWh sales figures are as follows: Major Rate Class Base Period kWh Sales Residential 2,192,184,...

AI summary The document defines Base Period Adjusted Kilowatt-hour Sales (BPS) as the sales figures used to calculate the Kilowatt-hour rate for the first year of the Power Purchase Cost Factor (PPCF). It provides a breakdown of these kWh sales across four major rate classes: Residential, Commercial, Industrial, and Lighting. Additionally, it introduces the Demand Allocation Factor (D), which is derived from the company's most recent cost allocation study.

SWEPCO Demand Allocation Table
SWEPCO Demand Allocation Table Customer Class Allocator Residential 37.58% Commercial 46.32% Industrial 14.50% Lighting 1.6% S= Estimated annual kWh sales for each major rate class.

AI summary The document presents a demand allocation table for SWEPCO, which specifies the percentage of costs attributed to different customer classes. The allocation is distributed across four categories: Commercial (46.32%), Residential (37.58%), Industrial (14.50%), and Lighting (1.6%). This table is used to determine how costs are shared among various consumer segments based on their specific demand profiles.

Method of Calculation For Renewable Energy Resources(RER)
Method of Calculation For Renewable Energy Resources(RER) RER = (ERC - TIJ) \ AAF: - ERC = Estimated costs of renewable energy resources in connection with the Company's integrated resource planning process or as a result of a Commission-a...

AI summary The document outlines the specific mathematical formulas and methodology for calculating Renewable Energy Resources (RER) costs within the electricity tariff. It defines the components for calculating the Adjusted Allocation Factor (AAF), which incorporates Estimated costs of renewable energy resources (ERC), True-Up amounts (TU) to reconcile variances between actual costs and revenue, Demand Allocation Factors (DE), Base Power Sales (BPS), and a scaling factor (S). These calculations are intended to determine the distribution of costs across major rate classes for cost recovery via the Power Purchase Cost Factor (PPCF).

Residential Rate Class:
Residential Rate Class: Basic Service Basic Service with Water Heating Basic Service with Space Heating Basic Service with Water & Space Heating

AI summary The provided text serves as a heading and a list of sub-categories within the Residential Rate Class. It outlines the different service tiers available to residential customers, specifically distinguishing between 'Basic Service' and variations that include 'Water Heating', 'Space Heating', or both 'Water & Space Heating'.

Industrial Rate Class:
Industrial Rate Class: Large Lighting & Power Service Standby Service Metal Melting Service Distribution Metal Melting Service 69 kV & Above Oil Field Large Industrial Power Contract with Lone Star Steel

AI summary The document lists various specific industrial rate classes and service categories, including Large Lighting & Power Service, Standby Service, and specialized services for metal melting and oil field operations. It also identifies a specific contract with Lone Star Steel, indicating the scope of industrial service offerings and rate categories relevant to the proceeding.

Commercial Rate Class:
Commercial Rate Class: General Service Lighting & Power Service Municipal Pumping Service Municipal Service As Available Standby Power Service

AI summary The document identifies the specific rate classes categorized under the Commercial Rate Class for the proceeding. These include General Service, Lighting & Power Service, Municipal Pumping Service, Municipal Service, and As Available Standby Power Service.

Lighting Rate Class:
Lighting Rate Class: Street Lighting Service Municipal Street Lighting Service City of Longview Municipal Street & Parkway Lighting Service Public Highway Lighting Service - Energy Only Public Highway Lighting Service Private Lighting Serv...

AI summary The document lists various lighting rate classes and service types under the 'Lighting Rate Class' heading. These include street lighting, municipal street lighting, city-specific services (Longview), public highway lighting, private lighting, and outdoor area lighting. It specifies that these services are governed by Section 4.21, Sheet 47 .. 04 of the tariff, with a revision date of November 1, 2005, and are applicable to the entire system.

PURCHASED POWER AND CONSERVATION FACTOR
PURCHASED POWER AND CONSERVATION FACTOR The following factors will be applied to the energy usage of retail customers beginning with thfi! billing month of November 2005. The factors will be identified on customer bills as "Purchased Power...

AI summary The document introduces the 'Purchased Power and Conservation Factor' (PPCF), which will be applied to the energy usage of retail customers starting in November 2005. This factor is designed to be clearly identified on customer bills to reflect the costs associated with purchased power and conservation efforts.

Purchased Power and Conservation Factor
Purchased Power and Conservation Factor RATE SCHEDULE Residential Service (RS) RATE CODE 015,019,037,038 $per kWh {1) (0.000084} Rider to Residential Service for Con trolled Service to Water Heater (RWH) 011 (0.000084} General Service (GS)...

AI summary The document provides a rate schedule for the Purchased Power and Conservation Factor (PPCF) across various residential and commercial electric service categories. It specifies the dollar amount per kilowatt-hour (kWh) for multiple rate codes, including Residential Service (RS), General Service (GS), Lighting and Power Service (LP) at both secondary and transmission levels, Large Lighting and Power Service (LLP), and Metal Melting Service (MMS). It also includes a specific contract rate for Lone Star Steel Company.

PURCHASED POWER AND CONSERVATION FACTOR (Continued)
PURCHASED POWER AND CONSERVATION FACTOR (Continued) Purchased Power and Conservation Factor RATE SCHEDULE Oil F1eld large Industrial Power Schedule (OLI) RATE CODE 329 $per kWh (1) (0.000087) Municipal Pumping Service (MPS) 540,550 ·(0.000...

AI summary The document provides a table of specific rate factors for the Purchased Power and Conservation Factor (PPCF) across various industrial, municipal, and private service schedules. It lists the specific numerical factors (e.g., 0.000083 to 0.000087) applicable to different service types, including Municipal Pumping Service, Private & Area Lighting Service, and Interruptible Power Service, noted as applicable to both metered and unmetered kilowatt-hours.

Year To Date 2006 Fuel Adjustment Factors D Texas
Year To Date 2006 Fuel Adjustment Factors D Texas Billing Month Transmission - 138 kV Transmission - 69 kV Primary Substation Primary Secondary January $0.023743 $0.023975 $0.024093 $0.024300 $0.024983 February $0.034499 $0.034835 $0.03500...

AI summary The document provides a table of year-to-date 2006 fuel adjustment factors for various service types in Texas, including Transmission (138 kV and 69 kV), Primary Substation, Primary, and Secondary services. It also references specific rate schedules and fuel factors for the Southwestern Public Service Company, including Backbone Service and specific fuel factors for Rate 708 and 709. Additionally, it notes the cancellation of Tariff Number 4300.6 in favor of 4300.7 for Large General Service - Transmission.

Preamble
APPLICABLE: To all commercial and industrial electric service supplied at one point of delivery, and measured through one kilowatt-hour meter, where facilities of adequate capacity and suitable voltage of 69 kV or higher are adjacent to th...

AI summary This document outlines the commercial and industrial electric service rates for a Texas service territory. It specifies demand charges based on kilowatt (kW) usage, energy charges per kilowatt-hour (kWh), and terms of payment including late fees. Additionally, it defines the methodology for determining demand and establishes a power factor adjustment based on reactive demand relative to measured kW demand.

LARGE GENERAL SERVICE - TRANSMISSION
LARGE GENERAL SERVICE - TRANSMISSION - BACKBONE SERVICE DISCOUNT: A discount of $1,125 per customer and $0.15 per additional kW of demand per month will be allowed when service is supplied at a voltage of 115 kV or greater. - LOSS ADJUSTME...

AI summary This section outlines the tariff specifications for Large General Service - Transmission. It details a backbone service discount for high-voltage supply (115 kV or greater), loss adjustment protocols for secondary-side metering, and fuel cost recovery mechanisms. It also specifies the character of service (three-phase, 60 hertz, 69,000 volts or above), a minimum three-year contract period, and requirements for customers to pay for line extensions in advance.

Section 61
Service under this Rider is available when taken in conjunction with firm service under the large general service rate schedules. Supplementary power Service under this Rider is available to QFs and other power production facilities under...

AI summary The text describes the availability and territory for a specific Rider, noting that it can be taken in conjunction with firm service under large general service rate schedules. It further specifies that supplementary power service under this Rider is available to Qualifying Facilities (QFs) and other power production facilities through specific contracts on a case-by-case basis within the Texas Service Territory.

MONTHLY RATE:
MONTHLY RATE: Service Voltage Customer Charge: \ Distribution 115 kV and above If taken in addition to fim1 service $50 $50 $50 If not taken in add tion to finn service $200 $639 $639 Demand Charge (per kW of Interruptible Demand): Instant...

AI summary The document outlines the monthly rate structure for distribution services, specifying customer charges, demand charges for Interruptible Power Service (IPS), and energy charges based on service voltage. It distinguishes between charges for customers who take the service in addition to fim1 service versus those who do not. The rates are categorized by instantaneous and two-hour notice periods for demand charges and are effective as of August 1, 1999.

LIMITATIONS ON INTERRUPTIONS: Interruptions under this Rider are limited as follows:
Operation of the equipment will remain under the control of Company and Company reserves the right to inspect and test all interruption-control equipment and may review Customers' maintenance records. Customer desiring noticed intenuptible...

AI summary This section outlines the operational requirements and penalties for customers utilizing Noticed Interruptible Service. The Company maintains control over interruption-control equipment and requires customers to maintain necessary communications equipment. If a customer fails to reduce their load as requested, the Company reserves the right to discontinue power delivery. A non-compliance penalty is established at 150% of the difference between interruptible and firm demand charges, with specific billing rules for first and second occurrences of non-compliance.

Southwestern Public Service Company Purchased Power Cost Recovery Factor (PCRF) Texas Retail Jurisdiction Current Month 2006 ($/kWh)
Southwestern Public Service Company Purchased Power Cost Recovery Factor (PCRF) Texas Retail Jurisdiction Current Month 2006 ($/kWh) Factor Class January February March April May June July August September October November December Lightin...

AI summary The document presents a monthly Purchased Power Cost Recovery Factor (PCRF) table for the Southwestern Public Service Company's Texas retail jurisdiction for the year 2006. It lists fixed monthly rates in dollars per kilowatt-hour ($/kWh) across various service classes, including Lighting, All Electric, Space Heating, Water Heating, and Heat Pump. The rates remain constant throughout each calendar month for all listed categories.

Southwestern PUBLIC SERVICE Company
Southwestern PUBLIC SERVICE Company COMMISSION SCHEDULE SHEET RATE SCHEDULE NUMBER PUCT IV-69 FUEL COST RECOVERY FACTOR TARIFF NUMBER 7100.24 CANCELLING 7100.23 Page 1 of2

AI summary The document is a title page and introductory section for a regulatory filing by Southwestern Public Service Company. It identifies the regulatory body as the Public Utility Commission of Texas (PUCT) and specifies that the filing pertains to the 'Fuel Cost Recovery Factor' under tariff number 7100.24, which replaces tariff number 7100.23.

SECONDARY DISTRIBUTION FUEL COST RECOVERY FACTOR:
SECONDARY DISTRIBUTION FUEL COST RECOVERY FACTOR: The Secondary Distribution fuel cost recovery factor to be billed is 3.6433¢ per kilowatt-hour and shall apply when service is metered at less than approximately 12 kV.

AI summary The document specifies the Secondary Distribution fuel cost recovery factor, establishing a rate of 3.6433¢ per kilowatt-hour. This rate is applicable to services metered at a voltage of approximately 12 kV or less.

SUB-TRANSMISSION FUEL COST RECOVERY FACTOR:
SUB-TRANSMISSION FUEL COST RECOVERY FACTOR: The Sub-transmission fuel cost recovery factor to be billed is 3.4397¢ per kilowatt hour and shall apply when service is metered at approximately 69 kV and less than approximately 115 kV or Joss...

AI summary The document specifies the Sub-transmission fuel cost recovery factor, which is set at 3.4397¢ per kilowatt-hour. This rate is applicable to services metered at approximately 69 kV and less than 115 kV, or where Joss compensated meters are utilized to account for sub-transmission losses.

Availability
Availability This rate shall apply to the firm electric power requirements of a customer that takes service directly from TVA and where (a) that customer's currently effective contract demand is greater than 25,000 kW and (b) the major use...

AI summary The text defines the eligibility criteria for a specific electric power rate applicable to customers receiving service directly from TVA. To qualify, a customer must have a contract demand exceeding 25,000 kW and primarily use electricity for activities classified under Standard Industrial Classification (SIC) Codes 20 through 39. TVA reserves the right to request certification of these activities. Customers failing to meet the SIC code requirements will be billed under the Direct Service Power schedule.

Base Charges
Base Charges Customer Charge: $1,500 per delivery point per month Demand Charge: $10.36 per kW of billing demand per month plus $0.61 per kW of billing demand per month (environmental adjustment), plus an additional $10.36 per kW per month...

AI summary The text outlines the specific components of the customer charges for electricity delivery. It specifies a fixed monthly base charge of $1,500 per delivery point. It also details demand charges based on billing demand, including a base rate of $10.36 per kW, an environmental adjustment of $0.61 per kW, and penalties for exceeding contract demand. Additionally, it lists monthly kilowatt-hour (kWh) charges including a base rate and a corresponding environmental adjustment.

Adjustment
Adjustment The base demand and energy charges shall be increased or decreased in accordance with the current Adjustment Addendum published by TVA. (In addition, such charges shall be increased or decreased to (a) correspond to increases or...

AI summary The document outlines the methodology for adjusting base demand and energy charges based on the Transmission Valley Authority (TVA) Adjustment Addendum. These adjustments account for changes in the value of hydro-generation benefits allocated to residential consumers and ensure balanced hydro-allocation credits and debits between residential and other consumers. Additionally, the text specifies that facilities rental charges and reactive demand charges may be adjusted to reflect costs associated with delivery at voltage levels below 161 kV and reactive power provision.

Facilities Rental Charge
Facilities Rental Charge There shall be no facilities rental charge under this rate schedule for delivery at bulk transmission voltage levels of 161 kV or higher. For delivery at less than 161 kV, there shall be added to the customer's bil...

AI summary The text establishes the rules for applying a facilities rental charge to customers based on delivery voltage levels. No charge is applied for delivery at bulk transmission voltage levels of 161 kV or higher. For deliveries below 161 kV, a monthly charge per kW is applied, with specific tiered rates for voltages below 46 kV. The charge is calculated based on the higher value between the highest billing demand from the last 12 months and the customer's currently effective contract demand.

Reactive Demand Charges
Reactive Demand Charges If the reactive demand (in kVAR) is lagging during the 3D-consecutive-minute period beginning or ending on a clock hour of the month in which the customer's highest metered demand occurs, there shall be added to the...

AI summary The document outlines the calculation and application of reactive demand charges for customers. It specifies that a charge of $1.46 per kVAR is applied if lagging reactive demand exceeds 33 percent of the metered demand during the 3D-consecutive-minute period of the month's highest metered demand. Additionally, a charge of $1.14 per kVAR is applied to leading reactive demand during the 3D-consecutive-minute period of the month's lowest metered demand (excluding values below 25 percent of the highest demand).

Determination of Demand
Determination of Demand The metered demand for any month shall be the highest average during any 3D-consecutive-minute period beginning or ending on a clock hour of the month of the load metered in kW, and such amount shall be used as the...

AI summary The text defines the methodology for determining metered demand for monthly billing purposes. It establishes that billing demand is based on the highest average load over a 3D-consecutive-minute period starting or ending on a clock hour. Additionally, it provides a specific tiered percentage-based calculation to ensure that the billing demand does not fall below a certain threshold relative to the higher of the current contract demand or the highest billing demand from the previous 12 months.

Minimum Bill
Minimum Bill ( The monthly bill under this rate schedule, excluding any facilities rental charges and any reactive charges, shall not be less than the sum of (1) the base customer charge, (2) the base demand charge, as adjusted (but exclud...

