L-1Application
11 passages
Exception - (6) Despite subsections (3) to (5), the concentration of PCBs in a product may be determined without sampling and analysis if - (a) the manufacturer's original label or specifications in respect of the product indicate the conc...
AI summary The text outlines exceptions to PCB concentration determination requirements and updates regulations regarding the release of PCBs from equipment. It allows for determining PCB concentration based on manufacturer labels or similarity to known products, and restricts the release of more than one gram of PCBs from equipment in use.
Equipment for which extension applied for - (2) The owner of equipment for which an extension has been applied for under section 17 or 17.1 must, if feasible, affix a label in a readily visible location on the equipment. - (2) Paragraph 29...
AI summary The document outlines amendments to regulations regarding the labeling of equipment for which an extension has been applied for under sections 17 or 17.1. These amendments include requirements for labeling equipment or containers if labeling the equipment itself is not feasible, and the inclusion of a unique identification number.
16 (1) Subsection 39(1) of the Regulations is replaced by the following: Date of submission of report - 39 (1) The person who is required to prepare a report in accordance with any of sections 32.1 to 32.3, any of subsections 33(1), (2) an...
AI summary This regulatory amendment modifies the deadline for submitting reports under various sections of the Regulations. Reports must now be submitted by March 31 of the calendar year following the year for which the report is made. Specific deadlines are set for reports current to December 31, 2027, 2028, and 2030.
Method of submission 42 Each report referred to in sections 32.1 to 38 shall be submitted electronically in the format provided by the Department of the Environment, but the report shall be submitted in writing if
AI summary The document specifies that reports referenced in sections 32.1 to 38 must be submitted electronically in the format provided by the Department of the Environment, with an exception for written submission in certain cases.
Background PCBs are industrial chemicals that were synthesized and commercialized in North America in 1929. They were used in the manufacturing of electrical equipment, heat exchangers, hydraulic systems and several other specialized appli...
AI summary This background section discusses the history and regulation of PCBs in Canada, including their use, environmental and health risks, and the PCB Regulations implemented in 2008 with amendments in 2015. The regulations aim to phase out PCBs, set deadlines for their destruction, and monitor progress through reporting requirements.
Description The Amendments will allow for the continued use and storage of certain PCB-containing equipment that is located at nuclear facilities. The owner of the equipment will be required to keep an up-to-date inventory that includes in...
AI summary The Amendments allow for the continued use and storage of certain PCB-containing equipment at nuclear facilities, military equipment, and in museums, with specific inventory and application requirements. They also extend the end-of-use deadline for certain electrical equipment containing PCBs to December 31, 2026, with possible extensions under certain conditions.
Consultations prior to prepublication in the Canada Gazette , Part I A discussion document was published on September 24, 2020, for a 60-day consultation period to solicit comments from interested parties. The discussion document centred o...
AI summary The Department conducted consultations on regulations related to radioactive PCBs and the import of PCB waste. Feedback was received from various industry sectors, leading to amendments in deadlines for ending the use of PCB-containing equipment and allowable storage periods. The discussion document was published in the Canada Gazette, Part I, and further consultations occurred following prepublication.
Electrical facilities scheduled for permanent closure by December 31, 2029 Summary of comments: Electrical generation, transmission or distribution facilities scheduled for permanent closure by December 31, 2029, raised concerns about whet...
AI summary Facilities scheduled for permanent closure by December 31, 2029, raised concerns about the scope of an extension related to the Regulations Amending the Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations . The extension applies to all facilities scheduled for permanent closure but not to those undergoing major upgrades.
Instrument choice To meet the objectives outlined above, it was determined that amending the Regulations was the only viable option. Maintaining the status quo was not considered feasible, as it would risk the safety of workers at nuclear...
AI summary Amending the Regulations was deemed necessary to achieve outlined objectives, as maintaining the status quo would risk worker safety at nuclear facilities, hinder historical preservation, impede military infrastructure, and burden facilities facing closure due to federal obligations.
The consensus among scientists around the world is that PCBs should be (and are) classified as probable human carcinogens. People in Canada are exposed to very small amounts of PCBs through food intake and, to a lesser extent, through air,...
AI summary The document discusses the amendments to PCB regulations, noting that they will not significantly increase exposure risks but may allow for a slower phase-out of PCB-containing equipment in certain circumstances. Extensions for equipment use are subject to specific conditions and will not require permits or additional decommissioning. Administrative costs are expected to be minimal.
One-for-one rule The one-for-one rule applies, since there is an incremental increase in administrative burden on businesses. The proposal is considered a burden IN under the rule, and no regulatory titles have been repealed or introduced....
AI summary The document discusses the application of the one-for-one rule to the proposed Amendments, which increase administrative burden on businesses. The Amendments allow facilities to continue using PCB-containing equipment beyond 2025, with associated costs including deferral applications, reporting requirements, and compliance activities.