AI summary The document defines the calculation for the minimum monthly bill under a specific rate schedule. It specifies that the minimum bill, excluding facilities rental and reactive charges, must be at least the sum of three components: the base customer charge, the base demand charge (adjusted for billing demand but excluding excess portions), and the base energy charge (adjusted for energy takings).

Single-Point Delivery
Single-Point Delivery The charges under this rate schedule are based upon the supply of service through a single delivery and metering point, and at a single voltage. If service is supplied to the same customer through more than one point...

AI summary The text outlines the billing and metering requirements for the Schedule DSMD rate schedule, specifying that charges are based on a single delivery and metering point at a single voltage. It mandates that if a customer receives service through multiple delivery points or at different voltages, each point and voltage must be separately metered and billed.

(This spreadsheet is for reference purposes only. It is not the TV A Rate Schedule or Adjustment Addendum.)
(This spreadsheet is for reference purposes only. It is not the TV A Rate Schedule or Adjustment Addendum.) RATE SCHEDULE Base Rate October 2003 Adjustment Environmental t;· October 2006;' Adjustment FCA ComQosite Rate Residential Service...

AI summary The provided text is a reference spreadsheet detailing historical rate adjustments for various electricity service schedules. It lists base rates, specific adjustments from October 2003 and October 2006 (including environmental adjustments), and Fuel Cost Adjustment (FCA) values to arrive at a composite rate. The data covers residential service, general power service, and various demand charge components for different industrial or commercial schedules.

Applicable also to the second component of the demand charge
Applicable also to the second component of the demand charge October 2003 Environmental October 2006 Composite RATE SCHEDULE Base Rate Adjustment Adjustment FCA Rate Manufacturing Power Service Schedule DSMB Part 1 Demand Charge \ \ Energy...

AI summary The document provides a detailed rate schedule for Manufacturing Power Services, specifically outlining the components of demand charges and energy charges across different schedules (DSMB, DSMC, and DSMD). It compares base rates from October 2003 with adjustments made in October 2006, including Fuel Cost Adjustments (FCA), to arrive at a composite rate. The data specifies different pricing for the first 620 hours of use versus additional kilowatt-hours (kWh).

Requirements
Requirements FPI is available to SIC-qualified customers with regular requirements of more than 1,000 kW at a single point of delivery.

AI summary The text specifies the eligibility requirements for the Flat Price Interruptible (FPI) service. To qualify, customers must be SIC-qualified and maintain regular requirements exceeding 1,000 kW at a single point of delivery.

Conversion
Conversion Q ualifying customers may convert existing amount~ of VPI, LIP, LFP, or InteJTuptible RTP to like amounts of FPI. Cu rrent VPI customers less than 5 !vJW who convert VPI loads w FPI will no longer retain granclfathered eligibili...

AI summary The text outlines the rules and limitations for customers wishing to convert existing electricity load products—specifically VPI, LIP, LFP, or Interruptible RTP—to Flat Price Interruptible (FPI) amounts. It specifies that customers with less than 5 kW of VPI load will lose grandfathered eligibility upon conversion. Furthermore, it prohibits the conversion of firm power to FPI until existing contract obligations are met and mandates that FPI cannot be mixed with other interruptible products.

Pricing
Pricing Rate schedule firm demand and energy charges are applicable for FPJ demand and energy: including the ratcheted billing demand provisions of the rate schedule . A monthly credit of $3.40 per kW of FPI demand is given. The credit for...

AI summary The text outlines the pricing structure and contractual terms for Flat Price Interruptible (FPI) demand and energy. Key components include a monthly credit of $3.40 per kW of FPI demand, which is subject to annual review and specific notice requirements for adjustments. It details 'Credit Reduction Charges' for non-compliance with suspension obligations, administrative fees, and the exclusion of Growth Credits. Additionally, it specifies technical requirements, such as five-minute interval metering and telephone access for the Transmission Valley Authority (TVA) to verify compliance.

I. APPLICABILITY
I. APPLICABILITY Except as modified herein, this schedule is applicable only to a non-residential transmission or primary voltage Customer (as defined in Paragraph XI.) who elects to receive Electricity Supply Service and Electric Delivery...

AI summary This section defines the applicability criteria for a specific electricity schedule. It applies to non-residential transmission or primary voltage customers who receive Electricity Supply and Electric Delivery services and have a peak measured demand of at least 500 kW during at least three billing months within the current and previous 11 billing months. It also outlines the conditions for remaining on the schedule if demand drops below 500 kW and the process for orderly transfer to other schedules once requirements are no longer met.

II. 30-DA Y RATE
II. 30-DA Y RATE - A. Distribution Service Charges - 1. Basic Customer Charge Basic Customer Charge $127.60 per billing month. - 2. Plus Distribution Demand Charge First 5000 kW of Distribution Demand Additional kW of Distribution Demand @...

AI summary This section outlines the Distribution Service Charges for the 30-DA Y Rate. It specifies a Basic Customer Charge of $127.60 per billing month. Additionally, it details the Distribution Demand Charge, which applies to the first 5,000 kW of Distribution Demand and sets a rate of $0.755 per kW for any additional kilowatts exceeding that initial amount.

III. DETERMINATION OF ON-PEAK AND OFF-PEAK HOURS
III. DETERMINATION OF ON-PEAK AND OFF-PEAK HOURS The following on-peak and off-peak hours are applicable to the billing of all charges stated in this schedule. - A. On-peak hours are as follows: - 1. For the period of June l through Septem...

AI summary This section defines the specific on-peak and off-peak hours applicable to the billing of charges within the schedule. On-peak hours are divided into two seasonal periods: from June 1 to September 30, they are defined as 10 a.m. to 10 p.m. on weekdays; from October 1 to May 31, they are defined as 7 a.m. to 10 p.m. on weekdays. All other hours are classified as off-peak.

IV. DETERMINATION OF DISTRIBUTION DEMAND
IV. DETERMINATION OF DISTRIBUTION DEMAND - A. Distribution Demand shall be billed only where the normal service delivery voltage is less than 69 kV. - B. The Distribution Demand billed under Paragraph JI.A.2. shall be such as may be contra...

AI summary The text defines the criteria for billing Distribution Demand in the context of utility service. It specifies that Distribution Demand applies only to service delivery voltages below 69 kV. The billed demand must be the contracted amount or, at minimum, the highest of two values: the highest average kW measured during any 30-minute interval over the current and previous billing months, or 500kW. Additionally, it establishes a minimum demand of 85 percent of the maximum kVA demand for customers with a power factor below 85 percent.

V. DETERMINATION OF rkVA DEMAND
V. DETERMINATION OF rkVA DEMAND The rkVA of demand billed shall be the highest average rkVA measured in any 30-minute interval during the current billing month. (Continued) Filed 12-18-03 Electric-Virginia Superseding Filing Effective For...

AI summary The document specifies the methodology for determining the rkVA (reactive kilovolt-ampere) of demand for billing purposes. It establishes that the billed amount shall be based on the highest average rkVA recorded during any 30-minute interval within the current billing month. This rule was filed by Electric-Virginia and was scheduled to supersede previous filings for usage starting in 2004.

VI. DETERMINATION OF ON-PEAK ELECTRICITY SUPPLY DEMAND
VI. DETERMINATION OF ON-PEAK ELECTRICITY SUPPLY DEMAND The kW of demand billed under II.B.l. shall be the highest of: - A. The highest average kW measured in any 30-minute interval of the current billing month during on-peak hours. - B. Se...

AI summary This section outlines the methodology for determining the on-peak electricity supply demand in kilowatts (kW) for billing purposes. It establishes that the billed demand will be the highest value among three criteria: the highest average kW measured in a 30-minute interval during on-peak hours in the current month, 75% of the highest kW recorded during the June-September period of the preceding 11 months, or a minimum threshold of 100 kW.

VII. DETERMINATION OF OFF-PEAK ELECTRICITY SUPPLY DEMAND
VII. DETERMINATION OF OFF-PEAK ELECTRICITY SUPPLY DEMAND The kW of demand billed under Paragraph II.B.2. shall be the off-peak demand which is in excess of 90% of the On-Peak Electricity Supply Demand determined under Paragraph VI.

AI summary This section establishes the methodology for determining off-peak electricity supply demand for billing purposes. It specifies that the kilowatt (kW) of demand to be billed is calculated as the amount of off-peak demand that exceeds 90% of the On-Peak Electricity Supply Demand as established in a preceding paragraph of the document.

X. STANDBY, MAINTENANCE OR PARALLEL OPERATION SERVICE
X. STANDBY, MAINTENANCE OR PARALLEL OPERATION SERVICE A Customer requiring standby, maintenance or parallel operation service may elect service under this schedule provided the Customer contracts for the maximum kW which the Company is to...

AI summary This section outlines the requirements and billing conditions for customers seeking standby, maintenance, or parallel operation services. To qualify, customers must contract for the maximum kW the Company can supply. Key provisions include the customer's responsibility to install and maintain suitable protective apparatus at their own expense, subject to Company inspection. Additionally, it establishes that if distribution demand exceeds the contracted demand, the contract demand will be increased accordingly, while billing remains based on the contract demand.

XII. TERM OF CONTRACT
XII. TERM OF CONTRACT The contract shall be open order unless (a) standby, maintenance or parallel operation service is provided, or (b) the Customer or the Company requests a written contract. In such cases, the term of contract for the p...

AI summary This section outlines the contract terms for electricity purchase under the specified schedule. Contracts are generally open-order unless specific conditions are met, such as the provision of standby, maintenance, or parallel operation services, or a formal written request from either the Customer or the Company. In these instances, the contract term must be mutually agreed upon for a minimum duration of one year. During this minimum term, customers may be billed under Unbundled Rate Schedule GS-4U, if applicable.

SCHEDULE CS CURT AILABLE SERVICE
SCHEDULE CS CURT AILABLE SERVICE (Continued) - II. NOTIFICATION, CURTAILMENT PROVISIONS , AND MONTHLY BILLING TO THE CUSTOMER (Continued) - D. When notification of requested curtailment is provided at a time other than during a potential c...

AI summary This section of Schedule CS outlines the notification, curtailment, and billing procedures for customers participating in a curtailable service. It specifies that customers must reduce load to their firm demand within 30 minutes of notification. Requirements include the customer's responsibility for dedicated telecommunication costs and a $50.00 monthly administrative charge. Additionally, it defines the payment structure for specific rate schedules, where payments are based on the difference between average demand during potential curtailment periods and the firm demand level.

SCHEDULE CS CURTAILABLE SERVICE
SCHEDULE CS CURTAILABLE SERVICE (Continued) - III. DETERMINATION OF PAYMENT WHERE THE CUSTOMER IS SERVED IN ACCORDANCE WITH SCHEDULE 5, SCHEDULE 6, SCHEDULE 6TS, SCHEDULE GS-2 , SCHEDULE GS-2T, SCHEDULE GS-3 OR SCHEDULE GS-4 (Continued) -...

AI summary The text outlines the payment structures and billing penalties associated with 'Curtailable Service' under various rate schedules. It specifies payment rates per kW of Curtailable Load for different seasons (Winter and Summer) and establishes reimbursement requirements for demand increases. Furthermore, it defines the methodology for billing customers for failure to curtail, applying specific multipliers to demand in excess of Summer and Winter Firm Demands. It also details payment calculations for Schedule 8, which are independent of curtailment compliance.

CONSUMPTION TAX EFFECTIVE FOR USAGE ON AND AFTER JANUARY 16, 2004
CONSUMPTION TAX EFFECTIVE FOR USAGE ON AND AFTER JANUARY 16, 2004 In accordance with the Code of Virginia §58.1-2900, a Consumption Tax, as shown below, will be applied to all kilowatt-hours consumed under the following Virginia Electric a...

AI summary The document outlines the application of a Consumption Tax on kilowatt-hours consumed under various Virginia Electric and Power Company rate schedules. It specifies that the Company is responsible for collecting and remitting the tax for bundled rate schedules and special contracts. For unbundled rate schedules, the Company remains responsible for collection unless a Competitive Service Provider bills the customer for both supply and delivery charges, in which case the provider assumes the collection and remittance responsibility.

Monthly kWh Usaae State Consumptio n Tax Rate Special Regulatory Tax Rate Local Consumption Tax Rate Total Tax Rate
Monthly kWh Usaae State Consumptio n Tax Rate Special Regulatory Tax Rate Local Consumption Tax Rate Total Tax Rate 0 to 2,500 kWh $0.00102 perk Wh $0.00008 per kWh $0.00038 per kWh $0.00148 per kWh 2,501 to 50,000 kWh $0.00065 perk Wh $0....

AI summary The document provides a table detailing the tax rates for electricity consumption based on monthly kilowatt-hour (kWh) usage tiers. It breaks down the 'Total Tax Rate' into three components: State Consumption Tax Rate, Special Regulatory Tax Rate, and Local Consumption Tax Rate. The rates decrease as the monthly usage increases, with the highest total rate of $0.00148 per kWh for usage under 2,500 kWh and the lowest rate of $0.00071 per kWh for usage exceeding 50,000 kWh.

VIRGINIA SALES AND USE TAX SURCHARGE BY RATE SCHEDULE EFFECTIVE ON AND AFTER JANUARY 1, 2006
VIRGINIA SALES AND USE TAX SURCHARGE BY RATE SCHEDULE EFFECTIVE ON AND AFTER JANUARY 1, 2006 Rate Schedule Sales and Use Tax Surcharge Per kWh 1, 1U $0.00023 1P, 1PU $0.00023 1S, 1SU $0.00023 1T, 1TU $0.00023 1W, 1WU $0.00023 GS-1, GS-1U $...

AI summary The document provides a schedule of the Virginia Sales and Use Tax Surcharge applied per kilowatt-hour (kWh) across various utility rate schedules, effective on and after January 1, 2006. It lists specific surcharge amounts for numerous rate categories, including various GS-series, 1-series, 5-series, and 25-series schedules. The text also introduces the heading for the Fuel Charge Rider-A.

TRANSMISSION SERVICE- STEPPED RATE
TRANSMISSION SERVICE- STEPPED RATE Availability: For all purposes. Supply is at 60,000 volts or higher. Customers being supplied with electricity under Schedule 1825 (Transmission Service Time-of-use) may only revert to seNice under this S...

AI summary The document specifies the 'Transmission Service- Stepped Rate' for customers supplied with electricity at 60,000 volts or higher within Rate Zone 1 (excluding the Districts of Kingsgate-Yahk and Lardeau-Shutty Bench). It defines the demand charge as $4.866 per kV.A of Billing Demand per Billing Period. It also notes specific transition rules for customers currently under Schedule 1825 (Transmission Service Time-of-use) who may revert to seNice under this schedule.

Energy Charge:
Energy Charge: A For new Customers and Customers supplied with Electricity under Schedule 1821 for less than 12 Billing Periods as of the date this Schedule becomes eff~ctive : 2.852 ¢ per kW.h for all kW.h per Billing Period a This rate w...

AI summary The document outlines the energy charge structure for customers under a specific electric tariff. It establishes a tiered pricing model based on the duration of service. New customers (less than 12 billing periods) are charged a flat rate of 2.852 ¢ per kW.h. Customers with 12 or more billing periods are subject to a tiered rate: 2.569 ¢ per kW.h for the first 90% of their Customer Billing Limit (CBL) and 5.400 ¢ per kW.h for any usage exceeding that 90% threshold.

Billing Demand:
Billing Demand: The Demand for billing purposes shall be: - 1. the highest kV.A Demand during the High Load Hours (HLH) in the Billing Period; or · - 2. 75% ofthe highest Billing Demand for the Customer's Plant in the immediately preceding...

AI summary This section outlines the methodology for determining 'Billing Demand' for industrial or commercial customers. It establishes three primary calculation methods: the highest kV.A Demand during High Load Hours (HLH), 75% of the highest Billing Demand from the preceding November to February period, or 50% of the Contract Demand specified in the Electricity Supply Agreement, whichever is highest. It also defines High Load Hours (HLH) as 06:00 to 22:00 Monday to Saturday, excluding Statutory Holidays, and provides specific rules for new customers' initial billing periods.

Monthly Minimum Charge:
Monthly Minimum Charge: $4.866 per kV.A of Billing Demand

AI summary The document specifies a Monthly Minimum Charge for customers, established at a rate of $4.866 per kV.A of Billing Demand.

Aggregation of · Customer Baseline Load:
Aggregation of · Customer Baseline Load: A Customer having two or more operating plants may elect to have a single aggregated CBL determined for all or any combination of its operating plants in accordance with the CBL Determination Guidel...

AI summary The document outlines the rules for aggregating Customer Baseline Loads (CBL) for customers with multiple operating plants under B.C. Hydro. It specifies that while energy charges can be based on an aggregated CBL, demand charges remain separate for each plant. It also defines energy quantity calculations under the Retail Access Program Agreement, including adjustments for energy loss. Additionally, it covers interim CBL determinations, proration rules upon service termination, and notes that rates are exclusive of certain taxes.

Application 5.1
Application 5.1 Rate l General Rate L applies to an annual contract whose minimum billing demand is 5,000 kilowatts or more.

AI summary The document defines the applicability of Rate l, a specific rate schedule for large-scale industrial or commercial customers. It specifies that Rate l is applicable to annual contracts where the minimum billing demand is 5,000 kilowatts or greater.

Structure of Rate L 5.2
Structure of Rate L 5.2 The structure of monthly Rate Lis as follows: $11.85 per kilowatt of billing demand; plus 2.74¢ per kilowatthour. If applicable, the credits for supply at medium or high voltage and adjustment for transformation los...

AI summary The document outlines the specific pricing structure for Rate L 5.2. The rate consists of a fixed monthly component of $11.85 per kilowatt of billing demand, plus a variable component of 2.74¢ per kilowatt-hour. It also notes that credits for supply at medium or high voltage and adjustments for transformation losses, as defined in specific articles of the tariff, may apply depending on the circumstances.

Contract power 5.3
Contract power 5.3 The contract power at Rate L must not be Jess than 5,000 kilowatts. When a customer terminates an annual contract and subscribes for another for the delivery of electricity at the same location and for similar purposes w...

AI summary The text specifies the minimum contract power requirements for customers on Rate L, establishing a floor of 5,000 kilowatts. Additionally, it defines a provision for consecutive contracts: if a customer terminates an annual contract and subscribes to a new one for similar purposes at the same location within 12 consecutive months, the two contracts are treated as a single contract for the purpose of determining contract power.

Billing demand 5.4
Billing demand 5.4 The billing demand at Rate Lis equal to the maximum power demand during the consumption period concerned, but cannot be less than the contract power, which becomes the minimum billing demand. For each overrun during an i...

AI summary The text outlines the billing demand rules for Rate Lis, stating that it is based on maximum power demand during a consumption period but is capped at a minimum of the contract power. It also specifies penalty structures for overruns during interruption periods, limiting total penalties to the amount of fixed credits paid. Furthermore, it establishes a threshold for the Distributor to terminate a commitment if penalties are incurred four times during the winter period.

General Service Large
General Service Large (Non-Residential; Customer-owned Transformation) Exceeding 750 V but NOT exceeding 30 kV

AI summary The document identifies the 'General Service Large' rate category, which applies to non-residential customers with customer-owned transformation. This category is specifically defined for electrical systems exceeding 750 V but not exceeding 30 kV.

Tariff No. 2005-60
Tariff No. 2005-60 Energy Charge: 2.284¢ /kW.h Plus Demand Charge\ : $7.089 /kV.A Exceeding 30 kV but NOT exceeding 100 kV

AI summary The document excerpt specifies the components of the energy charge for a specific voltage range (exceeding 30 kV but not exceeding 100 kV) under Tariff No. 2005-60. It details a kilowatt-hour (kW.h) energy charge of 2.284¢ and a kilovolt-ampere (kV.A) demand charge of $7.089.

Tariff No. 2005-61
Tariff No. 2005-61 Energy Charge: 2.215¢ /kW.h Plus Demand Charge\ : $6.051 /kV.A Energy Charge: 2.187¢ /kW.h Plus Demand Charge\ : $5.401 /kV.A Notes:

AI summary The document presents specific rate components for Tariff No. 2005-61, detailing two different sets of energy charges and demand charges. The first set specifies an energy charge of 2.215¢ per kW.h with a demand charge of $6.051 per kV.A, while the second set specifies an energy charge of 2.187¢ per kW.h with a demand charge of $5.401 per kV.A.

Tariff No. 2005-03(3)
Tariff No. 2005-03(3) Monthly Basic Charge: Not Exceeding 60 Amp. $6.25 Plus Energy Charge: First 175 kW.h @ 5.780¢ /kW.h. Rates, Schedules and Policies Manual

AI summary The document excerpt provides a specific rate structure under Tariff No. 2005-03(3). It specifies a monthly basic charge of $6.25 for service not exceeding 60 Amps, plus an energy charge of 5.780¢ per kW.h for the first 175 kW.h of usage. The text serves as a technical reference for pricing within the Rates, Schedules and Policies Manual.

Large Industrial Rate Schedule
Large Industrial Rate Schedule That category of Customers In all areas served by NB Power who use electricity chiefly for manufacturing or processing of goods or for the extraction of raw materials and have a minimum contracted demand of 7...

AI summary The document defines the 'Large Industrial' customer category for NB Power. This category includes customers located in all areas served by the utility who primarily use electricity for manufacturing, processing goods, or extracting raw materials, provided they have a minimum contracted demand of at least 750 kW.

Billing Demand:
Billing Demand: The greatest of: - The monthly maximum kW demand; - 90% of the maximum kVA demand; - 90% of the firm amount reserved In the contract for noncurta liable Customers or 100% of the total contracted amount for curtallable Custo...

AI summary The document outlines the methodology for determining 'Billing Demand' for industrial or commercial customers. It specifies that billing demand is calculated as the greatest value among five distinct metrics: monthly maximum kW demand, 90% of maximum kVA demand, specific percentages of contracted firm amounts based on curtailment liability (noncurta vs. curtallable), 90% of the maximum demand recorded during specific months (excluding April through November), and 90% of the lesser of the average demand from the previous calendar year or the same period excluding April through November.

Rate:
Rate: Demand Charge : $11 .09 per kW of the billing demand per month Energy Charge: 4.07¢ per kWh for all kWh per month Declining Discount Firm Rate: New facilities coming Into service after April 1, 2000 or facilities that were substantia...

AI summary The document specifies the current rate structure for a specific service category, detailing the Demand Charge of $11.09 per kW per month and an Energy Charge of 4.07¢ per kWh per month. It also outlines eligibility criteria for a 'Declining Discount Firm Rate,' which applies to new facilities commissioned after April 1, 2000, or those substantially shut down as of October 1, 2000, providing a discount on demand charges for additional firm load.

Declining Discount Firm Rate:
Declining Discount Firm Rate: The declining discount is available for five years to Customers who meet all of the following criteria: - (i) the Customer is served directly from the NB Power transmission system; - (ii) the additional firm l...

AI summary The text outlines the eligibility criteria for the 'Declining Discount Firm Rate' offered by NB Power. To qualify for this five-year discount, customers must be served directly from the NB Power transmission system, have an additional firm load of at least 5,000 kW, and enter into a five-year agreement with NB Power as the electricity supplier for the total load at the site.

Curtailable Power Credit:
Curtailable Power Credit: $3.00 per kW per month for the curtailable portion of the demand for curtailments up to 10 hours/day. Effective April 1, 1999, new or additional Curtailable Power Credits are no longer available. Start-up Rate: La...

AI summary The document specifies the 'Curtailable Power Credit' rate, which is set at $3.00 per kW per month for the curtailable portion of demand for curtailments up to 10 hours per day. It also notes a regulatory change effective April 1, 1999, stating that new or additional Curtailable Power Credits are no longer available.

ld SaskPower
ld SaskPower home > your business > business rates > customer owned tranformation

AI summary The document provides a navigation link for business customers of SaskPower to access information regarding customer-owned transformation. This pertains to the infrastructure and rate implications for businesses that own their own electrical transformation equipment.

Power - Standard
Power - Standard APPliCABILITY: To large commercial and industrial loads served through customer-owned transformation as an alternative to General Service - Standard rates. Recorded Demand - The monthly recorded demand shall be the greater...

AI summary The text defines the applicability and demand recording methodology for the 'Power - Standard' rate. This rate is intended for large commercial and industrial loads served via customer-owned transformation as an alternative to General Service - Standard rates. It specifies that monthly recorded demand is determined by comparing the maximum kV.A demand between 07:00 and 22:00 hours on weekdays (excluding holidays) against 55% of the maximum kV.A demand recorded at any other time during the month.

Billing Demand
Billing Demand The monthly billing demand shall be the monthly Recorded Demand but the billing demand shall not be less than 75% of the maximum billing demand in the preceding 11 months.

AI summary The document specifies the rules for determining monthly billing demand for customers. It establishes that the monthly billing demand is generally equal to the monthly Recorded Demand. However, it includes a floor provision stating that the billing demand cannot fall below 75% of the maximum billing demand recorded during the preceding 11-month period.

EffectiveJanuary1,2oo6
EffectiveJanuary1,2oo6 RATE CODE Supply voltage Basic Monthly Charge Demand Charge E22 E23 E24 E25 25 kV 72 kV 138 kV 230 kV $4396.oo$487t.oo$s466.oo$s778.oo per kV .A of billing demand each month$5.652 $4.082 $4.128 $4.128 Energy Charge -...

AI summary The provided text outlines the rate structure for the 'Effective January 1, 2006' period. It specifies the Basic Monthly Charge, Demand Charge, and Energy Charge for various supply voltages (25 kV, 72 kV, 138 kV, and 230 kV). The rates are categorized by specific rate codes (E22, E23, E24, E25) and include a minimum bill requirement consisting of the sum of the Basic Monthly Charge and the Demand Charge.

N-40RIRs Attachment SEB-NSPI - 2a, pt. 3 (Large File - 23 MB) 92 passages
Rate.
Rate. Tariff _Code_ Service Voltage Demand Charge ($/KVA) Energy Charge (¢/KWH) Monthly Service Charge ($) 327 Secondary 17.159 1.141 341.95 322 Primary 16.018 1.107 462.70 323 Subtransmission 14.719 1.088 462.70 324 Transmission 14.133 1....

AI summary The document provides a table of electricity rates across different service voltages, including Secondary, Primary, Subtransmission, Transmission, and EHV Transmission. For each voltage level, the table specifies the Demand Charge in $/KVA, the Energy Charge in ¢/KWH, and the Monthly Service Charge in dollars.

Preamble
This tariff is subject to a minimum monthly charge equal to the sum of the monthly service charge, the product of the demand charge and the monthly billing demand, the fuel cost adjustment, and the AEP/CSW Net Merger Savings Reduction Ride...

AI summary The text specifies the calculation for the minimum monthly charge applicable to the tariff. This charge is determined by summing four specific components: the monthly service charge, the demand charge multiplied by the monthly billing demand, the fuel cost adjustment, and the AEP/CSW Net Merger Savings Reduction Rider.

Fuel Cost Adjustment .
Fuel Cost Adjustment . This tariff is subject to the Company's fuel cost adjustment determined in accordance with the provisions of Item No. 23 of the Terms and Conditions of Service.

AI summary The text specifies that the tariff is subject to a fuel cost adjustment. This adjustment is determined by the Company in accordance with the provisions set forth in Item No. 23 of the Terms and Conditions of Service.

Monthly Billing Demand.
Monthly Billing Demand. The billing demands in kVA for each plant shall be taken each month as the single-highest 15-minute integrated peak in kVA, as registered at such plant during the month by a demand meter or indicator, subject to the...

AI summary The document specifies the methodology for determining monthly billing demands for electric plants. It establishes that the demand in kVA is recorded as the single-highest 15-minute integrated peak during a month, as captured by a demand meter or indicator. This measurement is subject to specific off-peak hour provisions. The text is part of a revised tariff sheet issued by John R. Sampson under the authority of the Indiana Utility Regulatory Commission.

TARIFF I.P. (Industrial Power)
TARIFF I.P. (Industrial Power) (Cont'd from Sheet No. 13) but the monthly demand so established shall in no event be less than 60 percent of the greater of (a) the customer's contract capacity or (b) the customer's highest previously estab...

AI summary The text specifies the calculation of monthly demand for Industrial Power (I.P.) customers. It establishes a floor for monthly demand, stating it shall not be less than 60 percent of either the customer's contract capacity or their highest previously established monthly billing demand from the preceding 11 months. Additionally, it clarifies that the Metered Voltage adjustment is excluded from the customer's minimum monthly billing demand.

Off-Peak Hour Provision.
Off-Peak Hour Provision. Demand created during the off-peak hours (as set forth below) shall be disregarded for billing purposes provided that the billing demand shall not be less than 60 percent of the maximum demand created during the bi...

AI summary The text outlines the 'Off-Peak Hour Provision' for industrial power customers, specifying that demand during off-peak hours is disregarded for billing purposes. However, it establishes a minimum billing demand floor: the bill must be at least 60 percent of the maximum monthly demand, 60 percent of the contract capacity, or 60 percent of the highest monthly billing demand from the previous 11 months. Off-peak hours are defined as any time outside of the 7 a.m. to 9 p.m. Monday through Friday on-peak period.

Adjustments to Rate.
Adjustments to Rate. Bills computed under the rates set forth herein will be adjusted as follows:

AI summary The document introduces a section regarding adjustments to the rates established in the proceeding. It specifies that electricity bills computed under the set rates will be subject to specific adjustments, though the specific mechanisms and details of these adjustments are not elaborated upon in this particular excerpt.

A. Power Factor
A. Power Factor The rates set forth in this tariff are subject to power factor adjustment based upon the maintenance by the customer of an average monthly power factor of 85 percent, leading or lagging, as measured by integrating meters. W...

AI summary The document outlines the power factor adjustment mechanism within the tariff. It establishes a target average monthly power factor of 85 percent for customers, whether leading or lagging, as measured by integrating meters. If the customer's power factor deviates from this 85 percent threshold, the metered kilowatt-hours (kWh) are adjusted for billing purposes by multiplying them by a specific constant derived from a provided formula involving reactive kVAh and active kWh.

B. Metered Voltage
B. Metered Voltage The rates set forth in this tariff are based upon the delivery and measurement of energy at the same voltage, thus measurement will be made at or compensated to the delivery voltage. At the sole discretion of the Company...

AI summary The text specifies that the utility's rates are based on the delivery and measurement of energy at the same voltage. It establishes that energy measurement will occur at or be compensated to the delivery voltage. The Company reserves the right to manage this compensation through three methods: using loss-compensating equipment, applying calculation formulas for losses, or utilizing multipliers on metered readings.

Terms of Contract.
Terms of Contract. Contracts under this tariff will be made for an initial period of not less than two years and shall remain in effect thereafter until either party shall give at least one year's written notice to the other of the intenti...

AI summary This section outlines the standard terms of contract for services provided under the tariff. Contracts are established for a minimum initial period of two years, with a requirement for one year's written notice for termination. The Company maintains the right to mandate longer initial contract periods when new facilities are required. Additionally, the Company is not obligated to supply capacity beyond the contracted amount unless mutually agreed upon by both parties.

Special Terms and Conditions.
Special Terms and Conditions. This tariff is subject to the Company's Terms and Conditions of Service. A customer's plant is considered as one or more buildings which are served by a single electrical distribution system provided and opera...

AI summary This section outlines the special terms and conditions for a specific electrical service tariff. It defines a 'customer's plant' as one or more buildings served by a single distribution system. It specifies that the Company reserves the right to connect circuits to different points on a customer's system if load size necessitates multi-circuit delivery. Additionally, it establishes requirements for customers seeking standby or backup service, requiring a contract for a maximum demand of at least 1,000 kVA.

TARIFF I.P. (Industrial Power)
TARIFF I.P. (Industrial Power) (Cont'd from Sheet No. 13.2) The Company shall not be obligated to supply demands in excess of that contracted for. Where service is supplied under the provisions of this paragraph, the billing demand each mo...

AI summary The text specifies the terms for Industrial Power (IP) service, stating that the Company is not required to supply demand exceeding contracted amounts. For instances where service is provided beyond the contract, billing is based on the highest demand recorded across the current and previous two billing periods, subject to established minimum charges. Additionally, it notes that customers with cogeneration or small power production facilities may utilize specific alternative tariffs or enter into special agreements.

Economic Development Rider.
Economic Development Rider. An Economic Development Rider (Sheet Nos. 30, 30.1, 30.2, and 30.3) is available to customers qualifying for service under the provisions of this tariff.

AI summary The document introduces the Economic Development Rider, which is a specific tariff component available to customers who meet the eligibility criteria outlined in the tariff's provisions. The rider is detailed across multiple sheets (30, 30.1, 30.2, and 30.3).

TARIFF I.R.P. (Interruptible Power)
TARIFF I.R.P. (Interruptible Power) This tariff is withdrawn except for customers receiving service or who have applied for service under this tariff prior to April 1, 1995.

AI summary The document states that the Interruptible Power (I.R.P.) tariff is being withdrawn. The only exception to this withdrawal applies to customers who were already receiving service under this specific tariff or who had applied for service under it before April 1, 1995.

Fuel Cost Adjustment.
Fuel Cost Adjustment. This tariff is subject to the Company's fuel cost adjustment determined in accordance with the provisions of Item No. 23 of the Terms and Conditions of Service. (Cont'd on Sheet No. 14.2) ISSUED BY JOHN R. SAMPSON VIC...

AI summary The document specifies that the tariff is subject to the Company's fuel cost adjustment, as governed by Item No. 23 of the Terms and Conditions of Service. It notes that the tariff was issued by John R. Sampson, Vice President, and is effective for electric service rendered on or after July 30, 2001, under the authority of the Indiana Utility Regulatory Commission.

Monthly Billing Demand.
Monthly Billing Demand. The billing demand in kVA for each plant shall be taken each month as the single highest 15-minute integrated peak in kVA, as registered at each plant during the month by a demand meter or indicator, subject to the...

AI summary The text specifies the methodology for determining the monthly billing demand for plants in kVA. The demand is based on the single highest 15-minute integrated peak recorded during the month by a demand meter, subject to off-peak hour provisions. However, the demand cannot fall below 60 percent of the greater of the customer's contract capacity or their highest monthly billing demand from the previous 11 months, with an absolute minimum floor of 10,000 kVA.

Off-Peak Hour Provision.
Off-Peak Hour Provision. Demand created during the off-peak hours (as set forth below) shall be disregarded for billing purposes provided that the billing demand shall not be less than 60 percent of the maximum demand created during the bi...

AI summary The text outlines the 'Off-Peak Hour Provision' for billing demand. It specifies that demand during off-peak hours (outside of 7 a.m. to 9 p.m., Monday through Friday) can be disregarded for billing, provided the resulting billing demand is at least 60 percent of the month's maximum demand, 60 percent of the contract capacity, or 60 percent of the highest billing demand from the previous 11 months. Additionally, a minimum monthly billing demand of 10,000 kVA is established.

Power Factor Adjustment.
Power Factor Adjustment. The rates set forth in this tariff are subject to power factor adjustment based upon the maintenance by the customer of an average monthly power factor of 85 percent, leading or lagging, as measured by integrating...

AI summary The document outlines the power factor adjustment mechanism within the tariff. Customers are required to maintain an average monthly power factor of at least 85 percent, whether leading or lagging, as measured by integrating meters. If the power factor falls outside this 85 percent threshold, the metered kilowatt-hours (kWh) are adjusted for billing purposes by multiplying them by a specific constant derived from a formula involving the ratio of reactive kilowatt-ampere hours (RKVAH) to kilowatt-hours (KWH).

AEP/CSW Net Merger Savings Reduction Rider.
AEP/CSW Net Merger Savings Reduction Rider. This tariff is subject to the AEP/CSW Net Merger Savings Reduction Rider (Sheet No. 31). EFFECTIVE FOR ELECTRIC SERVICE RENDERED ON AND AFTER JULY 30, 2001 ISSUED UNDER AUTHORITY OF THE INDIANA U...

AI summary The document snippet introduces a specific tariff provision regarding the AEP/CSW Net Merger Savings Reduction Rider. It indicates that the tariff is subject to this rider, which was issued under the authority of the Indiana Utility Regulatory Commission conference on July 25, 2001, and became effective for electric service rendered on or after July 30, 2001.

RATE CLASS ENERGY CREDIT (¢/KWH)
RATE CLASS ENERGY CREDIT (¢/KWH) RS 0.0883 SGS 0.1143 MGS/IS 0.0840 LGS 0.0704 QP/CS-IRP 0.0728 IP/IRP/CS-IRP 0.0506 MS 0.0874 WSS 0.0575 EHS 0.0888 EHG 0.0900 OL 0.1580\ SL 0.0873\ \ The Energy Credits for the OL and SL Rate Classes are r...

AI summary The document provides a schedule of Energy Credits (¢/KWH) for various rate classes, including RS, SGS, MGS/IS, LGS, QP/CS-IRP, IP/IRP/CS-IRP, MS, WSS, EHS, EHG, OL, and SL. It notes that for the OL and SL Rate Classes, these credits are applied as reductions in monthly lamp rates, with specific exceptions for metered lamps under Tariff S.L.C.M. and lamps served under Tariff-F.W.-S.L.

22. Employees Discount.
22. Employees Discount. Regular employees who have been in the Company employ for six months or more and are the head of the family or mainly responsible for maintenance of the premises they occupy may, at the discretion of the Company, se...

AI summary The document outlines the eligibility criteria and specific rate structures for employee discounts on residential electric bills. Regular employees with at least six months of service who are primarily responsible for their residence may receive bill reductions. It specifies various rate tiers, including standard service charges, discounted rates for approved energy-storage or load-management water-heating systems, and time-of-day (TOD) rates with distinct on-peak and off-peak pricing.

23. Fuel Cost Adjustment.
23. Fuel Cost Adjustment. A. The energy charges set forth in all rate schedules and those energy charges that are either included in the capacity or demand charges of such rate schedules or in the minimum billings under such rate schedules...

AI summary The document outlines the formula for the Fuel Cost Adjustment (FCA) for electric service. It specifies that energy charges in all rate schedules, including capacity or demand charges and minimum billings, will be adjusted based on a specific calculation. The adjustment factor is determined by the ratio of estimated fuel expenses (F) to a base value (S), minus a constant of $0.008609 per kWh. The fuel expense 'F' is based on a three-month average cost beginning the month following the current billing cycle.

TERMS AND CONDITIONS OF SERVICE
TERMS AND CONDITIONS OF SERVICE (Cont=d from Sheet No. 3.18) - B. The adjustment factor as computed above shall be further modified to allow the recovery of gross receipts taxes and other similar revenue based tax charges occasioned by the...

AI summary The text outlines the terms and conditions for fuel cost adjustments, specifically detailing how adjustment factors are modified to recover gross receipts taxes and reconcile differences between billed and experienced incremental fuel costs. It notes that certain provisions are suspended due to a 2005 Settlement Agreement (Cause No. 42045-S1). During this suspension, I&M is required to file semi-annual applications for fixed fuel adjustment charges, supported by testimony ensuring costs are not offset by operating expense decreases and that returns do not exceed authorized levels.

ISSUED UNDER AUTHORITY OF THE INDIANA UTILITY REGULATORY COMMISSION DATED AUGUST 23, 2006 IN CAUSE NO. 38702-FAC57
ISSUED UNDER AUTHORITY OF THE INDIANA UTILITY REGULATORY COMMISSION DATED AUGUST 23, 2006 IN CAUSE NO. 38702-FAC57 1/97 _ 2) _ _ • (Rev Ф - - 1 ~ 0 \circ Ŧ _ - 661H002 0 _ = = HOLE HOLE ı _ ı といって 1 > 1 ٠, 1 × H 1 d 1 F DRM NO. 1 3 P. S. C...

AI summary This document excerpt outlines the availability provisions for a specific electric service rate schedule (DRM NO. 1) issued by the Indiana Utility Regulatory Commission. It specifies that the service is intended for customers using electricity for purposes other than residential use, provided it is through a single meter unless otherwise economical for the company. It also establishes that service will not be provided where the ultimate use is primarily residential and categorizes eligible customers based on secondary voltage levels.

MINIMUM MONTHLY BILL:
MINIMUM MONTHLY BILL: The Minimum Monthly Bill shall be equal to the sum of the Customer Charge, Facilities Charge, Demand Charge, and Reactive Demand Adjustment.

AI summary The document defines the calculation for the Minimum Monthly Bill, stating that it is determined by the sum of four specific components: the Customer Charge, Facilities Charge, Demand Charge, and Reactive Demand Adjustment.

FILED AUG 01 1999
FILED AUG 01 1999 April 23, 1999 DATE EFFECTIVE August 1, 1999 DATE OF ISSUE month day Year DATE EFFECTIVE. month day Year ISSUED BY J. S. Latz e President 1201 W alnut, Kansa s City, Mo. v 8/9 - 8 _ > (Rev 00 = 2 0 0 H002 _ - 661 m Form =...

AI summary This document excerpt outlines the demand and usage calculation methodologies for Large Power Service (LPS) under a schedule issued by the Kansas City Power & Light Company (KCPL). It specifies the minimum demand requirements for various voltage levels (Secondary, Primary, Substation, and Transmission) and defines the formulas for calculating Monthly Maximum Demand, Ties Demand, and Billing Demand. Additionally, it establishes the methodology for determining monthly kilowatt-hour (kWh) usage based on the Monthly Maximum Demand.

APPLICABLE.
APPLICABLE. To Tariffs R.S., R.S.-L.M.-T.O.D. R.S.-T.O.D., S.G.S., M.G.S., M.G.S.-T.O.D., L.G.S., Q.P., C.I.P.-T.O.D., C.S.-I.R.P., M.W.,.O.L., and S.L. 1. The fuel clause shall provide for periodic adjustment per kwh of sales equal to the...

AI summary The document outlines the methodology for calculating the fuel cost adjustment factor within the utility's tariff. It specifies a formula to adjust for the difference in fossil fuel costs per kWh between base and current periods. Key components of the fuel cost (F) calculation include costs from owned/leased plants, energy purchased on an economic dispatch basis, and costs associated with forced outages (defined as nonscheduled losses exceeding six hours). It also specifies inventory costing methods and rules for including costs from Acts of God or other external disruptions.

NAME TITLE ADDRESS Issued by authority of an Order of the Public Service Commission in Case No. 2005-00341 dated March 14. 2006
NAME TITLE ADDRESS Issued by authority of an Order of the Public Service Commission in Case No. 2005-00341 dated March 14. 2006 Original Sheet No. 28-1 Cnnceling Sheel No. 28-1 P.S.C. ELECTRIC NO. 8

AI summary The document is a formal notice regarding the cancellation of Original Sheet No. 28-1 of the P.S.C. Electric No. 8 tariff. It was issued under the authority of an Order from the Public Service Commission in Case No. 2005-00341, dated March 14, 2006.

A VA ILABJLITY OF SERVICE.
A VA ILABJLITY OF SERVICE. To Tariffs R.S .• R.S.-L.M.-T.O.D., R.S.-T.O.D., S.G.S., M.G.S., M.G.S.-T.O.D., L.G.S., Q.P., C.I.P.-T.O.D .. C.S.-l.R.P .. M.W., O.L. ru1d S.L. Service Tariff All Other C.I.P.-T.O.D. Energy Charge per KWH per mo...

AI summary The document excerpt specifies energy charge rates for various service tariffs, specifically highlighting the 'All Other C.I.P.-T.O.D.' category. It provides a monthly energy charge of $0.000824 per KWH, while also listing multiple other tariff categories such as R.S., R.S.-L.M.-T.O.D., and various Large, Medium, and Small Group Service (L.G.S., M.G.S.) rates. The text serves as a formal pricing schedule within a regulatory tariff filing.

RATE CALCULATION.
RATE CALCULATION. - I. Pursuant to the finn! order of the Kentucky Public Service Commission in Case No. 2004-00420 and the Settlement and Stipulation Agreement dated October 20, 21l04 as filed and approved by the CoJnmission.-Kentucky Pow...

AI summary The document outlines the rate calculation and recovery mechanism for Kentucky Power Company regarding the 18-year extension of the Rockport Unit Power Agreement (UPSA). It specifies that Kentucky Power is authorized to recover supplemental annual payments (ranging from $5.1 million to $6.2 million) via surcharges applied to retail ratepayers. These revenues are allocated between CIP-TOD and 'All Other' tariff customers based on their proportion of total annual retail revenue and are collected on a KWH basis. Base rates will continue to include underlying UPSA costs.

AVAILABILITY OF SERVICE
AVAILABILITY OF SERVICE Available to, and mandatory for, all customers served primary or transmission voltage, with an average demand of 5,000 kilowatts or greater, subject to the following guidelines: - (1) Customers being served on this...

AI summary The text outlines the eligibility criteria and operational guidelines for a specific electricity rate schedule. It is mandatory for customers served at primary or transmission voltages with an average demand of at least 5,000 kilowatts. It specifies conditions for moving customers to non-time-differentiated rates if demand drops below the threshold, mandates customer notification of operational changes, and sets a maximum load limit of 50,000 kilowatts, requiring custom contracts for higher requirements.

Customer Charge: $120.00 per month
Customer Charge: $120.00 per month Maximum Load Charge: _ Primary Ţ ransmission On-Peak Demand . $4 1.58 per KW $ 4.39 per KW Off-Peak Demand Control of the Control of the Control of the Control of the Control of the Control of the Control...

AI summary The document outlines the specific rate components for a customer charge, including a fixed monthly fee of $120.00. It details the Maximum Load Charges for both On-Peak and Off-Peak Demand, categorized by Primary, Transmission, and Control components, with rates expressed in dollars per kilowatt (KW). Additionally, it specifies an Energy Charge of 2.516 cents per kilowatt-hour (KWH).

ELECTRIC RATE SCHEDULE LCI-TOD
ELECTRIC RATE SCHEDULE LCI-TOD Large Commercial/Industrial Time-of- Day Service

AI summary The document fragment introduces the Electric Rate Schedule LCI-TOD, which pertains to Large Commercial/Industrial Time-of-Day Service. It serves as a heading for specific rate structures and service terms applicable to large-scale commercial and industrial customers who utilize electricity on a time-of-day basis.

DETERMINATION OF MAXIMUM LOAD
DETERMINATION OF MAXIMUM LOAD The load will be measured and will be the average KW demand delivered to the customer during the 15-minute period of maximum use during the appropriate rating period each month. The Company reserves the right...

AI summary The text defines the methodology for determining and measuring a customer's maximum load for billing purposes. It establishes that load is measured as the average KW demand during the 15-minute peak period each month. The Company maintains the option to use KVA meters, applying a 90 percent multiplier to the KVA measurement. Alternatively, if a KVA meter is not used, the Company may adjust the measured maximum KW load based on a formula that accounts for power factors below 90 percent.

RATING PERIODS
RATING PERIODS The rating periods applicable to the Maximum Load charges shall be as follows: On-Peak Period during Summer Billing Months of June through September is defined as weekdays from 10:00 a.m. to 9:00p.m., Eastern Standard Time,...

AI summary The text defines the specific rating periods used to calculate Maximum Load charges across the Company's service area. It distinguishes between 'On-Peak' and 'Off-Peak' periods for different seasons. Summer On-Peak periods occur on weekdays from 10:00 a.m. to 9:00 p.m. during June through September, while Winter On-Peak periods occur on weekdays from 8:00 a.m. to 10:00 p.m. during October through May. Off-Peak periods encompass all other hours, including weekends.

MINIMUM ANNUAL CHARGE
MINIMUM ANNUAL CHARGE Service under this schedule is subject to an annual minimum of $54.96 per kilowatt for primary and $52.68 per kilowatt for transmission on-peak delivery for each yearly period based on the greater of (a), (b), (c), (d...

AI summary The document outlines the Minimum Annual Charge for primary and transmission on-peak delivery services. The annual minimum is determined by the greatest of five criteria, including the highest monthly on-peak maximum load, contract capacity, sixty percent of specified facility capacity, fixed annual amounts ($27,800 for primary; $263,400 for transmission), or adjustments for abnormal investments. Customers must make monthly payments of at least 1/12 of the annual minimum, with excess payments applied as credits.

TERMS AND CONDITIONS
TERMS AND CONDITIONS The customer, in order to earn the Primary or Transmission Service Rate must own and maintain or lease, at the Company's option, all transformers and other facilities necessary to take service at the Primary or Transmi...

AI summary The document outlines the specific terms and conditions for customers seeking to obtain Primary or Transmission Service Rates. It stipulates that customers must own, maintain, or lease all necessary transformers and facilities required to receive service at the delivered voltage, subject to the Company's options. The terms were issued on July 20, 2004, and became effective on October 31, 2004.

AVAILABILITY OF SERVICE
AVAILABILITY OF SERVICE This schedule is a mandatory rider to all electric rate schedules. (1) The charge per KWH delivered under the rate schedules to which this fuel clause is applicable shall be increased or decreased during each month...

AI summary This document outlines a mandatory fuel clause rider for electric rate schedules, establishing the formula for monthly adjustments to the charge per KWH. The adjustment factor is based on the ratio of fossil fuel expenses (F) to KWH sales (S) between a base and current period. It specifies how to calculate fuel costs, including inclusions for forced generation or transmission outages, exclusions for economic dispatch purchases, and provisions for fuel costs recovered through inter-system sales.

FAC Fuel Adjustment Clause
FAC Fuel Adjustment Clause - (4) Sales (S) shall be all KWH's sold, excluding inter-system sales. Where, for any reason, billed system sales cannot be coordinated with fuel costs for the billing period, sales may be equated to the sum of (...

AI summary This document outlines the technical specifications and methodology for the Fuel Adjustment Clause (FAC). It defines 'Sales' as all KWH sold excluding inter-system sales, with specific protocols for when billed sales cannot be coordinated with fuel costs. It specifies that the cost of fossil fuel includes only the invoice price minus discounts, including transportation to the unloading point. The document also establishes the base period (ending September 2004), the base fuel factor (1.810 cents per KWH), and the current period calculation, effective July 2005.

CONTRACT OPTION
CONTRACT OPTION Customer may, at Customer's option, contract with Company to curtail service upon notification by the Company. Requests for curtailment shall not exceed 'live hundred (500) hours per year nor shall any single request for cu...

AI summary This section outlines the contractual terms for customer-initiated service curtailment. It specifies operational limits, including a maximum of 500 hours per year, with individual requests ranging from 30 minutes to 14 hours. It details three distinct methods for measuring compliance and calculating monthly credits based on firm demand, designated curtailable load, or the option for the Company to sell a block of power to meet the curtailment request. The Company must provide at least ten minutes' notice for any curtailment request or cancellation.

Curtailable Service Rider 2
Curtailable Service Rider 2 for such power, based on existing market conditions, at the time of the curtailment request. Customer must state agreement to the purchase of power, if that is Customer's intention, and the block of power to be...

AI summary The text outlines the operational rules for the Curtailable Service Rider 2 (CSR2), specifically focusing on the 'buy-thru' option. Customers may choose to purchase a specified block of power to avoid load curtailment, provided they have three years of compliance history under CSR2. The text specifies that customers are responsible for the cost of purchased power regardless of consumption. Additionally, it establishes a credit mechanism for months where the Company does not request load curtailment based on the difference between billed and contracted demand.

RATE
RATE Customer will receive a credit against the applicable power schedule for curtailable 10JV, as determined in the preceding paragraph, times the applicable credit. Customers will be charged for the portion of each requested curtailment...

AI summary The document specifies the mechanism for providing customer credits for curtailable 10JV. Customers are eligible for a credit against their power schedule based on the amount of curtailable 10JV determined in the preceding section, multiplied by the applicable credit rate. Conversely, if a requested curtailment is not fully met, the customer will be charged for the remaining portion at the applicable charge.

Primary Transmission
Primary Transmission Demand Credit of: $ 4.19 per I0N $ 4.09 per KW Non-Compliance Charge of: $16.00 per 'r $16.00 per I0N Failure of Customer to curtail when requested to do so may result in termination of service under this rider.

AI summary This section outlines the specific pricing structure for the Curtailable Service Rider 2 (CSR2), detailing the Demand Credit and Non-Compliance Charge for both Primary and Transmission services. The Demand Credit is set at $4.19 per I0N for Primary and $4.09 per KW for Transmission. Additionally, a Non-Compliance Charge of $16.00 per I0N is applicable to Primary service. The document specifies that failure to comply with curtailment requests may lead to the termination of service.

TERMS AND CONDITIONS
TERMS AND CONDITIONS Except as speci1ied above, all other provisions of the power rate to which this schedule is a rider shall apply. Date of Issue: July 20, 2004 Issued By Date Effective: With Service Rendered On and After July 1, 2004

AI summary This document excerpt outlines the general terms and conditions for a specific power rate rider. It specifies that all provisions of the underlying power rate apply to this schedule, unless otherwise stated. The rider was issued on July 20, 2004, and became effective with service rendered on or after July 1, 2004.

2006 Montly Billing Adjustments
2006 Montly Billing Adjustments Beginning of Fuel Adjustment Factors KU Retail Monthly STOD Cost Recovery Applicable DSM ($Per Kwh) Environmental Cost Recovery Surcharge Applicable to Merger Surcredit Value Delivery Surcredit Effective Bil...

AI summary The document presents a table of monthly billing adjustments for the 2006 period, specifically focusing on various rate components for Industrial Power (I.P.). It details monthly values for fuel adjustment factors, cost recovery applicable to Rate LP, DSM (Demand Side Management) costs, and environmental cost recovery surcharges. Additionally, it tracks Merger Surcredits and Value Delivery Surcredits as percentages of the total bill across different billing cycles from January to December 2006.

MONTHLY RATE
MONTHLY RATE Tariff Code Service Voltage Charge per KW Excess Demand Charge per KW Charge per KWH Service Charge 322 Primary $8.70 $2.57 2.302 cents $ 240.00 323 Subtransmission $7.79 $1.61 2.269 cents $ 730.00 324 4 Transmission $7.60 $1....

AI summary The document outlines the monthly rate structures for three specific tariff codes (322, 323, and 324) based on service voltage levels: Primary, Subtransmission, and 4 Transmission. Each tariff specifies a charge per KW, an excess demand charge per KW, a charge per KWH, and a fixed service charge. Additionally, it defines a reactive demand charge of $0.75 per KVAR for lagging reactive demand exceeding 50 percent of the metered KW demand.

MINIMUM CHARGE
MINIMUM CHARGE This tariff is subject to a minimum monthly charge equal to the sum of the service charge, the product of the demand charge and the monthly billing demand and the fuel clause adjustment.

AI summary The text defines the components of the minimum monthly charge for a specific tariff. It specifies that the minimum charge is calculated as the sum of three distinct components: the base service charge, the product of the demand charge multiplied by the monthly billing demand, and the fuel clause adjustment.

FUEL CLAUSE
FUEL CLAUSE When the unit cost of fuel in the charges for power purchased from Appalachian Power Company under Federal Energy Regulatory Commission rate schedule No. 23 is above or below a base unit price of 15.8563 mills per KWH, adjusted...

AI summary The document outlines the fuel clause mechanism for power purchased from Appalachian Power Company under Federal Energy Regulatory Commission rate schedule No. 23. It establishes a base unit price of 15.8563 mills per KWH, adjusted for losses. The clause dictates that the customer's bill will be increased or decreased based on the difference between the actual unit cost of fuel and this base price, using the most recent available calendar month's data.

DETERMINATION OF DEMAND
DETERMINATION OF DEMAND The billing demand in KW shall be taken each month as the single highest 30-minute integrated peak in KW as registered during the on-peak period by a demand meter or indicator. The monthly billing demand so establis...

AI summary The text establishes the methodology for determining monthly billing demand in KW and reactive demand in KVARS. Billing demand is defined as the single highest 30-minute integrated peak during the on-peak period, with a minimum floor based on contract capacity, historical demand, or 3,000 KW. It also defines the on-peak and off-peak billing periods, specifying the hours for weekdays, weekends, and specific legal holidays.

METERED VOLTAGE
METERED VOLTAGE The rates set forth in this tariff are based upon the delivery and measurement of energy at the same voltage, thus measurement will be made at or compensated to the delivery voltage. At the sole discretion of the Company, s...

AI summary The document outlines the tariff rules for metered voltage, stating that energy rates are based on delivery and measurement at the same voltage. It establishes that the Company has the discretion to compensate for voltage differences using loss-compensating equipment, formulas, or specific multipliers. Specifically, it defines multipliers for measurements taken at the low-side of customer-owned transformers (1.01) and the high-side of Company-owned transformers (0.98) to adjust KWH and KW values for billing purposes.

SPECIAL TERMS AND CONDJTTONS
SPECIAL TERMS AND CONDJTTONS This tariff is subject to the Company's Terms and Conditions of Service. This tariff is also available to customers having other sources of energy who desire to purchase standby or back-up service from the Comp...

AI summary This section outlines the special terms and conditions for customers seeking standby or back-up service from the Company while maintaining other energy sources. Customers must contract for a maximum demand of at least 3,000 KW, with the Company not obligated to supply excess demand. Billing for such service is based on the highest demand recorded over the current and previous two billing periods. Additionally, the Company reserves the right to connect circuits to different points on a customer's distribution system if the load size necessitates multiple circuits.

7. Credits
7. Credits Pursuant to the provisions of this fuder, a permanent Purchased Power Adjustment fuder credit will be applied to each lcilowatt-hour as billed under the Company's filed tariffs, except in the case of the Company's OL tariff whic...

AI summary The document establishes the application of a permanent Purchased Power Adjustment credit to each kilowatt-hour billed under the Company's tariffs. It specifies that while the credit applies generally to all tariffs, the OL tariff will be treated differently, with the credit applied on a per lamp equivalent basis.

The Purchased Power Adjustment fuder credit applicable to each tariff is set below:
The Purchased Power Adjustment fuder credit applicable to each tariff is set below: Tariff Permanent ($)/KWH RS .00140 SGS .00114 MGS .00115 EHG .00123 cs .00117 PS .00138 LGS .00109 lL - .00083 OL .01154 FUEL CLAUSE RJDER

AI summary The document specifies the Purchased Power Adjustment fund credit values applicable to various electricity tariffs. It provides a table listing the permanent dollar amount per kilowatt-hour (KWH) for different service categories, including Retail Service (RS), Generation Service (SGS, MGS, LGS), and others such as Local Power (lL) and OL tariff. The values range from a credit of -0.00083 $/KWH to a charge of 0.01154 $/KWH.

Fuel Clause Adjusment .. .. .... .. ...... .... ........ ...... ........ ..... . 2.6827 mills per kWh
Fuel Clause Adjusment .. .. .... .. ...... .... ........ ...... ........ ..... . 2.6827 mills per kWh TARIFF ENERGY CHARGE FUELADJMT. TOTAL ENERGY CHARGE R.S Residential 4.873 ¢/kWh 0.26827 ¢ I kWh 5.14127 ¢ /kWh R.S E Employee 4.142 ¢ /kW...

AI summary The document provides a detailed tariff schedule for fuel clause adjustments, specifically setting the fuel adjustment at 2.6827 mills per kWh. It lists the specific total energy charges for various retail service categories, including Residential, Small General Service, Medium General Service (Primary and Secondary), and Load Management, broken down by on-peak and off-peak periods where applicable. The rates were issued on September 14, 2006, by Dana Waldo.

Effective: October 2, 2006
Effective: October 2, 2006 TARIFF ENERGY CHARGE FUELADJMT. TOTAL ENERGY CHARGE M.G.S Medium Gen. Service (cont'd) Time-of-Day On-peak 8.847 ¢I kWh 0.26827 ¢I kWh 9.11527 ¢/kWh Off-peak 2.755 ¢/kWh 0.26827 ¢I kWh 3.02327 ¢ I kWh L.G.S Large...

AI summary The document presents a tariff schedule effective October 2, 2006, detailing energy charges and fuel adjustment components for various electricity service categories. It specifies rates for Medium Generation Service (Time-of-Day), Large Generation Service (Secondary, Primary, and Subtransmission), Industrial Power (Primary, Subtransmission, and Transmission), Electric Heating General, Church Service, and Public Schools. The data provides a breakdown of the base energy charge, the fuel adjustment amount, and the resulting total energy charge per kilowatt-hour.

The requested Kingsport Power Company Tennessee Retail FAC factors are as follows:
The requested Kingsport Power Company Tennessee Retail FAC factors are as follows: For the Billing Month of Fuel Adjustment Factor (Mills/kWh) January 2006 1.2349 April 2006 1.3678 July 2006 (0.3483) Judith R Willis/AS1/AEPIN

AI summary The document presents the requested Fuel Adjustment Factor (FAC) factors for the Kingsport Power Company Tennessee Retail tariff for three specific billing months in 2006. The factors provided are 1.2349 mills/kWh for January, 1.3678 mills/kWh for April, and a negative adjustment of (0.3483) mills/kWh for July.

AVAILABILITY OF SERVICE
AVAILABILITY OF SERVICE This schedule is available for three-phase power and lighting service to industrial customers whose monthly demand is equal to or greater than 2,000 kilowatts, the customer to furnish and maintain all necessary tran...

AI summary This section outlines the eligibility criteria for the industrial three-phase power and lighting service schedule. It specifies that industrial customers must have a monthly demand of at least 2,000 kilowatts and are responsible for providing and maintaining their own transformation and voltage regulatory equipment. The Company maintains the right to refuse new loads exceeding 50,000 kilowatts. Furthermore, it defines 'industrial' activity as manufacturing or other activities where lighting accounts for no more than 10% of total usage.

RATE
RATE Customer Charge: $120.00 per delivery point per month Demand Charge: Basic Demand Charge Secondary Distribution . . . . . . $4.62 per KW per month Primary Distribution . . . . . . . $3.52 per KW per month Transmission Line . . . . . ....

AI summary The document outlines the rate structure for a Kentucky electric utility, specifically detailing customer charges and demand charges. It specifies a monthly customer charge of $120.00 per delivery point. Demand charges are categorized by distribution level (Secondary, Primary, and Transmission) and are based on the highest average load recorded in 15-minute intervals, with specific minimum thresholds for peak periods and seasonal maximums. The document is a formal rate sheet issued by the utility's legal counsel.

Large Power Industrial Time-of-Day Rate
Large Power Industrial Time-of-Day Rate SUMMER PEAK PERIOD is defined as weekdays from 10 A.M. to 9 P.M, Eastern Standard Time, during the 4 billing periods of June through September. WINTER PEAK PERIOD is defined as weekdays from 8 A.M ....

AI summary The document defines the specific timeframes for 'SUMMER PEAK PERIOD' and 'WINTER PEAK PERIOD' under the Large Power Industrial Time-of-Day Rate. The Summer Peak Period covers weekdays from 10 A.M. to 9 P.M. EST between June and September. The Winter Peak Period covers weekdays from 8 A.M. to 10 P.M. EST between October and May.

POWER FACTOR PROVISION
POWER FACTOR PROVISION The monthly demand charge shall be decreased .4% for each whole one percent by which the monthly average power factor exceeds 80% lagging and shall be increased .6% for each whole one percent by which the monthly ave...

AI summary The document outlines the Power Factor Provision, which establishes a mechanism for adjusting monthly demand charges based on a customer's monthly average power factor. Customers who exceed a power factor of 80% lagging receive a 0.4% decrease for each whole one percent above that threshold. Conversely, customers with a power factor below 80% lagging face a 0.6% increase for each whole one percent below. The power factor is measured using a reactive component meter combined with a standard watt-hour meter.

The bill amount computed at the charges specified above shall be increased or decreased in accordance with the following:
The bill amount computed at the charges specified above shall be increased or decreased in accordance with the following: Fuel Adjustment Clause Sheet No. 70 Demand-Side Management Cost Recovery Mechanism Sheet No. 71 Environmental Cost Re...

AI summary The text outlines the mechanisms for adjusting bill amounts based on various riders and surcharges, including the Fuel Adjustment Clause and the Demand-Side Management (DSM) Cost Recovery Mechanism. It specifically details the rules for customer participation in the DSM Cost Recovery Mechanism, noting that customers can elect to opt out but are subject to a three-year waiting period following their last DSM program participation. Opt-out customers must pay a lump sum for previous program costs and retain the right to reverse their election.

AVAILABILITY OF SERVICE
AVAILABILITY OF SERVICE This rider shall be made available to customers seNed under the applicable power schedules who contract for not less than 1 ,000 kilowatts of their total requirements to be subject to curtailment upon notification b...

AI summary The text defines the eligibility requirements for a specific rider regarding the availability of service. It specifies that the rider is available to customers under applicable power schedules who contract for a minimum of 1,000 kilowatts of their total requirements. These customers must be subject to curtailment upon notification by the Company.

CONTRACT OPTION
CONTRACT OPTION Customer may, at Customer's option, contract with Company to curtail seNice upon notification by the Company. Requests for curtailment shall not exceed five hundred (500) hours per year nor shall any single request for curt...

AI summary The text outlines the contractual terms for a curtailable service option between a customer and a utility company. It specifies the parameters for load curtailment, including annual hour limits (500 hours), minimum and maximum durations per day (30 minutes to 14 hours), and notice requirements (10 minutes). It details three distinct contractual methods for measuring compliance and calculating monthly credits based on firm demand, contracted curtailable load, or the option to purchase power blocks during curtailment events.

Curtailable Service Rider 2
Curtailable Service Rider 2 purchase of power, if that is Customer's intention, and the block of power to be purchased shall be specified by Customer at the time Company makes the request for curtailment. Should Customer elect to purchase...

AI summary The text outlines the 'buy-thru' provision and credit mechanisms under the Curtailable Service Rider 2 (CSR2). Customers who opt to purchase power during a curtailment event are responsible for the full cost of the block of power, regardless of actual consumption. If the purchased power is insufficient to meet the curtailment request, the deficiency is treated as non-compliance. This option is only available to customers with a three-year history of compliance under CSR2. Additionally, customers receive credits in months where no curtailment is requested based on the difference between billing demand and contracted firm or curtailable demand.

AVAILABILITY OF SERVICE
AVAILABILITY OF SERVICE To all electric rate schedules

AI summary The document section titled 'AVAILABILITY OF SERVICE' serves as a heading for a regulatory provision applicable to all electric rate schedules. It establishes the framework for defining the conditions under which electric service is provided to customers, though the specific terms are not detailed in this introductory snippet.

RATE
RATE The monthly billing amount under each of the schedules to which this mechanism is applicable, including the fuel clause, shall be increased or decreased by a percentage factor calculated in accordance with the following formula. CESF...

AI summary The text outlines the calculation methodology for the Monthly Environmental Surcharge Factor (MESF). It establishes that the monthly billing amount for applicable schedules will be adjusted by a percentage factor. The formula determines the MESF by subtracting the Base Environmental Surcharge Factor (BESF) from the Current Environmental Surcharge Factor (CESF), where the CESF is calculated as the ratio of the jurisdictional total of approved environmental compliance plan revenue requirements to the total revenue for the current expense month.

APPLICABILITY OF SERVICE
APPLICABILITY OF SERVICE To all electric rate schedules excluding those customers receiving their one-time payment of the surcredit amount under the settlement agreement in PSC Case No. 2002-00430.

AI summary The document specifies the scope of applicability for the service described, stating it applies to all electric rate schedules. It explicitly excludes customers who are receiving a one-time surcredit payment as part of a specific settlement agreement under PSC Case No. 2002-00430.

SURCREDIT
SURCREDIT The monthly billing amount computed under each of the rate schedules to which this surcredit is applicable shall be adjusted by the Merger Surcredit Factor, which shall be calculated in accordance with the following formula: Merg...

AI summary The document defines the calculation method for the 'Merger Surcredit Factor,' which is used to adjust monthly billing amounts for specific rate schedules. The factor is determined by the sum of two components: MS and BA. This surcredit appears to be a mechanism to provide billing adjustments related to a merger event.

(MS) is the Merger Surcredit which is based on the total Company savings that are to be distributed to Company's customers in each 12-month period beginning July 1, 1998.
(MS) is the Merger Surcredit which is based on the total Company savings that are to be distributed to Company's customers in each 12-month period beginning July 1, 1998. Savings to be Merger Surcredit Distributed (MS) Year 1 $ 6,183,320 1...

AI summary The text defines the Merger Surcredit (MS), which represents the total savings from a merger to be distributed to customers over 12-month periods starting July 1, 1998. It provides a 10-year schedule of the savings amounts and the corresponding Merger Surcredit percentages, which increase over time before stabilizing. The actual application of these factors is subject to the Final Order in PSC Case No. 2002-00430.

TERMS OF DISTRIBUTION
TERMS OF DISTRIBUTION - 1. The total distribution to Company's customers will, in no case, be less than the sum of the amounts shown above. - 2. On or before the 21st of the first month of each distribution year following Year 1, the Compa...

AI summary This section outlines the terms of distribution for a Merger Surcredit. It mandates that the total distribution to customers cannot fall below specified amounts. The Company is required to file a status report with the Commission by the 21st of the first month of each distribution year following Year 1, including a Balancing Adjustment calculation. The Surcredit is applied to electric service bills before taxes. Additionally, the Company must submit a plan by the midpoint of Year 10 regarding the Surcredit's future disposition.

TERMS OF DISTRIBUTION
TERMS OF DISTRIBUTION (1) The total distribution to Company's customers will, in no case, be less than the sum of the amounts shown above for Year 1 through Year 5, plus one-twelfth of the amount shown for Succeeding Annual Periods for eac...

AI summary The document outlines the terms of distribution for a utility company, specifically defining the minimum total distribution to customers for a five-year period starting in 2006. It establishes a formula for calculating distribution amounts during the period the Value Delivery Surcredit is effective, ensuring that the monthly amount is not less than the sum of the Year 1 through Year 5 amounts plus one-twelfth of the Succeeding Annual Periods amount. The document was issued by John R. McCall on March 31, 2006.

LOUISVILLE GAS AND ELECTRIC COMPANY
LOUISVILLE GAS AND ELECTRIC COMPANY MONTHLY ELECTRIC ADJUSTMENTS MONTHLY GAS ADJUSTMENTS Fuel Adjustment Clause !Cents/Kwh) STOD Cost Recovery Applicable to Rate LC !Cents/Kwh) DSM RATES Rate RS Rate GS Rate & VFD & STOD {Cents Per Kwh) LC...

AI summary The document provides a historical monthly data table for Louisville Gas and Electric Company, detailing various electric and gas adjustments from late 2005 through mid-2006. Key metrics include the Fuel Adjustment Clause, STOD Cost Recovery, DSM Rates for various service categories, Environmental Cost Recovery Surcharges, Merger Surcredits, and Value Delivery Surcredits. The data tracks fluctuations in costs and surcharges for both electricity and gas supply across different retail and generation service rates.

RATE NO. 53 LARGE INDUSTRIAL ELECTRIC SERVICE
RATE NO. 53 LARGE INDUSTRIAL ELECTRIC SERVICE Available for service supplied at a single point of delivery to any East System industrial customer for power, lighting, or other uses in connection with manufacturing and processing.

AI summary The text introduces Rate No. 53, which is designated for Large Industrial Electric Service. It specifies that this rate is applicable to customers on the East System who receive power at a single point of delivery for industrial purposes, specifically including manufacturing and processing activities.

Billing Demand Charge:
Billing Demand Charge: Summer Winter For the first 10,000 kW $9.18 per kW $7.34 per kW For the next 50,000 kW $8.50 per kW $6.64 per kW For all over 60,000 kW $6.14 per kW $4.61 per kW Energy Charge: (Subject to tax adjustment, AEP and ene...

AI summary The document outlines the structure of the Billing Demand Charge, specifying a tiered rate system based on power capacity. The rates are differentiated by season (Summer and Winter), with decreasing costs per kW as the capacity exceeds specific thresholds: 10,000 kW, 50,000 kW, and 60,000 kW. Additionally, it notes that the Energy Charge is subject to tax adjustments and energy efficiency costs.

Minimum Charge:
Minimum Charge: The minimum monthly bill shall be the basic service charge, applicable energy charges, and billing demand charges for the month. Issued: February 1, 1999 Issued by: James J. Howard Vice President Effective March 1, 1999 Ori...

AI summary This document defines the composition of the minimum monthly bill for customers. It specifies that the minimum charge is calculated by summing the basic service charge, applicable energy charges, and billing demand charges for a given month. The policy was issued by James J. Howard and became effective on March 1, 1999.

REACTIVE DEMAND CHARGE:
REACTIVE DEMAND CHARGE: A reactive demand charge of thirteen cents per month shall be made for each kilovar by which the customer's maximum reactive demand in kilovars is greater than 50 percent of the customer's maximum kilowatt demand in...

AI summary The text establishes the rules for a reactive demand charge applied to customers whose maximum reactive demand exceeds 50 percent of their maximum kilowatt demand in a given month. The charge is set at thirteen cents per month per kilovar. Additionally, it specifies a 'minimum billing' rule, where the monthly charge must be at least equal to the highest reactive demand charge applied during the current month or any of the preceding eleven months.

MAXIMUM DEMAND:
MAXIMUM DEMAND: The maximum kilowatt demand in any month shall be the highest thirty-minute kilowatt demand established during the month. The maximum kilovar demand in any month shall be the highest thirty-minute kilovar demand established...

AI summary The document provides the technical definitions for 'maximum kilowatt demand' and 'maximum kilovar demand' within a monthly period. It specifies that these values are determined by identifying the highest thirty-minute demand recorded for kilowatts and kilovars, respectively, during a given month.

BILLING DEMAND:
BILLING DEMAND: The billing demand for any month shall be the greater of: (a) the maximum kilowatt demand which has been measured during the daytime periods between 8:00 a.m. and 8:00 p.m. (Monday through Friday during the month excluding...

AI summary The document defines the methodology for calculating the monthly billing demand for customers. It establishes that the billing demand is determined by identifying the highest value among four criteria: the maximum kilowatt demand measured during specific daytime periods (Monday through Friday, excluding US holidays), 90% of the previous eleven-month maximum demand for June through September, 50% of the previous eleven-month maximum demand for all other months, or a floor of 10,000 kilowatts.

GENERAL:
GENERAL: Service hereunder is subject to the Rules and Regulations of the Company and applicable Riders included in this electric tariff schedule. Issued: November 9, 1995 Issued by: Brent E. Gale Vice President-Law and Regulatory Affairs...

AI summary This document serves as a general introductory notice for an electric tariff schedule. It specifies that all services provided under the schedule are governed by the Company's internal Rules and Regulations, as well as specific Riders. The document was issued by Brent E. Gale on November 9, 1995, with an effective date of December 15, 1995, and serves as the 1st Revised Sheet No. E-23.

RIDER NO.4 INTERRUPTIBLE POWER SERVICE Applicable to Rate Nos. 22, 41, 42 and 53
RIDER NO.4 INTERRUPTIBLE POWER SERVICE Applicable to Rate Nos. 22, 41, 42 and 53 Availability of Rider No. 4 is limited to customers taking service under this rider on N December 31 , 1996, and only on the amount of service under contract...

AI summary The document defines the terms and limitations of Rider No. 4, which provides Interruptible Power Service to specific customers. Eligibility is restricted to those who contracted for the service by December 31, 1996, based on their service amounts as of that date. To qualify, customers must agree to interrupt at least 1,000 kW of their electric requirement upon the Company's request. The Company maintains the right to determine interruption times and durations, subject to an aggregate system load limit of 64,000 kW in the East System.

DEMAND CHARGE CREDIT:
DEMAND CHARGE CREDIT: For agreeing to interrupt electrical requirements, the customer shall receive for billing purposes the following credit against the Billing Demand Charge or a prior mutually accepted demand when the customer is billed...

AI summary The text specifies the credit amount granted to customers on Rate 22 for agreeing to interrupt electrical requirements. Customers receive a credit of $3.20 per kilowatt for all agreed-upon interruptible load, which must be refined to the nearest 100 kW based on actual metering or mutual agreement. The agreement requires a minimum of 1,000 kW of interruptible load, with any additional quantities required in 100 kW increments.

RIDER NO. 4 INTERRUPTIBLE POWER SERVICE (Cont.)
RIDER NO. 4 INTERRUPTIBLE POWER SERVICE (Cont.) Any interruptible customer shall notify the Company in writing in the event that it desires to discontinue interruptible service under this Rider and convert interruptible load to firm servic...

AI summary This text outlines the procedures for customers under Rider No. 4 (Interruptible Power Service) to discontinue interruptible service and convert their load to firm service. It specifies that customers must provide written notice to the Company, which must then return the customer to firm service as promptly as possible, subject to the Company's Rules and Regulations. The rider is applicable to Large General Service, Time-of-Use at Transmission Voltage in the North System, specifically for customers with permanent time-of-use metering.

CHARACTER: Alternating current: 60Hz; single or three phase, at transmission voltages offered by the Company, as further described in the Company's Electric Policies and Electric Rate Application.
CHARACTER: Alternating current: 60Hz; single or three phase, at transmission voltages offered by the Company, as further described in the Company's Electric Policies and Electric Rate Application. PRICES: Summer Winter Service Charge per m...

AI summary The document outlines the technical specifications and pricing structure for high-voltage alternating current (60Hz) electricity service. It details a multi-tiered rate structure including fixed service charges, peak and off-peak demand charges based on kW thresholds, reactive demand charges, and energy charges based on peak and off-peak hours. Additionally, it identifies specific adjustments for taxes, energy efficiency cost recovery, and capital additions trackers.

Large General Service, LNP/LNO , continued
Large General Service, LNP/LNO , continued DEMAND: The kW as shown by or computed from the readings of the Company's demand meter for the 15-minute period of the customer's greatest use during the month, determined to the nearest kW, but n...

AI summary The text outlines the rate structure and billing provisions for Large General Service, LNP/LNO customers. It specifies how demand (kW) and reactive demand (kVAR) are measured and billed, including a power factor threshold of 89.44% for reactive demand charges. It defines seasonal periods, establishes a minimum bill calculation including various charges and credits (such as a transformer ownership credit), and details payment terms, including a 1.5 percent monthly late payment charge.

Rider No. 57 to Electric General Service and Large General Service- Curtailment Service (con't)
Rider No. 57 to Electric General Service and Large General Service- Curtailment Service (con't) customer, provided the customer was alerted to the possibility of curtailment 12 or more hours prior to the beginning of the curtailment period...

AI summary The text outlines the operational rules for Rider No. 57, which governs the Curtailment Service for Electric General Service and Large General Service. It specifies notice requirements for curtailments intended to avoid MAPP capacity purchases (12 hours notice, with a 2-hour minimum) and those due to operating conditions. It also defines the maximum duration of curtailment periods, the annual limit of 16 such periods during summer peak months, and the methodology for randomly rotating curtailable groups. Finally, it establishes a statewide limit of 190,000 kW for total curtailable load.

DEFINITIONS:
DEFINITIONS: Curtailment Service: Electric service which includes a credit for those customers who agree, on notice from the Company, to reduce electric demand to a predetermined level (firm power level). Firm Power Level: The level to whi...

AI summary This document excerpt provides formal definitions for terms related to 'Curtailment Service' and 'Firm Power Level' within the context of the Company's electric service. It defines 'Curtailable Load' as the difference between expected load at system peak and the agreed firm power level. The text also specifies the applicability of the Large General Service Time-of-Use at Transmission Voltage Price Schedule (LXP/LXO) to the South System territory.

PRICES: Summer Winter
PRICES: Summer Winter Service Charge per meter $1,200.00 $1,200.00 Demand Charge shall be the greater of the peak demand charge or the off-peak demand charge. Peak Demand Charge: per kW for the first 600 kW of peak demand per kW for the ne...

AI summary This document outlines the specific electricity pricing structure for Summer and Winter seasons, including service charges, demand charges (peak and off-peak), and energy charges per kWh. It also details reactive demand charges, transformer ownership credits, and mentions various cost recovery adjustments including AEP, Energy Efficiency Cost Recovery, and CNS Capital Additions Tracker, all calculated on a per-kWh basis.

Large General Service, LXP/LXO , continued
Large General Service, LXP/LXO , continued DEMAND: The kW as shown by or computed from the readings of the Company's demand meter for the 15-minute period of the customer's greatest use during the month, determined to the nearest kW, but n...

AI summary This section outlines the rate structure and billing components for the Large General Service, LXP/LXO. It defines how demand (kW) and reactive demand (kVAR) are measured and billed, including a power factor threshold of 89.44% for reactive demand charges. It also specifies seasonal periods, the calculation for the minimum bill, a transformer ownership credit of $0.30 per kW, tax adjustments, and late payment penalties of 1.5% per month.

TIME-OF-USE PERIODS:
TIME-OF-USE PERIODS: Peak Periods: All time occurring after 9:00a.m., but before 10:00 p.m. each weekday, Monday through Friday, excluding specified holidays. Off-Peak Periods: All hours not designated as on-peak hours. Specified Holidays:...

AI summary This text outlines the terms for Rider No. 2 to Electric General Service and Large General Service (Curtailment Service) in the South System. Customers qualifying for this rider must demonstrate the ability to curtail 100 kW to 250 kW of load during specified periods. The rider provides annual credits per kW of curtailable load based on contract length (3-year, 5-year, or year-to-year). It also establishes reimbursement terms if a customer's failure to curtail forces the Company to purchase capacity from the Mid-Continent Area Power Pool (MAPP).

Rider No. 2 to Electric General Service and Large General Service (Except Price Schedule LCL) -Curtailment Service (can't)
Rider No. 2 to Electric General Service and Large General Service (Except Price Schedule LCL) -Curtailment Service (can't) Option B customers may request a change in the firm power level annually. In addition, on 24 hours' notice, customer...

AI summary This document outlines Rider No. 2 for Electric General Service and Large General Service regarding Curtailment Service. It details two options for customers: Option B allows for annual firm power level changes and 24-hour service cancellation (with forfeiture of summer credits), while Option A requires immediate notification for increases. The Company reviews expected loads annually and may adjust minimum firm power levels based on historical demand. It also includes provisions for standby generators, minimum billing, and tax adjustments.

Rider No.2 to Electric General Service and Large General Service (Except Price Schedule LCL) -Curtailment Service (con't)
Rider No.2 to Electric General Service and Large General Service (Except Price Schedule LCL) -Curtailment Service (con't) r customer, provided the customer was alerted to the possibility of curtailment 12 or more hours prior to the beginni...

AI summary The text outlines the operational procedures for Rider No.2 Curtailment Service, specifically regarding notice periods and duration for load curtailment. It specifies that customers must be notified 12 hours in advance, unless the Company provides 2-hour notice to avoid MAPP capacity purchases. Curtailment periods are capped at 6 hours or until notice of termination. The Company will randomly group participants by net C loads and rotate between groups. Participation is limited to a state-wide total of 190,000 kW.

ALTERNATE ENERGY PRODUCER REVOLVING LOAN FUND COST RECOVERY:
ALTERNATE ENERGY PRODUCER REVOLVING LOAN FUND COST RECOVERY: Costs are the unrecovered amount of payments to the AEP Revolving Loan Fund established in Iowa Code Section 476.46. These costs are currently reflected within the Energy Efficie...

AI summary This document clarifies the cost recovery mechanism for the Alternate Energy Producer (AEP) Revolving Loan Fund, established under Iowa Code Section 476.46. It specifies that these costs are currently integrated into the Energy Efficiency Cost Recovery clause rather than being recovered through a separate factor. The Energy Efficiency Cost Recovery clause covers unrecovered expenditures and carrying costs for ongoing programs, with annual portions allocated to major class categories and converted to a per kWh basis based on forecasted sales.

N-44RIRs 144 to 191 - SEB to NSPI - REDACTED (Large File - 10 MB) 1 passage
NOV A SCOTIA UTILITY AND REVIEW BOARD
NOV A SCOTIA UTILITY AND REVIEW BOARD IN THE MATTER OF: The Public Utilities Act, R.S.N.S. 1989, c.380 as amended IN THE MATTER OF: An Application by Nova Scotia Power Incorporated for Approval of Certain Revisions to its Rates, Charges an...

AI summary The document is a formal heading for a regulatory proceeding before the Nova Scotia Utility and Review Board. It identifies the governing legislation as the Public Utilities Act and specifies that Nova Scotia Power Incorporated is applying for approval of revisions to its rates, charges, and regulations.

N-46Rebuttal Evidence of NSPI - REDACTED (Large File - 31 MB) 1 passage
Incremental Charges
Incremental Charges 9 10 11 12 13 14 8 When questioned by NSDOE (during P-883) for clarification of how an adjustment factor would be applied to the marginal costs when SEB's load is above the CBL77 (i.e. incremental load), Dr. Stutz appea...

AI summary The text discusses the Board's decision not to adjust marginal costs for incremental load, despite significant differences between marginal cost and avoided cost for decremental load. NSPI argues that an adjustment factor should be applied to incremental load pricing to ensure costs are properly reflected. This decision is linked to the tariff credit and debit mechanism, which NSPI believes may overcredit SEB.

N-46Rebuttal Evidence of NSPI - Appendix A to J - REDACTED (Large File 27 MB) 1 passage
Tariff and Rates Issues
Tariff and Rates Issues - For the City of Charlottesville Gas Department, Mr. Crook performed a study of the interruptible service tariff in order to develop a revised tariff design and to implement a transportation-only service. - Mr. Cro...

AI summary The text outlines the professional experience of Mr. Crook regarding tariff design and rate analysis. Key highlights include developing a transportation-only service tariff for the City of Charlottesville Gas Department, preparing testimony for FERC and the District of Columbia Public Utility Commission, and researching socioeconomic impact costs for the Alaska Natural Gas Transportation System. Additionally, the text details his work with USAID and the Czech Republic's Ceske Plynarenske Podniky to develop long-run marginal cost pricing principles for gas distribution rates.

N-54Direct Testimony - Consumer Advocate Witnesses - Michael J. McGarry and Rudolph C. Krizan 1 passage
Before the Illinois Commerce Commission
Before the Illinois Commerce Commission Consultant to Illinois Power Company. Prepared 2001 required update filing for the Illinois Commerce Commission compliance filing to un-bundle utility's rate tariffs. Prepared filing requirements and...

AI summary A consultant prepared a 2001 compliance filing for the Illinois Commerce Commission on behalf of Illinois Power Company, including required updates to un-bundle utility rate tariffs and supporting analysis for the allocation of generation, transmission, and distribution costs. Testimony was also prepared by the Company's Controller.

57966Supplementary Board Order 1 passage
OP - Organization Profile
OP - Organization Profile - 1 . Latest regulated annual reports of NSPI and EMERA. - 2. Current organization chart of NSPI showing all positions reporting no further than two levels down from the President and CEO, including a full organiz...

AI summary The document outlines a list of information requests related to Nova Scotia Power Inc. (NSPI) and EMERA, including financial reports, organizational structure, asset details, maintenance schedules, fuel specifications, reliability statistics, customer data, and compliance with emissions targets.

57968Amended Board Order (and attached Schedules A to C) 19 passages
AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric energy used by any customer in a private residence for the customer's own domestic or household use, including lighting, cooking, heating, or refrigeration purposes. Upon application to t...

AI summary The domestic tariff applies to electric energy used in private residences for domestic purposes. It may also apply to outbuildings on residential property if used for personal pursuits. Commercial use of such outbuildings requires application of General or Industrial tariffs.

DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06
DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06 Any outbuilding located on residential property adjacent to a domestic dwelling and supplied electrically through a separate meter shall have rates applied in accordance with actu...

AI summary This section outlines the application of the Domestic Service Time-of-Day Tariff (Rate Code 06) to outbuildings on residential property. The tariff depends on whether the building is used for personal purposes or commercial purposes.

LARGE GENERAL TARIFF
LARGE GENERAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 12

AI summary The document provides information on the Large General Tariff, specifically for rate code 12, which applies to electrical loads of 2,000 kV.A or 1,800 kW and over.

SMALL INDUSTRIAL TARIFF
SMALL INDUSTRIAL TARIFF (Up to 249 kV.A. or 224 kW) Rate Code 21

AI summary The document outlines the Small Industrial Tariff, applicable to industrial customers with up to 249 kV.A. or 224 kW, under Rate Code 21. This section provides the foundational information for the tariff structure, though further details on rates, pricing, or regulatory considerations are not included in the provided text.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any customer, for industrial use, including farming and processing, where the regular billing demand is less than 250 kV.A or 225 kW.

AI summary The tariff applies to industrial customers with a regular billing demand less than 250 kV.A or 225 kW, covering electric power and energy supplied for industrial use, including farming and processing.

MEDIUM INDUSTRIAL TARIFF
MEDIUM INDUSTRIAL TARIFF (250 kV.A or 225 kW- 1 999 kV.A or 1 799 kW) Rate Code 22

AI summary The text provides information about the Medium Industrial Tariff, specifically Rate Code 22, which applies to electrical loads ranging from 250 kV.A or 225 kW to 1 999 kV.A or 1 799 kW.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a c...

AI summary The special conditions outline requirements for metering and billing demand. Primary metering requires a capital contribution from the customer, and billing demand below 250 kV.A may result in the withdrawal of the tariff. Adjustments to metered usage are specified for high voltage metering.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy supplied at the low voltage side of the bulk power transformer to any industrial customer having a regular billing demand of 2 000 kV.A or 1 800 kW, and over.

AI summary This tariff applies to three-phase electric power and energy supplied at the low voltage side of the bulk power transformer to industrial customers with a regular billing demand of 2,000 kV.A or 1,800 kW and over.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) At the option of the Company, supply may be at distribution voltage. Meter readings shall be increased by 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transform...

AI summary The document outlines special conditions for metering and tariff availability under a Nova Scotia utility tariff. It includes adjustments for transformer losses, capital contributions for primary metering, and criteria for withdrawing tariff availability based on customer demand and cost reduction.

LARGE INDUSTRIAL TARIFF
LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 - ( 4) The Company reserves the right to have a separate service agreement, if in the opinion of the Company issues not specifically set out herein, must be addressed...

AI summary The Large Industrial Tariff (Rate Code 23) outlines conditions for customers with high power demands, including requirements for service agreements, load management, and system integrity. The Company reserves the right to establish separate agreements and stipulates that customers must ensure their operations do not compromise the power supply system.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy, supplied at the low voltage side of the bulk power transformer, to municipal electric utilities. Meter readings shall be increased by 1. 7 5% for each transf...

AI summary This tariff applies to three phase electric power and energy supplied at the low voltage side of the bulk power transformer to municipal electric utilities. Meter readings are adjusted by 1.75% for each transformation between the meter and the low voltage side to account for transformation losses, and are reduced when metering is at transmission voltage.

Standard Energy Charge
Standard Energy Charge The standard energy charge, before accounting for shifting credits or additional charges, is 5.655 cents per kWh. This charge will apply to all Customer Baseline Load (CBL) energy, regardless of actual consumption. T...

AI summary The standard energy charge is set at 5.655 cents per kWh, applying to all Customer Baseline Load energy. The charge is calculated using NSPI's approved Cost of Service Study for the ELIIR-2 and ELI 2P-RTP tariffs combined. The charge was approved by the Nova Scotia Utility and Review Board in April 2007.

Pricing Period
Pricing Period Each hour of the day is a distinct pricing period, the day starting at the 00:00:01, the first hour ending at 01:00:00. The applicable 20 minute ahead marginal price as posted on the RTP website will apply for each such peri...

AI summary The document defines the pricing period as each hour of the day, starting at 00:00:01 and ending at 01:00:00. The applicable 20-minute ahead marginal price from the RTP website applies for each period.

Customer Baseline Load (CBL)
Customer Baseline Load (CBL) This is a flat line load shape used for the operational purpose of calculating hourly Incremental Load (IL) and Decremental Load (DL). The CBL level (in MW) is to be calculated as the average hourly demand of t...

AI summary The Customer Baseline Load (CBL) is a flat line load shape used to calculate hourly Incremental Load (IL) and Decremental Load (DL). It is based on the average hourly demand of a customer's annual forecast total energy requirement, excluding system losses, and is in effect from January 1st to December 31st of each year.

EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP)
EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP) During periods of major scheduled maintenance, the CBL will be reduced accordingly to match the operating conditions of the plant. Such events will be treated as cutouts...

AI summary During major scheduled maintenance periods, the Customer Baseline Load (CBL) will be adjusted to reflect the plant's operating conditions, and these events will be treated as cutouts without impacting the CBL for the following year.

Marginal Cost (MC)
Marginal Cost (MC) The MC will be the 20-minute ahead forecast of hourly marginal fuel and variable O&M cost in any hour, excluding any impacts of electricity exports, but including imports when they impact marginal costs. The MC forecast...

AI summary The Marginal Cost (MC) is defined as the 20-minute ahead forecast of hourly marginal fuel and variable O&M costs, excluding electricity exports but including imports. MC forecasts are calculated by NSPI based on in-province load requirements and used for billing after adjustments per the Decremental Rebate section.

Decremental Load (DL)
Decremental Load (DL) This is the hourly energy calculated as the difference between the CBL and the actual demand when actual demand is less than the CBL. When other tariffs are used below ELI 2P-RTP, DL in any hour is limited to the amou...

AI summary Decremental Load (DL) is defined as the hourly energy difference between the Customer Baseline Load (CBL) and actual demand when actual demand is less than the CBL. DL is also limited by the lower ELI 2P-RTP threshold when other tariffs are used below ELI 2P-RTP.

3.6.6 Special Conditions
3.6.6 Special Conditions - a) Special conditions in this regulation do not supersede, modify or nullify special conditions accompanying the otherwise-applicable metered tariff schedules. - b) Qualifying generating equipment must meet the f...

AI summary This section outlines special conditions for net metering, including requirements for generating equipment, ownership, and compliance with safety standards. It also details the application process and termination policies. NSPI has the authority to approve or verify compliance and may impose additional costs.

4.1 INSTALLATION AND ACCESS TO METERS
4.1 INSTALLATION AND ACCESS TO METERS Representatives of the Company shall have the right of access to connect, remove, read or test meters or other appurtenances at all reasonable hours. When suitable arrangements cannot be made for the C...

AI summary The document outlines the responsibilities of customers regarding meter installation and access. Customers must allow utility representatives access to meters at reasonable times and may be required to install outdoor meters if necessary. Costs associated with meter relocation or protection are the customer's responsibility. Non-compliance may result in service discontinuation.

57968Amended Board Order (and attached Schedules A to C) 14 passages
AVAILABILITY:
AVAILABILITY: This tariff is only available to customers employing electric-based heating systems utilizing Electric Thermal Storage (ETS) equipment, and electric in-floor radiant heating systems utilizing thermal storage and appropriate t...

AI summary This tariff is available only to residential customers using specific electric heating systems, such as Electric Thermal Storage (ETS) and electric in-floor radiant heating with approved controls. It is not available to other customers as per Section 73 of the Public Utilities Act.

DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06
DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06 Any outbuilding located on residential property adjacent to a domestic dwelling and supplied electrically through a separate meter shall have rates applied in accordance with actu...

AI summary This section outlines the application of the Domestic Service Time-of-Day Tariff (Rate Code 06) for outbuildings on residential property. It specifies that the Domestic tariff applies if the building is used for personal pursuits, while General or Industrial tariffs apply for commercial use.

LARGE GENERAL TARIFF
LARGE GENERAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 12

AI summary This section of the document outlines the Large General Tariff, specifically for electrical services with a capacity of 2,000 kV.A or 1,800 kW and over, under Rate Code 12.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy for any use except industrial, where the regular billing demand is 2 000 kV.A or 1 800 kW, and over.

AI summary The tariff applies to electric power and energy for non-industrial uses with a regular billing demand of 2,000 kV.A or 1,800 kW and over.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any customer, for industrial use, including farming and processing, where the regular billing demand is less than 250 kV.A or 225 kW.

AI summary The tariff applies to industrial customers with a regular billing demand below 250 kV.A or 225 kW, including farming and processing.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) Metering will normally be at the low voltage side of the substation. Should the customer's requirements make it necessary for the Company to provide primary metering, then the customer will be required to make a c...

AI summary Special conditions for metering and tariff availability are outlined. Primary metering requires a capital contribution from the customer, and adjustments to metered usage apply when metering is on the high voltage side. The company may withdraw the tariff if a customer's billing demand falls below 250 kV.A.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy supplied at the low voltage side of the bulk power transformer to any industrial customer having a regular billing demand of 2 000 kV.A or 1 800 kW, and over.

AI summary The tariff applies to three-phase electric power and energy supplied at the low voltage side of the bulk power transformer to industrial customers with a regular billing demand of 2,000 kV.A or 1,800 kW and over.

SPECIAL CONDITIONS:
SPECIAL CONDITIONS: - (1) At the option of the Company, supply may be at distribution voltage. Meter readings shall be increased by 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transform...

AI summary The document outlines special conditions for a tariff, including adjustments for transformer losses, capital contributions for primary metering, and criteria for withdrawing tariff availability based on demand and cost reduction.

LARGE INDUSTRIAL TARIFF
LARGE INDUSTRIAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 23 - ( 4) The Company reserves the right to have a separate service agreement, if in the opinion of the Company issues not specifically set out herein, must be addressed...

AI summary The Large Industrial Tariff (Rate Code 23) outlines terms for customers with high power demands, including the company's right to enter into separate service agreements and customer obligations to maintain power system integrity through specific operational requirements.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy, supplied at the low voltage side of the bulk power transformer, to municipal electric utilities. Meter readings shall be increased by 1. 7 5% for each transf...

AI summary The tariff applies to three-phase electric power supplied at low voltage, with meter readings adjusted by 1.75% for each transformation between the meter and the low voltage side of the bulk power supply transformer to account for transformation losses. Meter readings are reduced when metering occurs at transmission voltage.

Customer Baseline Load (CBL)
Customer Baseline Load (CBL) This is a flat line load shape used for the operational purpose of calculating hourly Incremental Load (IL) and Decremental Load (DL). The CBL level (in MW) is to be calculated as the average hourly demand of t...

AI summary The Customer Baseline Load (CBL) is a flat line load shape used to calculate hourly Incremental Load (IL) and Decremental Load (DL). It is based on the average hourly demand of a customer's annual forecast total energy requirement, excluding system losses, and is effective from January 1st to December 31st of each year.

EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP)
EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP) During periods of major scheduled maintenance, the CBL will be reduced accordingly to match the operating conditions of the plant. Such events will be treated as cutouts...

AI summary During major scheduled maintenance periods, the Capacity Bidding Limit (CBL) will be adjusted to reflect the plant's operating conditions, and these events will be treated as cutouts without impacting the CBL for the following year.

Marginal Cost (MC)
Marginal Cost (MC) The MC will be the 20-minute ahead forecast of hourly marginal fuel and variable O&M cost in any hour, excluding any impacts of electricity exports, but including imports when they impact marginal costs. The MC forecast...

AI summary The Marginal Cost (MC) is defined as the 20-minute ahead forecast of hourly marginal fuel and variable O&M costs, excluding electricity exports but including imports. NSPI calculates the MC forecast based on in-province load requirements, and the ELI 2P-RTP tariff uses the CBL value for load levels. Hourly price forecasts are provided daily, and billing uses the adjusted MC as outlined in the Decremental Rebate section.

Supply Interruption:
Supply Interruption: This tariff is interruptible for supply reasons. The customer will reduce its available interruptible system load by the amount requested by NSPI within ten (1 0) minutes of such request by the Company. Following inter...

AI summary This section outlines the requirements for supply interruption under the tariff, including customer obligations to reduce load promptly, procedures for contacting customers, penalties for non-compliance, and limitations on the frequency and duration of interruptions.

57974NSPI Compliance Filing 2007 Rate Application - REDACTED (Large File - 36 MB) 18 passages
7 3.3 Proposed Rates
7 3.3 Proposed Rates 8 9 10 II 12 NSPI developed new rates by applying the class revenue percent increases to both energy and demand charges within each rate class. No customer charges were changed. There are no changes to the interruptibl...

AI summary NSPI has proposed new rates by applying class revenue percent increases to energy and demand charges, without altering customer charges or credits. The Compliance Tariffs are detailed in Appendix 7, with updates to the Unmetered Services section. A revision to the 'CBL Base Cost' section of the ELI 2P-RTP tariff was requested in 2007 and is now operational.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric energy used by any customer in a private residence for the customer's own domestic or household use, including lighting, cooking, heating, or refrigeration purposes. Upon application to t...

AI summary The Domestic tariff applies to electric energy used in private residences for household purposes. It may also apply to outbuildings on residential property if used primarily for personal pursuits. Commercial use of such buildings requires application of General or Industrial tariffs.

NOV A SCOTIA POWER IN CORPORA TED
NOV A SCOTIA POWER IN CORPORA TED DOMESTIC SERVICE TIME-OF-DAY TARIFF (OPTIONAL) Rate Code 06 Any outbuilding located on residential property adjacent to a domestic dwelling and supplied electrically through a separate meter shall have rat...

AI summary Nova Scotia Power has approved a Domestic Service Time-of-Day Tariff (Rate Code 06) that specifies how rates are applied to outbuildings on residential property. The tariff depends on the primary use of the building, with the Domestic tariff applying if used for personal pursuits and General or Industrial tariffs if used for commercial purposes.

LARGE GENERAL TARIFF
LARGE GENERAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 12

AI summary The document outlines a section of the Large General Tariff, specifying a rate code for electrical services with a capacity of 2,000 kV.A or 1,800 kW and over.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy for any use except industrial, where the regular billing demand is 2 000 kV.A or 1 800 kW, and over.

AI summary This tariff applies to electric power and energy for uses other than industrial, specifically for regular billing demands of 2,000 kV.A or 1,800 kW and above.

LARGE GENERAL TARIFF
LARGE GENERAL TARIFF (2 000 kV.A or 1 800 kW, and Over) Rate Code 12 - (2) The Company will withdraw the availability ofthis tariff to any specific customer, if, on a consistent basis, the customer is not maintaining a billing demand of2 0...

AI summary The Large General Tariff applies to customers with a demand of 2,000 kV.A or 1,800 kW and above. The Company may withdraw the tariff from a customer if they consistently fail to maintain the required demand level. The Company also reserves the right to establish separate service and operating agreements when necessary for the benefit of both the Company and its customers.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to electric power and energy supplied to any customer, for industrial use, including farming and processing, where the regular billing demand is less than 250 kV.A or 225 kW.

AI summary This tariff applies to industrial customers with a regular billing demand below 250 kV.A or 225 kW, covering uses such as farming and processing.

MEDIUM INDUS TRIAL TARIFF
MEDIUM INDUS TRIAL TARIFF (250 kV.A or 225 kW- 1 999 kV.A or 1 799 kW) Rate Code 22

AI summary This document outlines a trial tariff for medium industrial customers with specific power capacity ranges, identified by Rate Code 22.

AVAIL ABILITY:
AVAIL ABILITY: This tariff is applicable to electric power and energy supplied to any industrial customer having a regular billing demand of250 kV.A (225 kW) and over, and for which no other rates are applicable.

AI summary The tariff applies to industrial customers with a regular billing demand of 250 kV.A (225 kW) and over, where no other rates are applicable.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy supplied at the low voltage side of the bulk power transformer to any industrial customer having a regular billing demand of 2 000 kV.A or 1 800 kW, and over.

AI summary This tariff applies to three-phase electric power and energy supplied at the low voltage side of the bulk power transformer to industrial customers with a regular billing demand of 2,000 kV.A or 1,800 kW and over.

AVAILABILITY:
AVAILABILITY: This tariff is applicable to three phase electric power and energy, supplied at the low voltage side of the bulk power transformer, to municipal electric utilities. Meter readings shall be increased by 1.75% for each transfor...

AI summary The tariff applies to three-phase electric power and energy supplied at the low voltage side of the bulk power transformer to municipal electric utilities. Meter readings are adjusted by 1.75% for each transformation between the meter and the low voltage side to account for transformation losses, and readings are reduced when metering is at transmission voltage.

Order in which Rates are Applied
Order in which Rates are Applied Customers may elect to utilize other rates below the ELI 2P-RTP. In such case, the customer will make written request to the Company, specifying the MW level above which ELI 2P-RTP is to apply. Such changes...

AI summary Customers can opt for rates below ELI 2P-RTP by submitting a written request specifying the MW level above which ELI 2P-RTP applies. Changes take effect for the next full calendar year. No other rate may be applied above ELI 2P-RTP when stacking multiple rates.

Pricing Period
Pricing Period Each hour of the day is a distinct pricing period, the day starting at the 00:00:01 , the first hour ending at 01:00:00. The applicable 20 minute ahead marginal price as posted on the RTP website will apply for each such per...

AI summary The document defines the pricing period as each hour of the day, starting at 00:00:01 and ending at 01:00:00. The applicable 20-minute ahead marginal price from the RTP website is used for each period. The text is approved by Nova Scotia Utility and.

EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP)
EXTRA LARGE INDUSTRIAL TWO PART REAL TIME PRICING TARIFF (ELI 2P-RTP) During periods of major scheduled maintenance, the CBL will be reduced accordingly to match the operating conditions of the plant. Such events will be treated as cutouts...

AI summary During major scheduled maintenance periods, the Customer Baseline (CBL) will be adjusted to reflect the plant's operating conditions, and these events will be treated as cutouts without affecting the CBL for the following year.

Marginal Cost (MC)
Marginal Cost (MC) The MC will be the 20-minute ahead forecast of hourly marginal fuel and variable O&M cost in any hour, excluding any impacts of electricity exports, but including imports when they impact marginal costs. The MC forecast...

AI summary The Marginal Cost (MC) is defined as the 20-minute ahead forecast of hourly marginal fuel and variable O&M costs, excluding exports but including imports. NSPI calculates the MC forecast based on in-province load requirements, and the CBL value is used for customers on the ELI 2P-RTP tariff. Hourly price forecasts are provided to customers daily, with major changes communicated promptly. The actual billing price is the MC adjusted according to the Decremental Rebate section.

Decremental Load (DL)
Decremental Load (DL) This is the hourly energy calculated as the difference between the CBL and the actual demand when actual demand is less than the CBL. When other tariffs are used below ELI 2P-RTP, DL in any hour is limited to the amou...

AI summary Decremental Load (DL) refers to the hourly energy difference between the Customer Baseline (CBL) and actual demand when actual demand is lower than the CBL. Under certain tariffs below ELI 2P-RTP, DL is capped between the lower ELI 2P-RTP threshold and the CBL.

Supply Interruption:
Supply Interruption: This tariff is interruptible for supply reasons. The customer will reduce its available interruptible system load by the amount requested by NSPI within ten (1 0) minutes of such request by the Company. Following inter...

AI summary This section outlines the terms and conditions for supply interruption under an interruptible tariff. Customers must reduce load within ten minutes of a request by NSPI, with penalties for non-compliance. Supply interruptions are limited to specific hours per day and week, and customers must provide contact information for load reduction.

Preamble
Metering will normally be at the low side of the transformer and, for billing purposes, meter readings will be increased by 1.75%. Should the customer's requirements make it necessary for the Company to provide primary metering, the custom...

AI summary The document outlines metering requirements, specifying that metering is typically at the low side of the transformer with a 1.75% increase in readings for billing. If primary metering is required, the customer must pay the additional cost as a capital contribution.

57987Letter - SEB - Re: Late Filed Evidence 1 passage
2. The incremental export benefit credit ("IEBC") set out in the 2P-RTP may overcompensate the customers
2. The incremental export benefit credit ("IEBC") set out in the 2P-RTP may overcompensate the customers SEB respectfully submits that this issue is not reflected in the Issues List. The IEBC is an approved part of the ELI 2P-RTP tariff an...

AI summary SEB argues that the incremental export benefit credit (IEBC) in the ELI 2P-RTP tariff is not reflected in the Issues List and that NSPI did not address it in its initial application. Mr. O'Sheasy's testimony does not adequately address the issue in the context of the current proceeding.

86472Submission - Re: Future Filing Requirements and comments on Board Draft Strawman 1 passage
OP - Organization Profile
OP - Organization Profile - 1. Latest regulated annual reports of NSPI and EMERA - 2. Current organization chart ofNSPI showing all positions reporting no further than two levels down from the President and CEO, including a full organizati...

AI summary The document outlines a list of requested information for a regulatory proceeding, including organizational profiles, financial documents, and operational data related to NSPI and EMERA. It includes details on assets, reliability statistics, customer information, and emissions targets.

86475Board Letter - Re: NSPI Future Filing Requirements - Strawman Proposal - April 10, 2007 1 passage
OP - Organization Profile
OP - Organization Profile - 1. Latest regulated annual reports of NSPI and EMERA - 2. Current organization chart of NSPI showing all positions reporting no further than two levels down from the President and CEO, including a full organizat...

AI summary This document outlines a list of information requests related to Nova Scotia Power Inc. (NSPI) and EMERA, covering financial reports, organizational structure, asset details, maintenance schedules, fuel specifications, reliability statistics, customer data, and emissions compliance.

86477Submission - Re: Rate Hearing Future Filing Requirements 1 passage
III. Financial Information / Capital Structure / ROE
III. Financial Information / Capital Structure / ROE - (a) Presentations made by NSPl / Emera to Analysts and Bondholders - (b) Most Recent Emera Proxy Statement - (c) Financial Statements, Annual Repo1ts, Etc. - (d) Average Capital and Co...

AI summary The document outlines various financial and operational topics related to Nova Scotia Power Inc. (NSPI) and Emera, including capital structure, return on equity (ROE), financial statements, debt financing, and cost of service. It also covers load forecasting and operational and maintenance (OM&G) cost breakdowns.

Disclaimer: These summaries were generated by AI from the filings they describe. We take care to make them accurate, but errors are possible - and they aren't advice. Only the filings themselves are the record: if you're relying on something here, confirm it against the source documents or the Nova Scotia Energy Board's own record. Full disclaimer →